Simultaneous measurements of two-dimensional velocity and pressure fields in compressible flows through image-intensified detection of laser-induced fluorescence
Explore the source record for details and available documents.
Hiller, Bernhard↗
SEARCH · Engineering Papers
Results for “Compressible flow”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unsteady aerodynamics of an oscillating cascade in a compressible flow field
Fundamental experiments were performed in the NASA Lewis Transonic Oscillating Cascade Facility to investigate and quantify the unsteady aerodynamics of a cascade of biconvex airfoils executing torsion-mode oscillations at realistic reduced frequencies. Flush-mounted, high-response miniature pressure transducers were used to measure the unsteady airfoil surface pressures. The pressures were measured for three interblade phase angles at two inlet Mach numbers, 0.65 and 0.80, and two incidence angles, 0 and 7 deg. The time-variant pressures were analyzed by means of discrete Fourier transform techniques, and these unique data were then compared with predictions from a linearized unsteady cascade model. The experimental results indicate that the interblade phase angle had a major effect on the chordwise distributions of the airfoil surface unsteady pressure, and that reduced frequency, incidence angle, and Mach number had a somewhat less significant effect.
Buffum, Daniel H.↗
Flexiwall 3 SO: A second order predictive strategy for rapid wall adjustment in two-dimensional compressible flow
An improvement is presented for the 2-D strategies for adjustment of the flexible top and bottom walls of an Adaptive (Wind Tunnel) Wall Test Section (AWTS). This adjustment is part of the wall adaptation process to eliminate top and bottom wall interference at the source. The improvements to account for second order effects are described in mathematical detail. It is intended that these improvements should further minimize the necessary iterations in the wall adaptation process. An associated computer program written in BASIC is presented and several test cases run with this program are discussed. The strategy performs well for a theoretical test case but when applied to experimental AWTS data some discrepancies in the adapted wall shapes are found.
Goodyer, M. J.↗
A fast approach to designing airfoils from given pressure distribution in compressible flows
A new inverse method for aerodynamic design of airfols is presented for subcritical flows. The pressure distribution in this method can be prescribed as a function of the arc length of the as-yet unknown body. This inverse problem is shown to be mathematically equivalent to solving only one nonlinear boundary value problem subject to known Dirichlet data on the boundary. The solution to this problem determines the airfoil, the freestream Mach number, and the upstream flow direction. The existence of a solution to a given pressure distribution is discussed. The method is easy to implement and extremely efficient. A series of results for which comparisons are made with the known airfoils is presented.
Daripa, Prabir↗
Adaptive remeshing for compressible flow computations
The present, quality-enhancing adaptive-mesh procedure for two-dimensional Euler equation steady state solutions is implemented by means of linear triangular elements and an explicit time-stepping scheme, in conjunction with a finite element solution algorithm. The meshes thus generated typically take the form of stretched elements in the vicinity of one-dimensional flow features; a considerable variation in element size may thereby emerge which allows the desired high-quality solutions to be obtained with commensurately high computational efficiency.
Peraire, J.↗
Adaptive finite element methods for high-speed compressible flows
An adaptive finite element algorithm for solving the unsteady Euler equations is described. The finite element algorithm is based on a Taylor/Galerkin formulation and uses a very fast and efficient data structure to refine and unrefine the grid in order to optimize the approximation. A general version of the method which can be applied to moving grids with sliding interfaces is given, and results for a transient supersonic calculation of rotor-stator interaction are presented.
Oden, J. T.↗
Effects of numerical dissipation on finite-volume solutions of compressible flow problems
The effects of numerical dissipation upon solutions to the Euler equations are considered, and results for transonic flows past airfoils are presented to demonstrate the effects of the dissipative terms. The equations are approximated using a finite-volume spatial approximation with added dissipation provided by an adaptive mixture of second and fourth differences. The resulting difference equations are solved using either an explicit multistage Runge-Kutta method or a diagonalized implicit method. It is found that errors in surface values can be introduced by the averaging required to calculate derived quantities of interest.
Caughey, David A.↗
Evaluation and application of a new interferometry technique for compressible flow research
A new method for obtaining large scale interferograms of flow fields in real time was investigated. The method was based on the point diffraction interferometry technique. The method was modified to accommodate the higher laser power required in recording transonic and supersonic flow fields. Basic tests were conducted in unsteady flows and flows about circulation control airfoils at transonic speeds. It was found that vibration was not a significant factor in the application of the system. In the case of the circulation control airfoils, the real-time viewing allowed the identification of the Coanda jet interaction with the external flow and the shedding of large scale vortices. The method proved to be very sensitive to the optical quality of the wind tunnel windows. The results obtained were compared with earlier interferograms obtained using interferometry. These results were in qualitative agreement.
Bachalo, William D.↗
Zonal multigrid solution of compressible flow problems on unstructured and adaptive meshes
The simultaneous use of adaptive meshing techniques with a multigrid strategy for solving the 2-D Euler equations in the context of unstructured meshes is studied. To obtain optimal efficiency, methods capable of computing locally improved solutions without recourse to global recalculations are pursued. A method for locally refining an existing unstructured mesh, without regenerating a new global mesh is employed, and the domain is automatically partitioned into refined and unrefined regions. Two multigrid strategies are developed. In the first, time-stepping is performed on a global fine mesh covering the entire domain, and convergence acceleration is achieved through the use of zonal coarse grid accelerator meshes, which lie under the adaptively refined regions of the global fine mesh. Both schemes are shown to produce similar convergence rates to each other, and also with respect to a previously developed global multigrid algorithm, which performs time-stepping throughout the entire domain, on each mesh level. However, the present schemes exhibit higher computational efficiency due to the smaller number of operations on each level.
Mavriplis, Dimitri J.↗
The unsteady aerodynamics of an oscillating cascade in a compressible flow field
Fundamental experiments were performed in the NASA Lewis Transonic Oscillating Cascade Facility to investigate and quantify the unsteady aerodynamics of a cascade of biconvex airfoils executing torsion-mode oscillations at realistic reduced frequencies. Flush-mounted, high-response miniature pressure transducers were used to measure the unsteady airfoil surface pressures. The pressures were measured for three interblade phase angles at two inlet Mach numbers, 0.65 and 0.80, and two incidence angles, 0 and 7 deg. The time-variant pressures were analyzed by means of discrete Fourier transform techniques, and these unique data were then compared with predictions from a linearized unsteady cascade model. The experimental results indicate that the interblade phase angle had a major effect on the chordwise distributions of the airfoil surface unsteady pressure, and that reduced frequency, incidence angle, and Mach number had a somewhat less significant effect.
Buffum, Daniel H.↗
A mesh regeneration method using quadrilateral and triangular elements for compressible flows
An adaptive remeshing method using both triangular and quadrilateral elements suitable for high-speed viscous flows is presented. For inviscid flows, the method generates completely unstructured meshes. For viscous flows, structured meshes are generated for boundary layers, and unstructured meshes are generated for inviscid flow regions. Examples of inviscid and viscous adaptations for high-speed flows are presented.
Vemaganti, G. R.↗
Vorticity-dilatation boundary conditions for viscous compressible flows
The theoretical generalization, synthesis, and classification of various relevant formulations of the vorticity-dilatation conditioning problem is presented. Kinematic and dynamic conditions as well as differential and integral forms are considered. The possibility of using various variables that relate directly to vorticity and dilatation to construct the desired boundary conditions is examined. Some new formulations are given and previously proposed ones are located properly in the classification, and their interrelations are clarified.
Wu, J. Z.↗
Turbulence modeling for high speed compressible flows
Turbulence models are necessary in numerical simulations because of the impracticality of computing all scales of turbulent motion. Approximate methods, or turbulence models, are introduced to simplify and make the computations practical. There are several approaches to turbulence modeling: subgrid scale modeling; modeling of all the scales of turbulent motion; eddy viscosity; and Reynolds stress turbulence closure models. In many instances, computations based on turbulence models are compared with available experimental data. The effort is directed at seeking models which have reasonable accuracy over a limited range of flow conditions. Future needs are briefly discussed. Work to date is outlined.
Chandra, Suresh↗
Compressible flows with periodic vortical disturbances around lifting airfoils
A numerical method is developed for solving periodic, three-dimensional, vortical flows around lifting airfoils in subsonic flow. The first-order method that is presented fully accounts for the distortion effects of the nonuniform mean flow on the convected upstream vortical disturbances. The unsteady velocity is split into a vortical component which is a known function of the upstream flow conditions and the Lagrangian coordinates of the mean flow, and an irrotational field whose potential satisfies a nonconstant-coefficient, inhomogeneous, convective wave equation. Using an elliptic coordinate transformation, the unsteady boundary value problem is solved in the frequency domain on grids which are determined as a function of the Mach number and reduced frequency. The numerical scheme is validated through extensive comparisons with known solutions to unsteady vortical flow problems. In general, it is seen that the agreement between the numerical and analytical results is very good for reduced frequencies ranging from 0 to 4, and for Mach numbers ranging from .1 to .8. Numerical results are also presented for a wide variety of flow configurations for the purpose of determining the effects of airfoil thickness, angle of attack, camber, and Mach number on the unsteady lift and moment of airfoils subjected to periodic vortical gusts. It is seen that each of these parameters can have a significant effect on the unsteady airfoil response to the incident disturbances, and that the effect depends strongly upon the reduced frequency and the dimensionality of the gust. For a one-dimensional (transverse) or two-dimensional (transverse and longitudinal) gust, the results indicate that airfoil thickness increases the unsteady lift and moment at the low reduced frequencies but decreases it at the high reduced frequencies. The results show that an increase in airfoil Mach number leads to a significant increase in the unsteady lift and moment for the low reduced frequencies, but a significant decrease for the high reduced frequencies.
Scott, James R.↗
The aerodynamics of an oscillating cascade in a compressible flow field
Fundamental experiments are performed in the NASA Lewis Research Center Transonic Oscillating Cascade Facility to investigate and quantify the aerodynamics of a cascade of bioconvex airfoils executing torsion mode oscillations at realistic reduced frequency values. Both steady and unsteady airfoil surface pressures are measured at two inlet Mach numbers, 0.65 and 0.80, and two incidence angles, 0 and 7 deg, with the harmonic torsional airfoil cascade oscillations at realistic high reduced frequency and unsteady data obtained at several interblade phase angle values. The time-variant pressures are analyzed by means of discrete Fourier transform techniques, with these unique data compared with predictions from a linearized unsteady cascade model. The experimental results indicate that the interblade phase angle has a major effect on the chordwise distributions of the airfoil surface unsteady pressure, with the effect of reduced frequency, incidence angle, and Mach numbers somewhat less significant.
Buffum, D. H.↗
Efficient use of direct solvers for the calculation of compressible flows
While the direct solution of systems of linear equations resulting from fluid dynamic problems has generally not been practical in the past, it is presently demonstrated that the direct method is often more efficient than the most popular iterative schemes when constructed in such a way as to take advantage of presently available vector processing capabilities and large memory. The vertical line Gauss-Seidel algorithm was chosen as the iterative method to be compared with the direct method. It is fond that the direct method becomes efficient only when large residual reductions are desired.
Riggins, David W.↗
Computational methods for vortex dominated compressible flows
Explore the source record for details and available documents.
Murman, Earll M.↗
Comment on: The present state and future direction of second-order closure models for compressible flows
The topics are presented in viewgraph form and include: (1) an alternative relaxed strain energy (RSE) model; (2) shear layers/spread rate comparisons; (3) general comments on RSE models; and (4) the law of the wall.
Viegas, J. R.↗