Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect of 60 Co γ-radiation on the tetrafluoroethylene/perfluoro(methyl vinyl ether) copolymer

The chemical and paramagnetic composition of the surface of the tetrafluoroethylene / perfluoro(methyl vinyl ether) copolymer (MFA) was investigated before and after γ-irradiation. The content of fluorine and carbon decreases at radiolysis of MFA, as well as the proportion of oxygen increases as a result of the oxidation reaction of radicals formed during γ-irradiation. The electron paramagnetic resonance (EPR) spectrum of the copolymer irradiated at 77 K contains the radicals ~CF 2 C∙FCF 2 ~ (1) and >CFOC∙F 2 (2). The absence of ~CF 2 C∙F 2 radicals, which can be formed at radiolytic rupture of the C—C bond of the copolymer main chain is associated with the effect of recombination of the resulting radical pair. The EPR spectrum of irradiated MFA at 300 K only recorded radical (1), which transform into peroxide radicals when air oxygen is introduced into the irradiated sample. Thermomechanical curves of native and radiolyzed MFA show three structural states of the amorphous block (glass, transition region, plateau of highly elastic deformation), as well as melting and molecular flow of the copolymer. The radio thermoluminescence curve shows five maxima associated with the emission of light during the recombination of stabilized ions and radicals during heating of the pre-irradiated MFA at 77 K. The temperature of the luminescence peak maximum at 336 K is close to the temperature of the onset of the devitrification of the chains of the amorphous block of MFA on the thermomechanical curve at 341 K. Irradiation leads to an increase in crystallinity of MFA. The heat of fusion of irradiated MFA on the Differential Scanning Calorimeter (DSC) curve is 50 % higher than the fusion heat of native copolymer. During the heating of γ-irradiated MFA, the relative content of COF molecules in the thermal decomposition products increases by an order of magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Radiative transition probabilities of neutral and singly ionized rare earth elements (La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) estimated by laser-induced breakdown spectroscopy

Rare earth elements (REEs) are essential to society given their prevalence in many modern technologies. Quantitative elemental analysis of REEs is therefore a critical capability. Calibration free–laser-induced breakdown spectroscopy (CF-LIBS) is a rapidly maturing and promising approach to quantitative elemental analysis with many attractive qualities. The application of CF-LIBS to analyzing samples containing the REEs is hindered by a lack of fundamental data, specifically transition probabilities (TPs). As such, this study seeks to help address this knowledge deficiency by reporting 967 previously unreported TPs for 13 REEs (lanthanum, cerium, praseodymium, neodymium, samarium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium). The method developed in this study to estimate the TPs requires small amounts of material (a few nanograms) compared with other approaches (~ milligrams), uses non-specialized equipment, and does not involve complicated sample preparations.

(LIBS)↗
DOE OSTI2023

Modeling the interfacial failure and resulting mechanical properties of z-pinned additively manufactured composites

The mechanical properties of Fused Filament Fabrication (FFF) parts are limited in the build direction, albeit advantages such as design flexibility and in-house customization. Here, in this paper, a novel z-pinning approach that enhances mechanical properties in the build direction by depositing material across multiple layers within the part was investigated through numerical simulations and validated experimentally. A finite element model for z-pinned composite structures was developed by assigning fiber-orientation dependent material properties obtained using a micromechanics approach to beads and pins. The bead-to-bead and pin-to-pin adhesions within the z-pinned structures were modeled using a cohesive traction separation law. The properties of cohesive elements for carbon fiber-reinforced polylactic acid (CF-PLA) z-pinned composites were calibrated using tensile experiments. The elastic modulus and tensile strength of CF-PLA z-pinned composites in the build direction were predicted with the developed numerical model. The numerical investigation on various geometrical parameters revealed that the largest pin volume increases the stiffness and tensile strength by 40% and thus, has the greatest influence on the mechanical properties of the z-pinned composites. The effect of z-pin geometrical parameters on the mechanical properties was summarized to aid in the design of z-pinned additively manufactured composite structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development of multifunctional nylon 6,6-based nanocomposites with high electrical and thermal conductivities by scalable melt and dry blending methods for automotive applications

With the advent of intelligent automobile technology, the demand for multifunctional composites with higher electrical and thermal conductivities is increasing. We have herein reported for the first time the effect of polyolester on the dispersion of carbon nanotube (CNT) in the short-carbon fiber (CF)/nylon 6,6 (PA66) composite using a scalable melt-mixing and dry-blending method and its subsequent improvement in electrical and thermal conductivities. Masterbatches were prepared with a higher concentration of CNT (both untreated and polyolester-treated) followed by dry blended with reference composite (30 wt% CF and 10 wt% mineral fiber filled PA66) before making coupons via injection molding. A 500% and 63% improvements in electrical (3.14 S cm -1 ) and thermal conductivities (in-plane) (1.99 W m -1 K -1 ) conductivities were observed by adding 1.5 wt% treated CNT compared to the reference composite. The improvements were even higher than that of untreated CNT due to better dispersion. Furthermore, the electromagnetic shielding effectiveness reached 61 dB for 1.5 wt% treated CNT-filled composite (39% enhancement). In conclusion, these results are significant in imparting multiple functionalities to the automotive composite parts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Event-by-event neutron–photon multiplicity correlations in 252Cf(sf)

Excited nuclear fragments are emitted during nuclear fission. The de-excitation of these fission fragments takes place as sequential emission of neutrons followed by photons. A correlation between neutron and photon multiplicities accompanying fission is thus expected. Fission event generators based on established statistical nuclear physics models predict a negative event-by-event correlation in neutron-photon multiplicity. A survey of published experimental results of an event-by-event covariance between the neutron - photon multiplicities emitted following the spontaneous fission of 252 Cf is presented. Analytic unfolding expressions are developed in this work to determine the bias introduced by background sources, particle misclassification, pulse pileup, and inelastic photon production. The published experimental data are re-analyzed using these unfolding techniques and are found to be in qualitative agreement with the predictions of model-based calculations. Finally, in particular, we have concluded that there exists a significant event-by-event neutron-photon emission competition following the spontaneous fission of 252 Cf.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

A compact neutron spectrometer system

A portable neutron spectrometer, nSpec, has been developed for passive interrogation of fast neutrons ( 1 MeV) from neutron sources. The design of the system includes four EJ-301 liquid scintillation cells, a custom stand, and tungsten caps for gamma-ray shielding. Data acquisition settings were optimized to provide a dynamic range of up to > 15 MeV neutron energy. Additionally, the detector response matrix was characterized using a time-of-flight method based on gamma-ray tagged neutron emission from 252 Cf. The spectrum unfolding was characterized using measured and simulated spectra of AmBe and 252 Cf with the GRAVEL and MLEM methods. Monte Carlo methods were used to examine the uncertainty propagation and determine sufficient counts for a measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Absolute mass calibration of fission product distributions measured with the E-$v$ method

The mass calibration of fission product distributions measured with the energy–velocity (E-v) method constitutes a technical challenge. The energy loss of the fission fragments in the various dead layers of the spectrometer and other sources of pulse-height defects of the energy detectors are a significant source of systematic uncertainty in the mass calculations used to determine the measured fission product yields. Here, in this study, the absolute calibration of the fission mass distributions is accomplished by measuring prompt γ-rays in coincidence with the fission fragments. This allows for the direct calibration of the mass spectra and eliminates any dependence on potentially complicated energy corrections. The first test measurement was performed at the Los Alamos Neutron Science Center employing the SPectrometer for Ion DEtermination in fission Research (SPIDER). SPIDER is a 2E-2v spectrometer designed for measuring independent fission product yields from neutron-induced fission. In this test, the single-arm SPIDER (E-v) system and an array of 252 Cf sources were used. The single-arm system consisted of two time pick-off detectors for measuring the time-of-flight of the fission fragments and a double-sided silicon strip detector (DSSD) for measuring the kinetic energy. Characteristic γ-rays from fission fragments were detected using three high-purity germanium (HPGe) detectors. For the mass calibration, γ–mass coincidence events from twelve product isotopes were used. The measured FPYs from 252 Cf spontaneous fission were found to be in excellent agreement with the evaluated data after applying the absolute mass calibration. From the γ–mass coincidence events, the mass resolution of the system was also extracted. An average mass resolution of ~1.4 AMU (FWHM) for the light fragments and ~2.4 AMU (FWHM) for the heavy fragments were found. This was the first in-situ calibration and characterization of the SPIDER spectrometer, which paves the way for high-quality FPY measurements with this instrument.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Dual particle imaging using time-of-flight neutron classification

Fast-neutron imaging technology is well-suited for passive nuclear material monitoring, secondary inspection of flagged cargo, and wide-area search for lost neutron sources. However, imaging systems that use pulse shape discrimination for event classification require complex pulse waveform analysis. In this work, we evaluate time-of-flight (TOF) based particle classification as an alternative solution for fast-neutron imaging by classifying all events with a TOF above a maximum threshold as neutrons. We measured a Cf-252 source next to Cs-137 using a 12-bar organic-glass scintillator array. By varying the TOF thresholds for neutron identification, we demonstrate a clear trade-off between event yield and backprojection image fidelity, with stricter thresholds improving precision at the cost of statistics, TOF thresholded data generated an image that predicted the neutron source direction with 20% reduced mean central angle prediction error compared to a traditional pulse shape discrimination (PSD) method with comparable event count. Time-of-flight particle classification shows promise as an alternative to pulse shape discrimination systems for fast neutron imaging systems looking to minimize costs and size of electronics with comparable imaging quality. The sources used demonstrate that the method is effective in classifying measured neutrons in a measurement environment with 150 μCi Cs-137 and 1.6 × 10 6 n/s Cf-252 sources positioned at distances of 66 cm and 81 cm from the detector. Additionally, the method classifies low-energy neutron events that pulse shape discrimination removes, so a combination of both methods would result in a higher overall neutron event efficiency.

Heriot, William [Univ. of Michigan, Ann Arbor, MI ↗
DOE OSTI2022

Bay capping via acetylene addition to polycyclic aromatic hydrocarbons: Mechanism and kinetics

The bay-capping mechanism on PAH armchair edges and the kinetics of acetylene addition to 6–6–5 and 5–6–5 bays have been explored by ab initio/RRKM-ME calculations. The bays on the edges were modeled by C 21 H 11 and C 20 H 9 radicals produced by H abstractions from 7H-benzo[c]cyclopenta[e]pyrene and dicyclopenta[cf]pyrene. The C 20 H 9 + C 2 H 2 reaction is shown to have a low entrance barrier and to rapidly form the capped product, indaceno[2,1,8,7-cdefg]pyrene, along with ethynyl substituted dicyclopenta[cf]pyrene at temperatures above 1400 K. The reactivity of C 21 H 11 is shown to be governed by the location of the unpaired electron; the π radical R1 formed by H abstraction from the CH 2 group in 7H-benzo[c]cyclopenta[e]pyrene reacts with C 2 H 2 very slowly owing to a high entrance barrier, with the bay-capping rate constant approaching 10 -16 cm 3 molecule -1 s -1 only at temperatures above 2000K. Further, this result reaffirms that the growth of π aryl radicals via acetylene addition is inefficient and reflects the generally low reactivity of such radicals where the spin density is highly delocalized over the entire polyaromatic system. Alternatively, the σ C 21 H 11 radical R2 produced by H abstraction from the five-membered ring at the bay rapidly reacts with C 2 H 2 forming the bay-capped product, with the rate constant on the order of 10 -12 cm 3 molecule -1 s -1 at T≥1500K. Rate constants for the capping reactions at the 6–6–5 and 5–6–5 bays are compared with those at the 6–0–6, 6–6–6, and 6–5–6 bays. The site-specific bay-capping rate constants have been utilized in kMC simulations of the PAH growth and the results showed measurable differences when the 6–6–5 and 5–6–5 bay-capping reactions are taken into account, including an increase of the growth rate and the formation of closed-shell PAH and a rise of the number of embedded five-membered rings accompanied with a slight decrease of their overall amount.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Determination of energy correction coefficient for neutron albedo dosimeter. Three approaches

To accurately determine dose, albedo TLD dosimeters require application of a neutron energy correction factor (NECF). Here, in this paper, the results from three different methods were used to determine NECFs. In the first method, NECF values were calculated as a ratio of the known “conventional true” dose and the neutron dose reported by albedo dosimeter(s) irradiated on a phantom. The results from this direct method were utilized for verification of two other methods. The second method used a specially designed device called the Neutron Area Monitor (NAM) model 5. The third method of NECF determination was based on the response of a BF 3 tube under different levels of moderation. The results of this work showed that the Navy-developed Neutron Area Monitor (NAM) model 5 measures NECF values correctly when irradiated with 252 Cf (bare and D 2 O-moderated). This was an important result, because it validated the use of the NAM-5 in nuclear power and marine propulsion reactors, as their neutron energy spectrum is approximated by the field of a Cadmium-coated 30 cm diameter steel sphere of D 2 O moderated 252 Cf. In the case of a broad neutron energy spectrum the 6 Li response to the small amount of slow neutrons outweighs its response to the fast neutrons overwhelmingly responsible for the neutron dose rate. Based on the obtained results we can conclude that NAM-5 provides correct NECF determination if the fraction of slow neutrons in the neutron dose rate is more than 20%. A satisfactory correlation between the NECF determined by NAM-5 and the multi-moderated BF3 tube method was observed, but the multi-moderated BF 3 tube values were ~30% lower than those obtained by the NAM-5 at the same locations for broader neutron energy spectrum locations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

California's harvested wood products: A time-dependent assessment of life cycle greenhouse gas emissions

Following life-cycle assessment (LCA) methodology, this study presents a state-level estimation of embodied carbon of wood products harvested in 2019 from California and subsequently processed, manufactured, transported, used, and disposed at the end-of-life (EoL). In a conventional static approach to LCA, all GHG emissions were aggregated and considered to occur at year 0 of the given time horizon (500 years in this study) and used a static characterization factor (CF). In dynamic LCA, GHG emissions occurring in different years were considered, and their global warming impact (GWI) was determined using a time-dependent CF over the selected time horizon of 500 years. Four scenarios were developed to examine the impact of EoL choices on GWI. It was found that dynamic GWI for all scenarios ranged from 0.27 to 0.93 million tonne CO₂e, which were 45–73 % lower than those estimated with static LCA approach, indicating that the static LCA approach could lead to an underestimation of the benefits of substituting wood for non-wood products, compared to those based on dynamic LCA approach. This analysis also demonstrated that the choice of EoL treatment option is a key factor affecting the estimated GWI as it directly determines the annual emission of GHGs released into atmosphere and subsequently their warming effect depending on the time harvested wood products (HWPs) spend in the horizon of assessment. Altogether, the dynamic LCA performed in this study enabled more robust interpretations of embodied carbon by including temporal boundaries associated with the HWPs life cycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Mixtures of CO 2 and poly(fluoroacrylate) based on monomers containing only six or four fluorinated carbons: Phase behavior and solution viscosity

In this study, homopolymerization of fluoroacrylate monomers containing a segment with eight fluorinated carbons, (CH 2 CHCOO(CH 2 ) 2 (CF 2 ) 7 CF 3 ), yield poly(fluoroacrylate) (PFA) with remarkably high solubility in CO 2 , but the corresponding ultimate PFA degradation product perfluorooctanoic acid (PFOA) is bio-accumulative. Based on cloud point loci in the 1–4 wt% PFA in CO 2 concentration range at temperatures of 25, 50, 75, 100 and 125°C, it is shown that C 6 F 13 -based and C 4 F 9 -based PFA, with relatively benign degradation products perfluorohexanoic acid (PFHxA) and perfluorobutanoic acid (PFBA), respectively, retain the same level of CO 2 -solubility as that of C 8 F 17 -based PFA. Further, both C 6 F 13 -based and C 4 F 9 -based PFA can increase the viscosity of single-phase CO 2 -PFA solutions (i.e. thicken CO 2 ) as much as C 8 F 17 -based PFA in the 25–125°C range. Therefore, the design of CO 2 -soluble PFA need not be constrained to monomers containing the C 8 F 17 moiety; fluoroacrylate monomers containing shorter fluoroalkyl segments with only four or six fluorocarbons can be utilized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Implications of stop-and-go traffic on training learning-based car-following control

Learning-based car-following control (LCC) of connected and autonomous vehicles (CAVs) is gaining significant attention with the advancement of computing power and data accessibility. While the flexibility and large model capacity of model-free architecture enable LCC to potentially outperform the model-based car-following (CF) model in improving traffic efficiency and mitigating congestion, the generalizability of LCC for traffic conditions different from the training environment/dataset is not well-understood. Herein, this study seeks to explore the impact of stop-and-go traffic in the training dataset on the generalizability of LCC. It uses the characteristics of lead vehicle trajectories to describe stop-and-go traffic, and links the theory of identifiability (i.e., obtaining a unique parameter estimation result using sensor measurements) to the generalizability of behavior cloning (BC) and policy-based deep reinforcement learning (DRL). Correspondingly, the study shows theoretically that: (i) stop-and-go traffic can enable the property of identifiability and enhance the control performance of BC-based LCC in different traffic conditions; (ii) stop-and-go traffic is not necessary for DRL-based LCC to generalize to different traffic conditions; (iii) DRL-based LCC trained with only constant-speed lead vehicle trajectories (not sufficient to ensure identifiability) can be generalized to different traffic conditions; and (iv) stop-and-go traffic increases variance in the training dataset, which improves the convergence of parameter estimation while negatively impacting the convergence of DRL to the optimal control policy. Numerical experiments validate the above findings, illustrating that BC-based LCC entails comprehensive training datasets for generalizing to different traffic conditions, while DRL-based LCC can achieve generalization with simple free-flow traffic training environments. This further suggests DRL as a more promising and cost-effective LCC approach to reduce operational costs, mitigate traffic congestion, and enhance safety and mobility, which can accelerate the deployment and acceptance of CAVs.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Complexation of Lanthanides and Heavy Actinides with Aqueous Sulfur-Donating Ligands

The separation of trivalent lanthanides and actinides is challenging because of their similar sizes and charge densities. S-donating extractants have shown significant selectivity for trivalent actinides over lanthanides, with single-stage americium/ lanthanide separation efficiencies for some thiol-based extractants reported at >99.999%. While such separations could transform the nuclear waste management landscape, these systems are often limited by the hydrolytic and radiolytic stability of the extractant. Progress away from thiol-based systems is limited by the poorly understood and complex interactions of these extractants in organic phases, where molecular aggregation and micelle formation obfuscates assessment of the metal–extractant coordination environment. Because S-donating thioethers are generally more resistant to hydrolysis and oxidation and the aqueous phase coordination chemistry is anticipated to lack complications brought on by micelle formation, we have considered three thioethers, 2,2'-thiodiacetic acid (TDA), (2R,5S)- tetrahydrothiophene-2,5-dicarboxylic acid, and 2,5-thiophenedicarboxylic acid (TPA), as possible trivalent actinide selective reagents. Formation constants, extended X-ray absorption fine structure spectroscopy, and computational studies were completed for thioether complexes with a variety of trivalent lanthanides and actinides including Nd, Eu, Tb, Am, Cm, Bk, and Cf. TPA was found to have moderately higher selectivity for the actinides because of its ability to bind actinides in a different manner than lanthanides, but the utility of TPA is limited by poor water solubility and high rigidity. While significant competition with water for the metal center limits the efficacy of aqueous-based thioethers for separations, the characterization of these solution-phase, S-containing lanthanide and actinide complexes is the most comprehensively available in the literature to date. Here, this is due to the breadth of lanthanides and actinides considered as well as the techniques deployed and serves as a platform for the further development of Scontaining reagents for actinide separations. Additionally, this paper reports on the first bond lengths for Cf and Bk with a neutral S donor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Small-Molecule Models of Hydrogen-Evolving MX 2 (M = Mo, W; X = S, Se) Bulk Solids: Composition–Activity Relationships

Triangular metal chalcogenide clusters of the form [M 3 Q 7 L 3 ]An (M = Mo or W; Q = S or Se; L = i Bu 2 NCS 2 – , (CF 3 CH 2 ) 2 NCS 2 – , i Bu 2 NCSe 2 – , or i Bu 2 PS 2 – ; An = Cl – or I – ) have been investigated as molecular analogues of layered metal dichalcogenide (MX 2 ) H 2 -evolution catalysts. These clusters have been evaluated for their relative H 2 -evolving ability under a common photolysis protocol implementing [Ru(bpy) 3 ] 2+ as chromophore and Et 3 N as sacrificial electron donor. With M constant as Mo and with constant supporting ligand, clusters with an all-sulfide core enable greater H 2 -TON than clusters with an all-selenide core. A more active catalyst is produced by [Mo 3 S 7 (S 2 CN i Bu 2 ) 3 ] + I – than its W 3 analogue with the same core sulfide composition and supporting dithiocarbamate ligands. Dichalcogenocarbamate ligands provide more active catalysts than dialkyldithiophosphate ligated clusters, and within the dichalcogenocarbamate set, greater H 2 -turnovers correlate with more-electron-donating ligands (i.e., i Bu 2 NCS 2 – > (CF 3 CH 2 ) 2 NCS 2 – > i Bu 2 NCSe 2 – ). Cluster cations with Cl – as counteranion are very similar in activity H 2 -evolving levels to identical clusters with I – , ruling out any significant interfering effect by I – upon the electron transfer relay between Et 3 N and catalyst. In the aggregate, observations are consistent with a mechanism for H 2 evolution that involves reductive extrusion of H 2 from a metal hydride intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantifying the Lewis Acidity of Mono-, Di-, and Trivalent Cations in Anhydrous Bis(trifluoromethylsulfonyl)imide Salts

While the bis(trifluoromethylsulfonyl)imide anion (TFSI – ; formula [N(SO 2 CF 3 ) 2 ] – ) has been noted for its practical utility, the use of TFSI – salts as sources of Lewis acidic metal cations for studies of cation-driven tuning effects has not been reported. Here, the effective Lewis acidity of mono-, di-, and trivalent cations (namely, K + , Na + , Li + , Ba 2+ , Ca 2+ , Mg 2+ , Zn 2+ , La 3+ , Y 3+ , Lu 3+ , and Sc 3+ ) in the form of their TFSI – salts is described, along with quantitative comparisons to salts of several other weakly coordinating anions (namely, SO 3 CF 3 – , PF 6 – , and BArF 24 – ). Triphenylphosphine oxide (TPPO) was used as a 31 P NMR probe in titration experiments for quantification of key parameters describing the effective Lewis acidity of the salts in acetonitrile (CH 3 CN) solutions. Notably, the TFSI – salts of di- and trivalent cations were found to display strong binding to TPPO with significant speciation and were found to be quite hygroscopic. Taken together, the measurements demonstrate that TFSI – salts are systematically better/stronger effective Lewis acids than their triflate analogues. And, considering the excellent solubility of TFSI – salts, these materials appear attractive for further use and development in Lewis-acidity-dependent applications, including catalysis and tuning of multimetallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Prediction of Redox Potentials for the Late Actinides Cm to Lr Using Electronic Structure Methods

Our previously developed computational method for calculating the aqueous redox potentials of the early actinides has been extended to the later elements in the actinide series: Cm, Bk, Cf, Es, Fm, Md, No, and Lr in multiple oxidation states. These calculations were performed using density functional theory with small-core pseudopotentials and their associated basis sets. Solvation effects were considered via a supermolecule-continuum approach, with 30 water molecules representing two solvation shells. Both the COSMO and SMD implicit solvation models were utilized. The structural parameters and hydration numbers for Cm(III), Bk(III), Bk(IV), and Cf(III) are in reasonable agreement with the available experimental data. For redox processes involving atomic cations in solution, the B3LYP/COSMO approach predicted redox potentials to within ±0.2 V of experiment for most redox couples, consistent with our prior work. Inclusion of spin-orbit corrections in specific redox pairs, especially those with the later actinides in high oxidation states, yields improved results relative to calculations including only scalar-relativistic corrections. The An +m /An(0) redox potentials were calculated using a Born-Haber cycle incorporating sublimation, ionization, and hydration energies. Due to a lack of experimental data, three sets of ionization energies were used for the Born-Haber cycle. The calculated An(III/0) potentials showed better agreement with experimental data when using the COSMO solvation model and the test set comprising the NIST recommended ionization energies. Furthermore, the Md(II/0) potential was better described with the SMD model, whereas No(II/0) was not well described by all methods. Finally, the computational approach was able to predict redox potentials that for most cases agreed with the current available experimental or estimated data.

Actinides↗
DOE OSTI2025

A Change in C–H Activation Mechanism: Experimental and Computational Investigations of Rh-Catalyzed Disubstituted Benzene Functionalization

We report the ethenylation of 1,3- and 1,2-disubstituted benzenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OAc)] 2 as a catalyst precursor and Cu(OPiv) 2 as the oxidant. The regioselectivity of alkenylation for 1,3-disubstituted benzenes produces 3,5-disubstituted styrene products, while the alkenylation of 1,2-disubstituted benzenes produces 3,4- disubstituted styrene products. The rate of alkenylation is influenced by steric and electronic factors based on the substituents of the benzene unit. In all cases, 1,2-disubstituted benzenes react faster than 1,3-disubstituted benzenes, with a rate difference that is from 2 times up to >70 times more rapid for 1,2-disubstituted substrates. This is likely due to the difference in the number of accessible C−H bonds based on the steric protection of C−H bonds adjacent to functionality. Furthermore, the rate of alkenylation is influenced by the arene substituent electronics. The rates of alkenylation for 1,2-disubstituted benzenes follow the trend OMe > Me > CF 3 > Cl, while for 1,3-disubstituted benzenes the trend is CF 3 > Cl > Me > OMe. Using quantum mechanics DFT calculations, we found that the C−H activation step can occur by two different mechanisms. The electronic properties of substituents on the arene ring change the preferred C−H bond-breaking mechanism for 1,2-disubstituted and 1,3-disubstituted benzenes.

Aromatic compounds↗