Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Toward Realistic Simulation of low-Level Clouds Using a Multiscale Modeling Framework With a Third-Order Turbulence Closure in its Cloud-Resolving Model Component

This study presents preliminary results from a multiscale modeling framework (MMF) with an advanced third-order turbulence closure in its cloud-resolving model (CRM) component. In the original MMF, the Community Atmosphere Model (CAM3.5) is used as the host general circulation model (GCM), and the System for Atmospheric Modeling with a first-order turbulence closure is used as the CRM for representing cloud processes in each grid box of the GCM. The results of annual and seasonal means and diurnal variability are compared between the modified and original MMFs and the CAM3.5. The global distributions of low-level cloud amounts and precipitation and the amounts of low-level clouds in the subtropics and middle-level clouds in mid-latitude storm track regions in the modified MMF show substantial improvement relative to the original MMF when both are compared to observations. Some improvements can also be seen in the diurnal variability of precipitation.

Xu, Kuan-Man↗
NASA NTRS1994

Four years of global cirrus cloud statistics using HIRS

Trends in global upper-tropospheric transmissive cirrus cloud cover are beginning to emerge from a four-year cloud climatology using NOAA polar-orbiting High-Resolution Infrared Radiation Sounder (HIRS) multispectral data. Cloud occurrence, height, and effective emissivity are determined with the CO2 slicing technique on the four years of data (June 1989-May 1993). There is a global preponderance of transmissive high clouds, 42% on the average; about three-fourths of these are above 500 hPa and presumed to be cirrus. In the Inter-tropical Convergence Zone (ITCZ), a high frequency of cirrus (greater than 50%) is found at all times; a modest seasonal movement tracks the sun. Large seasonal changes in cloud cover occur over the oceans in the storm belts at midlatitudes; the concentrations of these clouds migrate north and south with the seasons following the progressions of the subtropical highs (anticyclones). More cirrus is found in the summer than in the winter in each hemisphere. A significant change in cirrus cloud cover occurs in 1991, the third year of the study. Cirrus observations increase from 35% to 43% of the data, a change of eight percentage points. Other cloud forms, opaque to terrestrial radiation, decerase by nearly the same amount. Most of the increase is thinner cirrus with infrared optical depths below 0.7. The increase in cirrus happens at the same time as the 1991-92 El Nino/Southern Oscillation (ENSO) and the eruption of Mt. Pinatubo. The cirrus changes occur at the start of the ENSO and persist into 1993 in contrast to other climatic indicators that return to near pre-ENSO and volcanic levels in 1993.

Wylie, Donald P.↗
NASA NTRS2011

Detecting Abnormal Machine Characteristics in Cloud Infrastructures

In the cloud computing environment resources are accessed as services rather than as a product. Monitoring this system for performance is crucial because of typical pay-peruse packages bought by the users for their jobs. With the huge number of machines currently in the cloud system, it is often extremely difficult for system administrators to keep track of all machines using distributed monitoring programs such as Ganglia1 which lacks system health assessment and summarization capabilities. To overcome this problem, we propose a technique for automated anomaly detection using machine performance data in the cloud. Our algorithm is entirely distributed and runs locally on each computing machine on the cloud in order to rank the machines in order of their anomalous behavior for given jobs. There is no need to centralize any of the performance data for the analysis and at the end of the analysis, our algorithm generates error reports, thereby allowing the system administrators to take corrective actions. Experiments performed on real data sets collected for different jobs validate the fact that our algorithm has a low overhead for tracking anomalous machines in a cloud infrastructure.

Bhaduri, Kanishka↗
NASA NTRS2016

MABEL Photon-Counting Laser Altimetry Data in Alaska for ICESat-2 Simulations and Development

Multiple Altimeter Beam Experimental Lidar (MABEL) maps Alaskan crevasses in detail, using 50 of the expected along-track Advanced Topographic Laser Altimeter System (ATLAS) signal-photon densities over summer ice sheets. Ice, Cloud, and Land Elevation Satellite 2 (ICESat-2) along-track data density, and spatial data density due to the multiple-beam strategy, will provide a new dataset to mid-latitude alpine glacier researchers.

Landsat-8↗
NASA NTRS2002

Ice Cloud Formation and Dehydration in the Tropical Tropopause Layer

Stratospheric water vapor is important not only for its greenhouse forcing, but also because it plays a significant role in stratospheric chemistry. Several recent studies have focused on the potential for dehydration due to ice cloud formation in air rising slowly through the tropical tropopause layer (TTL). Holton and Gettelman showed that temperature variations associated with horizontal transport of air in the TTL can drive ice cloud formation and dehydration, and Gettelman et al. recently examined the cloud formation and dehydration along kinematic trajectories using simple assumptions about the cloud properties. In this study, a Lagrangian, one-dimensional cloud model has been used to further investigate cloud formation and dehydration as air is transported horizontally and vertically through the TTL. Time-height curtains of temperature are extracted from meteorological analyses. The model tracks the growth, advection, and sedimentation of individual cloud particles. The regional distribution of clouds simulated in the model is comparable to the subvisible cirrus distribution indicated by SAGE II. The simulated cloud properties and cloud frequencies depend strongly on the assumed supersaturation threshold for ice nucleation. The clouds typically do not dehydrate the air along trajectories down to the temperature minimum saturation mixing ratio. Rather the water vapor mixing ratio crossing the tropopause along trajectories is 10-50% larger than the saturation mixing ratio. I will also discuss the impacts of Kelvin waves and gravity waves on cloud properties and dehydration efficiency. These simulations can be used to determine whether observed lower stratospheric water vapor mixing ratios can be explained by dehydration associated with in situ TTL cloud formation alone.

Jensen, Eric↗
NASA NTRS1988

Lidar observations of the fine-scale variability of marine stratocumulus clouds

An Nd:YAG lidar system was flown aboard NASA's ER-2 high altitude aircraft. Observations of cloud top height were made with 70 m along-track and 7.5 m vertical-height resolution. The lidar data observed from an East Pacific stratocumulus cloud height deck revealed large cloud variability on 1-5 km scales. The cloud deck sloped upward from 700 to 1000 m in a northeast-southwest direction over a distance of 120 km. Vertical cloud top distributions were negatively skewed indicating flat-topped clouds. The dominant spectral peak of the cloud top variations was found at 4.5 km, which is 5 to 7 times the depth of the local boundary layer. No other peaks were significant in the average spectrum. The cloud layer was stable with respect to cloud top entrainment instability. The southwestern region of the study area was more prone to shear instability at cloud top than the northeastern region. The results of this study show that a lidar system is ideal to provide the topography of clouds and local boundary layer depth. This information is useful in the study of cloud top radiation and parameterization of clouds in numerical models.

Boers, Reinout↗
NASA NTRS2019

Tracking Aerosol Convective Interactions Experiment (TRACER) Science Plan

Convective clouds play an important role in the Earth's climate system as a driver of large-scale circulations and a primary mechanism for the transport of heat, moisture, aerosols, and momentum throughout the troposphere. Despite their climatic importance, multi-scale models continue to have persistent biases produced by insufficient representation of convective clouds. This is the result of an incomplete understanding of key processes such as convective initiation, updraft and downdraft dynamics, cloud and precipitation microphysics, and aerosol-convection interactions.The Aerosol-Cloud-Precipitation-Climate Initiative, an international research group dedicated to advancing understanding of aerosol impacts on clouds relevant to climate, has identified the Houston, Texas region as an optimal location for targeted studies of aerosol-convection interactions within frequently developing isolated deep convection. Houston lies within a humid subtropical climate regime, where onshore flow and sea-breeze convection interact with a range of aerosol conditions associated with Houston's urban and industrial emissions. Pilot studies have suggested that convective clouds in this region are potentially significantly impacted by the varying aerosol conditions.

Jensen, M.↗
DOE OSTI2025

Detectable ship tracks account for just 5% of aerosol indirect forcing from ship emissions

Ship emissions are a major source of aerosols over oceans, affecting both air quality and energy balance of the climate. However, estimates of their climate forcing diverge between studies relying on visible ship-tracks and those based on models. Here we show that forcing due to visible ship-tracks accounts for just 5% of the total forcing over the southeast Atlantic shipping-lane. Most forcing from ship emissions comes from aerosols that do not form detectable ship-tracks. They are only tips of the iceberg. We make three forcing calculations, one bottom-up based on visible ship-tracks, one top-down based on spatial relationships, and a hybrid approach that combines top-down or model estimated cloud droplet number concentration changes and cloud adjustments. Although the forcing based on machine learning detected ship tracks is an order of magnitude greater than prior results using manually detected ship-tracks, it remains only 5% of that inferred by top-down or cloud adjustment based methods for pre-2020 shipping. The top-down and the combined cloud adjustments methods show similar forcing for the post-2020 reduction in ships’ sulfur emission, although the methods have important regional differences in cloud adjustments that need further investigation. Our results reconcile a long-standing discrepancy in the literature and have important implications for aerosol indirect forcing and marine cloud brightening.

Yuan, Tianle [NASA Goddard Space Flight Center (GS↗
NASA NTRS2010

Direct Observations of PMC Local Time Variations by Aura OMI

The Ozone Monitoring Instrument (OMI) on the Aura satellite obtains unique measurements for polar mesospheric cloud (PMC) analysis. Its wide cross-track viewing swath and high along-track spatial resolution makes it possible to directly evaluate PMC occurrence frequency and brightness variations between 6S" and 8S' latitude as a function of local time over a 12-14 h continuous period. OMI PMC local time variations are closely coupled to concurrent variations in measurement scattering angle, so that ice phase function effects must be considered when interpreting the observations. Two different phase functions corresponding to bright and faint clouds are examined in this analysis. OMI observations show maximum frequency and albedo values at 8-10 h local time in the Northern Hemisphere, with decreasing amplitude at higher latitudes. Southern Hemisphere values reach a minimum at 18-20 h LT. Larger variations are seen in Northern Hemisphere data. No statistically significant longitudinal dependence was seen.

DeLand, Matthew T.↗
NASA NTRS2009

Elevation Change of Drangajokull, Iceland, from Cloud-Cleared ICESat Repeat Profiles and GPS Ground-Survey Data

Located on the Vestfirdir Northwest Fjords), DrangaJokull is the northernmost ice map in Iceland. Currently, the ice cap exceeds 900 m in elevation and covered an area of approx.l46 sq km in August 2004. It was about 204 sq km in area during 1913-1914 and so has lost mass during the 20th century. Drangajokull's size and accessibility for GPS surveys as well as the availability of repeat satellite altimetry profiles since late 2003 make it a good subject for change-detection analysis. The ice cap was surveyed by four GPS-equipped snowmobiles on 19-20 April 2005 and has been profiled in two places by Ice, Cloud. and land Elevation Satellite (ICESat) 'repeat tracks,' fifteen times from late to early 2009. In addition, traditional mass-balance measurements have been taken seasonally at a number of locations across the ice cap and they show positive net mass balances in 2004/2005 through 2006/2007. Mean elevation differences between the temporally-closest ICESat profiles and the GPS-derived digital-elevation model (DEM)(ICESat - DEM) are about 1.1 m but have standard deviations of 3 to 4 m. Differencing all ICESat repeats from the DEM shows that the overall elevation difference trend since 2003 is negative with losses of as much as 1.5 m/a from same season to same season (and similar elevation) data subsets. However, the mass balance assessments by traditional stake re-measurement methods suggest that the elevation changes where ICESat tracks 0046 and 0307 cross Drangajokull are not representative of the whole ice cap. Specifically, the area has experienced positive mass balance years during the time frame when ICESat data indicates substantial losses. This analysis suggests that ICESat-derived elevations may be used for multi-year change detection relative to other data but suggests that large uncertainties remain. These uncertainties may be due to geolocation uncertainty on steep slopes and continuing cloud cover that limits temporal and spatial coverage across the area.

Shuman, Christopher A.↗
DOE OSTI2024

tobac v1.5: introducing fast 3D tracking, splits and mergers, and other enhancements for identifying and analysing meteorological phenomena

There is a continuously increasing need for reliable feature detection and tracking tools based on objective analysis principles for use with meteorological data. Many tools have been developed over the previous 2 decades that attempt to address this need but most have limitations on the type of data they can be used with, feature computational and/or memory expenses that make them unwieldy with larger datasets, or require some form of data reduction prior to use that limits the tool's utility. The Tracking and Object-Based Analysis of Clouds (tobac) Python package is a modular, open-source tool that improves on the overall generality and utility of past tools. A number of scientific improvements (three spatial dimensions, splits and mergers of features, an internal spectral filtering tool) and procedural enhancements (increased computational efficiency, internal regridding of data, and treatments for periodic boundary conditions) have been included in tobac as a part of the tobac v1.5 update. These improvements have made tobac one of the most robust, powerful, and flexible identification and tracking tools in our field to date and expand its potential use in other fields. Future plans for tobac v2 are also discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Lagrangian Study of Interfaces at the Edges of Cumulus Clouds

Abstract Interfaces at the edge of an idealized, nonprecipitating, warm cloud are studied using direct numerical simulation (DNS) complemented with a Lagrangian particle tracking routine. Once a shell has formed, four zones can be distinguished: the cloud core, visible shell, invisible shell, and the environment. The union of the visible and invisible regions is the shell commonly referred to in literature. The boundary between the invisible shell and the environment is the turbulent–nonturbulent interface (TNTI), which is typically not considered in cloud studies. Three million particles were seeded homogeneously across the domain and properties were recorded along individual trajectories. The results demonstrate that the traditional cloud boundary (separating cloudy and noncloudy regions using thresholds applied on liquid condensate or updraft velocity) are some distance away from the TNTI. Furthermore, there is no dynamic difference between the traditional liquid-condensate boundary and the region extending to the TNTI. However, particles crossing the TNTI exhibit a sharp jump in enstrophy and a smooth increase in buoyancy. The traditional cloud boundary coincides with the location of minimum buoyancy in the shell. The shell premixes the entraining and detraining air and analysis reveals a highly skewed picture of entrainment and detrainment at the traditional cloud boundary. A preferential entrainment of particles with velocity and specific humidity higher than the mean values in the shell is observed. Large-eddy simulation of a more realistic setup detects an interface with similar properties using the same thresholds as in the DNS, indicating that the DNS results extrapolate beyond their idealized conditions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

Improving Total Column Ozone Retrievals by Using Cloud Pressures Derived from Raman Scattering in the UV

The higher spectral resolution, coverage, and sampling of the Aura satellite ozone monitoring instrument (OMI), as compared with the total ozone mapping spectrometer (TOMS) should allow for improved ozone retrievals, including estimates of tropospheric ozone. By default, the TOMS-like OMI total column ozone algorithm uses climatological cloud-top pressures based on infrared (IR) measurements to estimate the column ozone below the clouds. Alternatively, cloud pressure can be retrieved using atmospheric rotational Raman scattering with OMI. The retrieved cloud pressures should be more consistent with assumptions made in the total ozone algorithm. Here, we use data from the global ozone monitoring experiment (GOME) to estimate total ozone using both the IR-climatological and retrieved cloud pressures. The exceed approximately 15 DU. Use of the UV cloud pressure retrievals leads to a smoother distribution of ozone along a satellite track by reducing small spatial irregularities presumably caused by errors in the climatological cloud pressures.

Vasilkov, A.↗
NASA NTRS2004

Cloud and Aerosol Measurements from the GLAS Polar Orbiting Lidar: First Year Results

The Geoscience Laser Altimeter System (GLAS) launched in 2003 is the first polar orbiting satellite lidar. The instrument was designed for high performance observations of the distribution and optical scattering cross sections of clouds and aerosol. GLAS is approaching six months of on orbit data operation. These data from thousands of orbits illustrate the ability of space lidar to accurately and dramatically measure the height distribution of global cloud and aerosol to an unprecedented degree. There were many intended science applications of the GLAS data and significant results have already been realized. One application is the accurate height distribution and coverage of global cloud cover with one goal of defining the limitation and inaccuracies of passive retrievals. Comparison to MODIS cloud retrievals shows notable discrepancies. Initial comparisons to NOAA 14&15 satellite cloud retrievals show basic similarity in overall cloud coverage, but important differences in height distribution. Because of the especially poor performance of passive cloud retrievals in polar regions, and partly because of high orbit track densities, the GLAS measurements are by far the most accurate measurement of Arctic and Antarctica cloud cover from space to date. Global aerosol height profiling is a fundamentally new measurement from space with multiple applications. A most important aerosol application is providing input to global aerosol generation and transport models. Another is improved measurement of aerosol optical depth. Oceanic surface energy flux derivation from PBL and LCL height measurements is another application of GLAS data that is being pursued. A special area of work for GLAS data is the correction and application of multiple scattering effects. Stretching of surface return pulses in excess of 40 m from cloud propagation effects and other interesting multiple scattering phenomena have been observed. As an EOS project instrument, GLAS data products are openly available to the science community. First year results from GLAS are summarized.

Spinhirne, J. D.↗
NASA NTRS2010

Analysis of Ice Plains of Filchner/Ronne Ice Shelf Using ICESat Data

We use repeat-track laser altimeter data from the Ice, Cloud, and land Elevation Satellite (ICESat) to map the grounding zone of Filchner/Ronne Ice Shelf (FRIS), Antarctica. Repeated passes of ICESat reveal ice flexure in the grounding zone occurs as the ice shelf responds to ocean height changes due primarily to tides. In the course of our mapping, we have confirmed or identified three major "ice plains", regions of low surface slope near the GZ where the ice is close to hydrostatic equilibrium: one on Institute Ice Stream, another to its east, and another west of Foundation Ice Stream. The vertical information from repeated ICESat tracks enables us to study the topography and flexure characteristics across these three ice plains, and we use this to develop a classification scheme for ice plains based on their surface topography and their state of flotation. We show that one of these ice plains indicates changes in lateral extent on short time-scales, depending on the state of the ocean tide. Understanding the location and nature of ice plains is important for ice sheet modeling, since they add uncertainty to the absolute boundary between floating and grounded ice.

Brunt, Kelly M.↗
NASA NTRS2008

Ground-Based Lidar Measurements During the CALIPSO and Twilight Zone (CATZ) Campaign

The CALIPSO and Twilight Zone (CATZ) field campaign was carried out between June 26th and August 29th of 2007 in the multi-state Maryland-Virginia-Pennsylvania region of the U.S. to study aerosol properties and cloud-aerosol interactions during overpasses of the CALIPSO satellite. Field work was conducted on selected days when CALIPSO ground tracks occurred in the region. Ground-based measurements included data from multiple Cimel sunphotometers that were placed at intervals along a segment of the CALIPSO ground-track. These measurements provided sky radiance and AOD measurements to enable joints inversions and comparisons with CALIPSO retrievals. As part of this activity, four ground-based lidars provided backscatter measurements (at 523 nm) in the region. Lidars at University of Maryland Baltimore County (Catonsville, MD) and Goddard Space Flight Center (Greenbelt, MD) provided continuous data during the campaign, while two micro-pulse lidar (MPL) systems were temporarily stationed at various field locations directly on CALIPSO ground-tracks. As a result, thirteen on-track ground-based lidar observations were obtained from eight different locations in the region. In some cases, nighttime CALIPSO coincident measurements were also obtained. In most studies reported to date, ground-based lidar validation efforts for CALIPSO rely on systems that are at fixed locations some distance away from the satellite ground-track. The CATZ ground-based lidar data provide an opportunity to examine vertical structure properties of aerosols and clouds both on and off-track simultaneously during a CALIPSO overpass. A table of available ground-based lidar measurements during this campaign will be presented, along with example backscatter imagery for a number of coincident cases with CALIPSO. Results indicate that even for a ground-based measurements directly on-track, comparisons can still pose a challenge due to the differing spatio-temporal properties of the ground and satellite observations. The multiple-lidar data during the CATZ campaign is expected to provide additional information on regional aerosol and cloud dynamics for give overpass, and enable a more realistic assessment of ground-to-satellite correlations. Future work is anticipated to finalize calibrated lidar backscatter profiles and utilization of wind trajectory information to further enable comparisons to CALIPS data.

Berkoff, Timothy↗
NASA NTRS1977

Thermospheric wind measurements in the polar region

In order to study the coupling of neutral atmospheric motions with solar wind induced effects, the neutral wind and ion flow velocities were simultaneously measured at an altitude of 225 km in the polar cap F-region by releasing barium and strontium tracers from sounding rockets launched on 22 and 24 August 1971, and 10 December 1972. Ion and neutral cloud trajectories for 22 and 24 August experiments were plotted, and in both cases an anti-solar flow was deduced from the ion tracks. During the December experiment a southern and northern cloud were observed, and the magnitude of the pressure force deduced from the southern cloud motion was found in agreement with OGO-6 measurements. This confirmed that a local temperature maximum is located in the winter polar thermosphere.

Kelley, M. C.↗