Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Proton Solvation and Transport in Hydrated Nafion

Proton solvation properties and transport mechanisms have been studied in hydrated Nafion using the self-consistent multistate empirical valence bond (SCI-MS-EVB) method that includes the effects excess proton charge defect delocalization and Grotthuss proton hopping. It was found that sulfonate groups influence excess proton solvation, as well as the proton hydration structure, by stabilizing a more Zundel-like (H 5 O 2 + ) structure in their first solvation shells. Hydrate proton-related hydrogen bond networks were observed to be more stable than networks with water alone. Diffusion rates, Arrhenius activation energies, and transport pathways were calculated and analyzed to characterize the nature of the proton transport. Diffusion rate analysis suggests that a proton-hopping mechanism dominates the proton transport for the studied water loading levels and that there is a clear degree of anticorrelation with the vehicular transport. The activation energy drops quickly with an increasing water content when the water loading level is smaller than ~10 H 2 O/SO 3 – , which is consistent with experimental observations. The sulfonate groups were also found to affect the proton hopping directions. The temperature and water content effects on the proton transport pathways were also investigated.

Feng, Shulu↗

Structure and component dynamics in binary mixtures of poly(2-(dimethylamino)ethyl methacrylate) with water and tetrahydrofuran: A diffraction, calorimetric, and dielectric spectroscopy study

We have combined X-ray diffraction, neutron diffraction with polarization analysis, small angle neutron scattering, differential scanning calorimetry, and broad band dielectric spectroscopy to investigate the structure and dynamics of binary mixtures of poly (2-(dimethylamino)ethyl methacrylate) with either water or tetrahydrofuran (THF) at different concentrations. Aqueous mixtures are characterized by a highly heterogeneous structure where water clusters coexist with an underlying nano-segregation of main chains and side groups of the polymeric matrix. THF molecules are homogeneously distributed among the polymeric nano-domains for concentrations of one THF molecule/monomer or lower. A more heterogeneous situation is found for higher THF amounts, but without evidences for solvent clusters. In THF-mixtures, we observe a remarkable reduction of the glass-transition temperature which is enhanced with increasing amount of solvent but seems to reach saturation at high THF concentrations. Adding THF markedly reduces the activation energy of the polymer β-relaxation. The presence of THF molecules seemingly hinders a slow component of this process which is active in the dry state. The aqueous mixtures present a strikingly broad glass-transition feature, revealing a highly heterogeneous behavior in agreement with the structural study. Regarding the solvent dynamics, deep in the glassy state all data can be described by an Arrhenius temperature dependence with a rather similar activation energy. However, the values of the characteristic times are about three orders of magnitude smaller for THF than for water. Water dynamics display a crossover toward increasingly higher apparent activation energies in the region of the onset of the glass transition, supporting its interpretation as a consequence of the freezing of the structural relaxation of the surrounding matrix. The absence of such a crossover (at least in the wide dynamic window here accessed) in THF is attributed to the lack of cooperativity effects in the relaxation of these molecules within the polymeric matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical kinetics parameters and model validation for the gasification of PCEA nuclear graphite

A series of gasification experiments, using two right cylinder specimens (~ 12.7 x 25.4 mm and 25.4 x 25.4 mm) of PCEA nuclear graphite in ambient airflow, measured the total gasification flux at weight losses up to 41.5% and temperatures (893-1015 K) characteristics of those for in-pores gasification Mode (a) and in-pores diffusion-limited Mode (b). The chemical kinetics parameters for the gasification of PCEA graphite are determined using a multi-parameters optimization algorithm from the measurements of the total gasification rate and transient weight loss in experiments. These parameters are: (i) the pre-exponential rate coefficients and the Gaussian distributions and values of specific activation energies for adsorption of oxygen and desorption of CO gas; (ii) the specific activation energy and pre-exponential rate coefficient for the breakup of stable un-dissociated C(O2) oxygen radicals to form stable (CO) complexes; (iii) the specific activation energy and pre-exponential coefficient for desorption of CO2 gas and; (iv) the initial surface area of reactive free sites per unit mass. This area is consistently 13.5% higher than that for nuclear graphite grades of NBG-25 and IG-110 and decreases inversely proportional with the square root of the initial mass of the graphite specimens in the experiments. Experimental measurements successfully validate the chemical-reactions kinetics model that calculates continuous Arrhenius curves of the total gasification flux and the production rates of CO and CO2 gases. The model results at different total weight losses agree well with measurements and expand beyond the temperatures in the experiments to the diffusion-limited mode of gasification. Also calculated are the production rates of CO and CO2 gases and their relative contributions to the total gasification rate in the experiments as functions of temperature, for total weight losses of 5% and 10%.

kinetics↗

Quantum chemical modeling of superbase-catalyzed reactions of acetophenone and methyl mesityl ketone with acetylene

The mechanisms of furan formation and the competitive reaction of 1,5-diketone formation from 1-mesitylbut-2-en-1-one (1a) and 1-phenylbut-2-en-1-one (1b) were studied using the B3LYP/6-311++G**//B3LYP/6-31+G* quantum chemical approach taking into account solvation effects in terms of the IEFPCM model. The addition to 1a of the ethynide ion to form β-acetylene enolate ion (2a) occurs with the activation energy ΔG{sup ≠} = 13.3 kcal mol{sup –1}, while the further intramolecular O-vinylation with the closure of 2a to the dihydrofuran cycle of the dihydrofuran carbanion is the rate-determining step in the reaction pathway of substituted furan formation needing the activation energy G{sup ≠} = 19.5 kcal mol{sup –1}. The alternative addition of the mesitylethenolate ion to 1a to form the 1,5-diketone carbanion is associated with a higher (by 3.4 kcal mol{sup –1}) free activation energy than that of ethynide ion addition. In contrast, in the case of 1b, the addition at the C=C bond of the phenylethenolate ion rather than of the ethynide ion to form the 1,5-diketone carbanion is more preferable, since its activation free energy is 1.5 kcal mol{sup –1} lower. The quantum chemical calculation results are consistent with the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4}-based thin-film photovoltaics

We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se{sub 2} (CIGSe) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ∼400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ∼400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

36 MATERIALS SCIENCE↗

Characterization of nanostructured photosensitive (NiS){sub x}(CdS){sub (1-x)} composite thin films grown by successive ionic layer adsorption and reaction (SILAR) route

Highlights: {yields} Thin films of (NiS){sub x}(CdS){sub (1-x)} with variable composition (x = 1 to 0) were deposited onto glass substrates by the successive ionic layer adsorption and reaction (SILAR) method. {yields} The structural, surface morphological and electrical characterizations of the as deposited and annealed films were studied. {yields} The bandgap and activation energy of annealed (NiS){sub x}(CdS){sub (1-x)} film decrease with improvement in photosensitive nature. -- Abstract: Recently ternary semiconductor nanostructured composite materials have attracted the interest of researchers because of their photovoltaic applications. Thin films of (NiS){sub x}(CdS){sub (1-x)} with variable composition (x = 1-0) had been deposited onto glass substrates by the successive ionic layer adsorption and reaction (SILAR) method. As grown and annealed films were characterised by X-ray diffraction, scanning electron microscopy and EDAX to investigate structural and morphological properties. The (NiS){sub x}(CdS){sub (1-x)} films were polycrystalline in nature having mixed phase of rhombohedral and hexagonal crystal structure due to NiS and CdS respectively. The optical and electrical properties of (NiS){sub x}(CdS){sub (1-x)} thin films were studied to determine compsition dependent bandgap, activation energy and photconductivity. The bandgap and activation energy of annealed (NiS){sub x}(CdS){sub (1-x)} film decrease with improvement in photosensitive nature.

36 MATERIALS SCIENCE↗

The aircraft energy efficiency active controls technology program

Broad outlines of the NASA Aircraft Energy Efficiency Program for expediting the application of active controls technology to civil transport aircraft are presented. Advances in propulsion and airframe technology to cut down on fuel consumption and fuel costs, a program for an energy-efficient transport, and integrated analysis and design technology in aerodynamics, structures, and active controls are envisaged. Fault-tolerant computer systems and fault-tolerant flight control system architectures are under study. Contracts with leading manufacturers for research and development work on wing-tip extensions and winglets for the B-747, a wing load alleviation system, elastic mode suppression, maneuver-load control, and gust alleviation are mentioned.

Hood, R. V., Jr.↗

High-Temperature Creep Behavior of Thin-Walled FeCrAl Alloy Tubes

This report summarizes measured creep properties for FeCrAl alloy C26M measured using subsized specimens machined from prototypic thin-walled tubes. A representative tube fabricated in a previous large batch production effort was machined into dual-gauge axial specimens using electrical-discharge machining. Creep tests, comprising strain-rate jump tests (SRJ), jump stress (JS) and constant-stress (CS) tests, were conducted at temperatures ranging from 600-900ºC to determine creep mechanisms (elucidated from stress exponents) and activation energies to compare with prior data available in the literature at temperatures up to 650ºC. It was found that the results from the SRJ tests indicated that the highest stress exponent of 5.8 occurred at 600ºC, which decreased to the lowest stress exponent of 2.5 at 700ºC. At higher temperatures, the stress exponents increased slightly to a range of 2.9 to 4.3 between 750ºC and 900ºC. The high stress exponent value of 5.8 suggested dislocation glide creep mechanisms dominated creep deformation at 600ºC since high stress values were measured. The low stress exponent of 2.5 at 700ºC suggested diffusional creep mechanisms start to occur that aid in dislocation cross-slip and climb mechanisms. The slightly higher stress exponents of 2.9 to 3.9 may suggest different contributions of creep deformation mechanisms based on diffusional processes associated with Nabarro-Herring and Coble creep and dislocation creep that involve thermally activated cross-slip and climb mechanisms. These deformation mechanisms could have also been affected by the development of recovery and/or recrystallization processes in the microstructure of the C26M2 specimens. From the SJ and single CS tests, two sets of creep activation energies were calculated. The steady state creep values obtained from the SJ tests showed several abnormalities especially with the data at 850ºC. The comparison of the creep activation energies between the data from the SJ and CS tests showed higher creep rates for the SJ tests than the CS tests, indicating microstructure softening occurred in the C26M2 specimens during the SJ tests that led to the higher creep rates at stresses above the initial stress of 10 MPa. For the CS tests, the results showed steady increases in MCR with increasing temperature at each stress. The best linear fit to the MCR values at each stress was with data obtained at 800ºC, 850ºC and 900ºC. The lowest Q c value of 130.8 KJ/mole was observed with the highest stress of 25 MPa. As stress was lowered, the Q c values increased continuously to the highest value of 188.2 KJ/mole at 10 MPa. This trend suggests that the dominant creep mechanism is diffusional based dislocation climb since the decreasing activation energies with increasing stress promotes easier dislocation climb around obstacles. The comparison between the SJ and CS tests indicates that the best type of creep test performed on FeCrAl alloys such as C26M2 is the single CS test.

36 MATERIALS SCIENCE↗

Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films

Here, the synthesis temperature dependent phase formation of Ni 10 Ti 10 Al 25 Fe 35 Cr 20 thin films is compared to a bulk processed sample of identical composition. The as-cast alloy exhibits a dual-phase microstructure which is composed of a disordered BCC phase and AlNiTi-based B2- and/or L2 1 -ordered phase(s). Formation of the BCC phase as well as an ordered AlNi-based B2 phase is observed for a thin film synthesised at 500 °C (ratio of synthesis temperature of thin film to melting temperature of bulk alloy: T/T m = 0.49), which is attributed to both surface and bulk diffusion mediated growth. Post deposition annealing at 900 °C (T/T m = 0.75) of a thin film deposited without intentional heating results in the formation of NiAlTi-based B2 and/or L2 1 -phase(s) similar to the bulk sample, which is attributed to bulk diffusion. Depositions conducted at room temperature without intentional substrate heating (T/T m = 0.20) resulted in the formation of an X-ray amorphous phase, while a substrate temperature increase to 175 °C (T/T m = 0.28) causes the formation of a BCC phase. Atom probe tomography of the thin films deposited without intentional substrate heating and at 175 °C indicates the formation of ~5 nm and ~10 nm FeAl-rich domains, respectively. This can be rationalized based on the activation energy for surface diffusion, as Ti and Ni exhibt 2.5 to 4 times larger activation energy barriers than Al, Fe and Cr. It is evident from the homologous temperature that the phase formation observed at 500 °C (T/T m = 0.49) is a result of both surface and bulk diffusion. As the temperature is reduced, the formation of FeAl-rich domains can be understood based on the differences in activation energy for surface diffusion and is consistent with kinetically limited thin film growth.

36 MATERIALS SCIENCE↗

A Comparison of combustion of coal chars in O{sub 2}/CO{sub 2} and O{sub 2}/N{sub 2} mixtures - isothermal TGA studies - article no. A74

Two chars prepared from parent coals of a high volatile bituminous coal and an anthracite coal were subjected to isothermal combustion tests in a thermogravimetric analyser (TGA). The chars were burned in mixtures of O{sub 2}/CO{sub 2} and O{sub 2}/N{sub 2} with O{sub 2} concentrations of 3%, 6%, 10%, 21% and 30% and combustion temperature ranging from 723 K to 1163 K. Experimental results show that replacing the inert nitrogen gas in the oxidizer with CO{sub 2} has little influence on the measured reactivity of coal chars under conditions of the experiments. The measured reactivity of each char was found to be approximately first order (0.88 - 0.90) to the concentration of O{sub 2} in the O{sub 2}/CO{sub 2} mixtures. As char combustion tests were conducted under relatively high temperatures conditions, internal and external effectiveness factors were estimated in order to derive combustion kinetics of both chars. The values of activation energy for both chars, obtained by taking account of both the internal and external effectiveness factors (i.e. with correction), were very much in line with the literature data. The activation energy of the bituminous coal char combustion in O{sub 2}/CO{sub 2} was found to be 96323 (without correction) - 108893 (with correction) kJ/kmol within the temperature range of 723 - 873 K, whereas the activation energy of the anthracite char was found to be 125716 (without correction) - 140486 (with correction) kJ/kmol within the temperature range of 773 - 973 K.

01 COAL, LIGNITE, AND PEAT↗

Influence of measurement temperature on the luminescence properties of (113) defects in oxygen-implanted silicon

Influence of the measurement temperature in the range 5–130 K on the photoluminescence spectra of (113) defects in Si implanted with 350-keV oxygen ions at doses of 3.7 × 10{sup 14} cm{sup –2} and annealed at a temperature of 700°C for 1 h in a chlorine-containing atmosphere is studied. The temperature dependence of the line intensity is characterized by portions of intensity increase with an activation energy of 23.1 meV and intensity quenching with activation energies of 41.9 and 178.3 meV. With increasing temperature, the lines are shifted to longer wavelengths and their FWHM increases.

36 MATERIALS SCIENCE↗

Insights into co-pyrolysis of polyethylene terephthalate and polyamide 6 mixture through experiments, kinetic modeling and machine learning

The non-isothermal pyrolysis of polyethylene terephthalate (PET), polyamide 6 (PA6), and their mixtures was studied in a thermogravimetric analyzer at different heating rates. Temperature of maximum decomposition (T max ) decreased by 25–45 °C and 35–55 °C for the PET:PA6 mixtures (3:1, 1:1, 1:3) compared to PET and PA6, respectively. The kinetic analysis was initially carried out using isoconversional method. However, the dependency of activation energy on conversion was observed for the co-pyrolysis of PET and PA6 that suggested the occurrence of multi-step reactions in the mixtures. Distributed activation energy model (DAEM) was used in this study to describe the multistep reactions occurring during pyrolysis of PET:PA6 mixtures. Here, in this work, a four-parallel reaction DAEM was developed to describe the pyrolysis kinetics of PET:PA6 mixtures. The apparent mean activation energies (E o ) for PET, PA6, and mixtures varied in the range of 244–255, 140–215, and 138–255 kJ mol –1 , respectively. The mass loss profiles of PET and PA6 mixtures were also modeled using artificial neural network (ANN). Out of 155 ANN models, the best prediction was made by ANN511 with R 2 greater than 0.997 for both test and unseen data. The interaction effects observed through TGA experiments and subsequent kinetic analysis were further assessed in terms of product composition using analytical pyrolysis coupled with gas chromatograph/mass spectrometer (Py-GC/MS). Co-pyrolysis of PET and PA6 resulted in the formation of new aromatic compounds with nitrogen-containing functional groups, which were not detected when PET or PA6 were pyrolyzed individually.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation kinetics of SPS-densified U 3 Si 2 fuels—Microstructure impact

Here, U 3 Si 2 is a potential candidate for accident tolerant fuels because of its high uranium density and excellent thermal conductivity in comparison to UO 2 . However, U 3 Si 2 suffers from oxidation, steam corrosion, and subsequent disintegration/pulverization. The detailed investigation of kinetics that incorporates fundamental treatment of oxidation of U 3 Si 2 is scarcely reported, and the oxidation mechanisms have not been fully elucidated. In this paper, the oxidation behavior of microcrystalline (mc - ) and nanocrystalline (nc - ) U 3 Si 2 have been systematically investigated using a thermogravimetric analysis (TGA) apparatus through a series of isothermal and non-isothermal kinetic studies. The isothermal kinetic study with a model-fitting approach indicates oxidation activation energy of 85 kJ/mol for dense mc - U 3 Si 2 and 96.4 kJ/mol for nc - U 3 Si 2 pellets, while the isoconversional approach leads to an activation energy in the range of 70–85 kJ/mol for mc - U 3 Si 2 and 75–86 kJ/mol for nc - U 3 Si 2 with three most common model-free methods, including Kissinger–Akahira–Sunose, Flynn–Wall–Ozawa, and Friedman methods. The derivation of oxidation activation energies using both isothermal and isoconversional methods highlights the approach to evaluate the oxidation resistance of nuclear materials using TGA quantitatively and makes it possible to compare among various nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dielectric relaxation of gamma irradiated muscovite mica

Highlights: • The present article reports the effect of gamma irradiation on the dielectric relaxation characteristics of muscovite mica. • Dielectric and electrical relaxations have been analyzed in the framework of dielectric permittivity, electric modulus and Cole–Cole formalisms. • The frequency dependent electrical conductivity has been rationalized using Johnsher’s universal power law. • The experimentally measured electric modulus and conductivity data have been fitted using Havriliak–Negami dielectric relaxation function. - Abstract: In the present research, the dielectric relaxation of gamma irradiated muscovite mica was studied in the frequency range of 0.1 Hz–10 MHz and temperature range of 653–853 K, using the dielectric permittivity, electric modulus and conductivity formalisms. The dielectric constants (ϵ′ and ϵ′′) are found to be high for gamma irradiated muscovite mica as compared to the pristine sample. The frequency dependence of the imaginary part of complex electric modulus (M′′) and dc conductivity data conforms Arrhenius law with single value of activation energy for pristine sample and two values of activation energy for gamma irradiated mica sample. The experimentally assessed electric modulus and conductivity information have been interpreted by the Havriliak–Negami dielectric relaxation explanation. Using the Cole–Cole framework, an analysis of real and imaginary characters of the electric modulus for pristine and gamma irradiated sample was executed which reflects the non-Debye relaxation mechanism.

36 MATERIALS SCIENCE↗

Room-temperature thermally induced relaxation effect in a two-dimensional cyano-bridged Cu-Mo bimetal assembly and thermodynamic analysis of the relaxation process

We observed a photo-switching effect in [Cu{sup II}(1,4,8,11-tetraazacyclodecane)]{sub 2}[Mo{sup IV}(CN){sub 8}]{center_dot}10H{sub 2}O by irradiation with 410-nm light around room temperature using infrared spectroscopy. This photo-switching is caused by the photo-induced charge transfer from Mo{sup IV} to Cu{sup II}. The photo-induced phase thermally relaxed to the initial phase with a half-life time of 2.7 Multiplication-Sign 10{sup 1}, 6.9 Multiplication-Sign 10{sup 1}, and 1.7 Multiplication-Sign 10{sup 2} s at 293, 283, and 273 K, respectively. The relaxation process was analyzed using Hauser's equation, k=k{sub 0}exp[-(E{sub a}+E{sub a}{sup *}{gamma}) /k{sub B}T], where k is the rate constant of relaxation, k{sub 0} is the frequency factor, E{sub a} is the activation energy, E{sub a}{sup *} is the additional activation energy due to the cooperativity, and {gamma} is the fraction of the photo-induced phase. k{sub 0}, E{sub a}, and E{sub a}{sup *} were evaluated as 1.28 Multiplication-Sign 10{sup 7}{+-} 2.6 s{sup -1}, 4002 {+-} 188 cm{sup -1}, and 546 {+-} 318 cm{sup -1}, respectively. The value of E{sub a} is much larger than that of the relaxation process for the typical light-induced spin crossover effect (E{sub a} Almost-Equal-To 1000 cm{sup -1}). Room-temperature photo-switching is an important issue in the field of optical functional materials. The present system is useful for the demonstration of high-temperature photo-switching material.

36 MATERIALS SCIENCE↗

Temperature admittance spectroscopy of boron doped chemical vapor deposition diamond

Precision admittance spectroscopy measurements over wide temperature and frequency ranges were carried out for chemical vapor deposition epitaxial diamond samples doped with various concentrations of boron. It was found that the experimentally detected boron activation energy in the samples decreased from 314 meV down to 101 meV with an increase of B/C ratio from 600 to 18000 ppm in the gas reactants. For the heavily doped samples, a transition from thermally activated valence band conduction to hopping within the impurity band (with apparent activation energy 20 meV) was detected at temperatures 120–150 K. Numerical simulation was used to estimate the impurity DOS broadening. Accurate determination of continuously altering activation energy, which takes place during the transformation of conduction mechanisms, was proposed by numerical differentiation of the Arrhenius plot. With increase of boron doping level the gradual decreasing of capture cross section from 3 × 10{sup −13} down to 2 × 10{sup −17} cm{sup 2} was noticed. Moreover, for the hopping conduction the capture cross section becomes 4 orders of magnitude less (∼2 × 10{sup −20} cm{sup 2}). At T > T{sub room} in doped samples the birth of the second conductance peak was observed. We attribute it to a defect, related to the boron doping of the material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calorimetric, spectroscopic and structural investigations of phase polymorphism in [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3}. Part I

Four crystalline phases of the coordination compound [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3} are identified by adiabatic calorimetry. Three phase transitions, one at T{sub C3}(IV{yields}III)=30.7 K, the second at T{sub C2}(III{yields}II)=91.7 K (both accompanied by comparable entropy changes 3.0 and 3.1 J K{sup -1} mol{sup -1}, respectively) and the third at T{sub C1}(II{yields}I)=241.6 K (accompanied by an entropy change of 8.1 J K{sup -1} mol{sup -1}) were discovered. X-ray single crystal diffraction (at 293 K) demonstrates that phase I is a highly dynamic disordered cubic phase (Fm3{sup Macron }m, No. 225) with two types of BF{sub 4}{sup -} anions differing in a degree of disorder. In phase II (at 170 K) the structure remains cubic (Ia3{sup Macron }, No. 206), with two different types of cations and four different types of anions. Splitting of certain IR bands connected with NH{sub 3} ligands at the observed phase transitions suggests a lowering of the symmetry of the [Ru(NH{sub 3}){sub 6}]{sup 3+} complex cation. Both NH{sub 3} ligands and BF{sub 4}{sup -} anions perform fast reorientations ({tau}{sub R} Almost-Equal-To 10{sup -12} s), which are significantly slowed down below the phase transition at T{sub C3}. {sup 1}H NMR studies led to estimate the values of the activation energy of NH{sub 3} ligands reorientation in the phases II and I as equal to {approx}8 kJ mol{sup -1}. In phase I the whole hexammineruthenium(III) cations reorientation as a tumbling process can be noticed. The activation energy value of this motion is {approx}24 kJ mol{sup -1}. {sup 19}F NMR studies give the values of the activation energy of BF{sub 4}{sup -} anions reorientation as {approx}6 kJ mol{sup -1}. Above the phase transition temperature half of BF{sub 4}{sup -} anions perform a tumbling motion with E{sub a} Almost-Equal-To 8 kJ mol{sup -1}. - Graphical abstract: A series of complementary methods, such as Adiabatic Calorimetry, Differential Scanning Calorimetry, Fourier Transform-Far and Middle Spectroscopy, proton and fluorine Nuclear Magnetic Resonance and structural methods reveal information about phase transitions in [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3}. Highlights: Black-Right-Pointing-Pointer Three novel phase transitions are found in [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3}. Black-Right-Pointing-Pointer The thermodynamic parameters of the phase transitions are derived. Black-Right-Pointing-Pointer The transitions are of order-disorder type. Black-Right-Pointing-Pointer The complex belongs to Fm3{sup Macron }m at 293 K and its symmetry changes to Ia3{sup Macron} at 170 K. Black-Right-Pointing-Pointer [Ru(NH{sub 3}){sub 6}](BF{sub 4}){sub 3} is a highly dynamically disordered crystal.

36 MATERIALS SCIENCE↗