Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BORANES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Complex Hydride Compounds with Enhanced Hydrogen Storage Capacity

The United Technologies Research Center (UTRC), in collaboration with major partners Albemarle Corporation (Albemarle) and the Savannah River National Laboratory (SRNL), conducted research to discover new hydride materials for the storage of hydrogen having on-board reversibility and a target gravimetric capacity of ≥ 7.5 weight percent (wt %). When integrated into a system with a reasonable efficiency of 60% (mass of hydride / total mass), this target material would produce a system gravimetric capacity of ≥ 4.5 wt %, consistent with the DOE 2007 target. The approach established for the project combined first principles modeling (FPM - UTRC) with multiple synthesis methods: Solid State Processing (SSP - UTRC), Solution Based Processing (SBP - Albemarle) and Molten State Processing (MSP - SRNL). In the search for novel compounds, each of these methods has advantages and disadvantages; by combining them, the potential for success was increased. During the project, UTRC refined its FPM framework which includes ground state (0 Kelvin) structural determinations, elevated temperature thermodynamic predictions and thermodynamic / phase diagram calculations. This modeling was used both to precede synthesis in a virtual search for new compounds and after initial synthesis to examine reaction details and options for modifications including co-reactant additions. The SSP synthesis method involved high energy ball milling which was simple, efficient for small batches and has proven effective for other storage material compositions. The SBP method produced very homogeneous chemical reactions, some of which cannot be performed via solid state routes, and would be the preferred approach for large scale production. The MSP technique is similar to the SSP method, but involves higher temperature and hydrogen pressure conditions to achieve greater species mobility. During the initial phases of the project, the focus was on higher order alanate complexes in the phase space between alkaline metal hydrides (AmH), Alkaline earth metal hydrides (AeH2), alane (AlH3), transition metal (Tm) hydrides (TmHz, where z=1-3) and molecular hydrogen (H2). The effort started first with variations of known alanates and subsequently extended the search to unknown compounds. In this stage, the FPM techniques were developed and validated on known alanate materials such as NaAlH4 and Na2LiAlH6. The coupled predictive methodologies were used to survey over 200 proposed phases in six quaternary spaces, formed from various combinations of Na, Li Mg and/or Ti with Al and H. A wide range of alanate compounds was examined using SSP having additions of Ti, Cr, Co, Ni and Fe. A number of compositions and reaction paths were identified having H weight fractions up to 5.6 wt %, but none meeting the 7.5 wt%H reversible goal. Similarly, MSP of alanates produced a number of interesting compounds and general conclusions regarding reaction behavior of mixtures during processing, but no alanate based candidates meeting the 7.5 wt% goal. A novel alanate, LiMg(AlH4)3, was synthesized using SBP that demonstrated a 7.0 wt% capacity with a desorption temperature of 150°C. The deuteride form was synthesized and characterized by the Institute for Energy (IFE) in Norway to determine its crystalline structure for related FPM studies. However, the reaction exhibited exothermicity and therefore was not reversible under acceptable hydrogen gas pressures for on-board recharging. After the extensive studies of alanates, the material class of emphasis was shifted to borohydrides. Through SBP, several ligand-stabilized Mg(BH4)2 complexes were synthesized. The Mg(BH4)2*2NH3 complex was found to change behavior with slightly different synthesis conditions and/or aging. One of the two mechanisms was an amine-borane (NH3BH3) like dissociation reaction which released up to 16 wt %H and more conservatively 9 wt%H when not including H2 released from the NH3. From FPM, the stability of the Mg(BH4)2*2NH3 compound was found to increase with the inclusion of NH3 groups in the inner-Mg coordination sphere, which in turn correlated with lowering the dimensionality of the Mg(BH4)2 network. Development of various Ak Tm-B-H compounds using SSP produced up to 12 wt% of H2 desorbed at temperatures of 400°C. However, the most active material can only be partially recharged to 2 wt% H2 at 220-300°C and 195 bar H2 pressure due to stable product formation. While gravimetric & volumetric targets are feasible, reversibility remains a persistent challenge.

08 HYDROGEN↗

Ultrathin Boron Growth onto Nanodiamond Surfaces via Electrophilic Boron Precursors

Diamond as a templating substrate is largely unexplored, and the unique properties of diamond, including its large bandgap, thermal conductance, and lack of cytotoxicity, makes it versatile in emergent technologies in medicine and quantum sensing. Surface termination of an inert diamond substrate and its chemical reactivity are key in generating new bonds for nucleation and growth of an overlayer material. Oxidized high-pressure high temperature (HPHT) nanodiamonds (NDs) are largely terminated by alcohols that act as nucleophiles to initiate covalent bond formation when an electrophilic reactant is available. In this work, we demonstrate a templated synthesis of ultrathin boron on ND surfaces using trigonal boron compounds. Boron trichloride (BCl 3 ), boron tribromide (BBr 3 ), and borane (BH 3 ) were found to react with ND substrates at room temperature in inert conditions. BBr 3 and BCl 3 were highly reactive with the diamond surface, and sheet-like structures were produced and verified with electron microscopy. Surface-sensitive spectroscopies were used to probe the molecular and atomic structure of the ND constructs’ surface, and quantification showed the boron shell was less than 1 nm thick after 1–24 h reactions. Observation of the reaction supports a self-terminating mechanism, similar to atomic layer deposition growth, and is likely due to the quenching of alcohols on the diamond surface. X-ray absorption spectroscopy revealed that boron-termination generated midgap electronic states that were originally predicted by density functional theory (DFT) several years ago. DFT also predicted a negative electron surface, which has yet to be confirmed experimentally here. The boron-diamond nanostructures were found to aggregate in dichloromethane and were dispersed in various solvents and characterized with dynamic light scattering for future cell imaging or cancer therapy applications using boron neutron capture therapy (BNCT). The unique templating mechanism based on nucleophilic alcohols and electrophilic trigonal precursors allows for covalent bond formation and will be of interest to researchers using diamond for quantum sensing, additive manufacturing, BNCT, and potentially as an electron emitter.

36 MATERIALS SCIENCE↗

Conceptual study of hypersonic airbreathing missiles

The purpose of this paper is to report recent results of an in-house conceptual study to evaluate the performance potential and research needs of airbreathing hypersonic missiles. An alkylated-borane (noncryogenic) fueled, dual-mode, ramjet/scramjet propulsion system structured with a Rene 41 inlet and a carbon-carbon combustor was assumed along with a Lockalloy heat sink fuselage structure and beryllium wings and control surfaces. Performance for an air-launched baseline missile with a 961 pound staging weight containing a 100 pound payload indicated excellent long range cruise, moderate acceleration and high maneuverability potential. A sizing study indicates that Mach 6 cruise ranges of the order of 2500 nautical miles for payloads of 300 pounds can be achieved with moderate size missile carry weights (9000 lbs.). Aerodynamic heating analyses indicate that unprotected heat-sink structures with internal insulation are feasible for ranges of several hundred miles. For ranges of several thousands of miles a multiwall radiation shield (Inconel/titanium) was selected for protection of the internally insulated heat sink structure.

Hunt, J. L.↗

Evaluation of on-board hydrogen storage methods f or high-speed aircraft

Hydrogen is the fuel of choice for hypersonic vehicles. Its main disadvantage is its low liquid and solid density. This increases the vehicle volume and hence the drag losses during atmospheric flight. In addition, the dry mass of the vehicle is larger due to larger vehicle structure and fuel tankage. Therefore it is very desirable to find a fuel system with smaller fuel storage requirements without deteriorating the vehicle performance substantially. To evaluate various candidate fuel systems, they were first screened thermodynamically with respect to their energy content and cooling capacities. To evaluate the vehicle performance with different fuel systems, a simple computer model is developed to compute the vehicle parameters such as the vehicle volume, dry mass, effective specific impulse, and payload capacity. The results indicate that if the payload capacity (or the gross lift-off mass) is the most important criterion, only slush hydrogen and liquid hydrogen - liquid methane gel shows better performance than the liquid hydrogen vehicle. If all the advantages of a smaller vehicle are considered and a more accurate mass analysis can be performed, other systems using endothermic fuels such as cyclohexane, and some boranes may prove to be worthy of further consideration.

Akyurtlu, Ates↗

The Synthesis and Testing of Highly Strained Cyclic and Polycyclic Molecules as Hypergolic Fuels

Increasing fuel efficiency has been a goal for chemists for several decades. Particularly, a more efficient fuel can increase the range of liquid-hydrocarbon-fueled ram-jets and cruise missiles. A storable high-energy fuel that spontaneously ignites upon addition of an oxidizer is defined as a hypergolic fuel. Hypergolic storable fuels provide an increase in energy per unit volume of fuel and eliminate the need for an external ignition system. Several classes of functionalized hydrocarbons such as amines, boranes, and phosphines are known to be hypergolic with nitric acid oxidizers, but only hydrazine and its simple derivatives5 have been found to exhibit true hypergolic behavior with H2O2. Hydrogen peroxide is a good candidate for an oxidizer due to its reduced toxicity and improved storage capability. Hydrazine-based fuels are expensive, highly corrosive, and toxic, thus providing the need for investigation of other fuels that may be hypergolic with H2O2. Strained hydrocarbons have been studied as high-density fuels. Some examples including benzvalene and cubane, exhibit an increase in heat of combustion as the density of the fuel increases. Many conventional hydrocarbon fuels, such as JP-5 and JP-10, show a decrease in heat of combustion as density of the fuel increases. Strained hydrocarbons can therefore increase the range of the missile by increasing the combustion efficiency per volume of fuel. The goal of this research is to investigate hypergolic behavior of strained hydrocarbons by adding an amine functional group which has been found to hypergolic with nitric acid oxidizers. N,N-Dimethyl-[3]-triangulane-7-methylamine (l), cyclopropylamines (2), cyclobutylamines (3), propylamines (4), and butylamines (5) were synthesized and investigated. The amino group should react with oxygen, providing the initiation step for ring decomposition. The highly exothermic reactions will accumulate energy and potentially lead to spontaneous ignition of the fuel. Triangulanes possess high strain energy, while the less strained cyclopropane and cyclobutanes are more volatile and may show shorter ignition times.

Eccles, Wendy↗

Effects of Nonaqueous Electrolytes on Primary Li-Air Batteries

The effects of nonaqueous electrolytes on the performance of primary Li-air batteries operated in dry air environment have been investigated. Organic solvents with low volatility and low moisture absorption are necessary to minimize the change of electrolyte compositions and the reaction between Li anode and water during the discharge process. The polarity of aprotic solvents outweighs the viscosity, ion conductivity and oxygen solubility on the performance of Li-air batteries once these latter properties attain certain reasonable level, because the solvent polarity significantly affects the number of tri-phase regions formed by oxygen, electrolyte, and active carbons (with catalyst) in the air electrode. The most feasible electrolyte formulation is the system of LiTFSI in PC/EC mixtures, whose performance is relatively insensitive to PC/EC ratio and salt concentration. The quantity of such electrolyte added to a Li-air cell has notably effects on the discharge performance of the Li-air battery as well, and a maximum in capacity is observed as a function of electrolyte amount. The coordination effect from the additives or co-solvents [tris(pentafluorophenyl)borane and crown ethers in this study] also greatly affects the discharge performance of a Li-air battery.

25 ENERGY STORAGE↗

Weak-link capacitor

A process for making a dielectric material where a precursor polymer selected from poly(phenylene vinylene) polyacetylene, poly(p-phenylene), poly(thienylene vinylene), poly(1,4-naphthylene vinylene), and poly(p-pyridine vinylene) is energized said by exposure by radiation or increase in temperature to a level sufficient to eliminate said leaving groups contained within the precursor polymer, thereby transforming the dielectric material into a conductive polymer. The leaving group in the precursor polymer can be a chloride, a bromide, an iodide, a fluoride, an ester, an xanthate, a nitrile, an amine, a nitro group, a carbonate, a dithiocarbamate, a sulfonium group, an oxonium group, an iodonium group, a pyridinium group, an ammonium group, a borate group, a borane group, a sulphinyl group, or a sulfonyl group.

36 MATERIALS SCIENCE↗

A Facile Synthesis of Monodisperse Au Nanoparticles and Their Catalysis of CO Oxidation

Monodisperse Au nanoparticles (NPs) have been synthesized at room temperature via a burst nucleation of Au upon injection of the reducing agent t-butylamine-borane complex into a 1, 2, 3, 4-tetrahydronaphthalene solution of HAuCl{sub 4} {center_dot} 3H{sub 2}O in the presence of oleylamine. The as-synthesized Au NPs show size-dependent surface plasmonic properties between 520 and 530 nm. They adopt an icosahedral shape and are polycrystalline with multiple-twinned structures. When deposited on a graphitized porous carbon support, the NPs are highly active for CO oxidation, showing 100% CO conversion at -45 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Facile Synthesis of Monodisperse Au Nanoparticles and Their Catalysis of CO Oxidation

Monodisperse Au nanoparticles (NPs) have been synthesized at room temperature via a burst nucleation of Au upon injection of the reducing agent t-butylamine-borane complex into a 1, 2, 3, 4-tetrahydronaphthalene solution of HAuCl{sub 4} {center_dot} 3H{sub 2}O in the presence of oleylamine. The as-synthesized Au NPs show size-dependent surface plasmonic properties between 520 and 530 nm. They adopt an icosahedral shape and are polycrystalline with multiple-twinned structures. When deposited on a graphitized porous carbon support, the NPs are highly active for CO oxidation, showing 100% CO conversion at -45 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Weak-link capacitor

A process for making a dielectric material where a precursor polymer selected from poly(phenylene vinylene)polyacetylene, poly(p-phenylene), poly(thienylene vinylene), poly(1,4-naphthylene vinylene), and poly(p-pyridine vinylene) is energized said by exposure by radiation or increase in temperature to a level sufficient to eliminate said leaving groups contained within the precursor polymer, thereby transforming the dielectric material into a conductive polymer. The leaving group in the precursor polymer can be a chloride, a bromide, an iodide, a fluoride, an ester, an xanthate, a nitrile, an amine, a nitro group, a carbonate, a dithiocarbamate, a sulfonium group, an oxonium group, an iodonium group, a pyridinium group, an ammonium group, a borate group, a borane group, a sulphinyl group, or a sulfonyl group.

36 MATERIALS SCIENCE↗

Use of Li.sub.2[B.sub.12H.sub.12] salt to absorb water into polymers

Methods of adjusting the properties of a composition are provided. The compositions comprise a polymer-containing matrix and a filler comprising a hygroscopic salt. Preferred such salts comprise a cage compound selected from the group consisting of borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer.

36 MATERIALS SCIENCE↗

LiF dissolution by anion-binding-agent in LiCF x battery systems: Lower ohmic and interfacial resistance.

In this paper we will discuss our preliminary thermal and electrochemical data aimed at developing a robust nonflammable Li-CFx cell capable of wide temperature operation. To accomplish this goal, we are evaluating a thermally stable solvent comprised of an anion binding agent (ABA) and lithium fluoride (LiF), typically at a 1:1 molar ratio. In conventional carbonate based electrolytes, ABA is soluble while LiF remains insoluble. However, the neutral ABA solubilizes LiF and forms a salt complex represented as Li+(ABAF-). We are exploiting this unique feature and apply this strategy to CFx chemistry to improve cell performance, due to the CFx cell chemistry generating LiF as discharge product. Continuous solvation of the salt mixture during discharge allows for utilization of electrolytes initially containing sub stoichiometric amount of LiF. The practical benefits are reduced cell weight, mitigation of electrode fouling, and consequently better low temperature performance. Electrolytes containing dimethyl methyl phosphonate (DMMP), 1M tris(pentafluorophenyl) borane (TPFB) and varying concentrations of LiF (1M; 0.5M and 0.1M) were prepared and characterized for ionic conductivity and voltage stability. In general, ionic conductivity decreases with decreasing LiF concentration. The room temperature conductivity for the DMMP 1M TPFB:1M LiF is ~ 9mS/cm and ~3mS/cm for the 1M TPFB:0.1M LiF. Unlike the conductivity, the electrochemical voltage stability did not vary substantially with LiF concentration and the electrolytes showed a stable voltage window in the range 0-3.5V vs. Li + /Li, which is substantially wider than the Li-CFx cell voltage. Flammability measurement performed at our thermal abuse facility demonstrated that the electrolyte was nonflammable. Discharge performance of CFx materials obtained from several vendors was evaluated in 2032 coin cells at room temperature. Experimental results demonstrate a reduction in ohmic resistance and interfacial resistance during discharge for a cell containing lower concentrations of added LiF compared to ABA. These observations are a direct demonstration that the unbound ABA in the electrolyte dissolves the LiF generated in the discharge reaction.

25 ENERGY STORAGE↗

Macrocyclic ligands and their complexes for bifunctional molecular catalysis

Disclosed herein are embodiments of chiral and achiral macrocyclic polydentate ligands and methods of preparing the same. Disclosed herein are also embodiments of metal coordination complexes derived from these macrocyclic polydentate ligands and methods of preparing the same. The metal coordination complexes described herein, can be used for a variety of catalytic reactions, including hydrogenation and transfer hydrogenation of unsaturated organic compounds, dehydrogenation of alcohols and boranes, an asymmetric Michael-type addition reaction, or an aerobic oxidative kinetic resolution of an organic compound, dehydrogenative couplings and other catalytic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polydentate ligands and their complexes for molecular catalysis

Embodiments of the present disclosure relate generally to novel achiral and chiral sulfur-, nitrogen- and phosphorus-containing ligands, designated as NNS-type, P(O)NS-type, PNS-type, SNNS-type, SNNP(O)-type, or SNNP-type polydentate ligands and transition metal complexes of these ligands, including iridium complexes having PNS-type and NNS-type ligands. The catalysts derived from these ligands and transition metal complexes may be used in a wide range of catalytic reactions, including hydrogenation and transfer hydrogenation of unsaturated organic compounds, dehydrogenation of alcohols and boranes, various dehydrogenative couplings, chemoselective hydrogenation of α,β-unsaturated alcohols, and other catalytic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Activated magnesium boride materials for hydrogen storage

Some embodiments described herein provide for methods for synthesizing magnesium borohydride from hydrogenation of magnesium boride at moderate temperature and pressure in the presence of a modifier. The modifier may be in form of hydrides, liquid hydrogen carriers, ammonia borane, metallic species, croconate anion based materials, ethers, amines or imines, metal carbides, borides, graphene, arenes, magnesium, aluminum, calcium or ionic liquids. Some embodiments provide for charging magnesium boride in presence of a modifier at high pressure hydrogen while simultaneously heating the material. The modification in some instances may lead to an improved magnesium boride product with enhanced properties for application in other hydrogen storage systems.

Severa, Godwin↗

Photoactive Blend Morphology Engineering through Systematically Tuning Aggregation in All-Polymer Solar Cells

Polymer aggregation plays a critical role in the miscibility of materials and the performance of all-polymer solar cells (APSCs). However, many aspects of how polymer texturing and aggregation affect photoactive blend film microstructure and photovoltaic performance are poorly understood. Here the effects of aggregation in donor–acceptor blends are studied, in which the number-average molecular weights (Mns) of both an amorphous donor polymer, poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)] (PBDTT-FTTE) and a semicrystalline acceptor polymer, poly{[N,N'-bis(2-octyldodecyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)) are systematically varied. The photovoltaic performance is correlated with active layer microstructural and optoelectronic data acquired by in-depth transmission electron microscopy, grazing incidence wide-angle X-ray scattering, thermal analysis, and optical spectroscopic measurements. Coarse-grained modeling provides insight into the effects of polymer aggregation on the blend morphology. Notably, the computed average distance between the donor and the acceptor polymers correlates well with solar cell photovoltaic metrics such as short-circuit current density (Jsc) and represents a useful index for understanding/predicting active layer blend material intermixing trends. Importantly, these results demonstrate that for polymers with different texturing tendencies (amorphous/semicrystalline), the key for optimal APSC performance, photovoltaic blend morphology can be controlled via both donor and acceptor polymer aggregation.

bio-inspired↗

Overview of Systems Considerations for On-Board Chemical Hydrogen Storage

Recent advances in chemical hydrogen storage systems are reviewed. Factors impacting design and implementation of chemical hydrogen storage systems for on-board vehicular use are highlighted. The physical and chemical characteristics of chemical hydrogen fuels and their spent fuel counterparts are considered to provide guidance to future technology developers. Heat management, fuel stability, reactor design, and fuel morphology are examples of issues that must be considered for the future of chemical hydrogen storage systems.

ammonia borane↗