Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aggregates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Alkali-activated slag (AAS) and OPC-based composites containing crumb rubber aggregate: Physico-mechanical properties, durability and oxidation of rubber upon NaOH treatment

Value-added utilization of waste tires in cementitious materials has been studied for decades, whereas the synergy between rubber and alkali-activated cements deserves more investigations. To this end, we compared physico-mechanical and durability properties of alkali-activated slag (AAS) and OPC-based composites containing NaOH-pretreated/as-received crumb rubber (CR). It was found that the incorporation of CR had both positive and negative effects on specimens due to its special attributes. CR reduced electrical conductivity which was associated with the ion transport ability, since it worked as an electrical insulator and increased hydrophobicity of pore walls. The sulfate expansion decreased with CR content because the flow of sulfate ions was demobilized, and the flexibility of CR relieved the internal stress. CR also improved the freeze-thaw durability of composites if the total CR content was less than 30% in specimens. However, the low Young's modulus of CR impaired the compressive strength and failed to effectively control the total shrinkage upon drying. The composites with CR must avoid high temperature exposure which resulted in the pyrolysis of rubber. In addition, the NaOH pretreatment enhanced adhesion between CR and hydrated cement and improved overall performances of composites. The FTIR spectra confirmed the NaOH-induced accelerated oxidation of CR surface and the generation of polar functional groups including carbonyl and carboxyl groups, increasing the total surface energy of rubber. More importantly, the alkali-activation process for AAS could treat the CR aggregate in the meantime, which means the use of CR in alkali-activated cements does not require the pretreatment of CR before blending.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polyphenols Weaken Pea Protein Gel by Formation of Large Aggregates with Diminished Noncovalent Interactions

Polyphenols are well-known native cross-linkers and gel strengthening agents for many animal proteins. However, their role in modifying plant protein gels remains unclear. In this study, multiple techniques were applied to unravel the influence of green tea polyphenols (GTP) on pea protein gels and the underlying mechanisms. We found that the elasticity and viscosity of pea protein gels decreased with increased GTP. The protein backbone became less rigid when GTP was present based on shortened T 1ρ H in relaxation solid-state NMR measurements. Electron microscopy and small-angle X-ray scattering showed that gels weakened by GTP possessed disrupted networks with the presence of large protein aggregates. Solvent extraction and molecular dynamic simulation revealed a reduction in hydrophobic interactions and hydrogen bonds among proteins in gels containing GTP. The current findings may be applicable to other plant proteins for greater control of gel structures in the presence of polyphenols, expanding their utilization in food and biomedical applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Highly Emissive Semi-Ladder-Type Copolymers, Aggregation State, and Solution-Processed Organic Light-Emitting Transistor

An organic light-emitting transistor (OLET) integrates the logic function of a field-effect transistor (FET) with electroluminescence of a light-emitting diode (LED) into a single device. This has the potential to play an important role in smart displays, electrically pumped organic laser, and other flexible electronic devices. For achieving high-performance solution-processed OLET, three semiladder copolymers—TPTI-CC, TPTI-C, and TPTI-F—were developed in this study. It was found that variation in the chemical structure lead to significant differences in energy level, emission color, and intermolecular aggregation. High photoluminescence quantum yields (PLQY) was obtained in these three polymers. Solution-processed trilayered OLET devices were fabricated, which exhibited strong electroluminescence, balanced charge mobility, and external quantum efficiency (EQE) of 2.8%.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Shape Control of Colloidal Semiconductor Nanocrystals through Thermodynamically Driven Aggregative Growth

The optoelectronic properties of colloidal semiconductor nanocrystals (NCs) can be manipulated by changing their geometric shapes. The precise synthetic control over particle morphologies, however, has remained elusive. Conventional growth techniques rely on the kinetic assembly of atomic units, where supersaturation and precipitation processes can lead to a broad distribution of particle shapes. In this paper, we demonstrate that replacing atomic precursors with small-size nanocrystals as building blocks for larger colloids offers an easier, more predictive control over nanoparticle shape evolution. The reported growth strategy is illustrated via shape-selective syntheses of CdSe and CdS NC cubes, spheres, rods, as well as unprecedented “donut” and ring-like structures. Growth of desired particle morphologies was achieved by choosing an appropriate reaction solvent that minimizes the surface free energy through a unique shape formation. This so-called "aggregative growth mechanism" is explained using a thermodynamic model for interacting viscous colloids. We expect that this novel growth strategy will offer a viable platform for shape–selective synthesis of many inorganic colloids, providing pathways to optimizable optoelectronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Radiation-Induced Changes in Single Crystal Calcite and Dolomite: Mineral Analogues of Light Water Reactor, Nuclear Power Plant Concrete Aggregates

Two analogues of aggregates (calcite and dolomite) found in nuclear power plant (NPP) concrete have been neutron irradiated to fluences up to 2 × 10 20 n/cm 2 at 52 °C and 4 × 10 19 n/cm 2 at 95 °C (E > 0.1 MeV). X-ray diffraction studies showed that these aging conditions affected crystallography of both calcite and dolomite, with both showing a growth in their unit cells compared to that of the unirradiated samples. Only dolomite samples showed a continuous increase of its lattice parameters with the increase in irradiation. In calcites, the lattice growth with irradiation dissipated after a fluence of 5 × 10 18 n/cm 2 . Radiation-induced disordering of the crystal structure was observed in both materials, while a healing effect of irradiation temperature was mainly observed in calcites. Dislocation densities calculated by using XRD data also supported these observations. Insights made into the unit cells of both minerals by using Fourier synthesis showed that the Mg sites are more prone to the neutron irradiation than the Ca sites, resulting in larger radiation effects and higher disruption in the crystal structure of dolomite than that of calcite. Furthermore, other than the polycrystalline characteristics observed by using TEM, these minerals did not show complete amorphization or significant structural decomposition at the studied irradiation fluences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Early-Stage Aggregation and Crystalline Interactions of Peptoid Nanomembranes

Fully synthetic peptoid membranes are known to mimic important features of biological membranes, with several advantages over other biomimetic membranes. A fundamental understanding of how the individual peptoid amphiphiles assemble in solution to form the bilayer membrane is key to unlocking their versatility for application in a broad range of processes. Here, in this study, in situ X-ray scattering and molecular dynamics simulations are used to understand the early stages of assembly of three different peptoids that exhibit distinctly different crystallization kinetics. The in situ measurements reveal that the peptoids aggregate first into a nascent phase that is less crystalline than the assembled peptoid membrane. Anisotropic aromatic interactions are determined to be the dominant driving force in the early stages of membrane formation. These results provide key insights into how the peptoid assembly may be manipulated during the early stages of assembly and nucleation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantifying uncertainty in aggregated climate change risk assessments

High-level assessments of climate change impacts aggregate multiple perils into a common framework. This requires incorporating multiple dimensions of uncertainty. Here we propose a methodology to transparently assess these uncertainties within the ‘Reasons for Concern’ framework, using extreme heat as a case study. We quantitatively discriminate multiple dimensions of uncertainty, including future vulnerability and exposure to changing climate hazards. High risks from extreme heat materialise after 1.5–2 °C and very high risks between 2–3.5 °C of warming. Risks emerge earlier if global assessments were based on national risk thresholds, underscoring the need for stringent mitigation to limit future extreme heat risks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

High-fidelity topochemical polymerization in single crystals, polycrystals, and solution aggregates

Topochemical polymerization (TCP) emerges as a leading approach for synthesizing single crystalline polymers, but is traditionally restricted to transformations in solid-medium. The complexity in achieving single-crystal-to-single-crystal (SCSC) transformations due to lattice disparities and the untapped potential of performing TCP in a liquid medium with solid-state structural fidelity present unsolved challenges. Herein, by using X-rays as the primary means to overcome crystal disintegration, we reveal the details of SCSC transformation during the TCP of chiral azaquinodimethane (AQM) monomers through in situ crystallographic analysis while spotlighting a rare metastable crystalline phase. Complementary in situ investigations of powders and thin films provide critical insights into the side-chain dependent polymerization kinetics of solid-state reactions. Furthermore, we enable TCP of AQM monomers in a liquid medium via an antisolvent-reinforced aggregated state, yielding polymer nanofibers with high crystallinity akin to that of solid-state. This study testifies high structural precision of TCP performed in different states and media, offering critical insights into the synthesis of processable nanostructured polymers with desired structural integrity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

CORE: A Global Aggregation Service for Open Access Papers

This paper introduces CORE, a widely used scholarly service, which provides access to the world’s largest collection of open access research publications, acquired from a global network of repositories and journals. CORE was created with the goal of enabling text and data mining of scientific literature and thus supporting scientific discovery, but it is now used in a wide range of use cases within higher education, industry, not-for-profit organisations, as well as by the general public. Through the provided services, CORE powers innovative use cases, such as plagiarism detection, in market-leading third-party organisations. CORE has played a pivotal role in the global move towards universal open access by making scientific knowledge more easily and freely discoverable. In this paper, we describe CORE’s continuously growing dataset and the motivation behind its creation, present the challenges associated with systematically gathering research papers from thousands of data providers worldwide at scale, and introduce the novel solutions that were developed to overcome these challenges. The paper then provides an in-depth discussion of the services and tools built on top of the aggregated data and finally examines several use cases that have leveraged the CORE dataset and services.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

Rotaxane rings promote oblique packing and extended lifetimes in DNA-templated molecular dye aggregates

Abstract Molecular excitons play a central role in natural and artificial light harvesting, organic electronics, and nanoscale computing. The structure and dynamics of molecular excitons, critical to each application, are sensitively governed by molecular packing. Deoxyribonucleic acid (DNA) templating is a powerful approach that enables controlled aggregation via sub-nanometer positioning of molecular dyes. However, finer sub-Angstrom control of dye packing is needed to tailor excitonic properties for specific applications. Here, we show that adding rotaxane rings to squaraine dyes templated with DNA promotes an elusive oblique packing arrangement with highly desirable optical properties. Specifically, dimers of these squaraine:rotaxanes exhibit an absorption spectrum with near-equal intensity excitonically split absorption bands. Theoretical analysis indicates that the transitions are mostly electronic in nature and only have similar intensities over a narrow range of packing angles. Compared with squaraine dimers, squaraine:rotaxane dimers also exhibit extended excited-state lifetimes and less structural heterogeneity. The approach proposed here may be generally useful for optimizing excitonic materials for a variety of applications ranging from solar energy conversion to quantum information science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Foldable semi-ladder polymers: novel aggregation behavior and high-performance solution-processed organic light-emitting transistors

A critical issue in developing high-performance organic light-emitting transistors (OLETs) is to balance the trade-off between charge transport and light emission in a semiconducting material. Although traditional materials for organic light-emitting diodes (OLEDs) or organic field-effect transistors (OFETs) have shown modest performance in OLET devices, design strategies towards high-performance OLET materials and the crucial structure–performance relationship remain unclear. Our research effort in developing cross-conjugated weak acceptor-weak donor copolymers for luminescent properties lead us to an unintentional discovery that these copolymers form coiled foldamers with intramolecular H-aggregation, leading to their exceptional OLET properties. An impressive external quantum efficiency (EQE) of 6.9% in solution-processed multi-layer OLET devices was achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Aggregation-induced phosphorescence sensitization in two heptanuclear and decanuclear gold–silver sandwich clusters

The strategy of aggregation-induced emission enhancement (AIEE) has been proven to be efficient in wide areas and has recently been adopted in the field of metal nanoclusters. Furthermore, the relationship between atomically precise clusters and AIEE is still unclear. Herein, we have successfully obtained two few-atom heterometallic gold–silver hepta-/decanuclear clusters, denoted Au 6 Ag and Au 9 Ag, and determined their structures by X-ray diffraction and mass spectrometry. The nature of the AuI…AgI interactions thereof is demonstrated through energy decomposition analysis to be far-beyond typical closed-shell metal–metal interaction dominated by dispersion interaction. Furthermore, a positive correlation has been established between the particle size of the nanoaggregates and the photoluminescence quantum yield for Au 6 Ag, manifesting AIEE control upon varying the stoichiometric ratio of Au : Ag in atomically-precise clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Condensation and growth of amorphous aluminosilicate nanoparticles via an aggregation process

The precipitation of zeolite nanoparticles involves the initial formation of metastable precursors, such as amorphous entities, that crystallize through non-classical pathways. Here, using reactive force field-based simulations, we reveal how aluminosilicate oligomers grow concomitantly to the decondensation of silicate entities during the initial step of the reaction. Aluminate clusters first form in the solution, thus violating the Loewenstein rule in the first instant of the reaction, which is then followed by their connection with silicate oligomers at the terminal silanol groups before reorganization to finally diffuse within the silicate oligomers to form stable amorphous aluminosilicate nanoparticles that do obey the Loewenstein rule. Our results clearly indicate that aluminate does not serve as the nucleation center for the growth of aluminosilicates in a nucleation-like process but rather proceeds via an aggregation process. Furthermore, the coexistence of aluminosilicate oligomers and small silicate entities induces a phase separation that promotes the precipitation of zeolites with aging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Kinetic processes of phase separation and aggregation behaviors in slot-die processed high efficiency Y6-based organic solar cells

Morphological optimization has proved to be one crucial factor contributing to the 19% efficiency of Y6-based organic solar cells (OSCs). Although the relationship between component miscibility and film morphology has been established, it has not been clarified how the film formation processes proceed, especially for methods compatible with large-area fabrication, i.e. slot-die coating, which restricts the further optimization of the morphology. Herein, we comprehensively investigate the effect of miscibility and the film-formation kinetic process on film morphology during processing with different solvents. A highest power conversion efficiency (PCE) of 17.38% can be obtained in a D18:Y6 device processed with slot-die coating in an open-air environment. However, due to their relatively poor miscibility, incorporating a trace amount of chlorobenzene (CB) into CF can sufficiently promote Y6 aggregation, leading to increased phase separation and thus the average PCE drops to 15.16%. In contrast, a PM6:Y6 blend shows insensitive changes in the kinetic process as well as the final morphology, and thus in the comparable PCEs when cast with different solvents, which is ascribed to their relatively good miscibility. As a result, this work provides scientific guidelines for device optimization by combining the intermediate gap from miscibility to kinetic process and their impact on final morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗