Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveform analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Yield Estimation of the August 2020 Beirut Explosion by Using Physics‐Based Propagation Simulations of Regional Infrasound

Abstract The August 2020 Beirut explosion is the largest single‐fired ammonium nitrate explosion documented in history. The massive explosion excited loud infrasound in the atmosphere, and clear waveforms were recorded by a regional infrasound array at an epicentral distance of 100 km, allowing for accurate measurements of explosion energy. We estimate the explosion size based on the infrasound waveform inversion. Unlike conventional inversions using empirical models, we perform full 3‐D finite‐difference simulations to obtain a physics‐based propagation model for the inversion. Accurate numerical modeling of infrasound is challenging as the propagation is substantially affected by the turbulent atmosphere. Instead of a single deterministic prediction, we provide a range of waveform predictions by running multiple simulations with stochastic weather forecast models, which allows for comprehensive uncertainty analysis of numerical modeling and estimated yields. Finally, we expand the yield estimation technique for seismoacoustic analysis and demonstrate the substantial advantage of the joint approach.

58 GEOSCIENCES↗
DOE OSTI2020

The influence of irregular terrain on infrasonic propagation in the troposphere

The relations describing the reflection of three-dimensional acoustic ray paths impinging on a non-flat surface are derived and used to approximate the propagation of infrasonic signals over irregular terrain in the geometric limit. The influence of non-flat ground is strongest for those paths that reflect off the surface multiple times, such as those in the tropospheric waveguide; however, notable differences in source and receiver elevations for stratospheric and thermospheric paths can produce notable differences in travel times and arrival amplitudes. The interaction of ray paths with topographical features is investigated using a simple hill to demonstrate the impact of topography on propagation within an azimuthal plane, as well as cases in which the ground surface interaction deflects the path out of the azimuthal plane. Finally, broadband waveform predictions are compared with observations for an event in the western U.S., and a statistical analysis of scattering losses due to interaction with topography in the limit of geometric acoustics is used to improve the agreement between predicted and observed infrasonic signals.

47 OTHER INSTRUMENTATION↗
NASA NTRS1988

Nondestructive evaluation by acousto-ultrasonics

Acousto-ultrasonics is an ultrasonic technique that was originally devised to cope with the particular problems associated with nondestructive evaluation (NDE) of fiber/polymer composite structures. The fiber/polymer composites are more attenuating to ultrasound than any other material presently of interest. This limits the applicability of high-frequency ultrasonics. A common use of ultrasound is the imaging of flaws internal to a structure by scattering from the interface with the flaw. However, structural features of composites can scatter ultrasound internally, thus obscuring the flaws. A need relative to composites is to be able to nondestructively measure the strength of laminar boundaries in order to assess the integrity of a structure. Acousto-ultrasonics has exhibited the ability to use the internal scattering to provide information for determining the strength of laminar boundaries. Analysis of acousto-ultrasonic signals by the wave ray paths that compose it leads to waveform partitioning that enhances the sensitivity to mechanical strength parameters.

Kautz, Harold E.↗
NASA NTRS1990

Unsteady blade surface pressures on a large-scale advanced propeller - Prediction and data

An unsteady three dimensional Euler analysis technique is employed to compute the flowfield of an advanced propeller operating at an angle of attack. The predicted blade pressure waveforms are compared with wind tunnel data at two Mach numbers, 0.5 and 0.2. The inflow angle is three degrees. For an inflow Mach number of 0.5, the predicted pressure response is in fair agreement with data: the predicted phases of the waveforms are in close agreement with data while the magnitudes are underpredicted. At the low Mach number of 0.2 (take-off) the numerical solution shows the formation of a leading edge vortex which is in qualitative agreement with measurements. However, the highly nonlinear pressure response measured on the blade suction surface is not captured in the present inviscid analysis.

Nallasamy, M.↗
NASA NTRS1990

Unsteady blade-surface pressures on a large-scale advanced propeller: Prediction and data

An unsteady 3-D Euler analysis technique is employed to compute the flow field of an advanced propeller operating at an angle of attack. The predicted blade pressure waveforms are compared with wind tunnel data at two Mach numbers, 0.5 and 0.2. The inflow angle is three degrees. For an inflow Mach number of 0.5, the predicted pressure response is in fair agreement with data: the predicted phases of the waveforms are in close agreement with data while the magnitudes are underpredicted. At the low Mach number of 0.2 (takeoff), the numerical solution shows the formation of a leading edge vortex which is in qualitative agreement with measurements. However, the highly nonlinear pressure response measured on the blade suction surface is not captured in the present inviscid analysis.

Nallasamy, M.↗
NASA NTRS1988

Turbofan forced mixer lobe flow modeling. 1: Experimental and analytical assessment

A joint analytical and experimental investigation of three-dimensional flowfield development within the lobe region of turbofan forced mixer nozzles is described. The objective was to develop a method for predicting the lobe exit flowfield. In the analytical approach, a linearized inviscid aerodynamical theory was used for representing the axial and secondary flows within the three-dimensional convoluted mixer lobes and three-dimensional boundary layer analysis was applied thereafter to account for viscous effects. The experimental phase of the program employed three planar mixer lobe models having different waveform shapes and lobe heights for which detailed measurements were made of the three-dimensional velocity field and total pressure field at the lobe exit plane. Velocity data was obtained using Laser Doppler Velocimetry (LDV) and total pressure probing and hot wire anemometry were employed to define exit plane total pressure and boundary layer development. Comparison of data and analysis was performed to assess analytical model prediction accuracy. As a result of this study a planar mixed geometry analysis was developed. A principal conclusion is that the global mixer lobe flowfield is inviscid and can be predicted from an inviscid analysis and Kutta condition.

Barber, T.↗
NASA NTRS2022

S-band Network Analysis and Strategies for LEO Multi-CubeSat Science Missions

This paper presents the network architecture utilized at NASA’s Goddard Space Flight Center (GSFC) to support a mission set of five 6U CubeSats. These five CubeSats employ a multi-waveform Software Defined Radio (SDR) platform developed by Vulcan Wireless for use with NASA’s Space Relay (SR) and Direct to Earth (DTE) networks. The performance testing of the SDR is discussed via a comprehensive S-band and communication link analysis. The tested capabilities of the SDR and antenna components are reviewed in terms of the mission requirements for each CubeSat. Size Weight and Power (SWaP), required availability, and access times are discussed. The measured data from experimental compatibility testing is incorporated into detailed simulations of the CubeSat mission set to verify desired performance over the mission lifetime. The model is also used to investigate the impact of potential adverse effects on the communication links such as interference and weather conditions. This paper also reviews potential improvements from future technological advances and commercial partnerships. A collaborative investigation between GSFC and Oklahoma State University is presented in which a qualitative analysis of Hybrid RF/Optical communication strategies is performed. The data rate improvements of optical communication techniques are weighed against attitude control and science mission requirements for CubeSats, and network architectures/switching strategies are discussed. A separate analysis reviews the potential benefits of ground station partnerships, which aligns with NASA’s future goal to include commercial partners in its Earth and space network architectures, e.g. LunaNet.

Space networks↗
DOE OSTI2025

Catalytic resonance theory for parametric uncertainty of programmable catalysis

Microkinetic models are useful tools for screening catalytic materials; however, errors in their input parameters can lead to significant uncertainty in model predictions of catalyst performance. Here, in this work, we investigate the impact of linear scaling and Brønsted-Evans-Polanyi relation parametric uncertainty on microkinetic predictions of programmable-catalyst performance. Two case studies are considered: a generic A-to-B prototype reaction and the oxygen evolution reaction (OER). The results show that error-unaware models can accurately predict trends and, for the prototype reaction, values of optimal waveform parameters. The specific model parameters driving output uncertainty are identified via variance-based global sensitivity analysis. However, predictions of dynamic rate enhancement can decrease when uncertainty is propagated into the models. In both cases, we identify operating conditions where the programmable catalyst achieves a rate enhancement of at least one order of magnitude despite parametric uncertainty in the model, supporting programmable catalysis as a viable strategy for exceeding the Sabatier limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Electromagnetic resonances of cylinders and aircraft model with resistive wires

The natural frequencies of the electromagnetic resonances of conducting bodies with attached wires were determined. The bodies included twp cylinders and an approximate scale model of the NASA F-106B aircraft. All were three feet in length. Time domain waveforms of B-dot and D-dot were obtained from a sampling oscilloscope, and Prony analysis was used to extract the natural frequencies. The first four natural frequencies of the cylinders (and wires) were determined, and a comparison with calculated results of other investigators shows reasonable agreement. Seven natural frequencies were determined for the F-106B model (with wires), and these were compared with results obtained by NASA in 1982 during direct lightning strikes to the aircraft. The agreement between the corresponding natural frequencies of the model and the aircraft is fairly good and is better than that obtained in the previous work using wires with less resistance. The frequencies lie between 6.5 MHz and 41 MHz, and all of the normalized damping rates are between 0.14 and 0.27.

Wood, G. W.↗
NASA NTRS1985

Electromagnetic resonances of cylinders and aircraft model with resistive wires

Laboratory experiments were done to determine the natural frequencies of the electromagnetic resonances of conducting bodies with attached wires. The bodies include two cylinders and an approximate scale model of the NASA F-106B aircraft. All are three feet in length. Time-domain waveforms of B-dot and D-dot were obtained from a sampling oscilloscope, and Prony analysis was used to extract the natural frequencies. This work is an extension of previous work, but smaller, more resistive wires have been used. The first four natural frequencies of the cylinders (and wires) were determined, and a comparison with calculated results of other investigators show reasonable agreement. Seven natural frequencies were determined for the F-106B model (wire wires), and these have been compared with results obtained by NASA in 1982 during direct lightning strikes to the aircraft. The agreement between the corresponding natural frequencies of the model and the aircraft is fairly good and is better than that obtained in the previous work using wires with less resistance. The frequencies lie between 6.5 MHz and 41 MHz, and all of the normalized damping rates are between 0.14 and 0.27.

Wood, G. W.↗
NASA NTRS1994

Design of power electronics for TVC and EMA systems

The EMA systems proposed for future space transportation applications are high power systems operating at voltages up to 270 Vdc and at current levels on the order of hundreds of amperes. The position of the actuator is controlled by modulating the flow of energy from the source to an electric motor with an inverter. Hard-switching of the semiconductor devices in the inverter results in considerable device switching stresses and losses and in the generation of substantial amounts of EMI. Both of these can be reduced by employing zero-voltage-switching (ZVS) techniques in the inverter. This project has focused on the development of a ZVS inverter for the Marshall Space Center EMA prototypes, which utilize brushless dc motors to convert electrical energy to mechanical energy. An inverter which permitted zero-voltage switching and a quasi-PWM operation was selected for study and implementation. A waveshaping circuit is added to the front of a standard three-phase inverter to achieve the desired switching properties. This circuit causes the input voltage of the three-phase inverter to ring to zero where it is clamped for a short period of time. During this zero-voltage period, any of the semiconductor switches in the three-phase inverter are switched on or off at zero voltage resulting in a reduction in switching losses and EMI. The operation of this waveshaping circuit and its interaction with the three-phase inverter are described. The different circuit modes were analyzed using equivalent circuits. Based on this analysis, design relationships were developed for calculating component values for the circuit elements in the waveshaping circuit. Waveforms of various voltages and currents in the waveshaping circuit were plotted and used to determine the ratings of the semiconductors in the waveshaping circuit. The implementation of this inverter are described. Block diagrams for the overall control system and the waveshaping circuit control are presented and discussed. The current control scheme employed in the controller is also described.

Nelms, R. Mark↗
NASA NTRS2006

Binary black hole merger dynamics and waveforms

We apply recently developed techniques for simulations of moving black holes to study dynamics and radiation generation in the last few orbits and merger of a binary black hole system. Our analysis produces a consistent picture from the gravitational wave forms and dynamical black hole trajectories for a set of simulations with black holes beginning on circular-orbit trajectories at a variety of initial separations. We find profound agreement at the level of 1% among the simulations for the last orbit, merger and ringdown, resulting in a final black hole with spin parameter a/m = 0.69. Consequently, we are confident that this part of our waveform result accurately represents the predictions from Einstein's General Relativity for the final burst of gravitational radiation resulting from the merger of an astrophysical system of equal-mass non-spinning black holes. We also find good agreement at a level of roughly 10% for the radiation generated in the preceding few orbits.

Baker, John G.↗
NASA NTRS1992

Crab pulsar giant pulses: Simultaneous radio and GRO observations

Observations are reported of the Crab pulsar made at radio frequencies concurrent with Oriented Scintillation Spectrometer Experiment (OSSE) observations from 15 to 27 May 1991. Using the 43 m telescope at Green Bank at 0.8 and 1.4 GHz, samples were made continuously for 10 hrs/day at intervals of 100 to 300 microsecs. The analysis of the radio data includes calculation of histograms of pulse intensities, absolute timing to about 20 microsec precision, and characterization of intensity variations on time scales from the 33 ms spin period to days. The most detailed analysis is presented made of giant pulses. The ultimate goal is to bin the radio data into giant and nongiant pulses and to form average waveforms of OSSE data for the corresponding pulse periods. A test is done to see whether the violet radio fluctuations (which are not seen in other radio pulsars to the same degree) are correlated with low energy gamma rays, yielding constraints on the radio coherence mechanism and the steadiness of the electron-positron outflow in the magnetosphere. Timing analysis of the radio data provides a well defined ephemeris over the specified range of epochs. The gamma ray pulse phase was predicted with an error of less than 70 microsecs.

Lundgren, Scott C.↗
NASA NTRS2006

Modeling Gravitational Radiation Waveforms from Black Hole Mergers

Gravitational radiation from merging binary black hole systems is anticipated as a key source for gravitational wave observations. Ground-based instruments, such as the Laser Interferometer Gravitational-wave Observatory (LIGO) may observe mergers of stellar-scale black holes, while the space-based Laser Interferometer Space Antenna (LISA) observatory will be sensitive to mergers of massive galactic-center black holes over a broad range of mass scales. These cataclysmic events may emit an enormous amount of energy in a brief time. Gravitational waves from comparable mass mergers carry away a few percent of the system's mass-energy in just a few wave cycles, with peak gravitational wave luminosities on the order of 10^23 L_Sun. Optimal analysis and interpretation of merger observation data will depend on developing a detailed understanding, based on general relativistic modeling, of the radiation waveforms. We discuss recent progress in modeling radiation from equal mass mergers using numerical simulations of Einstein's gravitational field equations, known as numerical relativity. Our simulations utilize Adaptive Mesh Refinement (AMR) to allow high-resolution near the black holes while simultaneously keeping the outer boundary of the computational domain far from the black holes, and making it possible to read out gravitational radiation waveforms in the weak-field wave zone. We discuss the results from simulations beginning with the black holes orbiting near the system's innermost stable orbit, comparing the recent simulations with earlier "Lazarus" waveform estimates based on an approximate hybrid numerical/perturbative technique.

Baker, J. G.↗
DOE OSTI2023

Uncovering extreme nonlinear dynamics in solids through time-domain field analysis

Time-domain analysis of harmonic fields with sub-cycle resolution is now experimentally viable due to the emergence of sensitive, on-chip techniques for petahertz-scale optical-field sampling. We demonstrate how such a time-domain, field-resolved analysis uncovers the extreme nonlinear electron dynamics responsible for high-harmonic generation within solids. Time-dependent density functional theory was used to simulate harmonic generation from a solid-state band-gap system driven by near- to mid-infrared waveforms. Particular attention was paid to regimes where both intraband and interband emission mechanisms play a critical role in shaping the nonlinear response. We show that a time-domain analysis of the harmonic radiation fields identifies the interplay between intra- and interband dynamical processes underlying the nonlinear light generation. With further analysis, we show that changes to the dominant emission regime can occur after only slight changes to the peak driving intensity and central driving wavelength. Furthermore, time-domain analysis of harmonic fields also reveals, for the first time, the possibility of rapid changes in the dominant emission mechanism within the temporal window of the driving pulse envelope. Finally, we examine the experimental viability of performing time-domain analysis of harmonic fields with sub-cycle resolution using realistic parameters.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1980

Ultrasonic spectrum analysis using frequency-tracked gated RF pulses

A new method of ultrasonic frequency analysis is introduced which employs frequency-tracked gated RF drive pulses rather than shock-excited broadband spikes to generate the ultrasonic waveform. The new technique, a variation of the sampled-continuous wave technique, eliminates problems associated with finite pulse widths of conventional methods. It is shown to yield correct ultrasonic wave velocity measurements of the sample irrespective of receiver gate width or position provided any portions of two successive echoes are gated simultaneously into the spectrum analyzer. The experimental observations are substantiated by a theoretical model based on the time-frequency domain formulation of ultrasonic frequency analysis.

Cantrell, J. H., Jr.↗
NASA NTRS2009

Effects of Lightning Injection on Power-MOSFETs

Lightning induced damage is one of the major concerns in aircraft health monitoring. Such short-duration high voltages can cause significant damage to electronic devices. This paper presents a study on the effects of lightning injection on power metal-oxide semiconductor field effect transistors (MOSFETs). This approach consisted of pin-injecting lightning waveforms into the gate, drain and/or source of MOSFET devices while they were in the OFF-state. Analysis of the characteristic curves of the devices showed that for certain injection modes the devices can accumulate considerable damage rendering them inoperable. Early results demonstrate that a power MOSFET, even in its off-state, can incur considerable damage due to lightning pin injection, leading to significant deviation in its behavior and performance, and to possibly early device failures.

Celaya, Jose↗