SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electron paramagnetic resonance spectrum of carbon dioxide adsorbed on ultraviolet irradiated magnesium oxide and formation of negative carbon dioxide radical ions
Consideration is given to the technique of producing oxygen on Mars from CO2 in the Martian atmosphere via in situ propellent production (ISPP). Mission implications of ISPP for both manned and unmanned Mars missions are described as well as ways to improve system reliability. Technology options that improve reliability and reduce power requirements include the use of adsorption pumps and advanced zirconia membranes. It is concluded that both manned and unmanned missions will benefit greatly from ISPP, especially in the context of a permanent manned base on Mars.
Explore the source record for details and available documents.
The diffusive and adsorptive properties of the Martian regolith influence the exchange of volatiles between the atmosphere and subsurface. Our quantitative knowledge of these properties is extremely poor -introducing substantial uncertainties in efforts to model long-term evolution of ground ice and diurnal, seasonal, and climatic cycles of CO2 and H20. This situation should significantly improve upon arrival of the 2001 Mars Surveyor Lander in 2002. In support of the Human Exploration and Development of Space (HEDS) enterprise, the 2001 mission will include a suite of instruments to characterize the nature of the Martian environment and assess whether it contains hazards that may threaten future human exploration. A major element of this effort is the Mars Environmental Compatibility Assessment (MECA) payload, which consists an optical microscopy system incorporating electrostatic, magnetic, and scratch-hardness materials testing palets, an atomic force microscope with imaging capabilities comparable to an SEM, a wet chemistry laboratory with four independent test cells, an electrometer on the robotic arm, material test patches, a camera also mounted on the arm, and a soil scoop for excavating down to about 50 cm into the soil. Although conceived to address the needs of HEDS, MECA payload is a sophisticated soil science laboratory that should provide a wealth of new data relevant to the volatile transport and storage properties of the regolith. Additional information os contained in the original.
The adsorption, partitioning, and diffusion of CO 2 and CH 4 in organic–inorganic pores composed of kerogen with silica, illite, or calcite are studied using density functional theory and classical molecular dynamics simulations. The adsorption and partitioning behavior of CO 2 and CH 4 molecules is found to be a function of chemistry of the solid interface, pore size, and surface area. CO 2 molecules are preferentially adsorbed compared to CH 4 molecules on silica, illite, calcite, and kerogen surfaces due to significant contributions of electrostatic interactions with the atoms of the associated surfaces. CO 2 and CH 4 molecules display higher adsorption energy on calcite and silica compared to those on illite and kerogen because of enhanced interactions with the positively charged calcium ions on the calcite surface and the hydroxyl group (-OH) on the silica surface. Enhanced internal nanopores and the availability of adsorption active sites in illite and kerogen matrices aid in higher partitioning of the gas molecules into these pores. CO 2 has a significant influence on the clustering and swelling of kerogen fragments compared to CH 4 . Higher CO 2 adsorption on inorganic and kerogen surfaces results in lower overall self-diffusivities compared to CH 4 . This study illustrates surface and pore size controls on the adsorption, partitioning, and self-diffusivities of CO 2 and CH 4 at conditions relevant for subsurface energy applications. The chemistry of the surfaces along with the availability of internal pores and active adsorption sites influences the adsorption behavior of gases. Our results suggest that CO 2 stored in depleted gas reservoirs may preferentially inhabit nanoconfined pores.
A combination of in situ small-angle X-ray scattering (SAXS) microstructure characterization over scales ranging from 1 nm to 10 µm and powder X-ray diffraction (XRD) structure characterization under various gas/pressure/temperature conditions with density functional theory (DFT) calculations provides new insights for the CO2 sorption behavior of a one-dimensional porous coordination polymer: catena-bis(dibenzoylmethanato)(4,4′-bipyridyl)nickel(II), denoted NiDBM-Bpy. The NiDBM-Bpy chains are held together by van der Waals forces, but the structure of guest-free NiDBM-Bpy is unsolved due to a lack of suitable crystals and high-quality powder XRD patterns. Nevertheless, SAXS and powder XRD can follow microstructural and structural changes as a function of gas pressure, composition and temperature. Both mixed-gas flow and static supercritical CO2 regimes are explored experimentally. DFT calculations are used to model the structural variation associated with XRD changes and hysteresis in the sorption isotherms. XRD and DFT calculations suggest that an orthorhombic Fddd structure with two CO2 per Ni emerges following a transition from the structure with lower molar volume and symmetry that exists without CO2 present.
We have measured the adsorption of molecular nitrogen (N2) on palagonite, and modeled the adsorbed nitrogen inventory on the martian regolith. We were motivated by the fact that models of isotopic evolution predict stronger N2 fractionation than reported by Viking. Possible scenarios for reconciling models with the observation include a heavy CO2 atmosphere early in the planet's history, continued outgassing of N2 throughout the history of Mars, or a substantial adsorbed inventory. In this paper we investigate the plausibility of the last explanation. We find that the regolith reservoir of adsorbed N2 is inadequate by itself to buffer the atmospheric isotopic composition, but may play a role depending on the total regolith surface area available.
Since the identification of the OH radical as an interstellar species, over 50 molecular species were identified as interstellar denizens. While identification of new species appears straightforward, an explanation for their mechanisms of formation is not. Most astronomers concede that large bodies like interstellar dust grains are necessary for adsorption of molecules and their energies of reactions, but many of the mechanistic steps are unknown and speculative. It is proposed that data from matrix isolation experiments involving the reactions of refractory materials (especially C, Si, and Fe atoms and clusters) with small molecules (mainly H2, H2O, CO, CO2) are particularly applicable to explaining mechanistic details of likely interstellar chemical reactions. In many cases, matrix isolation techniques are the sole method of studying such reactions; also in many cases, complexations and bond rearrangements yield molecules never before observed. The study of these reactions thus provides a logical basis for the mechanisms of interstellar reactions. A list of reactions is presented that would simulate interstellar chemical reactions. These reactions were studied using FTIR-matrix isolation techniques.
Direct air capture (DAC) is a growing field responding to the need to remove carbon dioxide from the atmosphere. Several technologies are being developed today attempting to meet this need. The technology furthest in development are temperature swing adsorption technologies which have recently moved out of the pilot plant scale.1 This presentation looks to present an electrochemical device as alternative to these technologies. The electrochemical device proposed is a pair of nickel hydroxide (Ni(OH)2) battery electrodes which produce hydroxide (OH-). The hydroxide reacts with carbon dioxide (CO2) to create carbonate (CO32-) and bicarbonate (HCO3-). These carbonates can be transported from the cathode across an anion exchange membrane to the anode where they are evolved back into CO2 due to a pH reduction at the anode. This builds on work that optimized a Hydroxide Exchange Membrane Fuel Cell (HEMFC) for CO2 capture, showing the efficacy of an electrochemically mediated pH swing carbon capture device.2,3 The benefit of the nickel hydroxide battery approach is the low energy cost associated with separation. Because a pair of nickel hydroxide batteries undergo the same electrochemical reaction, low potentials, and thus low energy cost is required. Experiments have shown device level energy requirements of less than 1 MWh ton-1CO2. Most of the energy required by the device produces the pH gradient used to capture and release CO2. The biggest hurdle for this electrochemical approach is increasing the flux of CO2 to allow for more compact devices. Strategies for managing the transient charge and discharge behavior of the battery system will be discussed. Focus will be on improving flux to reduce the overall cost of the device.
Conversion of CO 2 to reduced products is a promising route to alleviate irreversible climate change. In this paper we report the synthesis of a Co-based phthalocyanine with pyridine moieties (CoPc-Pyr), which is supported on a carbon electrode and shows Faradaic efficiency ~90% for CO at 490 mV of overpotential (-0.6 V vs reversible hydrogen electrode (RHE)). In addition, its catalytic activity at -0.7 V versus RHE surpasses other Co-based molecular and metal-organic framework catalysts for CO 2 reduction at this bias. Density functional theory calculations show that pyridine moieties enhance CO 2 adsorption and electron affinity of the Co center by an inductive effect, thus lowering the overpotential necessary for CO 2 conversion. Our study shows that CoPc-Pyr reduces CO 2 at lower overpotential and with higher activity than noble metal electrodes, such as silver.
Current obstacles that prevent commercial implementation of amine-scrubbing CO2 capture are the high costs. Reducing capital costs by appropriate selection of construction materials, which requires knowledge of material corrosion performance for the process, will improve the economic feasibility of this technology. Corrosion was evaluated in three pilot plant campaigns using aqueous piperazine with the Advanced Stripper (PZAS). 316L stainless steel (SS) experienced higher corrosion than 304 SS and 2205 duplex SS, and the corrosion rate showed strong dependence on the temperature. 304 and 2205 performed well at all locations and should be good construction materials for PZAS. Degraded PZ exacerbated 316L corrosion, and removal of PZ degradation products using a carbon adsorption bed significantly reduced corrosion. Carbon steel (CS) corrosion showed a weak temperature effect because the corrosion was more dependent on the protective siderite film. The protectiveness of the films was related to fluid velocity. Ni-based alloys corroded in PZ, and the rate increased with temperature. Corrosion of C1010 CS and SS (304, 316L, 430) was measured at absorber and water wash conditions on the bench-scale. Corrosion rate decreases with increasing PZ. 8 With more than 0.003 m PZ in solution, CS has acceptable corrosion performance. Corrosion of CS increases with increasing partial pressure of CO2, suggesting loading is another dominant parameter for carbon steel corrosion. Temperature has a less significant effect than PZ concentration and loading. CS corrosion increases with increasing flow velocity at both absorber and water wash conditions. SS had little corrosion at this lower temperature. Performance of siderite (FeCO3) protective films on CS was studied at representative stripper conditions on the bench-scale. Siderite films can deposit on the surface of CS in CO2-loaded PZ solution at temperatures >100 °C and protect CS from corrosion. The protection may fail in degraded PZ. Ethylenediamine (EDA) is one of the major contributors for the loss of film protectiveness or can be the surrogate for the effect of PZ degradation on siderite film protection. A link between protectiveness and the apparent density of siderite films was discovered. The apparent density of siderite films decreases with increasing flow velocity and decreasing CO2 loading, resulting in higher corrosion of CS.
The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.
Here a dual function material (DFM) comprised of 1% Ru, 10% Na 2 O/γ–Al 2 O 3 was studied for combined direct air capture (DAC) of CO 2 and catalytic methanation in a temperature swing operation. In the newly proposed operation, the DFM captures CO 2 (400 ppm) from air at ambient conditions. The material is then heated in H 2 to a temperature sufficient for catalytic conversion of the captured CO 2 to renewable natural gas. In this study, we demonstrate high CO 2 adsorption capacity and rates at ambient conditions (25 °C); the adsorbed CO 2 is then successfully catalytically methanated upon heating in H 2 . Adsorption was also carried out in humid conditions, more closely simulating ambient air. Adsorption and methane production were greatly improved with stable initial performance. The rate of adsorption is shown to be flowrate-dependent, which is critical for future reactor design.
U.S. Patent 6,142,151 describes a dual-bed ventilation system for a space suit, with emphasis on a multiport spool valve that switches air flows between two chemical beds that adsorb carbon dioxide and water vapor. The valve is used to alternately make the air flow through one bed while exposing the other bed to the outer-space environment to regenerate that bed through vacuum desorption of CO2 and H2O. Oxygen flowing from a supply tank is routed through a pair of periodically switched solenoid valves to drive the spool valve in a reciprocating motion. The spool valve equalizes the pressures of air in the beds and the volumes of air flowing into and out of the beds during the alternations between the adsorption and desorption phases, in such a manner that the volume of air that must be vented to outer space is half of what it would be in the absence of pressure equalization. Oxygen that has been used to actuate the spool valve in its reciprocating motion is released into the ventilation loop to replenish air lost to vacuum during the previous desorption phase of the operating cycle.
The Carbon Dioxide Removal and Compression System (CRCS) is designed to perform both the Carbon Dioxide(CO2) removal and compress CO2 for further processing. The CRCS was designed as a lower power requirement option to the one currently being used on the International Space Station (ISS). This paper describes the final design, fabrication, assembly, and testing of the integrated CRCS. Initial results indicated that the spiral heaters used did not yield uniform heating within both the adsorption and compression beds. In addition, the heaters for the compression bed were insufficient and an additional HVAC jacket was employed to provide heat to the bed.
We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O 2 in the CO 2 /N 2 gas mixture results in an up to 11 times higher CO 2 adsorption capacity with 3 M MgBr 2 (at 0.6 V) and up to 4–5 times higher adsorption capacity with 3 M MgCl 2 (at 1 V). A tradeoff between high CO 2 adsorption capacities and lower coulombic efficiencies was observed at voltages above 0.6 V. The energetic and adsorptive performance of the electrodes in the presence of oxygen below 0.5 V was similar to the performance with a CO 2 /N 2 mixture without oxygen at 1 V. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the electrodes demonstrate that the specific capacitance increases while the diffusion resistance decreases in the presence of oxygen. Oxygen concentrations ranging between 5–20 % give similar energetic and adsorptive performance. The electrodes exhibit stable performance for up to 100 cycles of operation.
This study investigates a novel environmentally friendly coating technique using yeast fermentation to obtain super porous Zeolite 13X adsorbent layers through freeze-drying technique for CO 2 capture applications. Several mass ratios of sugar to yeast were used to control the porosity and pore sizes in the adsorbent layer. A unique peeling process was integrated to obtain foamy, hollow structures to have deeper layer accessibility of adsorbent for adsorption applications. These coated adsorbent layers were experimentally characterized as a function of the mass ratio of sugar to yeast and adsorbent solid fraction. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FT-IR) are used to analyze the coated layers. Here, the void fraction for coated samples is found to vary between 0.48 and 0.56, making the samples applicable for adsorption applications. Adsorption performance experiments are performed to test the coated samples' performance compared to 13X powder. Due to their simplistic fabrication, cost-effectiveness, rapid pore formation, and high adsorption capacity, these porous 13X layers hold potential for large-scale fabrication and CO 2 capture applications.
The density functional theory method was used to investigate the conversions of CO 2 to ethylene formation on two common iron carbide surfaces: Fe 3 C(0 1 0) and Fe 5 C 2 (1 1 1). Based on the structure relaxation of reaction intermediates and the elementary reaction transition states. We deduced the most competitive reaction pathways for ethylene production. The main CO 2 -to-ethylene routes and the competition of side products, CO and CH 4 , are discussed. Our analyses showed that CO 2 conversion is surface structure sensitive, whereas CH 4 and C2+ hydrocarbon formations depend on the reactivity of native C atoms in the carbides. To modify the intrinsic catalyst performance, mixing dopants in Fe catalysts is an effective strategy. Furthermore, we demonstrate that doping Zn and Zr can alter the local electronic structure and enhance CO 2 adsorption on the catalyst surface.