Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BINARY FLUID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

INDUCED ROTATION IN THREE-DIMENSIONAL SIMULATIONS OF CORE-COLLAPSE SUPERNOVAE: IMPLICATIONS FOR PULSAR SPINS

It has been suggested that the observed rotation periods of radio pulsars might be induced by a non-axisymmetric spiral-mode instability in the turbulent region behind the stalled supernova bounce shock, even if the progenitor core was not initially rotating. In this paper, using the three-dimensional Adaptive Mesh Refinement code CASTRO with a realistic progenitor and equation of state and a simple neutrino heating and cooling scheme, we present a numerical study of the evolution in three dimensions of the rotational profile of a supernova core from collapse, through bounce and shock stagnation, to delayed explosion. By the end of our simulation ({approx}420 ms after core bounce), we do not witness significant spin-up of the proto-neutron star core left behind. However, we do see the development before the explosion of strong differential rotation in the turbulent gain region between the core and stalled shock. Shells in this region acquire high spin rates that reach {approx}150 Hz, but this region contains too little mass and angular momentum to translate, even if left behind, into rapid rotation for the full neutron star. We also find that much of the induced angular momentum is likely to be ejected in the explosion, and moreover that even if the optimal amount of induced angular momentum is retained in the core, the resulting spin period is likely to be quite modest. Nevertheless, induced periods of seconds are possible.

79 ASTRONOMY AND ASTROPHYSICS↗

The Binary Alkali Nitrate and Chloride Phase Diagrams: NaNO{sub 3}-KNO{sub 3}, LiNO{sub 3}-NaNO{sub 3}, LiNO{sub 3}-KNO{sub 3}, and NaCl-KCl

LiNO{sub 3}-NaNO{sub 3}, LiNO{sub 3}-KNO{sub 3,} NaNO{sub 3}-KNO{sub 3}, and NaCl-KCl phase relations were formulated using the regular solution model to obtain desired compositions for their potential application as a heat transfer fluid. The simultaneous nonlinear equations formed were solved numerically using a contour plot technique in Matlab. An algorithm was developed to determine the real roots of the coupled nonlinear equations and subsequent phase diagrams were constructed. The phase diagrams were compared with those predicted using FactSage thermochemical package and literature data from experimental studies. The calculated NaNO{sub 3}-KNO{sub 3} phase diagram shows that this system has a eutectic point at 0.5 mole fraction of KNO{sub 3} with a eutectic temperature of 220.85 °C, while the LiNO{sub 3}-KNO{sub 3} system was found to have a eutectic point at 0.44 mole fraction LiNO{sub 3} at 137 °C. The LiNO{sub 3}-NaNO{sub 3} system shows a eutectic at 0.524 mole fraction LiNO{sub 3} at 192.8 °C, and finally the NaCl-KCl system has a eutectic point at 0.48 mole fraction NaCl at 634 °C. The liquidus and solidus curves obtained fitted close against values obtained from the quasi-chemical model used in FactSage and experimental values from the literature. This study showed that the regular solution model combined with the contour plots approach can sufficiently describe the liquidus–solidus curves of the alkali binary nitrate and chloride systems and could be a useful method for predicting the phase diagrams for higher order alkali nitrates and chlorides.

36 MATERIALS SCIENCE↗

Quantitative measurement of binary liquid distributions using multiple-tracer x-ray fluorescence and radiography

The complex geometry and large index-of-refraction gradients that occur near the point of impingement of binary liquid jets present a challenging environment for optical interrogation. A simultaneous quadruple-tracer x-ray fluorescence and line-of-sight radiography technique is proposed as a means of distinguishing and quantifying individual liquid component distributions prior to, during, and after jet impact. Two different pairs of fluorescence tracers are seeded into each liquid stream to maximize their attenuation ratio for reabsorption correction and differentiation of the two fluids during mixing. This approach for instantaneous correction of x-ray fluorescence reabsorption is compared with a more time-intensive approach of using stereographic reconstruction of x-ray attenuation along multiple lines of sight. The proposed methodology addresses the need for a quantitative measurement technique capable of interrogating optically complex, near-field liquid distributions in many mixing systems of practical interest involving two or more liquid streams.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recommended direct simulation Monte Carlo collision model parameters for modeling ionized air transport processes

A systematic approach for calibrating the direct simulation Monte Carlo (DSMC) collision model parameters to achieve consistency in the transport processes is presented. The DSMC collision cross section model parameters are calibrated for high temperature atmospheric conditions by matching the collision integrals from DSMC against ab initio based collision integrals that are currently employed in the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) and Data Parallel Line Relaxation (DPLR) high temperature computational fluid dynamics solvers. The DSMC parameter values are computed for the widely used Variable Hard Sphere (VHS) and the Variable Soft Sphere (VSS) models using the collision-specific pairing approach. The recommended best-fit VHS/VSS parameter values are provided over a temperature range of 1000-20 000 K for a thirteen-species ionized air mixture. Use of the VSS model is necessary to achieve consistency in transport processes of ionized gases. The agreement of the VSS model transport properties with the transport properties as determined by the ab initio collision integral fits was found to be within 6% in the entire temperature range, regardless of the composition of the mixture. The recommended model parameter values can be readily applied to any gas mixture involving binary collisional interactions between the chemical species presented for the specified temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Directional solidification of aqueous TiO 2 suspensions under reduced gravity

Porous materials exhibiting aligned, elongated pore structures can be created by directional solidification of aqueous suspensions—where particles are rejected from a propagating ice front and form interdendritic, particle-packed walls—followed by sublimation of the ice, and sintering of the particle walls. Theoretical models that predict dendritic lamellae spacing—and thus wall and pore width in the final materials—are currently limited due to an inability to account for gravity-driven convective effects during solidification. In this work, aqueous suspensions of 10–30 nm TiO 2 nanoparticles are solidified on parabolic flights under micro-, lunar (~0.17 g; g l = 1.62 m/s 2 ), and Martian (~0.38 g; g m = 3.71 m/s 2 ) gravity and compared to terrestrially-solidified samples. After ice sublimation and sintering, all resulting TiO 2 materials exhibit elongated lamellar pores replicating the ice dendrites. Furthermore, increasing the TiO 2 fraction in the suspensions leads to decreased lamellar spacing in all samples, regardless of gravitational acceleration. Consistent with previous studies of microgravity solidification of binary metallic alloys, lamellar spacing decreases with increasing gravitational acceleration. Furthermore, mean lamellar spacing for 20 wt% TiO 2 nanoparticles suspensions under micro-, lunar, Martian, and terrestrial gravity are, respectively: 50 ± 8, 34 ± 11, 30 ± 6, and 23 ± 9 μm, indicating that gravity-driven convection strongly affects lamellae spacing under terrestrial gravity conditions. Gravitational effects on lamellar spacing are highest at low TiO 2 fractions in the suspension; for 5 wt% TiO 2 suspensions, the microgravity lamellar spacing is more than twice that under terrestrial gravity (182 ± 21 vs. 81 ± 23 μm). Results of this study are in good agreement with previous studies of binary metallic alloy solidification where primary dendrite spacing increases under microgravity. Additionally, literature data from ice-templating systems are used to discuss a dependence on lamellae spacing of the density ratio of particles and fluid.

36 MATERIALS SCIENCE↗

Efficient data-driven models for prediction and optimization of geothermal power plant operations

Increasing the capacity of geothermal energy as a renewable resource calls for development and deployment of efficient control and optimization technologies for geothermal power plants. A data-driven prediction and optimization model is presented as a cost-effective and efficient alternative to physics-based approach. The model predicts power output and operational cost by propagating the influence of control and disturbance variables within an artificial neural network (ANN). Numerical experiments with simulated and field data from a real geothermal power plant are first used to demonstrate the prediction performance of the ANN model. The model is then adopted to maximize the net predicted power production by automatically adjusting the working fluid circulation rate. The optimization performance of the model in evaluated using a thermodynamic flowsheet simulation model. The workflow is applied to model and control the effect of ambient temperature on an air-cooled binary cycle power plant, which is complex and costly to perform using a physics-based predictive model. As a result, the performance of the method is demonstrated by applying it to both simulated and field datasets from a binary cycle geothermal power plant.

15 GEOTHERMAL ENERGY↗

Solvation Phenomena in Dilute Solutions: Formal, Experimental Evidence, and Modeling Implications

We review the fundamentals underlying a general molecular-based formalism for the microscopic interpretation of the solvation phenomena involving sparingly soluble solutes in compressible media, an approach that hinges around the unambiguous splitting of the species correlation function integrals into short-(finite) and long-ranged (diverging) contributions at infinite dilution, where this condition is taken as the reference system for the derivation of composition expansions. Then, we invoke the formalism (a) to illustrate the well-behaved nature of the solvation contributions to the mechanical partial molecular properties of solutes at infinite dilution, (b) to guide the development of, and provide molecular-based support to, the macroscopic modeling of high-temperature dilute aqueous-electrolyte solutions, (c) to study solvation effects on the kinetic rate constants of reactions in near-critical solvents in an attempt to understand from a microscopic perspective the macroscopic evidence regarding the thermodynamic pressure effects, and (d) to interpret the microscopic mechanism behind synergistic solvation effects involving either co-solutes or co-solvents, and provide a molecular argument on the unsuitability of the van der Waals one-fluid (vdW-1f) mixing rules for the 2 description of weakly attractive solutes in compressible solvents. Finally, we develop thermodynamically consistent perturbation expansions, around the infinite dilution reference, for the species residual properties in binary and ternary mixtures, and discuss the theoretical and modeling implications behind ad hoc first-order truncated expansions.

Chialvo, Ariel A↗

Absorption spectra of e-beam-excited Ne, Ar, and Kr, pure and in binary mixtures

A technique using the broadband emission of a laser plume as probe radiation is applied to record UV-visible (190-510 nm) absorption spectra of Ne, Ar, and Kr, pure and in binary mixtures under moderate e-beam excitation up to 1 MW/cm{sup 3}. In all the rare gases and mixtures, the absorption spectra show continuum related to Rg{sub 2}{sup +} homonuclear ions [peaking at {lambda}{approx}285, 295, and 320 nm in Ne, Ar, and Kr(Ar/Kr), respectively] and a number of atomic lines related mainly to Rg*(ms) levels, where m is the lowest principal quantum number of the valence electron. In argon, a continuum related to Ar{sub 2}* ({lambda}{approx}325 nm) is also recorded. There are also trains of narrow bands corresponding to Rg{sub 2}{sup *}(np{pi} {sup 3}{Pi}{sub g})(leftarrow)Rg{sub 2}{sup *}(ms{sigma} {sup 3}{Sigma}{sub u}{sup +}) transitions. All the spectral features mentioned above were reported in literature but have never been observed simultaneously. Although charge transfer to a homonuclear ion of the heavier additive is commonly believed to dominate in binary rare-gas mixtures, it is found in this study that in Ne/Kr mixture, the charge is finally transferred from the buffer gas Ne{sub 2}{sup +} ion not to Kr{sub 2}{sup +} but to heteronuclear NeKr{sup +} ion.

36 MATERIALS SCIENCE↗

THE CHEMISTRY OF POPULATION III SUPERNOVA EJECTA. I. FORMATION OF MOLECULES IN THE EARLY UNIVERSE

We study the formation and destruction of molecules in the ejecta of Population III supernovae (SNe) using a chemical kinetic approach to follow the evolution of molecular abundances from day 100 to day 1000 after explosion. The chemical species included in the study range from simple diatomic molecules to more complex dust precursor species. All relevant molecule formation and destruction processes that are unique to the SN environment are considered. Our work focuses on zero-metallicity progenitors with masses of 20, 170, and 270 M{sub sun}, and we study the effect of different levels of heavy element mixing and the inward diffusion of hydrogen and helium on the ejecta chemistry. We show that the ejecta chemistry does not reach a steady state within the relevant timespan ({approx}3 yr) for molecule formation, thus invalidating previous results relying on this assumption. The primary species formed in the harsh SN environment are O{sub 2}, CO, SiS, and SO. The SiO, formed as early as 200 days after explosion, is rapidly depleted by the formation of silica molecular precursors in the ejecta. The rapid conversion of CO to C{sub 2} and its thermal fractionation at temperatures above 5000 K allow for the formation of carbon chains in the oxygen-rich zone of the unmixed models, providing an important pathway for the formation of carbon dust in hot environments where the C/O ratio is less than 1. We show that the fully mixed ejecta of a 170 M{sub sun} progenitor synthesizes 11.3 M{sub sun} of molecules, whereas 20 M{sub sun} and 270 M{sub sun} progenitors produce 0.78 M{sub sun} and 3.2 M{sub sun} of molecules, respectively. The admixing of 10% of hydrogen into the fully mixed ejecta of the 170 M{sub sun} progenitor increases its molecular yield to {approx}47 M{sub sun}. The unmixed ejecta of a 170 M{sub sun} progenitor SN without hydrogen penetration synthesizes {approx}37 M{sub sun} of molecules, whereas its 20 M{sub sun} counterpart produces {approx}1.2 M {sub sun}. This smaller efficiency at forming molecules is due to the large fraction of He{sup +} in the outer mass zone of the ejecta. Finally, we discuss the cosmological implication of molecule formation by Pop III SNe in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

COSMIC ORIGINS SPECTROGRAPH OBSERVATIONS OF THE CHEMICAL COMPOSITION OF SNR LMC N132D

We present new far-ultraviolet (far-UV) spectra of an oxygen-rich knot in the Large Magellanic Cloud supernova remnant N132D, obtained with the Hubble Space Telescope (HST)-Cosmic Origins Spectrograph (COS). Moderate-resolution (DELTAv approx 200 km s{sup -1}) spectra in the HST far-UV bandpass (1150 A approx< lambda approx< 1750 A) show emission from several ionization states of oxygen as well as trace amounts of other species. We use the improvements in sensitivity and resolving power offered by COS to separate contributions from different velocity components within the remnant, as well as emission from different species within the oxygen-rich knot itself. This is the first time that compositional and velocity structure in the ultraviolet emission lines from N132D have been resolved. No nitrogen is detected in N132D, and multiple carbon species are found at velocities inconsistent with the main oxygen component. We find helium and silicon to be associated with the oxygen-rich knot and use the reddening-corrected line strengths of O III], O IV], O V, and Si IV to constrain the composition and physical characteristics of this oxygen-rich knot. We find that models with a silicon-to-oxygen abundance ratio of N(Si)/N(O) = 10{sup -2} can reproduce the observed emission for a shock velocity of approx130 km s{sup -1}, implying a mass of approx50 M {sub sun} for the N132D progenitor star.

79 ASTRONOMY AND ASTROPHYSICS↗

EVALUATING SYSTEMATIC DEPENDENCIES OF TYPE Ia SUPERNOVAE: THE INFLUENCE OF DEFLAGRATION TO DETONATION DENSITY

We explore the effects of the deflagration to detonation transition (DDT) density on the production of {sup 56}Ni in thermonuclear supernova (SN) explosions (Type Ia supernovae). Within the DDT paradigm, the transition density sets the amount of expansion during the deflagration phase of the explosion and therefore the amount of nuclear statistical equilibrium (NSE) material produced. We employ a theoretical framework for a well-controlled statistical study of two-dimensional simulations of thermonuclear SNe with randomized initial conditions that can, with a particular choice of transition density, produce a similar average and range of {sup 56}Ni masses to those inferred from observations. Within this framework, we utilize a more realistic 'simmered' white dwarf progenitor model with a flame model and energetics scheme to calculate the amount of {sup 56}Ni and NSE material synthesized for a suite of simulated explosions in which the transition density is varied in the range (1-3) x10{sup 7} g cm{sup -3}. We find a quadratic dependence of the NSE yield on the log of the transition density, which is determined by the competition between plume rise and stellar expansion. By considering the effect of metallicity on the transition density, we find the NSE yield decreases by 0.055 {+-} 0.004 M {sub sun} for a 1 Z{sub sun} increase in metallicity evaluated about solar metallicity. For the same change in metallicity, this result translates to a 0.067 {+-} 0.004 M{sub sun} decrease in the {sup 56}Ni yield, slightly stronger than that due to the variation in electron fraction from the initial composition. Observations testing the dependence of the yield on metallicity remain somewhat ambiguous, but the dependence we find is comparable to that inferred from some studies.

79 ASTRONOMY AND ASTROPHYSICS↗

OFF-AXIS GAMMA-RAY BURST AFTERGLOW MODELING BASED ON A TWO-DIMENSIONAL AXISYMMETRIC HYDRODYNAMICS SIMULATION

Starting as highly relativistic collimated jets, gamma-ray burst outflows gradually slow down and become nonrelativistic spherical blast waves. Although detailed analytical solutions describing the afterglow emission received by an on-axis observer during both the early and late phases of the outflow evolution exist, a calculation of the received flux during the intermediate phase and for an off-axis observer requires either a more simplified analytical model or direct numerical simulations of the outflow dynamics. In this paper, we present light curves for off-axis observers covering the long-term evolution of the blast wave, calculated from a high-resolution two-dimensional relativistic hydrodynamics simulation using a synchrotron radiation model. We compare our results to earlier analytical work and calculate the consequence of the observer angle with respect to the jet axis both for the detection of orphan afterglows and for jet break fits to the observational data. We confirm earlier results in the literature finding that only a very small number of local type Ibc supernovae can harbor an orphan afterglow. For off-axis observers, the observable jet break can be delayed up to several weeks, potentially leading to overestimation of the beaming-corrected total energy. In addition we find that, when using our off-axis light curves to create synthetic Swift X-ray data, jet breaks are likely to remain hidden in the data.

79 ASTRONOMY AND ASTROPHYSICS↗

Closures for multicomponent reacting flows based on dispersion analysis

This work presents algebraic closure models associated with advective transport and nonlinear reactions in a Reynolds-averaged Navier-Stokes context for a system of species subject to binary reactions and transport by advection and diffusion. Expanding upon analysis originally developed for non-reactive transport in the context of Taylor dispersion of scalars, this work extends the modified gradient diffusion model explicated by Peters [N. Peters, Turbulent Combustion, Cambridge Monographs on Mechanics (Cambridge University Press, Cambridge, 2000)] and based on work by Corrsin [S. Corrsin, The reactant concentration spectrum in turbulent mixing with a first-order reaction, J. Fluid Mech. 11, 407 (1961)] beyond single-component transport phenomena and involving nonlinear reactions. The presented model forms, from this weakly nonlinear extension of the original dispersion theory, lead to an analytic expression for the eddy diffusivity matrix that explicitly captures the influence of the reaction kinetics on the closure operators. Furthermore, we demonstrate that the derived model form directly translates between flow topologies through a priori and a posteriori testing of a binary species system subject to homogeneous isotropic turbulence. Using two- and three-dimensional direct numerical simulations involving laminar and turbulent flows, it is shown that this framework improves prediction of mean quantities compared to previous results. Lastly, the presented model form, collapses to the earlier gradient diffusion and its modified version derived by Corrsin in the limits of nonreactive species and linear reactions, respectively.

42 ENGINEERING↗

Possibilities For The LAGUNA Projects At The Frejus Site

The present laboratory (LSM) at the Frejus site and the project of a first extension of it, mainly aimed at the next generation of dark matter and double beta decay experiments, are briefly reviewed. Then the main characteristics of the LAGUNA cooperation and Design Study network are summarized. Seven underground sites in Europe are considered in LAGUNA and are under study as candidates for the installation of Megaton scale detectors using three different techniques: a liquid Argon TPC (GLACIER), a liquid scintillator detector (LENA) and a Water Cerenkov (MEMPHYS), all mainly aimed at investigation of proton decay and properties of neutrinos from SuperNovae and other astrophysical sources as well as from accelerators (Super-beams and/or Beta-beams from CERN). One of the seven sites is located at Frejus, near the present LSM laboratory, and the results of its feasibility study are presented and discussed. Then the physics potential of a MEMPHYS detector installed in this site are emphasized both for non-accelerator and for neutrino beam based configurations. The MEMPHYNO prototype with its R and D programme is presented. Finally a possible schedule is sketched.

79 ASTRONOMY AND ASTROPHYSICS↗

DIMENSION AS A KEY TO THE NEUTRINO MECHANISM OF CORE-COLLAPSE SUPERNOVA EXPLOSIONS

We explore the dependence on spatial dimension of the viability of the neutrino heating mechanism of core-collapse supernova explosions. We find that the tendency to explode is a monotonically increasing function of dimension, with three dimensions (3D) requiring {approx}40%-50% lower driving neutrino luminosity than one dimension and {approx}15%-25% lower driving neutrino luminosity than two dimensions (2D). Moreover, we find that the delay to explosion for a given neutrino luminosity is always shorter in 3D than 2D, sometimes by many hundreds of milliseconds. The magnitude of this dimensional effect is much larger than the purported magnitude of a variety of other effects, such as nuclear burning, inelastic scattering, or general relativity, which are sometimes invoked to bridge the gap between the current ambiguous and uncertain theoretical situation and the fact of robust supernova explosions. Since real supernovae occur in three dimensions, our finding may be an important step toward unraveling one of the most problematic puzzles in stellar astrophysics. In addition, even though in 3D, we do see pre-explosion instabilities and blast asymmetries, unlike the situation in 2D, we do not see an obvious axially symmetric dipolar shock oscillation. Rather, the free energy available to power instabilities seems to be shared by more and more degrees of freedom as the dimension increases. Hence, the strong dipolar axisymmetry seen in 2D and previously identified as a fundamental characteristic of the shock hydrodynamics may not survive in 3D as a prominent feature.

79 ASTRONOMY AND ASTROPHYSICS↗

First direct measurement of the {sup 23}Mg(p,gamma){sup 24}Al reaction

The lowest-energy resonance in the {sup 23}Mg(p,gamma){sup 24}Al reaction, which is dominant at classical nova temperatures, has been measured directly for the first time using the DRAGON recoil spectrometer. The experiment used a radioactive {sup 23}Mg beam (mixed within a significantly stronger {sup 23}Na beam) of peak intensity 5x10{sup 7} s{sup -1}, at the ISAC facility at TRIUMF. We extract values of E{sub R}=485.7{sub -1.8}{sup +1.3} keV and omegagamma=38{sub -15}{sup +21} meV from our data (all values in the center-of-mass frame unless otherwise stated). In addition, the experiment prompted a recalculation of the Q value for this reaction based on a revision of the {sup 24}Al mass. The effect on the uncertainties in the quantities of ejected {sup 22}Na and {sup 26}Al from oxygen-neon classical novae is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Detailed finite element method modeling of evaporating multi-component droplets

The evaporation of sessile multi-component droplets is modeled with an axisymmetic finite element method. The model comprises the coupled processes of mixture evaporation, multi-component flow with composition-dependent fluid properties and thermal effects. Based on representative examples of water–glycerol and water–ethanol droplets, regular and chaotic examples of solutal Marangoni flows are discussed. Furthermore, the relevance of the substrate thickness for the evaporative cooling of volatile binary mixture droplets is pointed out. It is shown how the evaporation of the more volatile component can drastically decrease the interface temperature, so that ambient vapor of the less volatile component condenses on the droplet. Finally, results of this model are compared with corresponding results of a lubrication theory model, showing that the application of lubrication theory can cause considerable errors even for moderate contact angles of 40°. - Graphical abstract:.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrated modeling methodology for ash agglomeration in poly-disperse fluidized beds using particle population framework

This article discusses a unique agglomeration modeling methodology developed based on binary collisions to combine the effects of heterogeneity in ash chemistry and granular physics. A simple population balance is defined to find changes in the particle size distribution (PSD) of a fluidized bed. Thermodynamic equilibrium calculations and a computational fluid dynamics (CFD) code, are used to obtain hydrodynamic parameters. A method to calculate and use a distribution of collision frequencies in fluidized beds, corresponding to a poly-disperse particle size distribution, was developed in order to incorporate the particle level heterogeneities. A distribution of collision frequencies obtained for poly-dispersed particles showed a three orders of magnitude higher collision frequency amongst the smaller particles than the coarser ones, at the initiation of agglomeration. Ash agglomeration occurred when the slag amount (binder) was less than 10 wt% at temperatures <850 °C for Pittsburgh No. 8 coal.

42 ENGINEERING↗