SEARCH · Engineering Papers

Results for “Atmospheric Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Crossing the Boundaries in Planetary Atmospheres - From Earth to Exoplanets

The past decade has been an especially exciting time to study atmospheres, with a renaissance in fundamental studies of Earths general circulation and hydrological cycle, stimulated by questions about past climates and the urgency of projecting the future impacts of humankinds activities. Long-term spacecraft and Earth-based observation of solar system planets have now reinvigorated the study of comparative planetary climatology. The explosion in discoveries of planets outside our solar system has made atmospheric science integral to understanding the diversity of our solar system and the potential habitability of planets outside it. Thus, the AGU Chapman Conference Crossing the Boundaries in Planetary Atmospheres From Earth to Exoplanets, held in Annapolis, MD from June 24-27, 2013 gathered Earth, solar system, and exoplanet scientists to share experiences, insights, and challenges from their individual disciplines, and discuss areas in which thinking broadly might enhance our fundamental understanding of how atmospheres work.

hydrological cycle↗

NASA NTRS2010

NASA Perspectives on Earth Observations from Satellite or 50 Years of Meteorological Satellite Experiments-The NASA Perspective

The NASA was established in 1959. From those very eady days to the present NASA has been intimately involved with NOAA and the scientific community in the development and operation of satellite and sensor experiments. The early efforts included experiments on the TIROS and geostationary Applications Technology Satellites (ATS) series. In the latter case the spin-scan cameras conceived by Verner Suomi, along with the TIROS cameras, opened new vistas at what could be done in meteorological studies with the daily, nearly global, synoptic views from space-borne sensors As the years passed and the Nimbus series of satellites came into being in the 1960's, more quantitative observations with longer-lifetime, increasingly capable, better calibrated instruments came into being. NASA, in collaboration with and in support of NOAA, implemented operational systems that we now know as the Polar Operational Environmental Satellite (POES) series and the Geostationary Operational Environmental Satellite (GOES) series that provided dependable, continuous, dedicated satellite observations for use by the weather and atmospheric science communities. Through the 1970's, 1980's, and 1990's improved, well-calibrated instruments with more spectral bands extending into the thermal and the microwave portions of the electromagnetic spectrum were provided to obtain accurate soundings of the atmosphere, atmospheric chemistry constituents such as ozone, global sea surface temperature, snow and ice extent, vegetation dynamics, etc. In the 1990's and up to the present the NASA/Earth Observing System (EOS) has been developed, implemented, and operated over many years to provide a very comprehensive suite of observations of the atmosphere, as well as land and ocean parameters. The future looks bright wherein the development of new systems, broadly described by the National Academy of Science Decadal Study, is now underway. NASA, along with collaborations with NOAA, other agencies, and the scientific and applications communities looks forward to achieving in the years to come goals possible with the global information provided by satellites and continuously improved with technology development, joint data assimilation efforts, and attendant research studies.

Einaudi, Franco↗

NASA NTRS1998

Lidar Measurements of Tropospheric Wind Profiles with the Double Edge Technique

Research has established the importance of global tropospheric wind measurements for large scale improvements in numerical weather prediction. In addition, global wind measurements provide data that are fundamental to the understanding and prediction of global climate change. These tasks are closely linked with the goals of the NASA Earth Science Enterprise and Global Climate Change programs. NASA Goddard has been actively involved in the development of direct detection Doppler lidar methods and technologies to meet the wind observing needs of the atmospheric science community. A variety of direct detection Doppler wind lidar measurements have recently been reported indicating the growing interest in this area. Our program at Goddard has concentrated on the development of the edge technique for lidar wind measurements. Implementations of the edge technique using either the aerosol or molecular backscatter for the Doppler wind measurement have been described. The basic principles have been verified in lab and atmospheric lidar wind experiments. The lidar measurements were obtained with an aerosol edge technique lidar operating at 1064 nm. These measurements demonstrated high spatial resolution (22 m) and high velocity sensitivity (rms variances of 0.1 m/s) in the planetary boundary layer (PBL). The aerosol backscatter is typically high in the PBL and the effects of the molecular backscatter can often be neglected. However, as was discussed in the original edge technique paper, the molecular contribution to the signal is significant above the boundary layer and a correction for the effects of molecular backscatter is required to make wind measurements. In addition, the molecular signal is a dominant source of noise in regions where the molecular to aerosol ratio is large since the energy monitor channel used in the single edge technique measures the sum of the aerosol and molecular signals. To extend the operation of the edge technique into the free troposphere we have developed a variation of the edge technique called the double edge technique. In this paper a ground based aerosol double edge lidar is described and the first measurements of wind profiles in the free troposphere obtained with this lidar will be presented.

Gentry, Bruce M.↗

NASA NTRS2004

Parametric Study for Increasing On-Station Duration via Unconventional Aircraft Launch Approach

The need for better atmospheric predictions is causing the atmospheric science community to look for new ways to obtain longer, higher-resolution measurements over several diurnal cycles. The high resolution, in-situ measurements required to study many atmospheric phenomena can be achieved by an Autonomous Aerial Observation System (AAOS); however, meeting the long on-station time requirements with an aerial platform poses many challenges. Inspired by the half-scale drop test of the deployable Aerial Regional-scale Environmental Survey (ARES) Mars airplane, a study was conducted at the NASA Langley Research Center to examine the possibility of increasing on-station time by launching an airplane directly at the desired altitude. The ARES Mars airplane concept was used as a baseline for Earth atmospheric flight, and parametric analyses of fundamental configuration elements were performed to study their impact on achieving desired on-station time with this class of airplane. The concept involved lifting the aircraft from the ground to the target altitude by means of an air balloon, thereby unburdening the airplane of ascent requirements. The parameters varied in the study were aircraft wingspan, payload, fuel quantity, and propulsion system. The results show promising trends for further research into aircraft-payload design using this unconventional balloon-based launch approach.

Kuhl, Christopher A.↗

NASA NTRSDate not supplied

ASDC Distribution and Services of TEMPO Data

The Tropospheric Emissions: Monitoring of POllution (TEMPO) instrument represents a groundbreaking advancement in remote sensing technology, providing real-time and high-resolution measurements of atmospheric pollutants and air quality monitoring. This presentation will highlight the significance of TEMPO and its data distribution by NASA’s Atmospheric Science Data Center (ASDC) to facilitate the analyses by the research and end user communities. TEMPO's geostationary orbit allows for continuous and high-resolution measurements of key atmospheric pollutants, including nitrogen dioxide (NO 2 ), ozone (O 3 ), and formaldehyde (HCHO). As a result, researchers can investigate the distribution patterns of these pollutants on an hourly basis, providing valuable information for understanding regional and temporal variations in air quality. Furthermore, this presentation will highlight the usability of TEMPO data in complementing ground-based air quality monitoring networks. ASDC distribution services and tools facilitate efficient data handling and analysis to support research and application uses of TEMPO data. As part of NASA’s Earthdata ecosystem, TEMPO will be available through Earthdata Search and Worldview, as well as have variable and spatial subsetting capabilities. This presentation will provide an overview of data access and services available for TEMPO data.

Hazem Mahmoud↗

NASA NTRS1992

The Atmospheric Effects of Stratospheric Aircraft: a First Program Report

Studies have indicated that, with sufficient technology development, high speed civil transport aircraft could be economically competitive with long haul subsonic aircraft. However, uncertainty about atmospheric pollution, along with community noise and sonic boom, continues to be a major concern; and this is addressed in the planned 6 yr HSRP begun in 1990. Building on NASA's research in atmospheric science and emissions reduction, the AESA studies particularly emphasizing stratospheric ozone effects. Because it will not be possible to directly measure the impact of an HSCT aircraft fleet on the atmosphere, the only means of assessment will be prediction. The process of establishing credibility for the predicted effects will likely be complex and involve continued model development and testing against climatological patterns. Lab simulation of heterogeneous chemistry and other effects will continue to be used to improve the current models.

Prather, Michael J.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-35698-DND

The NASA Langley Atmospheric Science Data Center (ASDC) is using the Esri ArcGIS Platform to improve data discoverability, accessibility and interoperability to meet their diversified userbase. As a NASA Distributed Active Archive Center (DAAC), ASDC is actively working to provide their atmospheric datasets as ArcGIS Image Services by leveraging the ArcGIS multidimensional suite of tools. This presentation will provide a brief overview of the ArcGIS Platform implementation at ASDC, an overview of the ArcGIS collaboration occurring among DAACs, as well as NASA Earth Science data application with partnering projects like the Prediction Of Worldwide Energy Resources (POWER).

Matthew Tisdale↗

NASA NTRS1979

A GCM simulation of the earth-atmosphere radiation balance for winter and summer

The radiation balance of the earth-atmosphere system simulated by using the general circulation model (GCM) of the Laboratory for Atmospheric Sciences (GLAS) is examined in regards to its graphical distribution, zonally-averaged distribution, and global mean. Most of the main features of the radiation balance at the top of the atmosphere are reasonably simulated, with some differences in the detailed structure of the patterns and intensities for both summer and winter in comparison with values as derived from Nimbus and NOAA (National Oceanic and Atmospheric Administration) satellite observations. Both the capability and defects of the model are discussed.

Wu, M. L. C.↗

NASA NTRS1980

The GLAS physical inversion method for analysis of TIROS N data

The Goddard Laboratory for Atmospheric Sciences approach to temperature sounding from satellite observations is fundamentally different from that of NESS in that heavy reliance is placed on the ability to model accurately the instrumental response to atmospheric and surface conditions, while no use is made of statistical relationships between satellite observations and atmospheric temperature profiles. The method involves starting with a guess set of atmospheric and surface conditions from which expected brightness temperatures for the satellite observations are computed. Then, iterative relaxation of atmospheric and surface conditions is performed according to the difference between observed and computed brightness temperatures until sufficient agreement is reached. In the absence of sufficient agreement, no retrieval is produced for that location.

Susskind, J.↗

NASA NTRS2012

670-GHz Down- and Up-Converting HEMT-Based Mixers

A large category of scientific investigation takes advantage of the interactions of signals in the frequency range from 300 to 1,000 GHz and higher. This includes astronomy and atmospheric science, where spectral observations in this frequency range give information about molecular abundances, pressures, and temperatures of small-sized molecules such as water. Additionally, there is a minimum in the atmospheric absorption at around 670 GHz that makes this frequency useful for terrestrial imaging, radar, and possibly communications purposes. This is because 670 GHz is a good compromise for imaging and radar applications between spatial resolution (for a given antenna size) that favors higher frequencies, and atmospheric losses that favor lower frequencies. A similar trade-off applies to communications link budgets: higher frequencies allow smaller antennas, but incur a higher loss. All of these applications usually require converting the RF (radio frequency) signal at 670 GHz to a lower IF (intermediate frequency) for processing. Further, transmitting for communication and radar generally requires up-conversion from IF to the RF. The current state-of-the-art device for performing the frequency conversion is based on Schottky diode mixers for both up and down conversion in this frequency range for room-temperature operation. Devices that can operate at room temperature are generally required for terrestrial, military, and planetary applications that cannot tolerate the mass, bulk, and power consumption of cryogenic cooling. The technology has recently advanced to the point that amplifiers in the region up to nearly 1,000 GHz are feasible. Almost all of these have been based on indium phosphide pseudomorphic high-electron mobility transistors (pHEMTs), in the form of monolithic microwave integrated circuits (MMICs). Since the processing of HEMT amplifiers is quite differ en t from that of Schottky diodes, use of Schottky mixers requires separate MMICs for the mixers and amplifiers. Fabrication of all the down-/up-conversion circuitry on single MMICs, using a ll-HEMT circuits, would constitute a major advance in circuit simplicity.

Schlecht, Enrich T.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-33992-DND

The CERES Science Team integrates and fuses observations from 6 CERES instruments aboard the Terra, Aqua, S-NPP, and NOAA-20 missions with data from more than 20 other unique data sources. Following the November 2017 launch of CERES Flight Model 6 (FM6) onboard NOAA20, CERES has now amassed over 80 instrument-years of valuable Earth radiation budget data. The rapidly growing volume of CERES data coupled with the introduction of new data products alongside improvements to existing science algorithms fosters the requirement for faster, more flexible, and scalable data production and orchestration. New virtualized, cloud-centric compute hardware hosted by the NASA Langley Research Center’s (LaRC) Atmospheric Sciences Data Center (ASDC) provides an ideal environment for these ever-increasing data production demands for CERES. This poster discusses updates to the implementation of the CERES Data Management Team’s (DMT) CERES AuTomAted job Loading sYSTem (CATALYST), a custom data processing workflow engine for CERES, to use on-demand computing resources to perform automated CERES data production processing in a Linux-based container environment. Linux containers provide CERES the flexibility to build multiple production environments in containers tailored for specific workloads and allow effortless provisioning of resources based on the CERES Science Team’s data production requirements.

Thomas N. Hillyer↗

NASA NTRS2018

SAEVe (Seismic and Atmospheric Exploration of Venus): A Long-Lived Lander Concept for Venus

Many crucial geophysical and atmospheric science investigations at Venus require operations on the surface for an entire solar day. Until recently this was not achievable, but new developments in high temperature electronics have now made months long operations on the Venus surface possible even with smallsat class missions. Here we describe a study of a long-lived Venus lander called SAEVe, for Seismic and Atmospheric Exploration of Venus: this was one of the concepts selected in 2017 under NASA's Planetary Science Deep Space SmallSat Studies (PSDS3) call.

lander concept↗

DOE OSTI2025

Using ground-based lidar data to investigate the water–vapor budget in the daytime atmospheric boundary layer

The moisture advection term in the water–vapor budget equation is investigated with a combination of a vertically-staring water–vapor lidar and Doppler lidar systems. These instruments make it possible to get the mean profile of moisture tendency and the latent heat flux (LHF) divergence. We use data of the Land–Atmosphere Feedback Experiment (LAFE) at the Atmospheric Radiation Measurement (ARM) Program’s Southern Great Plains (SGP) site, Oklahoma, USA, collected on 30 August 2017 between 15 and 24 UTC, which corresponds to 09 to 18 LT. The lidars provide turbulence resolving profiles of moisture and vertical wind fluctuations. The LHF profile is derived from the covariance of these moisture and vertical wind fluctuations. The mean boundary layer height z i is determined from the peak of the moisture variance. The results demonstrate that the combination of two remote sensing instruments can be applied for determining the dominant water–vapor budget terms, namely moisture tendency, latent heat flux divergence and moisture advection.

Advection↗

NASA NTRS1990

Final shuttle-derived atmospheric database: Development and results from thirty-two flights

The final Shuttle-derived atmospheric data base is presented. The relational data base is comprised of data from 32 Space Transportation System (STS) descent flights, to include available meteorology data taken in support of each flight. For the most part, the available data are restricted to the middle atmosphere. In situ accelerations, sensed by the tri-redundant Inertial Measurement Unit (IMU) to an accuracy better than 1 mg, are combined with post-flight Best Estimate Trajectory (BET) information and predicted, flight-substantiated Orbiter aerodynamics to provide determinations up to altitudes of 95 km. In some instances, alternate accelerometry data with micro-g resolution were utilized to extend the data base well into the thermosphere. Though somewhat limited, the ensemble of flights permit a reasonable sampling of monthly, seasonal, and latitudinal variations which can be utilized for atmospheric science investigations and model evaluations and upgrades as appropriate. More significantly, the unparallel vertical resolution in the Shuttle-derived results indicate density shears normally associated with internal gravity waves or local atmospheric instabilities. Consequently, these atmospheres can also be used as stress-atmospheres for Guidance, Navigation and Control (GN and C) system development and analysis as part of any advanced space vehicle design activities.

Findlay, John T.↗

NASA NTRS2015

Earth Science With the Stratospheric Aerosol and Gas Experiment III (SAGE III) on the International Space Station

The Stratospheric Aerosol and Gas Experiment (SAGE) III is the fourth generation of solar occultation instruments operated by NASA, the first coming under a different acronym, to investigate the Earth's upper atmosphere. Three flight-ready SAGE III instruments were built by Ball Aerospace in the late 1990s, with one launched aboard the former Russian Aviation and Space Agency (now known as Roskosmos) Meteor-3M platform on 10 December 2001 (continuing until the platform lost power in 2006). Another of the original instruments was manifested for the ISS in the 2004 time frame, but was delayed because of budgetary considerations. Fortunately, that SAGE III/ISS mission was restarted in 2009 with a major focus upon filling an anticipated gap in ozone and aerosol observation in the second half of this decade. Here we discuss the mission architecture, its implementation, and data that will be produced by SAGE III/ISS, including their expected accuracy and coverage. The 52-degree inclined orbit of the ISS is well-suited for solar occultation and provides near-global observations on a monthly basis with excellent coverage of low and mid-latitudes. This is similar to that of the SAGE II mission (1985-2005), whose data set has served the international atmospheric science community as a standard for stratospheric ozone and aerosol measurements. The nominal science products include vertical profiles of trace gases, such as ozone, nitrogen dioxide and water vapor, along with multi-wavelength aerosol extinction. Though in the visible portion of the spectrum the brightness of the Sun is one million times that of the full Moon, the SAGE III instrument is designed to cover this large dynamic range and also perform lunar occultations on a routine basis to augment the solar products. The standard lunar products were demonstrated during the SAGE III/M3M mission and include ozone, nitrogen dioxide & nitrogen trioxide. The operational flexibility of the SAGE III spectrometer accomplishes the main goal of producing ozone and aerosol extinction profiles, while allowing exploration of new possibilities for the occultation technique, such as night-time aerosol extinction profiles or other trace gases not measured by SAGE in the past.

Zawodny, Joe↗

DOE OSTI2022

A Procedure to Correct the Historical Atmospheric Longwave Irradiance Data When the World Reference Is Established with Respect to the International System of Units

Historical atmospheric longwave irradiance data sets with traceability to the International System of Units (SI) are essential for renewable energy and atmospheric science research and applications. To date, all pyrgeometers used to measure the irradiance are traceable to the interim World Infrared Standard Group (WISG), not to SI units. In 2013, the Absolute Cavity Pyrgeometer (ACP) (Reda et al. 2012) was developed at the National Renewable Energy Laboratory (NREL) to measure the atmospheric longwave irradiance. The ACP has been compared against the InfraRed Integrating Sphere (IRIS), developed by the Physikalisch-Meteorologisches Observatorium Davos/World Radiation Center (PMOD/WRC) (Gröbner 2012). The ACP and the IRIS are absolute instruments traceable to SI units through the International Temperature Scale of 1990. Results of six comparisons between the ACP and the IRIS at different locations have shown that the irradiance measured by WISG pyrgeometers underestimates clear-sky atmospheric longwave irradiance by 2 W/m 2 to 6 W/m 2 (Gröbner et al. 2014); therefore, once the world reference is established with traceability to SI units, the WISG would be corrected, then used to calibrate field pyrgeometers with traceability to SI units. The following described method is used to correct the historical atmospheric longwave irradiance data sets in anticipation of the WISG scale change.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRSDate not supplied

The Complex Refractive Indices of Mineral Aerosols and Why They Matter

Aerosol refractive indices are fundamental parameters that are generally measured by spec-troscopists with specialized knowledge. We in the Earth science community frequently utilizethese refractive indices because they are essential for computing aerosol radiative effects andretrieving aerosol composition. Unfortunately, there are a wide variety of refractive indiceswith significant differences for some aerosol species (e.g., hematite) and a lack of refractiveindex choices for other aerosols (e.g., clay minerals, goethite), and this hinders our ability toaccurately compute the radiative effect of mineral dust. Additionally, the mineral refractiveindices used in atmospheric science are not necessarily linked to the mineral reflectancesused to identify surface mineralogy; this creates a disconnect between the atmosphere andthe surface that frustrates closure analyses.In this talk, we will present an overview of some refractive indices of radiative importancein aeolian dust (illite, kaolinite, montmorillonite, hematite, goethite). We will discuss howmineral refractive indices are used in aerosol retrievals, and how we can use remote sensingretrievals to narrow the range of viable choices. We will also discuss how we can use pub-lished spectroscopic measurements to extrapolate the refractive indices that are inferred ata handful of visible and near-infrared wavelengths to the longwave regime. Finally, we willdiscuss how working groups like MIRA (Models, In situ, and Remote sensing of Aerosols;https://science.larc.nasa.gov/mira-wg/) and community repositories like TAO (Tables ofAerosol Optics) can improve radiative closure by enhancing interactions between the threedisciplines.1

aerosols↗

NASA NTRS2009

Spacelab Science Results Study

Beginning with OSTA-1 in November 1981 and ending with Neurolab in March 1998, a total of 36 Shuttle missions carried various Spacelab components such as the Spacelab module, pallet, instrument pointing system, or mission peculiar experiment support structure. The experiments carried out during these flights included astrophysics, solar physics, plasma physics, atmospheric science, Earth observations, and a wide range of microgravity experiments in life sciences, biotechnology, materials science, and fluid physics which includes combustion and critical point phenomena. In all, some 764 experiments were conducted by investigators from the U.S., Europe, and Japan. The purpose of this Spacelab Science Results Study is to document the contributions made in each of the major research areas by giving a brief synopsis of the more significant experiments and an extensive list of the publications that were produced. We have also endeavored to show how these results impacted the existing body of knowledge, where they have spawned new fields, and if appropriate, where the knowledge they produced has been applied.

Naumann, R. J.↗