Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Improvement of mechanistic fuel-cladding chemical interaction modeling in BISON

This report describes work performed during FY2024 under the auspices of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to inform and improve mechanistic models of fuel-cladding chemical interaction (FCCI) in metallic fuel. For fuel-side FCCI, atomistic simulations were performed to determine the diffusivity of iron (Fe) in the $\alpha$ and $\gamma$ phases of uranium (U). A model of liquid penetration of cladding due to melting of the fuel-side FCCI region was updated to account for the finite size of the FCCI region, and the model was validated through comparison with tests performed in the Fuel Behavior Test Apparatus (FBTA). For cladding wastage formation, a reduced-order model was improved by comparison with a multi-scale mechanistic model to better quantify the ROM parameters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Fully-Coupled Metallic Fuel Performance Simulations using BISON

This document is a set of slides intended to accompany a talk at a meeting. The first topic taken up is zirconium redistribution. The rod edge Zr increase is evidently due to the Soret term and temperature gradient. Then metallic fission gas release modeling is considered. Based on a GRSIS/FEAST model, the approach of generating fission gas in the fuel matrix is described. A sensitivity study on parameters is presented, including sodium bond & diffusion coefficient sensitivity along with dt sensitivity. Finally, results of some coupled simulations are shown, with ideas about future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2017

Development of a Clad Activation Capability in BISON using ORIGEN

This work describes the ongoing coupling work establishing ORIGEN as a physics module for depletion, activation, and decay in the MOOSE/BISON fuel performance code. The current phase has focused on the implementation of an activation model, mainly intended for evaluation and comparison of accident tolerant cladding designs within a single fuel performance framework. The next phase will develop a capability for fuel depletion. New aspects of this work include: investigation of how to allow the high-fidelity ORIGEN capability to be interoperable extension of existing lower-fidelity cladding models (e.g. based only on fast fluence), introduction of recalculation thresholds to reduce computational cost during multi-physics iterations, and runtime experiments to assess the cost of this additional physics relative to the baseline MOOSE/BISON fuel performance calculations. The current results show activation increases runtime by a factor of approximately 7, but additional optimizations, discussed in the conclusions, are possible.

Wieselquist, William↗
DOE OSTI2013

Results from tight and loose coupled multiphysics in nuclear fuels performance simulations using BISON

The behavior of nuclear fuel in the reactor environment is affected by multiple physics, most notably heat conduction and solid mechanics, which can have a strong influence on each other. To provide credible solutions, a fuel performance simulation code must have the ability to obtain solutions for each of the physics, including coupling between them. Solution strategies for solving systems of coupled equations can be categorized as loosely-coupled, where the individual physics are solved separately, keeping the solutions for the other physics fixed at each iteration, or tightly coupled, where the nonlinear solver simultaneously drives down the residual for each physics, taking into account the coupling between the physics in each nonlinear iteration. In this paper, we compare the performance of loosely and tightly coupled solution algorithms for thermomechanical problems involving coupled thermal and mechanical contact, which is a primary source of interdependence between thermal and mechanical solutions in fuel performance models. The results indicate that loosely-coupled simulations require significantly more nonlinear iterations, and may lead to convergence trouble when the thermal conductivity of the gap is too small. We also apply the tightly coupled solution strategy to a nuclear fuel simulation of an experiment in a test reactor. Studying the results from these simulations indicates that perhaps convergence for either approach may be problem dependent, i.e., there may be problems for which a loose coupled approach converges, where tightly coupled won't converge and vice versa. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

25-Pin metallic fuel performance benchmark case based on the EBR-II X430 experiments series

A metallic fuel benchmark case was developed for the fuel performance code BISON based on 25 uranium-zirconium and uranium-plutonium-zirconium pins of the Experimental Breeder Reactor II X430 experiment series. Results of the benchmarks were compared with measurements and calculations made at the time of the experiment as well as subsequent measurements reported in 2019. The comparisons were used to quantify the accuracy of the BISON predictions and to identify patterns in the BISON differences.BISON predicted burnup, plenum pressure, and fission gas release fractions accurately. BISON temperature predictions were somewhat cooler than the temperatures determined at the time of the experiment but appeared to be reasonably accurate considering uncertainties in the legacy temperature calculations, uncertainties in the legacy linear heat rate calculations, and the high sensitivities of the BISON-predicted temperatures to BISON inputs. Fuel axial elongation predictions had errors correlated to fuel composition; BISON tended to underpredict the elongation of binary fuels and overpredict the elongation of ternary fuels. BISON cladding radial dilation predictions were also significantly lower than legacy PIE measurements.Recommendations were made to improve the BISON fuel gaseous swelling model to account for fuel composition, to add additional capabilities to the coolant channel temperature model to ease benchmark development, and to continue developing benchmark cases based on a wide range of experiments in several reactors. Once a wide array of benchmarks is developed, an attempt can be made to enhance or calibrate BISON models to improve the cladding dilation predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Assessment of the Analysis Capability for Core-wide PWR Pellet-Clad Interaction (PCI) Screening

The Level 1 Milestone, L1:CASL.P13.03, “Assess the analysis capability for core-wide PWR Pellet-Clad Interaction (PCI) screening and demonstrate detailed 3-D analysis on selected sub-region.”, has been completed by the Fuels, Materials and Chemistry and Physics Integration focus areas of CASL. This report illustrates the application of VERA simulation to PWR core-wide PCI screening, with emphasis on the multi-dimensional analysis capabilities of BISON fuel performance code. The VERA codes utilized in this effort are: the fuel performance code BISON and the VERA-CS sub-element, which combines the neutron transport code MPACT and the thermal-hydraulics code COBRA-TF (CTF). The target reactor for this work is Watts Bar Unit 1, Cycles 6 and 7, selected on the basis that PCI failures had occurred during power start-up in both cycles, despite the moderate power levels, which offered an interesting test of the code’s veracity and a particularly challenging condition for this Milestone’s assessment. The analysis began by performing BISON-IN-VERA, i.e. VERA-CS + BISON, quarter-core depletion calculations, from which limiting assemblies and limiting fuel rods were selected using a four-parameter selection criterion: high power, high temperature, small gap thickness and high cladding hoop stress. The cladding material being Westinghouse Zirlo, the analysis utilized a new material model developed for this cladding by CASL’s FMC team using open literature sources. The VERA-CS + BISON analysis resulted in identifying 51 limiting rods as candidates for more detailed PCI analysis using stand-alone BISON, employing local 2D and 3D geometric models. This local-effects BISON analysis provided detailed PCI failure assessment, considering the impact of power histories on the two potential sources of PCI failure: the classical SCC-PCI and the missing pellet surface geometry MPS-PCI. The 51-rod analyses of Watts Bar Unit 1 cycle 6 and 7 revealed that the classical SCC-PCI stress levels were well below the failure threshold determined in a previous CASL study, which implicated the other mode of failure, namely MPS-PCI. Considering MPS defects to be the root cause for the failure, the local-effects calculations was repeated using MPS defect sizes equal to and larger than Westinghouse quality assurance standards. Initial results of this new analysis showed a significant increase in the cladding stress, indicating that an MPS may have been present in cycle 6 and 7 for the failure to occur. In order to determine the size of MPS needed for cycle 6 and 7 rods to fail, a sensitivity study using 2-D and 3-D models was performed. The results showed cladding hoop stresses, while remaining below the failure level for an MPS of equal size to the acceptance standard, continued to increase as the size of the MPS increased. This report has demonstrated the use of BISON, in consort with VERA’s simulation methodology, for core-wide PCI failure screening capability. Utilizing this demonstration, and emulating the PCI margin analysis methodology developed in the EPRI PCI guidelines, BISON-IN-VERA simulation can be used very effectively to develop core power histories to minimize PCI failure potential.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗