Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CUTTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Tether-Cutting Energetics of a Solar Quiet Region Prominence Eruption

We study the morphology and energetics of a slowly evolving quiet-region solar prominence eruption occurring on 1999 February 8-9 in the solar north polar crown region, using soft X-ray data from the soft X-ray telescope (SXT) on Yohkoh and Fexv EUV 284 Angstrom data from the EUV Imaging Telescope (EIT) on the Solar and Heliospheric Observatory (SOHO). After rising at approximately equal to l kilometer per second for about six hours, the prominence accelerates to a velocity of approximately equal to 10 kilometers per second, leaving behind EUV and soft X-ray loop arcades of a weak flare in its source region. Intensity dimmings occur in the eruption region cospatially in EUV and soft X-rays, indicating that the dimmings result from a depletion of material. Over the first two hours of the prominences rapid rise, flare-like brightenings occur beneath the rising prominence that might correspond to tether-cutting magnetic reconnection. These brightenings have heating requirements of up to approximately 10(exp 28)-10(exp 29) ergs, and this is comparable to the mechanical energy required for the rising prominence over the same time period. If the ratio of mechanical energy to heating energy remains constant through the early phase of the eruption, then we infer that coronal signatures for the tether cutting may not be apparent at or shortly after the start of the fast phase in this or similar low-energy eruptions, since the plasma-heating energy levels would not exceed that of the background corona.

Sterling, Alphonse C.↗
NASA NTRS2007

Cutting Edge Technologies Presentation: An Overview of Developing Sensor Technology Directions and Possible Barriers to New Technology Implementation

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A range of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption; and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity, However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This presentation gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology.

Hunter, Gary W.↗
NASA NTRS2012

Progress Towards a Cartesian Cut-Cell Method for Viscous Compressible Flow

We present preliminary development of an approach for simulating high Reynolds number steady compressible flow in two space dimensions using a Cartesian cut-cell finite volume method. We consider both laminar and turbulent flow with both low and high cell Reynolds numbers near the wall. The approach solves the full Navier-Stokes equations in all cells, and uses a wall model to address the resolution requirements near boundaries and to mitigate mesh irregularities in cut cells. We present a quadratic wall model for low cell Reynolds numbers. At high cell Reynolds numbers, the quadratic is replaced with a newly developed analytic wall model stemming from solution of a limiting form of the Spalart-Allmaras turbulence model which features a forward evaluation for flow velocity and exactly matches characteristics of the SA turbulence model in the field. We develop multigrid operators which attain convergence rates similar to inviscid multigrid. Investigations focus on preliminary verification and validation of the method. Flows over flat plates and compressible airfoils show good agreement with both theoretical results and experimental data. Mesh convergence studies on sub- and transonic airfoil flows show convergence of surface pressures with wall spacings as large as approx.0.1% chord. With the current analytic wall model, one or two additional refinements near the wall are required to obtain mesh converged values of skin friction.

Berger, Marsha↗
NASA NTRS2013

STS-114: Engine Cut-Off Sensors Are a No-Go: Teaching Notes for NASA Case Study

This case study format is intended to simulate the experience of facing the same difficult challenges and making the same critical decisions as managers, engineers, and scientists in the Space Shuttle Program. It has been designed for use in the classroom setting to help students develop skills related to decision-making. Students will read about the engine cut-off sensor anomaly which created challenges during the STS-114 mission and have the opportunity to make decisions as lead NASA engineers and Mission Management Team members. Included within this document are three case study presentation options - class discussion, group activity, and open-ended research. Please read the full case prior to in-class presentation to allow ample time for students' analysis and reflection, as well as to prepare additional questions. activities or exercises, material selection, etc. Depending upon the setting of your presentation and the number of participants, please choose at least one presentation format beforehand and plan accordingly. You may expect the following learning objectives by using the proposed formats. Learning Objectives: To enable students to experience the responsibilities of NASA management, engineers, and analysis; to discover possible procedures for investigating system anomalies; to become familiar with the liquid hydrogen low level engine cut-off sensor, including its function, connecting components, and location within the Space Shuttle; and to encourage critical analysis and stimulating discussion of Space Shuttle mission challenges.

Ransom, Khadijah S.↗
NASA NTRS2015

Identification and Evaluation of Integration and Cross Cutting Issues Across HRP Risks

The HRP Integrated Research Plan contains the research plans for the 32 risks requiring research to characterize and mitigate. These risks to human health and performance in spaceflight are identified by evidence and each one focuses on a single aspect of human physiology or performance. They are further categorized by aspects of the spaceflight environment, such as altered gravity or space radiation, that that play a major role in their likelihood and consequence. From its inception the "integrate" in the Research Plan has denoted the integrated nature of risks to human health and performance, the connectedness of physiological systems within the human body regardless of the spaceflight environment, and the integrated response of the human body to the spaceflight environment. Common characteristics of the spaceflight environment include altered gravity, atmospheres and light/dark cycles, space radiation, isolation, noise, and periods of high or low workload. Long term exposure to this unique environment produces a suite of physiological effects such as stress; vision, neurocognitive and anthropometric changes; circadian misalignment; fluid shifts, deconditioning; immune dysregulation; and altered nutritional requirements. Matrix diagraming was used to systematically identify, analyze and rate the many-to-many relationships between environmental characteristics and the suite of physiological effects. It was also to identify patterns in the relationships of common physiological effects to each other. Analyses of patterns or relationships in these diagrams help to identify issues that cut across multiple risks. Cross cutting issues benefit from a multidisciplinary approach that synthesizes concepts or data from two or more disciplines to identify and characterize risk factors or develop countermeasures relevant to multiple risks. They also help to illuminate possible problem areas that may arise when a countermeasure impacts risks other than those which it was developed to mitigate, or identify groupings of physiological changes that are likely to occur that may impact the overall risk posture.

Steinberg, S. L.↗
NASA NTRS1989

Cutting Head for Ultrasonic Lithotripsy

A cutting head for attachment to the end of the wire probe of an ultrasonic kidney stone disintegration instrument. The cutting head has a plurality of circumferentially arranged teeth formed at one end thereof to provide a cup-shaped receptacle for kidney stones encountered during the disintegration procedure. An integral reduced diameter collar diminishes stress points in the wire and reduces breakage thereof.

Angulo, Earl D.↗
NASA NTRS2019

Water-Saving Agriculture Can Deliver Deep Water Cuts for China

China is working hard to reconcile growing demands for freshwater with already oversubscribed renewable water resources. However, the knowledge essential for setting and achieving the intended water consumption cuts remains limited. Here we show that on-farm water management interventions such as improved irrigation and soil management practices for maize cultivation can lead to substantial water consumption reductions, by a simulated total of 28-46% (7-14 billion m3/year) nationally, with or without the impacts of climate change. The water consumption cut is equivalent to 16-31% of the ultimate capacity of the South-North Water Transfer Project. Much of the reduction is achievable at the populous and water-stressed North China Plain and Northeast China. Meanwhile, the interventions can increase maize production by an estimated 7-15%, meeting 22-28% of demand increase projected for 2050. The water management and food production improvements obtained are crucial for achieving multiple Sustainable Development Goals (SDGs) related to water, land, and food in China and far beyond.

Guorui Huang↗
DOE OSTI2019

Laser Cutting and Micromachining for Localized and Targeted Solar Cell Characterization

Laser cutting and micromachining can be applied to solar cell materials for processing and characterization applications. An ultrashort pulse (USP) laser with sub-picosecond pulse width can remove material with minimal thermal effects or damage, which is termed 'cold ablation'. Such USP laser cutting and scribing can be implemented for isolating areas within a larger cell while maintaining electrical performance and preventing laser-induced damage and shunting. Laser micromachining has been used to isolate a shunt to improve cell performance and to isolate a small, selected area to define a sample suitable for deep level transient spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2017

Pile Fuel Cladding Silo Deflector Plate Removal Project Using Long Reach Tooling and Suspended Abrasive Water Jet Cutting System - 17541

The Pile Fuel Cladding Silo (PFCS) at the Sellafield decommissioning, reprocessing and nuclear waste management facility in the UK was constructed in the late 1940-s and used for the storage of Intermediate Level Waste (ILW) arising from the Windscale Piles, Calderhall and Chapelcross Reactors until the 1960's. The PFCS is 21 metres high and comprises 6 identical tall compartments with the waste added to the silo via a charge-hole at the top of each compartment; each compartment is split by a central dividing wall that runs from the base of the silo to a few metres below the underside of the silo roof. A deflector plate assembly (DPA) supported on two horizontal beams is located between the top of the dividing wall and the roof and allowed the waste to spread as it fell into the silo and prevent excessive mounding. Sellafield Ltd is currently engaged in an overall programme of works to remove the waste for storage within modern ILW containers. Prior to the commencement of these works the Deflector Plate Assemblies (DPA) and beam structures within the silos are required to be removed to allow access for the waste retrievals equipment through the side of the silo at the point where the DPAs are situated. James Fisher Nuclear (JFN) and Sellafield Ltd have developed a system using suspended water jet cutting equipment combined with custom long reach tooling, installed through penetrations made in the side of the silo, to enable the remote size reduction of the DPA and beams within each compartment. The use of a low pressure suspended water jet cutting system has enabled a single water/abrasive hose to be routed down a tool deployment pole and allowed long hose lengths up to 80 m from pump to nozzle enabling siting of equipment on a congested and difficult access site. The use of lightweight, yet high strength, carbon fibre poles within the tools has enabled the deployment of tool end effectors at distances of up to 6.5 m from the compartment walls using a relatively small 60 mm diameter pole. This maximised articulation of the pole within the 300 mm wall penetrations to reach all areas of the DPA. Capability of the operators to install the tooling and size reduce DPA and beam assemblies have been demonstrated through the training on a Full Scale Test Rig (FSTR). The FSTR was integral to the development of the equipment and techniques and to providing assurance to the client that the project was technically achievable given the tight building restraints and safety issues. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Evaluation of Caprolon Turning Efficiency with a Ceramic Cutting Tool

A comparative analysis is provided for turning caprolon using replaceable polyhedral plates made from different materials, and in fact made of tungsten-cobalt alloy VK8 and ceramic material, i.e., tungsten-free hard alloy KNT60. It is established by experiment that for machining caprolon workpieces it is expedient to use replaceable cutting tools made from ceramic materials KNT60, which makes it possible to expand the range of tools used and improve turning efficiency as a whole.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Mineralogy of Drill Cuttings Beowawe, Dixie Valley and Roosevelt Hot Springs

Mineralogical, lithological, and geospatial data of drill cuttings from exploration production wells in Beowawe, Dixie Valley and Roosvelt Hot Springs. These data support whole rock analyses for major, minor and critical elements to assess critical metals in produced fluids from Nevada and Utah geothermal fields. The samples were analyzed by x-ray diffraction (legacy data) and then checked by thin section analysis.

15 GEOTHERMAL ENERGY↗
DOE OSTI2018

Strength Ranking of Hard-Alloy Cutting Inserts of Different Shape

The stress–strain state of replaceable polyhedral inserts in composite tools is calculated by the finite-element method. The influence of the insert’s design parameter, the basing and attachment configuration, and the load on the stress and strain is established. Besides the strength of the inserts, attention is paid to the positional accuracy in the tool housing. Cutting inserts of maximum strength have been developed and patented.

42 ENGINEERING↗
DOE OSTI2019

Sulfide Transformation with Tellurium Treatment for Y15 Free-Cutting Steel

To investigate the effect of tellurium on the morphology of sulfide, various amounts of tellurium powders were added to the Y15 free-cutting commercial steel melt and then the melt was cooled in different cooling modes. The composition and morphology of sulfide and telluride in steel were analyzed to investigate the mechanism of MnS transformation combined with in situ observation. The results showed that the precipitation of chain-like MnS inclusions was significantly inhibited due to the addition of tellurium, and these MnS inclusions were transformed into complex inclusions with lower aspect ratios, which were composed of MnS and MnTe. In air-cooling mode, the MnS inclusions were effectively spheroidized when the w([Te])/w([S]) in steel was 0.2, whereas tellurium had almost no effect on the morphology of sulfide in furnace-cooling mode. The mechanism of sulfide spheroidization is discussed. The mechanism was verified by in situ observation experiment through high-temperature laser confocal microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Mathematical modelling and linear stability analysis of laser fusion cutting

A model for laser fusion cutting is presented and investigated by linear stability analysis in order to study the tendency for dynamic behavior and subsequent ripple formation. The result is a so called stability function that describes the correlation of the setting values of the process and the process’ amount of dynamic behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

CUT&RUN identifies centromeric DNA regions of Rhodotorula toruloides IFO0880

ABSTRACT Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

A Parallel Cut-Cell Algorithm for the Free-Boundary Grad--Shafranov Problem

A parallel cut-cell algorithm is described to solve the free-boundary problem of the Grad--Shafranov equation. The algorithm reformulates the free-boundary problem in an irregular bounded domain and its important aspects include a searching algorithm for the magnetic axis and separatrix, a surface integral along the irregular boundary to determine the boundary values, an approach to optimize the coil current based on a targeting plasma shape, Picard iterations with Aitken's acceleration for the resulting nonlinear problem, and a Cartesian grid embedded boundary method to handle the complex geometry. Here the algorithm is implemented in parallel using a standard domain-decomposition approach and a good parallel scaling is observed. Numerical results verify the accuracy and efficiency of the free-boundary Grad--Shafranov solver.

97 MATHEMATICS AND COMPUTING↗