Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Sample-Averaged Biexciton Quantum Yield Measured by Solution-Phase Photon Correlation

The brightness of nanoscale optical materials such as semiconductor nanocrystals is currently limited in high excitation flux applications by inefficient multiexciton fluorescence. We have devised a solution-phase photon correlation measurement that can conveniently and reliably measure the average biexciton-to-exciton quantum yield ratio of an entire sample without user selection bias. This technique can be used to investigate the multiexciton recombination dynamics of a broad scope of synthetically underdeveloped materials, including those with low exciton quantum yields and poor fluorescence stability. Here in this study, we have applied this method to measure weak biexciton fluorescence in samples of visible-emitting InP/ZnS and InAs/ZnS core/shell nanocrystals, and to demonstrate that a rapid CdS shell growth procedure can markedly increase the biexciton fluorescence of CdSe nanocrystals.

36 MATERIALS SCIENCE↗

Tripled yield in direct-drive laser fusion through statistical modelling [Tripling the yield in direct-drive laser fusion via predictive statistical modeling]

Focusing laser light onto a very small target can produce the conditions for laboratory-scale nuclear fusion of hydrogen isotopes. The lack of accurate predictive models, which are essential for the design of high-performance laser-fusion experiments, is a major obstacle to achieving thermonuclear ignition. Here we report a statistical approach that was used to design and quantitatively predict the results of implosions of solid deuterium–tritium targets carried out with the 30-kilojoule OMEGA laser system, leading to tripling of the fusion yield to its highest value so far for direct-drive laser fusion. When scaled to the laser energies of the National Ignition Facility (1.9 megajoules), these targets are predicted to produce a fusion energy output of about 500 kilojoules—several times larger than the fusion yields currently achieved at that facility. As a result, this approach could guide the exploration of the vast parameter space of thermonuclear ignition conditions and enhance our understanding of laser-fusion physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Biomass Feedstocks for Renewable Fuel Production: A review of the impacts of feedstock and pretreatment on the yield and product distribution of fast pyrolysis bio-oils and vapors

Renewable transportation fuels from biomass have the potential to substantially reduce greenhouse gas emissions and diversify global fuel supplies. Thermal conversion by fast pyrolysis converts up to 75% of the starting plant material (and its energy content) to a bio-oil intermediate suitable for upgrading to motor fuel. Woody biomass, by far the most widely-used and researched material, is generally preferred in thermochemical processes due to its low ash content and high quality bio-oil produced. However, the availability and cost of biomass resources, e.g. forest residues, agricultural residues, or dedicated energy crops, vary greatly by region and will be key determinates in the overall economic feasibility of a pyrolysis-to-fuel process. Formulation or blending of various feedstocks, combined with thermal and/or chemical pretreatment, could facilitate a consistent, high-volume, lower-cost biomass supply to an emerging biofuels industry. However, the impact of biomass type and pretreatment conditions on bio-oil yield and quality, and the potential process implications, are not well understood. This literature review summarizes the current state of knowledge regarding the effect of feedstock and pretreatments on the yield, product distribution, and upgradability of bio-oil.

09 BIOMASS FUELS↗

Status of the analysis of the pp{yields}pp({eta} {yields}3{pi}{sup 0}) reaction

The first production run of WASA-at-COSY carried out in April 2007 was focused on the {eta}{yields}3{pi}{sup 0} decay. The Dalitz plot of the {eta}{yields}3{pi}{sup 0} decay will be reconstructed and the slope parameter {alpha} will be extracted with high statistics. Here preliminary results of the analysis are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Physics of {eta}{sup '}{yields}{pi}{sup +}{pi}{sup -}{eta} and {eta}{sup '}{yields}{pi}{sup +}{pi}{sup -}{pi}{sup 0} decays

The article describes experimental status of the {eta}{sup '}{yields}{pi}{sup +}{pi}{sup -}{eta} and {eta}{sup '}{yields}{pi}{sup +}{pi}{sup -}{pi}{sup 0} dcays. A theoretical framework used for description of the decays mechanism is also reviewed. The possibilities for the measurements with WASA-at-COSY are mentioned.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

PIENU experiment at TRIUMF: Measurement of {pi}{yields}e{nu}/{pi}{yields}{mu}{nu} branching ratio

A TRIUMF experiment, PIENU, which aims to measure the branching ratio of pion decays, R {gamma}({pi}{yields}e{nu}+e{nu}{gamma})/{gamma}({pi}{yields}{mu}{nu}+{mu}{nu}{gamma}) to a precision of 0.1% or better is described. Such a measurement provides the best test of electron-muon universality in weak interactions and is sensitive to an effective mass scale of up to 1000 TeV in new physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fusion-neutron-yield, activation measurements at the Z accelerator: Design, analysis, and sensitivity

We present a general methodology to determine the diagnostic sensitivity that is directly applicable to neutron-activation diagnostics fielded on a wide variety of neutron-producing experiments, which include inertial-confinement fusion (ICF), dense plasma focus, and ion beam-driven concepts. This approach includes a combination of several effects: (1) non-isotropic neutron emission; (2) the 1/r{sup 2} decrease in neutron fluence in the activation material; (3) the spatially distributed neutron scattering, attenuation, and energy losses due to the fielding environment and activation material itself; and (4) temporally varying neutron emission. As an example, we describe the copper-activation diagnostic used to measure secondary deuterium-tritium fusion-neutron yields on ICF experiments conducted on the pulsed-power Z Accelerator at Sandia National Laboratories. Using this methodology along with results from absolute calibrations and Monte Carlo simulations, we find that for the diagnostic configuration on Z, the diagnostic sensitivity is 0.037% ± 17% counts/neutron per cm{sup 2} and is ∼ 40% less sensitive than it would be in an ideal geometry due to neutron attenuation, scattering, and energy-loss effects.

43 PARTICLE ACCELERATORS↗

Maximizing neutron yields by scaling hollow diameter of a dense plasma focus anode [Neutron yield maximization and anode surface damage characterization by scaling hollow diameters of a DPF anode]

Experiments were performed to maximize the neutron yield from a 2 kJ dense plasma focus (DPF) and characterize the amount of copper sputtered from the surface of an anode by varying the diameter of the anodes’ on-axis hollow. The hollow is a void in the copper material along the longitudinal axis of the anode. All the anodes had an outer diameter of 1.2 in. and the diameter of the hollow varied from 0 in. (no hollow) to 1 in. The anodes with a hollow produced a greater number of neutrons per discharge than the anode without a hollow. Over 40 discharges, the hollow anode that yielded the most neutrons (9.1±0.4×10 6 neutrons per discharge produced with the 0.75 in. hollow) produced >6 times more neutrons than the anode with no hollow. A qualitative observation of the anodes after 130 discharges showed less surface damage on anodes with a larger hollow. Quantitative sputter measurements were performed by characterizing the amount of copper sputtered onto on-axis quartz targets for three newly machined anodes, each with a particular hollow diameter. The quantitative results matched the qualitative observations: the copper sputter was reduced using larger hollows. Finally, the largest hollow sputtered 17±1.0 nm/sr/discharge of copper, a reduction of 69% compared to the anode with the most damage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of the N*(1535) in the J/{psi}{yields}p{eta}p and J/{psi}{yields}pK{sup +}{lambda} reactions

We study the J/{psi}{yields}p{eta}p and J/{psi}{yields}pK{sup +}{lambda} reactions with a unitary chiral approach. We find that the unitary chiral approach, which generates the N*(1535) dynamically, can describe the data reasonably well, particularly the ratio of the integrated cross sections. This study provides further support for the unitary chiral description of the N*(1535). We also discuss some subtle differences between the coupling constants determined from the unitary chiral approach and those determined from phenomenological studies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Precision measurements of the pp{yields}{pi}{sup +}pn and pp{yields}{pi}{sup +}d reactions: Importance of long-range and tensor force effects

Inclusive measurements of pion production in proton-proton collisions in the forward direction were undertaken at 400 and 600 MeV at the cooler synchrotron (COSY) at Forschungszentrum Julich using the Big Karl spectrograph. The high resolution in the {pi}{sup +} momentum ensured that there was an unambiguous separation of the pp{yields}{pi}{sup +}d/{pi}{sup +}pn channels. Using these and earlier data, the ratio of the production cross sections could be followed through the {delta} region and compared with the predictions of final state interaction theory. Deviations are strongly influenced by long-range terms in the production operator and the tensor force in the final pn system. These have been investigated in a realistic pp{yields}{pi}{sup +}d/{pi}{sup +}pn calculation that includes S<-->D channel coupling between the final nucleons. A semiquantitative understanding of the observed effects is achieved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Direct measurements of the non-DD cross section {sigma}{sub {psi}}{sub (3770){yields}}{sub non-DD} at E{sub cm}=3.773 GeV and the branching fraction for {psi}(3770){yields}non-DD

By analyzing the data collected at the center-of-mass energy E{sub cm}=3.773 GeV and below the DD meson pair production threshold with the BES-II detector at the BEPC Collider, we directly measured the observed non-DD cross section of {psi}(3770) decay to be {sigma}{sub {psi}}{sub (3770){yields}}{sub non-DD}{sup obs}=(0.95{+-}0.35{+-}0.29) nb at E{sub cm}=3.773 GeV, and the branching fraction BF[{psi}(3770){yields}non-DD]=(13.4{+-}5.0{+-}3.6)% for inclusive non-DD decay of {psi}(3770). We also determined the cross section for DD meson pair production to be {sigma}{sub DD}{sup obs}=(6.12{+-}0.37{+-}0.23) nb at E{sub cm}=3.773 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spacelike and timelike form factors for {omega}{yields}{pi}{gamma}* and K*{yields}K{gamma}* in the light-front quark model

We investigate space- and timelike form factors for {omega}{yields}{pi}{gamma}* and K*{yields}K{gamma}* decays using the light-front quark model constrained by the variational principle for the QCD-motivated effective Hamiltonian. The momentum dependent spacelike form factors are obtained in the q{sup +}=0 frame and then analytically continued to the timelike region. Our prediction for the timelike form factor F{sub {omega}}{sub {pi}}(q{sup 2}) is in good agreement with the experimental data. We also find that the spacelike form factor F{sub K*{sup {+-}}K{sup {+-}}}(Q{sup 2}) for charged kaons encounters a zero because of the negative interference between the two currents to the quark and the antiquark.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cross sections of e{sup +}e{sup -}{yields}{gamma}VV and e{sup +}e{sup -}{yields}{gamma}{gamma}V

Cross sections of the e{sup +}e{sup -} annihilate into one photon and two vector mesons, such as J/{psi}{rho}, J/{psi}{phi}, and {rho}{phi} at the center of mass energy {radical}(s)=10.58 GeV are calculated. These shed light on the measurement of the e{sup +}e{sup -} annihilation cross section via radiative return in B factories. At another center of mass energy {radical}(s)=3.097 GeV, namely, the J/{psi} resonance peak, the cross sections for the processes e{sup +}e{sup -}{yields}{gamma}VV and e{sup +}e{sup -}{yields}{gamma}{gamma}V (with V being {rho}, {omega}, or {phi}) are calculated with similar methods. These calculations give an estimation of the background levels in the study of radiative or double radiative decays of J/{psi}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

K{yields}{pi} and K{yields}0 in 2+1 flavor partially quenched chiral perturbation theory

We calculate results for K{yields}{pi} and K{yields}0 matrix elements to next-to-leading order in 2+1 flavor partially quenched chiral perturbation theory. Results are presented for both the {delta}I=1/2 and 3/2 channels, for chiral operators corresponding to current-current, gluonic penguin, and electroweak penguin 4-quark operators. These formulas are useful for studying the chiral behavior of currently available 2+1 flavor lattice QCD results, from which the low-energy constants of the chiral effective theory can be determined. The low-energy constants of these matrix elements are necessary for an understanding of the {delta}I=1/2 rule, and for calculations of {epsilon}{sup '}/{epsilon} using current lattice QCD simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charmonium production in e{sup +}e{sup -}{yields}{psi}+X(cc) and e{sup +}e{sup -}{yields}D*D{sub J}

The dominance of {chi}{sub 0} in the data for e{sup +}e{sup -}{yields}{psi}+{chi}{sub J}(cc) is shown to violate Okubo-Zweig-Iizuka rule factorization. Single gluon exchange gives a nonfactorizing effective S{center_dot}L interaction that generates a large scalar production amplitude. This also has observable effects near threshold in e{sup +}e{sup -}{yields}D{sup (*)}D{sub J}, where enhancements of D*D{sub 0} and DD{sub 1} channels are predicted. Further tests and implications are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evasion of helicity selection rule in {chi}{sub c1{yields}}VV and {chi}{sub c2{yields}}VP via intermediate charmed meson loops

The hadronic decays of {chi}{sub c1{yields}}VV and {chi}{sub c2{yields}}VP are supposed to be suppressed by the helicity selection rule in the perturbative QCD framework. With an effective Lagrangian method, we show that the intermediate charmed meson loops can provide a mechanism for the evasion of the helicity selection rule, and result in sizeable decay branching ratios in some of those channels. The theoretical predictions can be examined by the forthcoming BES-III data in the near future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗