Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aircraft airspeed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

AV-8B system identification results from full scale development flight test program

The results presented in this paper demonstrate a methodology for identification of a non-linear model of the AV-88 V/STOL aircraft from flight test data. Conventional aerodynamics, thrust-induced aerodynamic effects and propulsion model correction factors are identified for hover, transitional and low-speed wingborne flight conditions. A special model formulation is adopted which is continuous at zero airspeed. The identified model is validated by prediction of flight test measurements, and by comparison with wind-tunnel results.

Anderson, L. C.↗
NASA NTRS2006

Singular-Arc Time-Optimal Trajectory of Aircraft in Two-Dimensional Wind Field

This paper presents a study of a minimum time-to-climb trajectory analysis for aircraft flying in a two-dimensional altitude dependent wind field. The time optimal control problem possesses a singular control structure when the lift coefficient is taken as a control variable. A singular arc analysis is performed to obtain an optimal control solution on the singular arc. Using a time-scale separation with the flight path angle treated as a fast state, the dimensionality of the optimal control solution is reduced by eliminating the lift coefficient control. A further singular arc analysis is used to decompose the original optimal control solution into the flight path angle solution and a trajectory solution as a function of the airspeed and altitude. The optimal control solutions for the initial and final climb segments are computed using a shooting method with known starting values on the singular arc The numerical results of the shooting method show that the optimal flight path angle on the initial and final climb segments are constant. The analytical approach provides a rapid means for analyzing a time optimal trajectory for aircraft performance.

Nguyen, Nhan↗
NASA NTRS1988

Figures of merit for airfoil/aircraft design integration

Because the airfoil can so strongly impact other aspects of an aircraft configuration, it is important that the airfoil design process be integrated with that of the aircraft to achieve the best possible performance of a new flight vehicle. To aid in preliminary design efforts, several aerodynamic figures of merit are presented which facilitate the matching of the airfoil performance characteristics to those of the aircraft. These figures of merit are fairly general and can assist the airfoil design process for flight vehicles designed for maximum endurance, range, or ceiling. Although specifically applicable to vehicles for which the wing area is sized by some required minimum airspeed, the discussion is pertinent to all airfoil/aircraft matching situations and points the way for developing similar figures of merit to aid the airfoil/aircraft design process for any flight vehicle.

Maughmer, Mark D.↗
NASA NTRS2010

Modeling the Launch Abort Vehicle's Subsonic Aerodynamics from Free Flight Testing

An investigation into the aerodynamics of the Launch Abort Vehicle for NASA's Constellation Crew Launch Vehicle in the subsonic, incompressible flow regime was conducted in the NASA Langley 20-ft Vertical Spin Tunnel. Time histories of center of mass position and Euler Angles are captured using photogrammetry. Time histories of the wind tunnel's airspeed and dynamic pressure are recorded as well. The primary objective of the investigation is to determine models for the aerodynamic yaw and pitch moments that provide insight into the static and dynamic stability of the vehicle. System IDentification Programs for AirCraft (SIDPAC) is used to determine the aerodynamic model structure and estimate model parameters. Aerodynamic models for the aerodynamic body Y and Z force coefficients, and the pitching and yawing moment coefficients were identified.

Hartman, Christopher L.↗
NASA NTRS1991

Introduction of the M-85 high-speed rotorcraft concept

As a result of studying possible requirements for high-speed rotorcraft and studying many high-speed concepts, a new high-speed rotorcraft concept, designated as M-85, was derived. The M-85 is a helicopter that is reconfigured to a fixed-wing aircraft for high-speed cruise. The concept was derived as an approach to enable smooth, stable conversion between fixed-wing and rotary-wing while retaining hover and low-speed flight characteristics of a low disk loading helicopter. The name, M-85, reflects the high-speed goals of 0.85 Mach number at high altitude. For a high-speed rotorcraft, it is expected that a viable concept must be a cruise-efficient, fixed-wing aircraft so it may be attractive for a multiplicity of missions. It is also expected that a viable high-speed rotorcraft concept must be cruise efficient first and secondly, efficient in hover. What makes the M-85 unique is the large circular hub fairing that is large enough to support the aircraft during conversion between rotary-wind and fixed-wing modes. With the aircraft supported by this hub fairing, the rotor blades can be unloaded during the 100 percent change in rotor rpm. With the blades unloaded, the potential for vibratory loads would be lessened. In cruise, the large circular hub fairing would be part of the lifting system with additional lifting panels deployed for better cruise efficiency. In hover, the circular hub fairing would slightly reduce lift potential and/or decrease hover efficiency of the rotor system. The M-85 concept is described and estimated forward flight performance characteristics are presented in terms of thrust requirements and L/D with airspeed. The forward flight performance characteristics reflect recent completed wind tunnel tests of the wing concept. Also presented is a control system technique that is critical to achieving low oscillatory loads in rotary-wing mode. Hover characteristics, C(sub p) versus C(sub T) from test data, is discussed. Other techniques pertinent to the M-85 concept such as passively controlling inplane vibration during starting and stopping of the rotor system, aircraft control system, and rotor drive technologies are discussed.

Stroub, Robert H.↗
NASA NTRS1984

Body-freedom flutter of a 1/2-scale forward-swept-wing model, an experimental and analytical study

The aeroelastic phenomenon known as body-freedom flutter (BFF), a dynamic instability involving aircraft-pitch and wing-bending motions which, though rarely experienced on conventional vehicles, is characteristic of forward swept wing (FSW) aircraft was investigated. Testing was conducted in the Langley transonic dynamics tunnel on a flying, cable-mounted, 1/2-scale model of a FSW configuration with and without relaxed static stability (RSS). The BFF instability boundaries were found to occur at significantly lower airspeeds than those associated with aeroelastic wing divergence on the same model. For those cases with RSS, a canard-based stability augmentation system (SAS) was incorporated in the model. This SAS was designed using aerodynamic data measured during a preliminary tunnel test in which the model was attached to a force balance. Data from the subsequent flutter test indicated that BFF speed was not dependent on open-loop static margin but, rather, on the equivalent closed-loop dynamics provided by the SAS. Servo-aeroelastic stability analyses of the flying model were performed using a computer code known as SEAL and predicted the onset of BFF reasonably well.

Chipman, R.↗
NASA NTRS1990

Proposed definition of the term en route in en route aircraft noise

The problem of en route aircraft noise was examined in a formal, dedicated, setting. Whereas the general meaning of the term en route might be intuitively understood, it is suggested that a precise formal definition of the term en route would be opportune from the outset, especially since the scientific and technical investigation of the problem of noise immissions on the ground from aircraft in flight away from the airspace of an airport may conceivably lead to administrative, regulatory, and legal consequences that would mandatorily require a precise definition of the term en route. Five flight segments, with their differing airframe configurations, engine thrusts, and airspeed management, should form the basis for the differential consideration of the noise immissions perceived on the ground underneath or near the defined segments of the flightpath in en route flight, from the end of the initial climb from an airport after takeoff until the final approach to an airport.

Garbell, Maurice A.↗
NASA NTRS2017

Extraction-Separation Performance and Dynamic Modeling of Orion Test Vehicles with Adams Simulation: 3rd Edition

NASA's Orion Capsule Parachute Assembly System (CPAS) Project is now in the qualification phase of testing, and the Adams simulation has continued to evolve to model the complex dynamics experienced during the test article extraction and separation phases of flight. The ability to initiate tests near the upper altitude limit of the Orion parachute deployment envelope requires extractions from the aircraft at 35,000 ft-MSL. Engineering development phase testing of the Parachute Test Vehicle (PTV) carried by the Carriage Platform Separation System (CPSS) at altitude resulted in test support equipment hardware failures due to increased energy caused by higher true airspeeds. As a result, hardware modifications became a necessity requiring ground static testing of the textile components to be conducted and a new ground dynamic test of the extraction system to be devised. Force-displacement curves from static tests were incorporated into the Adams simulations, allowing prediction of loads, velocities and margins encountered during both flight and ground dynamic tests. The Adams simulation was then further refined by fine tuning the damping terms to match the peak loads recorded in the ground dynamic tests. The failure observed in flight testing was successfully replicated in ground testing and true safety margins of the textile components were revealed. A multi-loop energy modulator was then incorporated into the system level Adams simulation model and the effect on improving test margins be properly evaluated leading to high confidence ground verification testing of the final design solution.

Varela, Jose G.↗
NASA NTRS2019

Pilot Evaluation of Proposed Go-Around Criteria for Transport Category Aircraft

The primary objective of this study was to capture pilot feedback and decision-making with regard to proposed, hypothetical, go-around criteria that were developed based on previous research. A secondary objective of the study was to assess crew members' awareness of the aircraft state on approach. An experiment was conducted using Boeing 737-800 and Airbus A330-200 level D full-flight simulators, in which pilots flew multiple approaches which were on the borderline of the proposed go-around criteria at 300 ft. Pilots were instructed that they could either execute a go-around or land the airplane on each run, forcing a decision for the borderline cases at 300 ft. Pilots were instructed to go around if the aircraft was outside of the go-around criteria at 300 ft or if either pilot was uncomfortable with the approach. The results revealed that: 1) the most important factors which drove go-around decision-making during the experiment were airspeed and localizer deviation, 2) the objective data suggested that the 300-ft gate is viable, although many pilots were still uncomfortable with that gate height; perhaps more emphasis on checking stability at 1,000 ft and 500 ft would make more pilots comfortable with the 300-ft go-around gate, 3) allowing for momentary deviations should be considered, and 4) the acceptability of the criteria is highly dependent on given pilot's risk tolerance. Overall, the proposed criteria performed well, and most pilots would find the criteria acceptable with some minor adjustments.

go-arounds↗
NASA NTRS1948

Determination of Aircraft Antenna Loads Produced by Natural Icing Conditions

A flight investigation was made to determine the effect of distance flown in the icing region, antenna length, and antenna angle on the tension occurring in aircraft antennae while in regions of aircraft icing. The experimental antennas were of lengths ranging from 15 to 43 feet and were placed at angles of 0 deg to 64 deg with the airplane thrust axis. Distances up to 256 miles were flown in diverse icing conditions at true airspeeds from 157 to 214 miles per hour and pressure altitudes at which icing conditions were encountered. The results indicate that: The effect of ice formation on antenna tension increased with the angle of the antennas with the longitudinal axis of the airplane. The maximum tension for antennae having angles from 0 deg to 15 deg was 68 pounds, whereas the maximum tension for antennas having angles of 44 deg and 64 deg was 274 and 438 pounds, respectively.

Kepple, William L↗
NASA NTRS2012

Flight Dynamics Modeling and Simulation of a Damaged Transport Aircraft

A study was undertaken at NASA Langley Research Center to establish, demonstrate, and apply methodology for modeling and implementing the aerodynamic effects of MANPADS damage to a transport aircraft into real-time flight simulation, and to demonstrate a preliminary capability of using such a simulation to conduct an assessment of aircraft survivability. Key findings from this study include: superpositioning of incremental aerodynamic characteristics to the baseline simulation aerodynamic model proved to be a simple and effective way of modeling damage effects; the primary effect of wing damage rolling moment asymmetry may limit minimum airspeed for adequate controllability, but this can be mitigated by the use of sideslip; combined effects of aerodynamics, control degradation, and thrust loss can result in significantly degraded controllability for a safe landing; and high landing speeds may be required to maintain adequate control if large excursions from the nominal approach path are allowed, but high-gain pilot control during landing can mitigate this risk.

Shah, Gautam H.↗
NASA NTRS1982

V/STOL Tandem Fan transition section model test

An approximately 0.25 scale model of the transition section of a tandem fan variable cycle engine nacelle was tested in the NASA Lewis Research Center 10-by-10 foot wind tunnel. Two 12-inch, tip-turbine driven fans were used to simulate a tandem fan engine. Three testing modes simulated a V/STOL tandem fan airplane. Parallel mode has two separate propulsion streams for maximum low speed performance. A front inlet, fan, and downward vectorable nozzle forms one stream. An auxilliary top inlet provides air to the aft fan - supplying the core engine and aft vectorable nozzle. Front nozzle and top inlet closure, and removal of a blocker door separating the two streams configures the tandem fan for series mode operations as a typical aircraft propulsion system. Transition mode operation is formed by intermediate settings of the front nozzle, blocker door, and top inlet. Emphasis was on the total pressure recovery and flow distortion at the aft fan face. A range of fan flow rates were tested at tunnel airspeeds from 0 to 240 knots, and angles-of-attack from -10 to 40 deg for all three modes. In addition to the model variables for the three modes, model variants of the top inlet were tested in the parallel mode only. These lip variables were: aft lip boundary layer bleed holes, and Three position turning vane. Also a bellmouth extension of the top inlet side lips was tested in parallel mode.

Simpkin, W. E.↗
NASA NTRS1988

An evaluation of flight path formats head-up and head-down

Flight path primary flight display formats were incorporated on head-up and head-down electronic displays and integrated into an Advanced Concepts Flight Simulator. Objective and subjective data were collected while ten airline pilots evaluated the formats by flying an approach and landing task under various ceiling, visibility and wind conditions. Deviations from referenced/commanded airspeed, horizontal track, vertical track and touchdown point were smaller using the head-up display (HUD) format than the head-down display (HDD) format, but not significantly smaller. Subjectively, the pilots overwhelmingly preferred (1) flight path formats over attitude formats used in current aircraft, and (2) the head-up presentation over the head-down, primarily because it eliminated the head-down to head-up transition during low visibility landing approaches. This report describes the simulator, the flight displays, the format evaluation, and the results of the objective and subjective data.

Sexton, George A.↗
NASA NTRS1986

Optimum full-scale subsonic wind tunnel

The needs and reasons for performing full-scale subsonic research have been studied. Full-scale wind-tunnel requirements are described; recommended size, airspeed, acoustic capabilities, and flow quality are developed; and data-acquisition systems, productivity, automation, and some cost elements are discussed. It is proposed that the optimum full-scale, subsonic wind tunnel be large enough to accommodate aerodynamic and acoustic investigations on most advanced aircraft, which exhibit complex engine/lifting-surface flow-field interactions, including advanced rotorcraft.

Mort, K. W.↗
NASA NTRS2019

Regarding Pilot Usage of Display Technologies for Improving Awareness of Aircraft System States

ed systems and the procedures for ng in complexity. This interacting trend places a larger burden on pilots to manage increasing amounts of information and to understand system interactions. The result is an increase in the likelihood of loss of airplane state awareness (ASA). One way to gain more insight into this issue is through experimentation using objective measures of visual behavior. This study summarizes an analysis of oculometer data obtained during a high-fidelity flight simulation study that included a variety of complex pilot-system interactions that occur in current flight decks, as well as several planned for the next generation air transportation system. The study was comprised of various scenarios designed to induce low and high energy aircraft states coupled with other emulated causal factors in recent accidents. Three different display technologies were evaluated in this recent pilot-in-the-loop study conducted at NASA Langley Research Center. These technologies include a stall recovery guidance algorithm and display concept, an enhanced airspeed control indication of when the automation is no longer actively controlling airspeed, and enhanced synoptic diagrams with corresponding simplified electronic interactive checklists. Multiple data analyses were performed to understand how the 26 participating airline pilots were observing ASA-related information provided during different stag specific events within these stages.

Daniels, Taumi S.↗
NASA NTRS2023

UAM Instrument Flight Procedure Design and Evaluation in the Joby Flight Simulator

NASA’s Advanced Air Mobility (AAM) National Campaign (NC) partnered with Joby Aviation to test and evaluate different developmental candidate Urban Air Mobility (UAM) Instrument Flight Procedure (IFP) designs including new departure, enroute, approach and missed approach architectures using Joby’s high-fidelity engineering aircraft simulator. In conjunction with the simulator testing, this effort also evaluated related aspects such as charting, coding, and adherence to flight planning criteria. The test objectives were to assess the safety, efficiency, passenger comfort and noise of the different variations of the developmental IFPs. Safety-related measures include clearance from terrain and vertical obstructions, procedure flyability, and flight path conformance. Efficiency-related measures included time required, airspace volume required, and battery energy required. Passenger comfort and ride quality measures include roll/pitch angles, roll/pitch attitude change rates, and airspeeds prior to aggressive maneuvers, subjective pilot/passenger responses and acceleration forces. The noise impacts of the different IFPs will be interpolated/extrapolated using data from the simulator fed into a separate Joby acoustic software-based tool. Overall, several tradeoffs were identified and characterized between the different variations of the developmental IFP profiles. No single version of the developmental IFP structure scored highest across all measures listed above; rather, different IFP variations proved optimal for different measures, confirming that the best IFP depends on which specific measures are prioritized for a given aircraft, location and operation.

National Campaign↗
NASA NTRS1985

Interactive aircraft flight control and aeroelastic stabilization

An analytical model of a 3-D airfoil was used to study an optimization procedure formulated to enhance stability of an airfoil through integrated structural and control synthesis. This procedure is discussed together with preliminary results. These results show that a sensitivity derivative approach utilizing structural parameters, weighting matrix parameters and optimal control parameters (in this case, the design airspeed) is effective in determining the best structural/control design.

Weisshaar, T. A.↗