Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLADDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Used Fuel Disposition Campaign: Phase I Ring Compression Testing of High-Burnup Cladding

The purpose of ring compression testing is to generate data to support the development of the technical basis for extended storage and transportation of high-burnup fuel. Argonne National Laboratory developed the methodology of using ring compression tests (RCTs) for radial-hydride-treated (RHT) cladding to generate data for the Nuclear Regulatory Commission (NRC) on the behavior of high-burnup Zircaloy-4 (Zry-4) and ZIRLO™ cladding. The RHT/RCT methodology is an established test protocol accepted by NRC for generating data to support the technical basis for licensing storage and transportation casks with high-burnup fuel. In July 2011, Phase I testing for DOE on high-burnup M5 ® cladding was initiated under the ANL FY11 Work Package Transportation; Phase I testing for DOE on high-burnup M5 ® cladding continued into fiscal year 2012 under the ANL FY12 Work Package Engineering Materials Experimental. This report highlights the results of completed Phase I testing of high-burnup M5 ® cladding and the revised three-year test plan, which is included in the Appendix.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of Plate Size on Peak Cladding Strain

A typical monolithic plate will be simulated with different cladding thickness surrounding the “meat” which remain the same at all cases. The nominal case is a symmetric plate with plate size of L1P754 in experiment RERTR-12. Total of three cases in addition to the nominal case were simulated. One case with cladding thickness of 1.4 times that of the nominal case (thicker cladding) and another two cases with cladding thickness of 0.85 and 0.75 times the nominal case (thinner and thinnest cladding).

Mohamed, Walid M. F.↗

Used Fuel Disposition Campaign: Embrittlement and DBTT of High-Burnup PWR Fuel Cladding Alloys

Structural analyses of high-burnup (HBU) fuel require cladding mechanical properties and failure limits to assess fuel behavior during long-term dry-cask storage and transportation. Pre-storage drying-transfer operations and early stage storage subject cladding to higher temperatures and pressure-induced tensile hoop stresses relative to in-reactor operation and pool storage. Under these conditions, radial hydrides may precipitate during slow cooling and provide an additional embrittlement mechanism as the cladding temperature decreases below the ductile-to-brittle transition temperature (DBTT). On the basis of previous test results, susceptibility to radial-hydride precipitation depends on cladding material and microstructure, hydrogen content (CH), and pre-drying hydride distribution, as well as peak hoop stresses and temperatures during drying operations and storage. Susceptibility to embrittlement depends on the extent of radial-hydride precipitation, the number density of circumferential hydrides, and the thickness of the outer-surface hydride rim. The goal of the testing program is to determine drying-storage conditions for which the cladding remains ductile at ambient temperature, in other words, with the DBTT ≤20°C.

Billone, M. C.↗

Capture of Tritium Released from Cladding in the Zirconium Recycle Process

Zirconium may be recovered from the Zircaloy® cladding of used nuclear fuel (UNF) for recycle or to reduce the quantities of high-level waste destined for a geologic repository. Recovery of zirconium using a chlorination process is currently under development at the Oak Ridge National Laboratory. The approach is to treat the cladding with chlorine gas to convert the zirconium in the alloy (~98 wt % of the alloy mass) to zirconium tetrachloride. A significant fraction of the tritium (0–96%) produced in nuclear fuel during irradiation may be found in zirconium-based cladding and could be released from the cladding when the solid matrix is destroyed by the chlorination reaction. To prevent uncontrolled release of radioactive tritium to other parts of the plant or to the environment, a method to recover the tritium may be required. The focus of this effort was to (1) identify potential methods for the recovery of tritium from the off-gas of the zirconium recycle process, (2) perform scoping tests on selected recovery methods using nonradioactive gas simulants, and (3) select a process design appropriate for testing on radioactive gas streams generated by the engineering-scale zirconium recycle demonstrations on radioactive used cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Capture of Tritium Released from Cladding in the Zirconium Recycle Process

This report is issued as the first revision to FCRD-MRWFD-2016-000297. Zirconium may be recovered from the Zircaloy® cladding of used nuclear fuel (UNF) for recycle or to reduce the quantities of high-level waste destined for a geologic repository. Recovery of zirconium using a chlorination process is currently under development at the Oak Ridge National Laboratory. The approach is to treat the cladding with chlorine gas to convert the zirconium in the alloy (~98 wt % of the alloy mass) to zirconium tetrachloride. A significant fraction of the tritium (0–96%) produced in nuclear fuel during irradiation may be found in zirconium-based cladding and could be released from the cladding when the solid matrix is destroyed by the chlorination reaction. To prevent uncontrolled release of radioactive tritium to other parts of the plant or to the environment, a method to recover the tritium may be required. The focus of this effort was to (1) identify potential methods for the recovery of tritium from the off-gas of the zirconium recycle process, (2) perform scoping tests on selected recovery methods using non-radioactive gas simulants, and (3) select a process design appropriate for testing on radioactive gas streams generated by the engineering-scale zirconium recycle demonstrations on radioactive used cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis and Experimental Qualification of an Irradiation Capsule Design for Testing Pressurized Water Reactor Fuel Cladding in the High Flux Isotope Reactor

The Advanced Fuels Campaign within the Fuel Cycle Research and Development program of the Department of Energy Office of Nuclear Energy is currently investigating a number of advanced nuclear fuel cladding concepts to improve the accident tolerance of light water reactors. Alumina-forming ferritic alloys (e.g., FeCrAl) are some of the leading candidates to replace traditional zirconium alloys due to their superior oxidation resistance, provided no prohibitive irradiation-induced embrittlement occurs. Oak Ridge National Laboratory has developed experimental designs to irradiate thin-walled cladding tubes with representative pressurized water reactor geometry in the High Flux Isotope Reactor (HFIR) under relevant temperatures. These designs allow for post-irradiation examination (PIE) of cladding that closely resembles expected commercially viable geometries and microstructures. The experiments were designed using relatively inexpensive rabbit capsules for the irradiation vehicle. The simplistic designs combined with the extremely high neutron flux in the HFIR allow for rapid testing of a large test matrix, thus reducing the time and cost needed to advanced cladding materials closer to commercialization. The designs are flexible in that they allow for testing FeCrAl alloys, stainless steels, Inconel alloys, and zirconium alloys (as a reference material) both with and without hydrides. This will allow a direct comparison of the irradiation performance of advanced cladding materials with traditional zirconium alloys. PIE will include studies of dimensional change, microstructure variation, mechanical performance, etc. This work describes the capsule design, neutronic and thermal analyses, and flow testing that were performed to support the qualification of this new irradiation vehicle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Survey on cladded component design procedures for nuclear and non-nuclear applications

Corrosion resistant weld overlay and integral claddings are used to provide corrosion resistance to components made of structural materials that are susceptible to corrosion. Generally, cladding is used in industry to offset the cost of expensive corrosion resistance alloys. In the application to nuclear, cladding provides a mechanism to allow use of limited code approved base materials in corrosive environments. Applicable design rules will need to be developed to support the design and construction of these cladded components for MSR applications. This document provides a survey of the state-of-the-art in design practice of cladded components for both the nuclear and non-nuclear industry. Design practice and service experience in the nuclear and non-nuclear is investigated. A gap analysis on applying these design practice to nuclear applications is included.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Developing a Macro-scale SiC-cladding Behavior Model Based on Localized Mechanical and Thermal Property Evaluation on Pre- and Post-Irradiation SiC-SiC Composites (Final Report)

Silicon carbide is being investigated for accident tolerant fuel cladding applications due to its good neutronic performance, high temperature strength, exceptional stability under irradiation, and reduced oxidation compared to Zircaloy under accident conditions. The development and investigation of these materials is particularly important in the light of the Fukushima event and subsequent emphasis in DOE on accident tolerant fuel (ATF) concepts. In this work, we propose to develop and improve upon existing small-scale mechanical and thermal characterization methods, including micro-cantilever bend tests and fiber push-out tests, and time-domain thermo-reflectance measurements. These techniques will be applied to evaluate micro-scale properties of SiC-SiC composite constituents (matrix, fibers, interphase). The results will be coupled with meso-scale fiber and void structural information and be used as input to develop a comprehensive, finite element-based model based on constituent properties. The goal of this multi-scale model is to be used to predict anisotropic mechanical and thermal cladding behaviors. The model will be benchmarked against measurements of bulk properties and validated for radiation-damaged materials by utilizing irradiated SiC-SiC composites available from General Atomics. The characterization approach developed under this program will have particular application in the property prediction of reactor irradiated materials, as only small volumes need to be tested, minimizing associated hazards and costs. The micro-scale test methods developed here will be used along with meso-scale structural data to inform a finite element model of the full SiC-based cladding system. This model will capture fabrication and irradiation effects and importantly include for the first-time separate material data for each system component. The incorporation of these micro-scale effects will lead to a more accurate model of SiC-SiC composite behavior, enabling further advancements in the development and design of SiC-based materials for improved fuel cladding performance. The aim of this work is to develop advanced localized material characterization techniques to directly measure mechanical and thermal properties of the individual constituents of SiC-based claddings at the relevant micro-scale. SiC-SiC composites will be evaluated before and after irradiation and these results will be coupled with macro-scale properties and microstructural information in order to provide the input parameters for a comprehensive finite element model, which will be developed in this program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plane-Strain Tension Testing of ATF FeCrAl Cladding (Progress Report)

Performance of advanced accident-tolerant fuel (ATF) claddings must be assessed under all relevant scenarios, including normal and off-normal operating conditions, as well as during a reactivity-initiated accident (RIA). During RIA, the fuel pellet may expand and cause significant loads on cladding, a condition known as pellet cladding mechanical interaction (PCMI), which may even lead to cladding failure. This report describes the fiscal year (FY) 2020 research activities and results from the development of separate-effects testing for ATF cladding candidate iron-chromium-aluminum (FeCrAl) tube specimens under loading conditions expected during RIA/PCMI events. To assess material performance under PCMI, a high strain rate burst test, often termed the modified burst test (MBT), is commonly employed. However, execution of such a test in a hot cell requires significant research. To overcome the complexities of performing MBTs in a hot-cell environment on irradiated samples, a plane-strain tension (PST) test was proposed by several authors as an alternative approach for PCMI testing. A new fixture was developed so that PST specimens could be tested using a more accommodating design for hot-cell manipulators. This report presents the PST fixture design, evaluates the possibility of modifying the specimen geometry, and discusses experimental results with unirradiated Al 6061 and FeCrAl tubes at various lengths. Furthermore, this report discusses the relevance and compatibility of the PST results to RIA scenarios and compares the PST and MBT results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of Coating Defects on Performance of Coated Zirconium Cladding

Research on accident tolerant fuels (ATF) has started after the Fukushima accident [1–3]. While efforts have been expended on both fuel and cladding ATF concepts, the bulk of work has been devoted to improved cladding. The overarching goal of these approaches is to extend the coping time available during a severe accident before any event would result in release of radioactivity to the public. The most basic ATF cladding concept is obtained by applying a thin coating of highly corrosion-resistant material on the surface of a licensed zirconium cladding alloy. This thin coating is intended to not interfere with the neutronic or mechanical performance of the base cladding under normal operating conditions. Different coating materials, thicknesses, coating processes, process parameters, and testing methods have an impact on the microstructure and mechanical properties and therefore on the results of the applied investigation methods. These challenges have motivated an initial focus on demonstrating that the presence of coatings do not perturb the critical performance benchmarks of uncoated material. Ongoing lead test assembly irradiations of coated zirconium concepts in commercial reactions is intended to establish baseline performance in this regard in the coming years.

36 MATERIALS SCIENCE↗

Impact of LWR Assembly Structural Features on Cladding Burst Behavior under LOCA Conditions

This report builds on the previous work by assessing the impact of assembly structural features on cladding balloon and burst behavior. The BISON fuel performance code was used to generate two dimensional RZ meshes containing structural features commonly used in nuclear fuel assemblies. The results were then compared to the cladding burst temperature and balloon strain results from the previous work. A mesh sensitivity study was performed to ensure spacer grid effects were appropriately considered, resulting in a more refined mesh than the previous study. The balloon deformation and burst times of the cladding were compared. Consideration was also given to the effect of rod initial pressure. Overall, the BISON simulations indicated the spacer grids can locally influence cladding performance, however, the impact on the cladding performance was minor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Review and Summary of Corrosion Behavior for Aluminum-Clad Spent Nuclear Fuel in Dry Storage

A description of the corrosion behavior of aluminum alloys used for cladding on aluminum-based, aluminum-clad nuclear fuel used in research reactors under potential dry storage conditions has been compiled. An evaluation is made of potential additional corrosion with water postulated to not be removed during drying. The relative humidity (RH) produced by typical dryness criteria for industrial spent nuclear fuel drying is expected to be low, particularly at high temperatures (17% RH at 20°C and lower at higher temperatures). Existing corrosion data suggests that negligible vapor-phase corrosion of aluminum is expected at such low humidity, even for nominally bare aluminum surfaces. That is, the predicted relative humidity from free water (e.g., 17% RH) is below the “critical” relative humidity (~40% RH at room temperature), below which no significant corrosion is observed for bare aluminum. Furthermore, reported room-temperature corrosion rates are very low even under saturated (100% RH) water vapor. Existing results showing significant vapor-phase corrosion corresponded specifically to conditions of high temper ed with high relative humidity. A relatively large reservoir of (chemically bound) water exists in the aluminum (oxy)hydroxide films on the SNF cladding surface. The estimated total could saturate the gas even at relatively high temperature if fully released; however, its release as molecular water is expected to only be plausible if the temperature during storage exceeds both the drying temperature and the threshold for thermal decomposition of the trihydroxides (~220°C). Therefore, the combination of high temperature and high relative humidity that could drive significant corrosion is considered implausible during sealed dry storage following an appropriate drying process, to include >220°C drying for canisters that may approach or exceed this temperature during storage. Vapor-phase testing of aluminum samples with an adherent (oxy)hydroxide layer, prepared in liquid water to resemble those on actual aluminum-clad spent nuclear fuel (ASNF), did not observe evidence of additional corrosion even at combined high-temperature (up to 180°C) and high-humidity (up to 100% RH) conditions. Instead, small net mass losses were observed for most specimens and attributed to dehydration of the samples, which had been air-dried only prior to testing. ASNF being moved to dry storage is expected to have an existing (oxy)hydroxide film, suggesting that the cladding will be less prone to additional corrosion than bare aluminum metal. If significant corrosion did occur during sealed storage, the overall extent and impact is expected to be small. Corrosion post-closure of a canister would not alter the total amount of hydrogen in the canister, so it would have no effect on the maximum H 2 release already assessed in existing bounding calculations. In addition, the total amount of water in a 25-µm dense bayerite film would consume a only ~8 µm additional aluminum metal on average, if fully consumed by oxidizing aluminum metal to Al 2 O 3 . These conclusions are consistent with ASNF-in-canister simulations to date, which included a reaction pathway for corrosion using kinetics from previous literature and believed to be conservative and predicted very low rates of corrosion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of Internal and External Heat Sources on Cladding Microstructure and Rupture Performance

In the event of a Loss of Coolant Accident (LOCA), the primary supply of cooling water for a nuclear reactor is lost, leading to a significant pressure differential across the cladding wall. Without adequate cooling, the fuel rods continue to heat as a result of fission reactions. Research at Oak Ridge National Laboratory’s (ORNL’s) Severe Accident Test Station (SATS) is currently focused on evaluating fuel cladding performance using an external infrared lamp as a heat source, whereas legacy testing primarily utilized an internal heating approach. While external heating may better simulate the effect of neighboring fuel rods heating a central rod, it may not accurately represent the internal heat absorption from the fuel during accident transients. The heating dynamics depend greatly on the fuel rod's position within the bundle and the reactor. To fully understand the implications of a LOCA event and assess the influence of internal heating on cladding performance, combined internal heating and pressurization capability was developed at ORNL. Tests were conducted to compare cladding segments heated internally (representing heat from the fuel within the rod) and externally (representing heat from adjacent fuel rods). The findings indicate that both internal and external heating result in comparable rupture temperatures during 5°C/s laboratory LOCA tests and also agree with legacy test data. Axial temperature gradients and internal heat source dispersal were found to significantly impact cladding deformation and rupture geometry. Clear modifications were outlined to further improve the capability with heating rates above 5°C/s.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of Internal and External Heat Sources on Cladding Microstructure and Rupture Performance

In the event of a Loss of Coolant Accident (LOCA), the primary supply of cooling water for a nuclear reactor is lost, leading to a significant pressure differential across the cladding wall. Without adequate cooling, the fuel rods continue to heat as a result of fission reactions. Research at Oak Ridge National Laboratory’s (ORNL’s) Severe Accident Test Station (SATS) is currently focused on evaluating fuel cladding performance using an external infrared lamp as a heat source, whereas legacy testing primarily utilized an internal heating approach. While external heating may better simulate the effect of neighboring fuel rods heating a central rod, it may not accurately represent the internal heat absorption from the fuel during accident transients. The heating dynamics depend greatly on the fuel rod's position within the bundle and the reactor. To fully understand the implications of a LOCA event and assess the influence of internal heating on cladding performance, combined internal heating and pressurization capability was developed at ORNL. Tests were conducted to compare cladding segments heated internally (representing heat from the fuel within the rod) and externally (representing heat from adjacent fuel rods). The findings indicate that both internal and external heating result in comparable rupture temperatures during 5°C/s laboratory LOCA tests and also agree with legacy test data. Axial temperature gradients and internal heat source dispersal were found to significantly impact cladding deformation and rupture geometry. Clear modifications were outlined to further improve the capability with heating rates above 5°C/s.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Magnetic Field Sensing via Acoustic Sensing Fiber with Metglas® 2605SC Cladding Wires

Magnetic field sensing has the potential to become necessary as a critical tool for long-term subsurface geophysical monitoring. The success of distributed fiber optic sensing for geophysical characterization provides a template for the development of next generation downhole magnetic sensors. In this study, Sentek Instrument’s picoDAS is coupled with a multi-material single mode optical fiber with Metglas® 2605SC cladding wire inclusions for magnetic field detection. The response of acoustic sensing fibers with one and two Metglas® 2605SC cladding wires was evaluated upon exposure to lateral AC magnetic fields. An improved response was demonstrated for a sensing fiber with in-cladding wire following thermal magnetic annealing (~400 °C) under a constant static transverse magnetic field (~200 μT). A minimal detectable magnetic field of ~500 nT was confirmed for a sensing fiber with two 10 μm cladding wires. The successful demonstration of a magnetic field sensing fiber with Metglas® cladding wires fabricated via traditional draw processes sets the stage for distributed measurements and joint inversion as a compliment to distributed fiber optic acoustic sensors.

Dejneka, Zach (ORCID:0000000179415708)↗

Cyclic furnace oxidation of clad WI-52 systems at 1040 C and 1090 C

Cyclic furnace oxidation studies were conducted on the cobalt alloy WI-52 clad with Ni-30Cr, Fe-25Cr-4A1, and Ni-20Cr-4A1 foils (0.051 to 0.254 mm thick). Tests as long as 400 hours using 1- and 20-hour cycles showed that the Ni-Cr- and Fe-Cr-A1 claddings were about equally protective at both temperatures. The protective ability of these alloys was influenced by exposure temperature and cladding thickness. At both temperatures, they protected WI-52 about as well as, or better than, a widely used commercial aluminide coating. The Ni-Cr-Al claddings did not protect WI-52 nearly as well. Interdiffusion generally influenced the oxidation behavior of all clad WI-52 systems.

Gedwill, M. A.↗

Oxidation resistant claddings for superalloys.

The oxidation protection afforded IN-100 and WI-52 superalloys by thin claddings of NiCrAlSi and FeCrAlY alloys was examined primarily at 1090 C. Comparisons were made with commercial aluminide coatings using cyclic furnace and high velocity burner rig tests. In furnace tests, NiCrAlSi on IN-100 and FeCrAlY on WI-52 performed as well or better than two aluminide coatings. Burner rig performance of the FeCrAlY cladding was better than that of the NiCrAlSi cladding on IN-100 and the aluminide coating on WI-52, but less than the aluminide coating on IN-100. An aluminized NiCrAlSi cladding performed better than any coating or cladding.

Gedwill, M. A.↗

Oxidation resistant claddings for superalloys.

The oxidation protection afforded IN-100 and WI-52 superalloys by thin claddings of NiCrAlSi and FeCrAlY alloys was examined primarily at 1090 C. Comparisons were made with commercial aluminide coatings, using cyclic furnace and high-velocity burner rig tests. In furnace tests, NiCrAlSi on IN-100 and FeCrAlY on WI-52 performed as well as or better than two aluminide coatings. Burner rig performance of the FeCrAlY cladding was better than that of the NiCrAlSi cladding on IN-100 and the aluminide coating on WI-52, but less than the aluminide coating on IN-100. An aluminized NiCrAlSi cladding performed better than any coating or cladding.

Gedwill, M. A.↗