Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “visible spectrum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The vibrational overtone spectrum of liquid methane in the visible and near infrared - Applications to planetary studies

The strengths of 10 bands in the absorption spectrum of liquid methane between 19,400 and 6190 A have been measured. After a small correction for the polarizability of the liquid is applied for the purpose of comparison with similar gas-phase measurements, it is found that there is no temperature dependence of the band strengths between 95 and 295 K. Changes of band shape with temperature cause the 95 K laboratory spectra to resemble Saturn more than room-temperature observations do. Gas-phase absorption clearly dominates the liquid in planetary spectra, so liquid methane cannot be detected in the outer solar system by earth-based observations.

Ramaprasad, K. R.↗
NASA NTRS2006

Final Results from the BIMA CMB Anisotropy Survey and Search for Signature of the SZ Effect

We report the final results of our study of the cosmic microwave background (CMB) with the BIMA array. Over 1000 hours of observation were dedicated to this project exploring CMB anisotropy on scales between 1' and 2' in eighteen 6'.6 FWHM fields. In the analysis of the CMB power spectrum, the visibility data is divided into two bins corresponding to different angular scales. Modeling the observed excess power as a flat band of average multipole l(sub eff)= 5237, we find deltaT(sup 2)(sub 1) = 220(sup +140)(sub -120) mu K(sup 2) at 68% confidence and deltaT(sup 2)(sub 1) greater than 0 muK(sup 2) with 94.7% confidence. In a second band with average multipole of l(sub eff) = 8748, we find deltaT(sup 2)(sub 2) consistent with zero, and an upper limit 880 muK(sup 2) at 95% confidence. An extensive series of tests and supplemental observations with the VLA provide strong evidence against systematic errors or radio point sources being the source of the observed excess power. The dominant source of anisotropy on these scales is expected to arise from the Sunyaev-Zel'dovich (SZ) effect in a population of distant galaxy clusters. If the excess power is due to the SZ effect, we can place constraints on the normalization of the matter power spectrum sigma(sub 8) = 1.03(sup +0.20)(sub -0.29) at 68% confidence. The distribution of pixel fluxes in the BIMA images are found to be consistent with simulated observations of the expected SZ background and rule out instrumental noise or radio sources as the source of the observed excess power with similar confidence to the detection of excess power. Follow-up optical observations to search for galaxy over-densities anti-correlated with flux in the BIMA images, as might be expected from the SZ effect, proved to be inconclusive.

Dawson, K. S.↗
DOE OSTI2021

Polarization-Insensitive Medium-Switchable Holographic Metasurfaces

The adoption of metasurfaces has led to revolutionary advances in holography due to improved compactness, integrability, and performance. Switchable meta-holograms projecting different replay field images in a controllable manner are highly desirable. Still, existing technologies generally rely on the use of polarized light and additional optics to facilitate switching. Consequently, the potential benefits afforded through the use of metasurfaces are limited both by the system complexity and a fixed relationship between the optical input and output. In this manuscript, we demonstrate polarization-insensitive metasurfaces encoding arbitrary and independent holograms, which can be switched between by changing the refractive index of the infiltration medium while maintaining identical illumination conditions. Finally, by sidestepping the requirements for high-performance light sources, switching optics, or delicate alignment, this approach points toward ultracompact and cost-effective switchable meta-holograms for various practical applications, such as holographic image projection, eye-perceptible sensors, optical information storage, processing, and security.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Vertical Architecture Solution-Processed Quantum Dot Photodetectors with Amorphous Selenium Hole Transport Layer

Colloidal quantum dots (CQDs) provide wide spectral tunability and high absorption coefficients owing to quantum confinement and large oscillator strengths, which along with solution processability, allow a facile, low-cost, and room-temperature deposition technique for the fabrication of photonic devices. However, many solution-processed CQD photodetector devices demonstrate low specific-detectivity and slow temporal response. To achieve improved photodetector characteristics, limiting carrier recombination and enhancing photogenerated carrier separation are crucial. In this study, we develop and present an alternate vertical-stack photodetector wherein we use a solution-processed quantum dot photoconversion layer coupled to an amorphous selenium (a-Se) wide-bandgap charge transport layer that is capable of exhibiting single-carrier hole impact ionization and is compatible with active-matrix readout circuitry. This a-Se chalcogenide transport layer enables the fabrication of high-performance and reliable solution-processed quantum dot photodetectors, with enhanced charge extraction capabilities, high specific detectivity (D* ~ 0.5–5 × 10 12 Jones), fast 3 dB electrical bandwidth (3 dB BW ~ 22 MHz), low dark current density (J D ~ 5–10 pA/cm 2 ), low noise current (i n ~ 20–25 fW/Hz 1/2 ), and high linear dynamic range (LDR ~130–150 dB) across the measured visible electromagnetic spectrum (~405–656 nm).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

3D Printing of Inconel 718 with Enhanced Boron Composition as a Novel Solar Absorber Tube Material in the Concentrated Solar Power (CSP) System

The growing demands for elevated efficiency in the solar energy industry led researchers to focus on the development of functional solar absorber tube material in concentrated solar power (CSP) systems, when molten salts are adopted as the heat transfer fluid. In this study, the typical solar absorber tube material, Inconel 718, was enhanced with boron to achieve a higher solar absorptivity in the visible light spectrum. Combined with an additive manufacturing (AM) method, the boron composition exceeded the traditional manufacturing limit of 60 ppm without microstructural defects. The boron-enhanced Inconel 718 exhibited a high solar absorptivity of nearly 90 % while maintaining a high thermal cycle fatigue resistance after thermal cycling treatment between 550°C and 720°C. The boron composition was increased to the manufacturing failure point, and the effects of different boron compositions on mechanical properties, microstructure, and optical properties were studied. The provided microstructure-property map in this study delivers high potentials of functional AM-printed alloy material in CSP applications.

13 HYDRO ENERGY↗
DOE OSTI2025

Materials for Energy Management across the Electromagnetic Spectrum (MEMES) (LDRD Report)

Electrification of the United States has been a major driver of economic growth, powering industrialization, modern manufacturing, and the digital economy. Today, further economic and environmental benefits can be realized by improving the energy efficiency of the technologies we have come to rely on. This project focused on enhancing the energy efficiency of two cornerstone technologies of modern society: electronic displays and building climatization. While these two technologies operate in different parts of the electromagnetic spectrum (the visible and infrared, respectively), they share a common potential technological solution: electrically-driven displays that change reflectivity. In this work, we developed the first multipixel multicolor reflective display that achieves multi-colorization with fast-changing structural color. In the course of this demonstration, we quantified the structural changes that occur across different time and length scales and resolved device sealing issues, enabling operation of these devices over months (as opposed to days previously). We furthermore developed two reflectivity changing devices in the infrared and demonstrated how these technologies can be used to reduce climatization demands for both smart window and smart wall technologies. Implementing such a device in a scaled down mock room resulted in 10 degree Celsius change.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Quantum Imaging with X-rays

Quantum imaging encompasses a broad range of methods that exploit the quantum properties of light to capture information about an object. One such approach involves using a two-photon quantum state, where only one photon interacts with the object being imaged while its entangled partner carries spatial or temporal information. To implement this technique, it is necessary to generate specific quantum states of light and detect photons at the single-photon level. While this method has been successfully demonstrated in the visible electromagnetic spectrum, extending it to X-rays has faced significant challenges due to the difficulties in producing a sufficient rate of X-ray photon pairs and detecting them with adequate resolution. Here, we demonstrate record high rates of correlated X-ray photon pairs produced via a spontaneous parametric down-conversion process and we employ these photons to perform quantum correlation imaging of several objects, including a biological sample (E. cardamomum seedpod). Notably, we report an unprecedented detection rate of about 6,300 pairs per hour and the observation of energy anti-correlation for the X-ray photon pairs. We also present a detailed analysis of the properties of the down-converted X-ray photons, as well as a comprehensive study of the correlation imaging formation, including a study of distortions and corrections. These results mark a substantial advancement in X-ray quantum imaging, expanding the possibilities of X-ray quantum optical technologies, and illustrating the pathway towards enhancing biological imaging with reduced radiation doses.

Gofron, Kaz [ORNL] (ORCID:0000000314415736)↗
NASA NTRS1966

Radio Astronomy

Radio astronomical studies in OH interferometry, discrete radio sources, and spectrum measurements of Venus and Jupiter

SPECTRAL EMISSION↗