Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “weak diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

248 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Multiple magnetic interactions and large inverse magnetocaloric effect in TbSi and TbSi 0.6 Ge 0.4

We present a comprehensive investigation of the electronic structure, magnetization, specific heat, and crystallography of TbSi (FeB structure type) and TbSi 0.6 ⁢Ge 0.4 (CrB structure type) compounds. Both TbSi and TbSi 0.6 ⁢Ge 0.4 exhibit two antiferromagnetic (AFM) transitions at T N⁢1 ≈ 58 and 57 K, and T N⁢2 ≈ 36 and 44 K, respectively, along with an onset of weak metamagneticlike transition around 6 T between T N⁢1 and T N⁢2 . High-resolution specific heat (C P ) measurements show the second- and first-order nature of the magnetic transition at T N⁢1 and T N⁢2 , respectively, for both samples. However, in the case of TbSi, the low-temperature (LT) AFM to high-temperature (HT) AFM transition takes place via an additional AFM phase at the intermediate temperature (IT), where both LT to IT AFM and IT to HT AFM phase transitions exhibit a first-order nature. Both TbSi and TbSi 0.6 ⁢Ge 0.4 manifest significant magnetic entropy changes (Δ⁢S M ) of 9.6 and 11.6 J/kg-K, respectively, for Δ⁢μ 0 ⁢H=7 T, at T N⁢2 . The HT AFM phase of TbSi 0.6 ⁢Ge 0.4 is found to be more susceptible to the external magnetic field, causing a significant broadening in the peaks of Δ⁢S M curves at higher magnetic fields. Temperature- and field-dependent specific-heat data have been utilized to construct the complex HT phase diagram of these compounds. As a result, temperature-dependent x-ray diffraction measurements demonstrate substantial magnetostriction and anisotropic thermal expansion of the unit cell in both samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Semi-empirical quantum optics for mid-infrared molecular nanophotonics

Nanoscale infrared (IR) resonators with sub-diffraction limited mode volumes and open geometries have emerged as new platforms for implementing cavity quantum electrodynamics at room temperature. The use of IR nanoantennas and tip nanoprobes to study strong light–matter coupling of molecular vibrations with the vacuum field can be exploited for IR quantum control with nanometer spatial and femtosecond temporal resolution. In order to advance the development of molecule-based quantum nanophotonics in the mid-IR, we propose a generally applicable semi-empirical methodology based on quantum optics to describe light–matter interaction in systems driven by mid-IR femtosecond laser pulses. The theory is shown to reproduce recent experiments on the acceleration of the vibrational relaxation rate in infrared nanostructures. It also provides physical insights on the implementation of coherent phase rotations of the near-field using broadband nanotips. We then apply the quantum framework to develop general tip-design rules for the experimental manipulation of vibrational strong coupling and Fano interference effects in open infrared resonators. We finally propose the possibility of transferring the natural anharmonicity of molecular vibrational levels to the resonator near-field in the weak coupling regime to implement intensity-dependent phase shifts of the coupled system response with strong pulses and develop a vibrational chirping model to understand the effect. The semi-empirical quantum theory is equivalent to first-principles techniques based on Maxwell’s equations, but its lower computational cost suggests its use as a rapid design tool for the development of strongly coupled infrared nanophotonic hardware for applications ranging from quantum control of materials to quantum information processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Carbon sequestration into lime-stabilized soils: Engineering and mineralogical characterization

Stabilizing weak clayey soils with lime is an effective method for improving the mechanical properties of soil. However, lime production is an energy-intensive process producing significant CO 2 emissions in lime-stabilized soils, which can be counteracted through accelerated carbonation that enhances its engineering performance. The present study evaluates accelerated carbonation of lime-treated soils by adding gaseous (CO 2 -rich gas), liquid (water-CO 2 mixture), and solid (sodium bicarbonate) CO 2 sources. Results indicated that samples carbonated with gaseous CO 2 exhibited 100% lime carbonation, while samples treated with solid and aqueous sources of CO 2 had a mean lime carbonation of 60% and 40%, respectively. Further, all lime-treated-carbonated samples exhibited a mean 50% increase in unconfined compressive strength compared to the untreated samples after a 7-day curing period. Durability evaluation through cyclic wetting and drying indicated that the carbonated samples had higher durability than the untreated samples. X-ray computed tomography showed that adding solid and liquid sources of CO 2 facilitated the flocculation of montmorillonite, reducing the porosity. However, a higher dosage of solid CO 2 induced clay dispersion, increasing the porosity. X-ray diffraction and thermogravimetric analysis verified CO 2 sequestration through the formation of calcite, a thermodynamically stable polymorph of calcium carbonate.

58 GEOSCIENCES↗
DOE OSTI2022

Site dependence of the magnetocaloric effect in Mn 5–x Fe x Si 3

The nuclear and magnetic structures of Mn 3 Fe 2 Si 3 are investigated in the temperature range from 20 to 300 K. The magnetic properties of Mn 3 Fe 2 Si 3 were measured on a single crystal. The compound undergoes a paramagnetic to antiferromagnetic transition at T N2 ≃ 120 K and an antiferromagnetic to antiferromagnetic transition at T N1 ≃ 69 K. A similar sequence of magnetic phase transitions is found for the parent compound Mn 5 Si 3 upon temperature variation, but the field-driven transition observed in Mn 5 Si 3 is not found in Mn 3 Fe 2 Si 3 , resulting in a strongly reduced magnetocaloric effect. Structurally, the hexagonal symmetry found for both compounds under ambient conditions is preserved in Mn 3 Fe 2 Si 3 through both magnetic transitions, indicating that the crystal structure is only weakly affected by the magnetic phase transition, in contrast to Mn 5 Si 3 where both transitions distort the nuclear structure. Both compounds feature a collinear high-temperature magnetic phase AF2 and transfer into a non-collinear phase AF1 at low temperature. While one of the distinct crystallographic sites remains disordered in the AF2 phase in the parent compound, the magnetic structure in the AF2 phase involves all magnetic atoms in Mn 3 Fe 2 Si 3 . These observations imply that the distinct sites occupied by the magnetic atoms play an important role in the magnetocaloric behaviour of the family.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deformed spin- 1 2 square lattice in antiferromagnetic NaZnVOPO 4 ( HPO 4 )

In this work, we report the structural and magnetic properties of a new spin-$\frac{1}{2}$ antiferromagnet NaZnVOPO 4 (HPO 4 ) studied via x-ray diffraction, magnetic susceptibility, high-field magnetization, specific heat, and 31 P nuclear magnetic resonance (NMR) measurements, as well as density-functional band-structure calculations. While thermodynamic properties of this compound are well described by the J 1 – J 2 square-lattice model, ab initio calculations suggest a significant deformation of the spin lattice. From fits to the magnetic susceptibility we determine the averaged nearest-neighbor and second-neighbor exchange couplings of $\bar{J}$ 1 ≃ – 1.3 K and $\bar{J}$ 2 ≃ 5.6 K , respectively, resulting in the effective frustration ratio α = $\bar{J}$ 2 – $\bar{J}$ 1 ≃ – 4.3 that implies columnar antiferromagnetic order as the ground state. Experimental saturation field of 15.3 T is consistent with these estimates if 20% spatial anisotropy in J 1 is taken into account. Specific heat data signal the onset of a magnetic long-range order at T N ≃ 2.1 K , which is further supported by a sharp peak in the NMR spin-lattice relaxation rate. The NMR spectra mark the superposition of two P lines due to two nonequivalent P sites where the broad line with the strong hyperfine coupling and short T 1 is identified as the P(1) site located within the magnetic planes, while the narrow line with the weak hyperfine coupling and long T 1 is designated as the P(2) site located between the planes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Kinetically Controlled Formation of Semi-crystalline Conjugated Polymer Nanostructures

Conjugated polymer (CP) materials that are considered as an attractive choice for various electronic and optoelectronic applications possess highly heterogeneous complex structures that can span several orders of magnitude in length scale. This is due to the intricate coupling effects of weak secondary interactions and entropic forces that determine molecular organization in bulk polymer materials. Understanding the influence of molecular interactions on the emergence and evolution of nano- and microscale structures is of paramount importance to the guided design and development of condensed CP materials. Such understanding is even more critical for the rational design of hierarchical systems away from equilibrium, where weak molecular interactions can guide the system along competing kinetic pathways toward local energy minima and metastable architectures. In this work, we studied a promising concept for accessing various kinetically stabilized semi-crystalline CP nanostructures that are formed in the process of controlled chain-growth Kumada catalyst-transfer polymerization initiated by a small-molecule catalytic species which can exist in equilibrium between free and aggregated states. Specifically, we chose a small-molecule perylenedicarboximide (PDCI) polymerization catalytic initiator which has a strong tendency toward reversible supramolecular assembly–disassembly that can be controlled by temperature. Addition of a thiophene monomer to a solution of the PDCI initiator starts the chain-growth polymerization process, which produces distinct nanoscale semi-crystalline polythiophene structures formed under predominant kinetic control. Furthermore, we demonstrated that, depending on the reaction temperature (which affects the fine balance between the position of PDCI assembly–disassembly equilibrium, rate of polymerization, and solvent–solute interactions for the growing polythiophene chains), a range of kinetically trapped hierarchically organized semi-crystalline CP systems with substantially varying optoelectronic properties could be obtained. In addition to spectroscopic and electron microscopic studies, in order to better reveal the structural aspects of the generated polymer nanoscale systems, we carried out a series of X-ray diffraction and neutron scattering experiments which indicated complex hierarchical organization in these kinetically stabilized CP assembled materials. We expect that this in situ polymerization-based approach can lead to a general way to expand access to various semi-crystalline CP nanostructured materials with broadly tunable electronic and optical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural stability, elemental ordering, and transport properties of layered ScTaN 2

Ternary transition metal (TM) nitrides have gained significant attention in thin film research due to their promising properties for a broad range of applications. Particularly, some of the ternary TM nitrides have been predicted to adopt layered structures that make them interesting for thermoelectric conversion and quantum materials applications. Unfortunately, synthesis of TM ternary nitride films by physical vapor deposition often favors disordered 3D structures rather than the predicted 2D-like layered structure. In this study, we investigate the structural interplay in the Sc-Ta-N ternary system using a combinatorial approach. Combinatorial libraries S⁢c 𝑥 ⁢T⁢a 1−𝑥 ⁢N are synthesized following a two-step method: First, deposit film precursors by cosputtering and then process the resulting 3D-structured samples with rapid thermal annealing. Synchrotron grazing-incidence wide-angle x-ray scattering on films annealed at 1200 ⁢°⁢C for 20 min leads to the nucleation of ScTaN 2 layered structure (𝑃⁢6 3 /𝑚⁢𝑚⁢𝑐) near stoichiometry. We find that the layered structure can accommodate large off-stoichiometry in the Ta-rich region (𝑥 < 0.5), facilitated by the alloying with quasi-isostructural Ta 5 ⁢N 6 compound that exists on a composition tie line at 𝑥 = 0. While focusing on ScTaN 2 , we estimate the long-range order parameter in near-stoichiometric films to be 0.86, corresponding to a fraction of Sc/Ta antisites of 7%. Transport measurements on ScTaN 2 reveal a nearly temperature-independent high carrier density (10 21 c⁢m −3 ), suggesting a heavily doped semiconductor or semimetallic character, consistent with a small positive Seebeck coefficient of +19 µV/K. The carrier mobility at 2 K is relatively small (9.5c⁢m 2 V −1 s −1 ) and the residual-resistivity ratio is minor, suggesting that electrical conduction is dominated by defects or disorder. Measured magnetoresistance suggests possible weak antilocalization at 2 K. This paper highlights the interplay between ScTaN 2 and Ta 5 ⁢N 6 crystal structures in stabilizing layered materials, emphasizes the importance of cation order/disorder for potential tunable alloys, and suggests that ScTaN 2 is a promising platform for exploring electronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Heterogeneous Ice Growth in Micron-Sized Water Droplets Due to Spontaneous Freezing

Understanding how ice nucleates and grows into larger crystals is of crucial importance for many research fields. The purpose of this study was to shed light on the phase and structure of ice once a nucleus is formed inside a metastable water droplet. Wide-angle X-ray scattering (WAXS) was performed on micron-sized droplets evaporatively cooled to temperatures where homogeneous nucleation occurs. We found that for our weak hits ice grows more cubic compared to the strong hits that are completely hexagonal. Due to efficient heat removal caused by evaporation, we propose that the cubicity of ice at the vicinity of the droplet’s surface is higher than for ice formed within the bulk of the droplet. Moreover, the Bragg peaks were classified based on their geometrical shapes and positions in reciprocal space, which showed that ice grows heterogeneously with a significant population of peaks indicative of truncation rods and crystal defects. Frequent occurrences of the (100) reflection with extended in-planar structure suggested that large planar ice crystals form at the droplet surface, then fracture into smaller domains to accommodate to the curvature of the droplets. Planar faulting due to misaligned domains would explain the increased cubicity close to the droplet surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Revealing the Crystalline Architecture of Semicrystalline Ion Exchange Membranes for the Design of Conductive and Durable Alkaline Anion Exchange Membranes

Alkaline anion exchange membrane (AAEM) fuel cells offer a cost-effective alternative to proton exchange membrane (PEM) fuel cells by eliminating the need for expensive precious metal catalysts. In both PEMs and AAEMs, semicrystalline polymers are a common choice, as the crystalline domains can act as mechanical reinforcements that limit swelling and promote mechanical durability in the material. However, spatially resolved characterization of crystalline organization in ion exchange membranes beyond ensemble-averaged X-ray scattering is underrepresented, likely in part due to ionization damage limitations in soft materials. Here, in this study, we resolve the nanometer-size crystallites in semicrystalline ion exchange membranes by applying cryogenic four-dimensional scanning transmission electron microscopy (cryo-4D-STEM) along with data-processing algorithms designed to optimize signals at a low dose to minimize radiation damage. We investigate the effects of synthesis components, including molecular weight and thermal treatment, on a model system of AAEMs in comparison to Nafion, the most commonly used and commercially successful PEM today. We find that excess water uptake in polymer membranes, a property directly associated with weak mechanical durability and with possible negative impacts on ion conductivity, can be reduced by over 30% by varying the polymer's crystalline morphology through changes in synthesis parameters such as molecular weight and thermal history. Our results indicate that this improvement is correlated with smaller crystalline domains with a more homogeneous distribution. More broadly, these results demonstrate how the crystalline architecture of polymer membranes can be tuned through their chemistry and thermal treatment in order to improve their conductivity and durability for commercial fuel cell performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thermal Conductivity of β-Phase Ga 2 O 3 and (Al x Ga 1– x ) 2 O 3 Heteroepitaxial Thin Films

Heteroepitaxy of β-phase gallium oxide (β-Ga 2 O 3 ) thin films on foreign substrates shows promise for the development of next-generation deep ultraviolet solar blind photodetectors and power electronic devices. In this work, the influences of the film thickness and crystallinity on the thermal conductivity of ($\bar{2}01$)-oriented β-Ga 2 O 3 heteroepitaxial thin films were investigated. Unintentionally doped β-Ga 2 O 3 thin films were grown on c-plane sapphire substrates with off-axis angles of 0° and 6° toward $\langle$$11\bar{2}0$$\rangle$ via metal–organic vapor phase epitaxy (MOVPE) and low-pressure chemical vapor deposition. The surface morphology and crystal quality of the β-Ga 2 O 3 thin films were characterized using scanning electron microscopy, X-ray diffraction, and Raman spectroscopy. The thermal conductivities of the β-Ga 2 O 3 films were measured via time-domain thermoreflectance. The interface quality was studied using scanning transmission electron microscopy. The measured thermal conductivities of the submicron-thick β-Ga 2 O 3 thin films were relatively low as compared to the intrinsic bulk value. The measured thin film thermal conductivities were compared with the Debye–Callaway model incorporating phononic parameters derived from first-principles calculations. The comparison suggests that the reduction in the thin film thermal conductivity can be partially attributed to the enhanced phonon-boundary scattering when the film thickness decreases. They were found to be a strong function of not only the layer thickness but also the film quality, resulting from growth on substrates with different offcut angles. Growth of β-Ga 2 O 3 films on 6° offcut sapphire substrates was found to result in higher crystallinity and thermal conductivity than films grown on on-axis c-plane sapphire. However, the β-Ga 2 O 3 films grown on 6° offcut sapphire exhibit a lower thermal boundary conductance at the β-Ga 2 O 3 /sapphire heterointerface. In addition, the thermal conductivity of MOVPE-grown ($\bar{2}01$)-oriented β-(Al x Ga 1–x ) 2 O 3 thin films with Al compositions ranging from 2% to 43% was characterized. Because of phonon-alloy disorder scattering, the β-(Al x Ga 1–x ) 2 O 3 films exhibit lower thermal conductivities (2.8–4.7 W/m∙K) than the β-Ga 2 O 3 thin films. The dominance of the alloy disorder scattering in β-(Al x Ga 1–x ) 2 O 3 is further evidenced by the weak temperature dependence of the thermal conductivity. This work provides fundamental insight into the physical interactions that govern phonon transport within heteroepitaxially grown β-phase Ga 2 O 3 and (Al x Ga 1–x ) 2 O 3 thin films and lays the groundwork for the thermal modeling and design of β-Ga 2 O 3 electronic and optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isolated spin ladders in 𝐿⁢𝑛 2 ⁢Ti 9 ⁢Sb 11 (𝐿⁢𝑛 :La–Nd) metals

Here we present the discovery and characterization of a series of antimonides 𝐿⁢𝑛 2 ⁢Ti 9⁢ Sb 11 (Ln: La–Nd) that exhibit well-isolated, 𝑛 = 2 rare-earth spin ladders. We discuss the structure of these compounds, with a particular focus on the magnetic Ln spin ladders. Nd 2 ⁢Ti 9 ⁢Sb 11 and Ce 2 ⁢Ti 9 ⁢Sb 11 exhibit antiferromagnetic interactions and a well-defined doublet ground state, whereas Pr 2 ⁡Ti 9⁢ Sb 11 exhibits a weakly magnetic singlet ground state. Nd 2 ⁢Ti 9 ⁢Sb 11 is a poor metal with an electrical resistivity of 0.1m⁢Ω cm at 300 K and weak temperature dependence. The thermal conductivity along the ladder exhibits significant field dependence even at 40 K, considerably higher than the magnetic ordering temperature of 1.1 K. Compared to compounds with transition metal spin ladders, the rare-earth elements impart much lower energy scales, making these compounds highly tunable with external stimuli like magnetic fields. In conclusion, the diverse magnetism of the rare-earth ions and Ruderman-Kittel-Kasuya-Yosida interactions further contribute to the potential for a wide array of rich magnetic ground states, positioning these materials as a rare example of an inorganic square spin-ladder platform.

Crystal growth↗
DOE OSTI2026

Dynamics and thermodynamics of the 𝑆 = $\frac{5}{2}$ almost Heisenberg triangular lattice antiferromagnet K 2⁢ Mn⁢(SeO 3 ) 2

Here, we report calorimetric, magnetic, and neutron scattering studies on an 𝑆 = 5/2, nearly Heisenberg triangular-lattice antiferromagnet K 2 ⁢Mn⁢(SeO 3 ) 2 with weak XXZ easy-axis anisotropy. Multiple magnetic phases are identified, including a noncollinear Y phase in zero field, a field-induced collinear 𝑚 = 1/3 magnetization plateau, and a high-field V phase. In the Y phase, the magnetic excitation spectrum exhibits both single-magnon excitations and an extended high-energy continuum. Both features are well described by nonlinear spin wave theory. In the field-induced phases, complex effects of the spectrum renormalization even for large 𝑆 = 5/2 material are clearly detectable. These results underscore the essential role of magnon-magnon interactions in the dynamics of large-𝑆 Heisenberg spin systems on a triangular lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Magnetic properties of metastable honeycomb KCoAsO 4

We present comprehensive neutron scattering data on polycrystalline samples of a new metastable honeycomb material KCoAsO 4 . Below 𝑇 𝑁 = 14 K, the system orders into a zigzag antiferromagnetic state, with spins ordered into alternating ferromagnetic chains similar to the isostructural sister compound KNiAsO 4 . In the case of KCoAsO 4 , we find the moments are robustly canted out of plane closer to the crystallographic 𝑐 axis. A combination of weak interlayer coupling, lattice strain, and inhomogeneities lead to the coexistence of two magnetic ordering wave vectors 𝑘 1 = (1.5 0 0) and 𝑘 2 = (0.5 0 0.5), where the two structures differ only in their layer stacking. Inelastic data show the presence of a spin orbital mode at 24 meV, supporting a pseudospin $\tilde{𝑆}$ = 1/2 Kramer's doublet ground state of the Co 2+ ions. We model the low energy excitations using both a conventional XXZ Hamiltonian and generalized Kitaev Heisenberg Hamiltonian within a linear spin wave limit. While either model can qualitatively reproduce the observed spectra, the lack of fine features and observation of disorder prevent a clear-cut determination of the low energy Hamiltonian. In the case of an XXZ-type model, a large easy-axis anisotropy is necessary to reproduce the gapped spectra and canting of the magnetic moments. For the generalized Kitaev model, despite the large canting of the moments away from the honeycomb layers, we find a noticeable if nondominant Kitaev term persists. In conclusion, the contrast of the magnetic properties of KCoAsO 4 to other cobalt honeycombs highlights the sensitivity of the low energy magnetic properties of Co 2+ to fine details of its crystalline environment.

Honeycomb lattice↗