Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Color confinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

An Evolving Trio of Hybrid Stars: C 111

Our goal is to understand the behavior of the outer atmosphere in this intermediate stage to create a comprehensive picture of atmospheric evolution. In the hybrid phase, the large-scale magnetic dynamo activity decays and hydrodynamic processes assume importance. Some hot plasma is still confined close to the star by magnetic loops, yet the confining field is breaking open, the atmosphere can escape through these open field lines, and the diffuse corona may be warm. There may well be a more extended and variable transition process. It remains for FUSE to identify the controlling parameters of the hybrid stars. It shows the positions of our 3 targets in the color-magnitude diagram where it is seen that they are at the extreme end of the hybrid region. Originally we had been awarded the hybrid star Iota Aur, but due to newly imposed pointing constraints of FUSE, that target was not accessible. And so we substituted Iota Dra, a giant of mass similar to our other targets but less evolved. In addition, Iota Dra was recently found to harbor a sub-stellar objects, possibly a planet, and so it could reveal the stellar environment of the planet. This substitution was accepted.

Oliversen, Ronald↗

Constraints on the Magnitude of Vertical and Lateral Mass Transport on the Moon

The role of vertical and lateral mass transport of crustal materials on the observed patterns of lunar surface composition, and the effects on our understanding of the geologic evolution of the planet, have been the subject of much debate in the lunar science community. The primary consensus that emerged from analyses of these processes in the 1970's and 1980's was that vertical and lateral mixing through impact gardening was a relatively inefficient process, and not likely to have contributed significantly to compositional units and variations on the Moon. The supporting evidence for this view is that unit boundaries (e.g. mare-highland contacts, contacts between mare color units) are still apparently quite distinct and sharp despite several aeons of impact activity, and cores from the Apollo landing sites did not show any evidence of widespread homogenization of the surface composition, nor distinct compositional gradients across geologic boundaries. In addition, modeling of vertical and lateral transport generally showed that the effects on composition should be confined to horizontal scales of about a kilometer and vertical scales of a meter. The problem with this consensus is that there is ample contradictory evidence. The fundamental discovery of Wood et al. (1970) was made possible by significant horizontal transport of highland material to the center of Mare Tranquillitatis. The continuous and discontinuous ejecta from the crater Copernicus has clearly influenced the surface composition of a large area of the lunar maria, while rays and ejecta from many highland craters are easily recognized in and around the nearside maria. Despite this contrary evidence, there have been few detailed studies to quantify the amount and rate of material redistribution through impact processes (a notable exception is reported in the paper by Pieters et al, 1985), largely because data adequate to critically analyze this process were lacking. However, the multispectral images acquired by the Galileo and Clementine missions now permit the investigation of this process.

Mustard, John F.↗

Wide-Field Infrared Survey Explorer Observations of Young Stellar Objects in the Lynds 1509 Dark Cloud in Auriga

The Wide-Field Infrared Survey Explorer (WISE) has uncovered a striking cluster of young stellar object (YSO) candidates associated with the L1509 dark cloud in Auriga. The WISE observations, at 3.4, 4.6, 12, and 22 microns, show a number of objects with colors consistent with YSOs, and their spectral energy distributions suggest the presence of circumstellar dust emission, including numerous Class I, flat spectrum, and Class II objects. In general, the YSOs in L1509 are much more tightly clustered than YSOs in other dark clouds in the Taurus-Auriga star forming region, with Class I and flat spectrum objects confined to the densest aggregates, and Class II objects more sparsely distributed. We estimate a most probable distance of 485-700 pc, and possibly as far as the previously estimated distance of 2 kpc.

Infrared↗

Holographic MQCD

We study a brane configuration of D4-branes and NS5-branes in weakly coupled type IIA string theory, which describes in a particular limit d=4 N=1 SU(N+p) supersymmetric QCD with 2N flavors and a quartic superpotential. We describe the geometric realization of the supersymmetric vacuum structure of this gauge theory. We focus on the confining vacua of the gauge theory, whose holographic description is given by the MQCD brane configuration in the near-horizon geometry of N D4-branes. This description, which gives an embedding of MQCD into a field theory decoupled from gravity, is valid for 1<<p<<N, in the limit of large five-dimensional 't Hooft couplings for the color and flavor groups. We analyze various properties of the theory in this limit, such as the spectrum of mesons, the finite temperature behavior, and the quark-antiquark potential. We also discuss the same brane configuration on a circle, where it gives a geometric description of the moduli space of the Klebanov-Strassler cascading theory, and some nonsupersymmetric generalizations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TORSIONAL OSCILLATIONS OF NONBARE STRANGE STARS

Strange stars are one of the possible compact stellar objects that can form after a supernova collapse. We consider a model of a strange star having an inner core in the color-flavor locked phase surmounted by a crystalline color superconducting (CCSC) layer. These two phases constitute the quarksphere, which we assume to be the largest and heaviest part of the strange star. The next layer consists of standard nuclear matter forming an ionic crust, hovering on the top of the quarksphere and prevented from falling by a strong dipolar electric field. The dipolar electric field arises because quark matter is confined in the quarksphere by the strong interaction, but electrons can leak outside forming an electron layer a few hundred fermi thick separating the ionic crust from the underlying quark matter. The ionic matter and the CCSC matter constitute two electromagnetically coupled crust layers. We study the torsional oscillations of these two layers. Remarkably, we find that if a fraction larger than 10{sup −4} of the energy of a Vela-like glitch is conveyed to a torsional oscillation, the ionic crust will likely break. The reason is that the very rigid and heavy CCSC crust layer will absorb only a small fraction of the glitch energy, leading to a large-amplitude torsional oscillation of the ionic crust. The maximum stress generated by the torsional oscillation is located inside the ionic crust and is very close to the star’s surface. This peculiar behavior leads to a much easier crust cracking than in standard neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of window temperature variations on ITER toroidal interferometer and polarimeter (TIP) measurements

Abstract The toroidal interferometer and polarimeter (TIP) is one of the primary electron density diagnostics on ITER. To meet measurement requirements over several thousand seconds, environmental factors such as changes in the window temperature, air temperature, and humidity, which can cause uncompensated phase drifts, must be minimized. This paper reports measurements of the phase shift induced by ZnSe and BaF₂ windows as their temperature is varied utilizing the TIP prototype. To accomplish these measurements, test pieces of BaF₂ and ZnSe are placed in a small oven that is located in one leg of the 10.59/5.22 micron two-color interferometer TIP prototype. The oven temperature was varied from room temperature to ∼90 °C, which is slightly higher than the expected window temperatures on ITER. The vibration compensated phase shifts measured for these two materials are dϕᵥ꜀ /dT/L = 0.0121 and −0.275 deg. /°C/cm −1 for BaF₂ and ZnSe, respectively. From these measurements, it was concluded that temperature variations of the environmental/secondary confinement barrier window and primary vacuum window have to be suppressed within approximately 1°C and 2°C, respectively, in order to passively meet the electron density measurement requirements in ITER.

Akiyama, T (ORCID:0000000198469795)↗

Open giant magnons on LLM geometries

We compute sigma model solutions for rigidly rotating open strings suspended between giant gravitons in general LLM geometries. These solutions are confined to the LLM plane. These all have a dispersion relation for Δ - J that is consistent with saturation of a BPS bound of the centrally extended spin chain. For the special case of circularly symmetric LLM geometries, we can further evaluate the amount of angular momentum J carried by these strings. This quantity diverges for string configurations that try to move between different “coloring regions” in the LLM plane. All of these quantities have a perturbative expansion in the t’Hooft coupling. For the strings suspended between AdS giants, we can compute in field theory the leading result of J carried by the string via an analytic continuation of the SU(2) result, with the help of the Bethe Ansatz for the SL(2) sector. We thus provide additional information on how the radial direction of AdS arises from (open) spin chain calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Review of neutral naturalness

The hierarchy between the mass parameter of the Higgs boson and larger mass scales becomes ever more puzzling as experiments explore higher energies. Neutral naturalness is the umbrella term for symmetry-based explanations for these hierarchies whose quark symmetry partners are not charged under the SU(3) c color gauge group of the Standard Model. Though the first manifestations of this idea predate the physics runs of the Large Hadron Collider, since the Higgs discovery this paradigm has grown and developed to include a wide variety of concrete realizations with connections to intriguing collider signals. Determining the phenomenology of such models often requires the characterization—typically relying on lattice calculations—of a new confining gauge symmetry. This presents additional motivation to further develop our understanding of nonperturbative field theory as well as to pursue specific lattice studies. The wide range of suggested hidden sectors also produces a variety of dark matter candidates, intersections with astrophysics and cosmology, and ties to neutrinos and flavor. In this review, we orient the reader within both this growing collection of specific models and the physical phenomena they produce. We also survey the often less familiar dynamics of hidden-sector glueballs and quirks. In addition to providing a guide to past efforts, we reveal interesting directions for further study.

Batell, Brian [Univ. of Pittsburgh, PA (United Sta↗

DNA Templated Metal Nanoclusters: From Emergent Properties to Unique Applications

Metal nanoclusters containing a few to several hundred atoms with sizes ranging from sub-nanometer to ~2 nm occupy an intermediate size regime that bridges larger plasmonic nanoparticles and smaller metal complexes. With strong quantum confinement, metal nanoclusters exhibit molecule-like properties. This paper focuses on noble metal nanoclusters that are synthesized within a single stranded DNA template. Compared to other ligand protected metal nanoclusters, DNA-templated metal nanoclusters manifest intriguing physical and chemical properties that are heavily influenced by the design of DNA templates. For example, DNA-templated silver nanoclusters can show bright fluorescence, tunable emission colors, and enhanced stability by tuning the sequence of the encapsulating DNA template. DNA-templated gold nanoclusters can also serve as excellent cocatalysts, which are integratable with other biocatalysts such as enzymes. In this Account, DNA-templated silver and gold nanoclusters are selected as paradigm systems to showcase their emergent properties and unique applications. We first discuss the DNA-templated silver nanoclusters with a focus on the creation of a complementary palette of emission colors, which has potential applications for multiplex assays. The importance of the DNA template toward enhanced stability of silver nanoclusters is also demonstrated. We then introduce a special class of activable fluorescence probes that are based on the fluorescence turn-on phenomena of DNA-templated silver nanoclusters, which are named nanocluster beacons (NCBs). NCBs have distinct advantages over molecular beacons for nucleic acid detection, and their emission mechanisms are also discussed in detail. We then discuss a universal method of creating novel DNA–silver nanocluster aptamers for protein detection with high specificity. The remainder of the Account is devoted to the DNA-templated gold nanoclusters. We demonstrate that DNA–gold nanoclusters can serve as enhancers for enzymatic reduction of oxygen, which is one of the most important reactions in biofuel cells. Although DNA-templated metal nanoclusters are still in their infancy, we anticipate they will emerge as a new type of functional nanomaterial with wide applications in biology and energy science. Future research will focus on the synthesis of size selected DNA–metal nanoclusters with atomic monodispersity, structural determination of different sized DNA–metal nanoclusters, and establishment of structure–property correlations. Some long-standing mysteries, such as the origin of fluorescence and mechanism for emission color tunability, constitute the central questions regarding the photophysical properties of DNA–metal nanoclusters. On the application side, more studies are required to understand the interaction between nanocluster and biological systems. In the foreseeable future, one can expect that new biosensors, catalysts, and functional devices will be invented based on the intriguing properties of well-designed DNA–metal nanoclusters and their composites. Altogether, DNA–metal nanoclusters can add additional spotlights into the highly vibrant field of ligand protected, quantum sized metal nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stellar populations in local group dwarf elliptical galaxies. II - NGC 205

NGC 205, a dwarf elliptical companion of M31, was studied using deep CCD photometry on the VRI system. Consideration is given to a comparison between the giant branch and the Galactic globular clusters, the degree of chemical enrichment in the outer parts of NGC 204, and the setting of constraints on the stellar population of NGC 205. Should the distance of the galaxy be that of M31, this field's stellar population is extremely old. If star formation in NGC 205 is a recurring phenomenon, it is confined to the interior of the galaxy. Should the stellar population of NGC 205 be as old as Galactic globular clusters, its distance modulus is 24.3 + or - 0.2. The giant branch location corresponds to a mean metallicity greater than or equal to -0.9 + or - 0.2, and a metallicity dispersion is determined to be sigma greater than or equal to 0.5 dex. Also noted is that the color distribution at a given luminosity appears to be positively skewed.

Mould, J.↗

Frequency Conversion in a Time-Variant Dielectric Metasurface

The color of light is a fundamental property of electromagnetic radiation; as such, control of the frequency is a cornerstone of modern optics. Nonlinear materials are typically used to generate new frequencies, however the use of time-variant systems provides an alternative approach. Utilizing a metasurface that supports a high-quality factor resonance, we demonstrate that a rapidly shifting refractive index will induce frequency conversion of light that is confined in the nanoresonator meta-atoms. We experimentally observe this frequency conversion and develop a time-dependent coupled mode theory model that well describes the system. Finally, the intersection of high quality-factor resonances, active materials, and ultrafast transient spectroscopy leads to the demonstration of metasurfaces operating in a time-variant regime that enables enhanced control over light–matter interaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spectral and small-signal electroluminescence analysis of carrier dynamics in dual-color InGaN/GaN light-emitting diodes

Here, we study carrier transport, distribution, and recombination in dual-color c-plane InGaN/GaN LEDs using spectral analysis and small-signal electroluminescence (SSEL). The emissions from green and blue quantum wells (QWs) were experimentally separated and analyzed. Spectral analysis and SSEL independently demonstrate that emission from the green QW is dominant at low current densities, consistent with its narrower bandgap, while emission from the blue QW is more significant at higher current densities, consistent with its reduced quantum confined Stark effect and larger wavefunction overlap. In addition, we demonstrate that the carrier recombination in the QWs is non-uniform, with carrier transport dramatically affecting the carrier distribution between QWs and the recombination in a specific QW. Finally, our measurements suggest that the effective active region contributing most strongly to radiative recombination corresponds to approximately two to three QWs on the p-GaN side, indicating limited carrier transport to more distant QWs in the structures studied.

36 MATERIALS SCIENCE↗

Galactic Structure in the Outer Disk: The Field in the Line of Sight to the Intermediate-Age open Cluster Tombaugh 1

We employ optical photometry and high-resolution spectroscopy to study a field toward the open cluster Tombaugh 1, where we identify a complex population mixture that we describe in terms of young and old Galactic thin disks. Of particular interest is the spatial distribution of the young population, which consists of dwarfs with spectral types as early as B6 and is distributed in a blue plume feature in the color–magnitude diagram. For the first time, we confirm spectroscopically that most of these stars are early-type stars and not blue stragglers or halo/thick-disk subdwarfs. Moreover, they are not evenly distributed along the line of sight but crowd at heliocentric distances between 6.6 and 8.2 kpc. We compare these results with present-day understanding of the spiral structure of the Galaxy and suggest that they trace the outer arm. This range of distances challenges current Galactic models adopting a disk cutoff at 14 kpc from the Galactic center. The young dwarfs overlap in space with an older component, which is identified as an old Galactic thin disk. Both young and old populations are confined in space since the disk is warped at the latitude and longitude of Tombaugh 1. The main effects of the warp are that the line of sight intersects the disk and entirely crosses it at the outer arm distance and that there are no traces of the closer Perseus arm, which would then be either unimportant in this sector or located much closer to the formal Galactic plane. Finally, we analyze a group of giant stars, which turn out to be located at very different distances and to possess very different chemical properties, with no obvious relation to the other populations.

79 ASTRONOMY AND ASTROPHYSICS↗

Mass and Momentum Turbulent Transport Experiments with Confined Coaxial Jets

Downstream mixing of coaxial jets discharging in an expanded duct was studied to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the propulsion community for combustor flow modeling. Flow visualization studies showed four major shear regions occurring; a wake region immediately downstream of the inlet jet inlet duct; a shear region further downstream between the inner and annular jets; a recirculation zone; and a reattachment zone. A combination of turbulent momentum transport rate and two velocity component data were obtained from simultaneous measurements with a two color laser velocimeter (LV) system. Axial, radial and azimuthal velocities and turbulent momentum transport rate measurements in the r-z and r-theta planes were used to determine the mean value, second central moment (or rms fluctuation from mean), skewness and kurtosis for each data set probability density function (p.d.f.). A combination of turbulent mass transport rate, concentration and velocity data were obtained system. Velocity and mass transport in all three directions as well as concentration distributions were used to obtain the mean, second central moments, skewness and kurtosis for each p.d.f. These LV/LIF measurements also exposed the existence of a large region of countergradient turbulent axial mass transport in the region where the annular jet fluid was accelerating the inner jet fluid.

Johnson, B. V.↗

On interpretation of fluctuations of conserved charges at high T

Abstract Fluctuations of conserved charges calculated on the lattice which can be measured experimentally, are well reproduced by a hadron resonanse gas model at temperatures below$$T_{ch} \sim 155$$ T ch ∼ 155 MeV and radically deviate from the hadron resonance gas predictions above the chiral restoration crossover. This behaviour is typically interpreted as an indication of deconfinement in the quark-gluon plasma regime. We present an argument that this interpretation may be too simple. The argument is based on the scaling of quantities with the number of colors: demonstration of deconfinement and QGP requires observable that is sensitive to$$\sim N_c^2$$ ∼ N c 2 gluons while the conserved charges are sensitive only to quarks and above$$T_{ch}$$ T ch scale as$$N_c^1$$ N c 1 . The latter scaling is consistent with the existence of an intermediate regime characterized by restored chiral symmetry and by approximate chiral spin symmetry which is a symmetry of confining interaction. In this regime the energy density, pressure and entropy density scale as$$N_c^1$$ N c 1 . In the large$$N_c$$ N c limit this regime might become a distinct phase separated from the hadron gas and from QGP by phase transitions. A natural observable that associates with deconfinement and is directly sensitive to deconfined$$N_c^2-1$$ N c 2 - 1 gluons is the Polyakov loop; in the$$N_c=3$$ N c = 3 world it remains very close to 0 at temperatures well above chiral crossover, reaches the value$$\sim 0.5$$ ∼ 0.5 around$$\sim 3T_{ch}$$ ∼ 3 T ch and the value close to 1 at temperatures$$\sim 1$$ ∼ 1 GeV.

Physics↗

Demystification of Processes that Effect Prioritization of Space Radiation Element Research

In an effort to demystify how research funding priorities are established , the Space Radiation Element will present an introduction to the Human Space Risk Board (HSRB) framework that is that used to inform Human System Risk and can be found at https://humanresearchroadmap.nasa.gov/Risks/. These risks are based on the consequences of hazards (space radiation, altered gravity, isolation & confinement, distance from earth and hostile/closed environment) a human body is exposed to during spaceflight. The HSRB regularly evaluates risks to humans in space which includes updating the knowledge base to reflect emerging research, the development of effective countermeasures, and evolving operational approaches toward addressing those risks. To increase understanding and clarity, this talk will step through how risks (with the focus on Risk of Radiation Carcinogenesis) are assigned a rating (and color code) based on design reference missions, likelihood, and consequence. Further, The Space Radiation Element will discuss how risks, including the magnitude/rating, required technical deliverables, and expected products from current research efforts affect our element strategy and prioritization of research. In addition, navigation of the publicly available www.nasa.gov/hrp, will be demonstrated to inform principal investigators where this information can be readily accessed. Our primary objectives for this presentation/demonstration are to demystify The Space Radiation Element’s internal processes and to educate researchers concerning publicly available documents that can be used to better align their proposed objectives with Element priorities.

J A Zawaski↗

Iodine Close Packing in Hybrid Halide Bismuth(III) and Antimony(III) Semiconductors: (NH 3 (CH 2 ) 7 NH 3 ) 2 Bi 2 I 10 and (NH 3 (CH 2 ) 7 NH 3 ) 2 Sb 2 I 10

Simple features in complex hybrid inorganic–organic crystalline materials provide opportunities for targeted discovery of materials with desired optoelectronic properties. In this study, we report the structure and optoelectronic properties of isostructural (NH 3 (CH 2 ) 7 NH 3 ) 2 Bi 2 I 10 and (NH 3 (CH 2 ) 7 NH 3 ) 2 Sb 2 I 10 . The crystal structures are characterized by corner-connected metal-iodide octahedral chains that form a cubic close-packed iodine inorganic framework. Variable temperature UV–visible diffuse reflectance spectroscopy reveals stark contrasts in the onset of absorption and color changes between the [MX6]3– based structures, due to differences in the interaction of the (NH 3 (CH 2 ) 7 NH 3 ) 2+ organic ammonium cation and the iodine packing of the inorganic framework. Density functional theory (DFT) calculations reveal flat bands reflective of the pseudo-1D crystal structure. Dark microwave conductivity (DMC) and time-resolved microwave conductivity (TRMC) reveal an excitonic character with long carrier lifetimes, consistent with the electronically confined octahedral chains. Comparison of the structural features with those of other diammonium-containing crystals reveals that diammoniumheptane can substitute into structures, displacing inorganic octahedra while retaining a close-packed anion framework. This provides a means for targeting new hybrid materials in which “vacancy-ordering” provides a crystal chemical approach for targeting desirable optoelectronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Characterization of Impacts of Coupled Geomechanics and Flow on Safe and Permanent Geological Storage of CO 2 in Fractured Aquifers

This is the final scientific report for the award DE-FE0023305, entitled “Quantitative Characterization of Impacts of Coupled Geomechanics and Flow on Safe and Permanent Geological Storage of CO 2 in Fractured Aquifers.” The work has been divided into six tasks. In Task 2, we characterized rock properties, which are important when developing a quantitative approach for understanding and predicting geomechanical effects on large-scale CO 2 injection and long-term storage in the subsurface. Rock properties of interest for this characterization include porosity, permeability, elastic constants, strength, and heat capacity. We measured rock properties for three different rock types: concrete, sandstone and shale. These properties were obtained from the acoustic measurement, permeability and porosity measurement, Brazilian test, the uniaxial compressive test, and heat capacity measurement. Then, using the Brazilian technique to fracture samples, we measured their permeability under brine injection for varying effective stresses, followed by similar measurements of permeability under sc-CO 2 injection. Permeability to brine and sc-CO 2 decreased as the effective stress increased. The apparent permeability to sc-CO 2 was an order of magnitude less than that for brine, a consequence of CO 2 being the non-wetting fluid. In Task 3, we developed understandings and correlations for CO 2 injection pressure induced fracturing. We initially fractured four eight inch cubes of concrete with brine to establish a standard test procedure. Then, additional concrete samples were fractured using brine. Confining stresses were exerted on the samples and brine was injected at a constant rate into a borehole that was previously drilled into the concrete cube. The borehole pressure was measured and fracture initiation was identified as a peak in the pressure profile. That was followed by fracture propagation, which was identified as a plateau in the pressure profile, and finally the fracture reached the sample surface. The sample surfaces were photographed before and after fracturing, which enabled determination of where the fracture reached the sample surface. Afterwards, aqueous food dye solution was injected into the fractured concrete samples to color the fracture planes. The borehole was filled with food dye solution in advance, a gas pulse was transmitted to the borehole, and the borehole was then shut in to allow the food dye to be driven into existing fractures. Then, the concrete samples were broken down by high-pressure gas injection to reveal the geometry and morphology of the hydraulic fractures. In addition, acoustic measurements were conducted on multiple locations on each face of the concrete samples before and after injection for comparison. This comparison was used to confirm changes in the internal structure of the concrete sample, namely the formation of fractures. There were six concrete samples fractured with brine. Afterwards, concrete samples were fracture using sc-CO 2 . The main change in experimental procedure was the inclusion of temperature control, since in the field, we mostly encounter temperature and pressure conditions above the supercritical point of CO 2 . The concrete samples were pre-heated in an oven to elevate their temperature, and thermal tape was used to heat the CO 2 to a temperature above its supercritical temperature. Two concrete samples were fractured using liquid CO 2 , four concrete samples were fractured using gaseous CO 2 , and twenty two concrete samples were fractured using sc-CO 2 . For the concrete samples fractured using sc-CO 2 , three had pre-existing hydraulic fractures on the surface near the wellbore, and two were water saturated (as opposed to containing only air). Two concrete samples were composite samples, with a high permeability ball in the center, in order to represent CO 2 injection into a high permeability zone surrounded by a low permeability sealing formation. Later, we fractured five shale samples, obtained from the Niobrara shale outcrop, with sc-CO 2 . The injection rate was constant, confining stresses were applied, the shale samples were pre-heated in an oven to the desired temperature, and the sample was then fractured. An analysis of the failure type was done for many of the concrete samples, based on the predicted break down pressure for tensile and shear failure, and it was found that most samples fractured due to shear failure. Also, the presence of induced fractures has little to no effect on the fracture initiation pressure, but significantly changes the fracture morphology. The CO 2 fracturing in water saturated samples behaved much similar to brine induced fracturing. There was a significant difference of breakdown pressure for injection of CO 2 and brine, where the breakdown pressure for CO 2 induced fracturing is generally around the minimum horizontal stress and that for brine is much higher. Finally, the fracture orientation for most samples with large confining stress differential was perpendicular to the minimum horizontal stress. When the stress differential, especially the difference between the two directions with the smallest stresses was small, the fracture orientation was determined not only by the minimum stress direction, but also the magnitude of the confining stress, the tensile strength of the rock, and the breakdown pressure. In Task 4, we modified our coupled flow-geomechanical models to model fracture growth and propagation in storage formations and caprocks. These flow-geomechanical models are TOUGH2-CSM and TOUGH2-FLAC. The TOUGH2-CSM fluid and heat flow formulation is based on the TOUGH2 formulation of mass and energy conservation equations that govern fluid and heat flow in general multiphase, multicomponent, multi-porosity systems. The TOUGH2-CSM simplified geomechanical formulation is based on the linear theory of elasticity applied to multi-porosity non-isothermal (thermo-multi-poroelastic) media. We previously derived, from the fundamental relations of the linear theory of elasticity, an equation relating mean stress, pore pressures, temperatures, and body force (the Mean Stress equation) that we added to the TOUGH2-CSM fluid and heat flow equations. We extended the TOUGH2-CSM simplified geomechanical formulation to calculate the entire stress tensor by deriving equations for stress tensor components from derivatives of the Cartesian thermo-multi-poroelastic Navier equation components. In addition, we derived equations for stress tensor components in rz-coordinates. We solved these geomechanical equations using the integral finite difference method. This method utilizes momentum fluxes obtained by “factoring” a divergence operator out of each geomechanical equation. In Task 5, we did a literature survey to determine suitable correlations for fracture initiation, growth, and propagation. After surveying numerous papers, we modified TOUGH2-CSM to model stress dependent fracture initiation and growth using the Mohr-Coulomb criterion for shear failure in faults and caprock and the condition of negative minimum effective stress for tensile failure. Tensile failure results in a fracture whose width depends on the difference between fracture pressure and minimum stress and whose propagation is based on the difference between the stress intensity factor at the fracture tip and the rock toughness. The TOUGH-FLAC model is based on the FLAC3D ubiquitous joint model, extended for the modeling of permeability changes induced by changes in effective normal stress across fractures as well permeability changes caused by shearing along fractures. In Task 6, we validated our coupled flow-geomechanical models using analytical solutions and problems from the literature. We validated the TOUGH2-CSM modifications using analytical solutions to the displacement from a uniform load on a semi-infinite elastic medium and the two-dimensional Mandel-Cryer effect. Those were followed by a sample problem to test our stress tensor calculations, which was for injection into a single-phase reservoir with constant properties. Comparisons of our simulator to published results were done on for the depletion of a single-phase reservoir with stress dependent porosity, two examples from the In Salah gas project, an axisymmetric baserock–reservoir–caprock system with a normal faulting stress regime that had thermally induced shear stresses, simulations of CO 2 leakage through caprock in a two-dimensional reservoir in Cartesian coordinates, and predictions of caprock failure from CO 2 injection into an axisymmetric reservoir. Finally, we simulated CO 2 injection pressure-induced fracturing from one of our laboratory studies, Sample 39, and obtained a fracture profile. We also validated the TOUGH2-FLAC model for fluid driven fracture growth against solutions based on the KGD model and a case with an inclined fracture that was loaded from the boundaries to achieve wing-crack propagation. The strain softening tensile behavior and softening of modulus considering a simple damage approach was verified by a simulation representing hydraulic fracturing stress measurement around a vertical well. Finally, the model was validated against deep fracture zone opening and surface uplift at In Salah with inverses analysis used to improve the match of simulation with field data. In Task 7, we developed a scheme based on inverse modeling that can be used to identify caprock leakage. Injection of fluid into a reservoir results in a time varying pressure profile that depends on the properties of the rock and the fluid. The presence of significant caprock leakage would effect this pressure profile and we used inverse modeling, namely the Levenberg-Marquardt method, to determine the leakage location from the pressure profile. A two-dimensional and a three-dimensional example based on published data were presented. The published simulation was run and its results were considered as “field” data. In the two-dimensional example, a simulation of CO 2 injection into a two-dimensional aquifer-caprock system, the caprock had a vertical fault through which leakage could occur. The location of this leakage was obtained from our inverse modeling scheme. In the three-dimensional example, the simulation domain had four geological layers, one of which was the injection zone that contained a horizontal injection well. We simulated fractures as high permeability gridblocks, introduced a fracture that spanned the caprock depth, and ran a simulation to obtain “field” data. Then, using our inverse modeling scheme, we obtained the location of that fracture.

58 GEOSCIENCES↗