Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind tunnel experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Unsteady surface pressure distributions on a delta wing undergoing large amplitude pitching motions

Wind tunnel experiments were performed on a 70-deg-sweep delta wing to determine the effect of a sinusoidal pitching motion on the pressure field on the suction side of the wing. Pressure taps were placed from 35-90 percent of the chord, at 60 percent of the local semi-span. Pressure coefficients were measured as functions of Reynolds number and pitch rate. The surface pressure distribution was seen to vary at the same frequency as the pitching frequency, though distortion due to the vortex breakdown was observed. Comparing the upstroke (angle of attack increasing) and downstroke (angle of attack decreasing) pressures for a specific angle of attack, a time lag in the pressure distribution was observed. The downstroke pressures were slightly larger at the forward chord locations. Vortex breakdown was seen to have the most significant effect at the 40-45-percent chord location, where an increase in local pressure was apparent, as well as a distortion of the periodic pressure fluctuation.

Thompson, S. A.↗

Using transonic small disturbance theory for predicting the aeroelastic stability of a flexible wind-tunnel model

The CAP-TSD (Computational Aeroelasticity Program-Transonic Small Disturbance) code, developed at the NASA-Langley Research Center, is applied to the Active Flexible Wing (AFW) wind-tunnel model for prediction of the model's transonic aeroelastic behavior. Static aeroelastic solutions using CAP-TSD are computed. Dynamic (flutter) analyses are then performed as perturbations about the static aeroelastic deformations of the AFW. The accuracy of the static aeroelastic procedure is investigated by comparing analytical results to those from previous AFW wind-tunnel experiments. Dynamic results are presented in the form of root loci at different Mach numbers for a heavy gas and air. The resultant flutter boundaries for both gases are also presented. The effects of viscous damping and angle-of-attack, on the flutter boundary in air, are presented as well.

Silva, Walter A.↗

Experimental aeroelasticity - History, status and future in brief

The National Aeronautics and Space Administration (NASA) conducts wind-tunnel experiments to determine and understand the aerolastic characteristics of new and advanced flight vehicles, including fixed-wing, rotary-wing, and space-launch configurations. Review and assessments are made of the state-of-the-art in experimental aeroelasticity regarding available facilities, measurement techniques, and other means and devices useful in testing. In addition, some past experimental programs are described which assisted in the development of new technology, validated new analysis codes, or provided needed information for clearing flight envelopes of unwanted aeroelastic response. Finally, needs and requirements for advances and improvements in testing capabilities for future experimental research and development programs are described.

Ricketts, Rodney H.↗

Visualization of supercomputer simulations in physics

A description is given of the hardware and software tools and techniques in use at NASA's Numerical Aerodynamic Simulation Facility for visualization of computational fluid dynamics. The hardware consists of high-performance graphics workstations connected to the supercomputer with high-bandwidth lines, a frame buffer connected to the supercomputer with UltraNet, a digital video recording system, and film recorders. The software permits the scientist to view the three-dimensional scenes dynamically, to zoom into a region of interest, and to rotate his viewing position to study any region of interest in more detail. The software also provides automated animation and video recording of the scenes. The digital effects unit on the video system facilitates comparison of computer simulations with flight or wind tunnel experiments.

Watson, Val↗

Coherent structures in a boundary layer and shear layer of a turbulent backward-facing step flow

A wind tunnel experiment has been carried out at the NASA Ames Research Center to analyze the evolution of coherent structures from a boundary layer to a shear layer in a turbulent, backward-facing, step flow. A miniature X-wire/cold-wire probe has been used in conjunction with two arrays of cold wires, one aligned in the plane of main shear and the other in the spanwise direction of the flow, to detect and characterize delta-scale organized structures in the outer regions of the flow and to provide detailed information concerning these structures. Kinematic features of the events associated with the large scale structures were analyzed and topological pictures of the evolving flow, as well as the contributions to the Reynolds shear stress components are presented.

Jovic, Srba↗

Aerodynamic applications of infrared thermography

A series of wind tunnel experiments were conducted as part of a systematic study for evaluation of infrared thermography as a viable non-intrusive thermal measurement technique for aerodynamic applications. The experiments consisted of obtaining steady-state surface temperature and convective heat transfer rates for a uniformly heated cylinder in transverse flow with a Reynolds number range of 46,000 to 250,000. The calculated convective heat transfer rates were in general agreement with classical data. Furthermore, IR thermography provided valuable real-time fluid dynamic information such as visualization of flow separation, transition and vortices.

Daryabeigi, Kamran↗

Delta wing surface pressures for high angle of attack maneuvers

A wind tunnel experiment was performed on a delta wing with a leading edge sweep of 70 deg. Unsteady pressures were measured on the suction surface of the wing as it was oscillated from 0-30 deg, and 2-60 deg angle-of-attack. Pressure coefficients were measured at different surface locations for two pitch rates. Static pressure measurements were also obtained for comparison with the dynamic results. The Reynolds number was fixed at 420,000, based on the centerline chord length. Pressure measurements were made from 35-90 percent of the chord, along a ray from the apex at 60 percent of the local semispan. Spanwise measurements were also made at a constant chord location, x/c = 75 percent from the apex. The unsteady pressure data over the 0-30 deg angle-of-attack range showed pressures fluctuating in phase with model motion, and little overshoot from the static values. The pressures for the large amplitude motion showed large overshoots from the static values. In addition, during the high angle-of-attack portion of the motion, the upstroke (angle of attack increasing) pressure coefficients were typically much lower than the downstroke values. For the lower pitch rate, there was little difference between upstroke and downstroke pressures at the low angles of attack.

Thompson, S. A.↗

Multiple vortex and shock interactions at subsonic, transonic, and supersonic speeds

A wind tunnel experiment was conducted at subsonic, transonic, and supersonic speeds of the vortex-vortex and vortex-shock interactions about a tailless, general research fighter model having chine-like forebody strakes faired into a 55 deg cropped delta wing. The present paper isolates the results obtained at angle of attack 20 deg and free-stream Mach = 0.6 to 1.6, which include off-surface and on-surface flow visualizations, two-component laser velocimeter measurements, and wing upper surface static pressure distributions. Increasing the Mach number decreased the direct interaction (intertwining) of the forebody strake and wing vortex cores. An early bursting of the wing vortex occurred at free-stream Mach = 0.8, where the flow field was in transition from the intertwining vortices characteristic of the lower subsonic speeds to the decoupled vortices at the transonic and supersonic speeds. The vortex interaction and breakdown were sensitive to the character of the secondary boundary layer separation on the wing, which may be shock-induced at free-stream Mach = 0.8 to 0.95.

Erickson, Gary E.↗

Influence of free stream turbulence on a trailing line vortex

Low-speed wind tunnel experiments have been conducted to investigate the influence of free stream turbulence on the mean behavior of a trailing line vortex. Perforated plates and screens were used to produce turbulence levels ranging between 0.03 percent and 5 percent of the free stream velocity in the vicinity of the vortex generator. Smoke was used to provide a visual image of the vortex and photographic and videotape records were taken. Experiments have shown that high turbulence levels cause vortices to meander but with little evidence of structural change. At lower turbulence intensities, some types of vortex oscillations were observed which suggest possible instabilities.

Ash, Robert L.↗

Theoretical and experimental investigation of the aeroelastic stability of an advanced bearingless rotor in hover and forward flight

The aeroelastic stability of a shaft-fixed, 1/8th Froude scaled bearingless rotor was investigated in a series of wind tunnel experiments simulating a wide range of operating conditions. A finite element formulation was used to perform a parallel theoretical analysis, with the goal of determining whether a bearingless rotor system could be made aeroelastically stable without the incorporation of auxilliary dampers. A quick estimate of lag mode damping was provided by a refined moving-block analysis implemented in real time which predicted similar damping values. Model rotor and blade properties were also determined, and these properties were used as inputs for a newly refined bearingless rotor analysis. Predicted results were compared with experimental results in hover and forward flight. Results indicated that soft pitch link stiffness increases pitch-lag coupling and stabilizes lag mode stability in hover and at low advance ratios, but destabilizes at higher advance ratios.

Wang, James M.↗

Navier-Stokes solutions for flows related to store separation

The objective is developing CFD capabilities to obtain solutions for viscous flows about generic configurations of internally and externally carried stores. The emphasis is placed on the supersonic flow regime with extensions being made to the transonic regime. The project is broken into four steps: (1) Cavity flows for internal carriage configurations; (2) High angle of attack flows, which may be experienced during the separation of the stores: (3) Flows about a body near a flat plate for external carriage configurations; and (4) Flows about a body inside or in the proximity of a cavity. Three-dimensional unsteady cavity flow solutions are obtained by an explicit, MacCormack algorithm, EMCAV3, for open, close, and transitional cavities. High angle of attack flows past cylinders are solved by an implicit, upwind algorithm. All the results compare favorably with the experimental data. For flows about multiple body configurations, the Chimera embedding scheme is modified for finite-volume and multigrid algorithms, MaGGiE. Then a finite volume, implicit, upwind, multigrid Navier-Stokes solver which uses on overlapped/embedded and zonal grids, VUMXZ3, is developed from the CFL3D code. Supersonic flows past a cylinder near a flat plate are computed using this code. The results are compared with the experimental data. Currently the VUMXZ3 code is being modified to accomplish step 4 of this project. Wind tunnel experiments are also being conducted for validation purposes.

Baysal, Oktay↗

CFD analysis for high speed inlets

The increased national interest in high speed flight has increased research for high speed propulsion components. The highly 3-D flows present in supersonic/hypersonic inlets are currently being studied at NASA-Lewis both experimentally and computationally using a family of steady Parabolized Navier-Stokes (PNS) and Navier-Stokes (NS) solvers and unsteady NS solvers. Some of the results of these efforts are presented with an emphasis on the comparison of the computational and experimental results. The flow in high speed inlets typically involves the interaction of compression shock waves and boundary layers on the internal surfaces. The fundamentals of these interactions have been studied experimentally for many years, while more recently, computations have been used to study these complex 3-D flow fields. Attempts to control the flow through boundary layer bleed are being investigated computationally prior to wind tunnel experiments. The ultimate goal is the higher performing inlets required for high speed flight.

Benson, Tom↗

Development of high-lift wing modifications for an advanced capability EA-6B aircraft

NASA-Langley has been in a development program aimed at improvements of the EA-6B electronic countermeasures aircraft's maneuvering capabilities; one objective of this effort is the investigation of relatively simple wing design modifications which could yield improved low speed high lift performance with minimum degradation of higher-speed performance. Various two- and three-dimensional low speed and transonic CFD techniques have accordingly been used during the design effort, which involved leading-edge slat and trailing-edge flap contour evaluations by both computation and wind tunnel experiment. Significant low-speed maximum-lift enhancements were obtained without cruise-speed deterioration.

Waggoner, Edgar G.↗

Theoretical and experimental study of unsteady rotor/body aerodynamic interactions

A systematic study is made of the unsteady interactions between a rotor and a body in order to assess the degree of sophistication necessary to accurately predict the unsteady pressure signatures on a helicopter fuselage due to the rotor and its wake. Experimental measurements and theoretical calculations were both made in order to clarify the nature of the unsteady interactions and to define the limitations of potential flow theory in modeling the various phenomena. An attempt is made to accurately model the geometry of vortex/surface interactions as well as to include the appropriate unsteady terms in the analysis. Unsteady pressure measurements from a series of wind tunnel experiments are also provided. Such data has allowed new conlusions on the nature of body pressure signatures which are due to blade passage effects, close wake interactions, and wake inmpingement on the fuselage. It is also concluded that the flowfield about the body is highly unsteady and cannot be modeled without the inclusion of the unsteady terms in the calculation of the local surface pressures and that theoretical modeling is still possible over most of the flow field using an unsteady inviscid analysis.

Crouse, G. L.↗

Predicting the aeroelastic behavior of a wind-tunnel model using transonic small disturbance theory

The CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) code, developed at the NASA-Langley Research Center, is applied to the Active Flexible Wing (AFW) wind-tunnel model for prediction of the model's transonic aeroelastic behavior. Static aeroelastic solutions using CAP-TSD are computed. Dynamic (flutter) analyses are then performed as perturbations about the static aeroelastic deformations of the AFW. The accuracy of the static aeroelastic procedure is investigated by comparing analytical results to those from AFW wind-tunnel experiments. Dynamic results are presented in the form of root loci at different Mach numbers for a heavy gas and for air test mediums. The resultant flutter boundaries for both gases, and the effects of viscous damping and angle of attack on the flutter boundary in air, are also presented.

Silva, Walter A.↗

A novel boundary layer sensor utilizing domain switching in ferroelectric liquid crystals

This paper describes the design and the principles of operation of a novel sensor for the optical detection of a shear stress field induced by air or gas flow on a rigid surface. The detection relies on the effects of shear-induced optical switching in ferroelectric liquid crystals. It is shown that the method overcomes many of the limitations of similar measuring techniques including those using cholesteric liquid crystals. The present method offers a preferred alternative for flow visualization and skin friction measurements in wind-tunnel experiments on laminar boundary layer transition investigations. A theoretical model for the optical response to shear stress is presented together with a schematic diagram of the experimental setup.

Parmar, D. S.↗

Transition research opportunities at subsonic and transonic speeds

A number of opportunities available to experimentalists in the subsonic- and transonic-flow regime is discussed, including the needs for improving the quality of flow in wind tunnels and the techniques used to measure it. Attention is focused on uncertainties in transition data obtained in wind-tunnel experiments, methods of flow quality improvements, relationships between Reynolds-number effects and flow quality, spanwise pressure gradient, and active transition control. Advances in stability theory and Navier-Stokes simulations are outlined, along with measurement/instrument needs, advantages of momentum-thickness transition criteria, and the effects of laminar flow on the induced drag of a wing.

Bobbitt, Percy J.↗

Secondary frequencies in the wake of a circular cylinder with vortex shedding

A detailed numerical study of two-dimensional flow past a circular cylinder at moderately low Reynolds numbers was conducted using three different numerical algorithms for solving the time-dependent compressible Navier-Stokes equations. It was found that if the algorithm and associated boundary conditions were consistent and stable, then the major features of the unsteady wake were well-predicted. However, it was also found that even stable and consistent boundary conditions could introduce additional periodic phenomena reminiscent of the type seen in previous wind-tunnel experiments. However, these additional frequencies were eliminated by formulating the boundary conditions in terms of the characteristic variables. An analysis based on a simplified model provides an explanation for this behavior.

Abarbanel, Saul S.↗