Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “viscous effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

An investigation of transient pressure and plasma properties in a pinched plasma column

The transient pinched plasma column generated in a linear Z-pinch was studied experimentally and analytically. The plasma column was investigated experimentally with the following plasma diagnostics: a special rapid response pressure transducer, a magnetic field probe, a voltage probe and discharge luminosity. Axial pressure profiles on the discharge chamber axis were used to identify three characteristic regions of plasma column behavior; they were in temporal sequence: strong axial pressure asymmetry noted early in plasma column lifetime followed by plasma heating in which there is a rapid rise in static pressure and a slight decrease static pressure before plasma column breakup. Plasma column lifetime was approximately 5 microseconds. The axial pressure asymmetry was attributed to nonsimultaneous pinching of the imploding current sheet along the discharge chamber axis. The rapid heating is attributed in part to viscous effects introduced by radial gradients in the axial streaming velocity. Turbulent heating arising from discharge current excitation of the ion acoustic wave instability is also considered a possible heating mechanism.

Stover, E. K.↗

An investigation of transient pressures and plasma properties in a pinched plasma column

The transient pinched plasma column generated in a linear Z-pinch was studied experimentally and analytically. The plasma column was investigated experimentally with several plasma diagnostics; they were: a rapid response pressure transducer, a magnetic field probe, a voltage probe, and discharge luminosity. Axial pressure profiles on the discharge chamber axis were used to identify three characteristic regions of plasma column behavior: (1) strong axial pressure asymmetry noted early in plasma column lifetime, (2) followed by plasma heating in which there is a rapid rise in static pressure, and (3) a slight decrease static pressure before plasma column breakup. Plasma column lifetime was approximately 5 microseconds. The axial pressure asymmetry was attributed to nonsimultaneous pinching of the imploding current sheet along the discharge chamber axis. The rapid heating could be attributed in part to viscous effects introduced by radial gradients in the axial streaming velocity.

Stover, E. K.↗

Static and dynamic pitching moment measurements on a family of elliptic cones at Mach number 11 in helium

Static and dynamic pitching moment measurements were made on a family of constant volume elliptic cones about two fixed axes of oscillation in the NAE helium hypersonic wind tunnel at a Mach number of 11 and at Reynolds numbers based on model length of up to 14 million. Viscous effects on the stability derivatives were investigated by varying the Reynolds number for certain models by a factor as large as 10. The models investigated comprised a 7.75 deg circular cone, elliptic cones of axis ratios 3 and 6, and an elliptic cone with conical protuberances.

Orlik-Rueckermann, K. J.↗

On the applicability of lunar breccias for paleomagnetic interpretations.

The weak but definite remanent magnetization of returned lunar samples is discussed. In general, the breccias have the possibility of carrying a significant viscous remanent magnetism (VRM) when exposed to magnetic fields. The two samples studied appear to exemplify two limiting cases which can be clearly related to the iron distribution present. The VRM measured in the laboratory must have been acquired by the samples since their return to earth because the time decay proceeds at such a rate that any viscous remanence will disappear in less than half a year. In spite of the viscous effects there seems to be little question that some breccias carry a recognizable stable remanent magnetism which is very much like that found in the igneous rocks, both in stability and intensity. It is concluded that it is possible to use some of the breccias to reconstruct the history of the lunar magnetic field.

Gose, W. A.↗

Relaxation solutions for inviscid axisymmetric transonic flow over blunt or pointed bodies.

A finite-difference relaxation method is presented for numerical solution of the full potential equation and exact boundary conditions for general axisymmetric bodies is inviscid, steady transonic flow. Body-normal coordinates are used in the nose region and sheared cylindrical coordinates are used on the afterbody to accommodate corners such as boattails and flares. An improved difference scheme is used which does not require that the flow be nearly alined with a coordinate direction in supersonic regions, and which treats either subsonic or supersonic free streams. Numerical results are illustrated for some simple classical shapes such as spheres and ellipsoids, and for more practical shapes like tangent-ogives with boattails. Special attention is given to bodies which have been studied for area-rule applications. Agreement with available experimental results is good in cases where viscous effects and wind-tunnel wall interference are not important.

South, J. C., Jr.↗

An experimental and theoretical study of the flow phenomena within a vortex sink rate sensor

A description of the flow field within a vortex sink rate sensor was obtained, and the influence of viscous effects on its performance was observed. The sensor basically consisted of a vortex chamber and a sink tube. The vortex chamber consisted of two circular coaxial disks held apart, at their periphery, by a porous coupling. One circular disk had an opening to permit the mounting of the sink tube, in such a manner that the vortex chamber as well as the sink tube had a common axis of rotation. Air was supplied radially to the sensor through its porous coupling as the sensor was rotated at various speeds. Particular emphasis was directed toward an understanding of the flow field in the sink tube region. Thus velocity measurements at various stations along the length of the sink tube as well as along a given radius at any designated station were taken.

Patel, D. K.↗

Longitudinal aerodynamic performance of a series of power-law and minimum wave drag bodies at Mach 6 and several Reynolds numbers

Experimental data have been obtained for two series of bodies at Mach 6 and Reynolds numbers, based on model length, from 1.4 million to 9.5 million. One series consisted of axisymmetric power-law bodies geometrically constrained for constant length and base diameter with values of the exponent n of 0.25, 0.5, 0.6, 0.667, 0.75, and 1.0. The other series consisted of positively and negatively cambered bodies of polygonal cross section, each having a constant longitudinal area distribution conforming to that required for minimizing zero-lift wave drag at hypersonic speeds under the geometric constraints of given length and volume. At the highest Reynolds number, the power-law body for minimum drag is blunter (exponent n lower) than predicted by inviscid theory (n approximately 0.6 instead of n = 0.667); however, the peak value of lift-drag ratio occurs at n = 0.667. Viscous effects were present on the bodies of polygonal cross section but were less pronounced than those on the power-law bodies. The trapezoidal bodies with maximum width at the bottom were found to have the highest maximum lift-drag ratio and the lowest mimimum drag.

Ashby, G. C., Jr.↗

An experimental and theoretical study of the flow phenomena within a vortex sink rate sensor

Tests were conducted to obtain a description of the flow field within a vortex sink rate sensor and to observe the influence of viscous effects on its performance. The characteristics of the sensor are described. The method for conducting the test is reported. It was determined that for a specific mass flow rate and the geometry of the vortex chamber, the flow in the vortex chamber was only affected, locally, by the size of the sink tube diameter. Within the sink tube, all three velocity components were found to be higher for the small sink tube diameters. As the speed of rotation of the sensor was increased, the tangential velocities within the vortex chamber, as well as in the sink tube, increased in proportion to the speed of rotation.

Goglia, G. L.↗

Stagnation and downstream viscous shock-layer solutions with radiation and coupled ablation injection

This paper describes a rigorous viscous shock-layer analysis for investigating high energy equilibrium flow fields about blunt axisymmetric bodies. The analysis includes radiation transfer, mass injection, diffusion, and viscous effects. Radiation transfer is calculated with a nongray radiation model that accounts for line and continuum radiation. The analysis can treat all levels of blowing for both stagnation and downstream flow. Results are presented for selected earth entry conditions that demonstrate the essential features of this analysis. Particular emphasis is given to the effects of mass injection on stagnation and downstream flow. Results for both specified and coupled ablation injection are presented.

Moss, J. N.↗

An analysis method for two-dimensional transonic viscous flow

A method for the approximate calculation of transonic flow over airfoils, including shock waves and viscous effects, is described. Numerical solutions are obtained by use of a computer program which is discussed in the appendix. The importance of including the boundary layer in the analysis is clearly demonstrated, as well as the need to improve on existing procedures near the trailing edge. Comparisons between calculations and experimental data are presented for both conventional and supercritical airfoils, emphasis being on the surface pressure distribution, and good agreement is indicated.

Bavitz, P. C.↗

Nozzle Free Jet Flows Within the Strong Curved Shock Regime

A study based on inviscid analysis was conducted to examine the flow field produced from a convergent-divergent nozzle when a strong curved shock occurs. It was found that a certain constraint is imposed on the flow solution of the problem which is the unique feature of the flow within this flow regime, and provides the reason why the inverse method of calculation cannot be employed for these problems. An approximate method was developed to calculate the flow field, and results were obtained for two-dimensional flows. Analysis and calculations were performed for flows with axial symmetry. It is shown that under certain conditions, the vorticity generated at the jet boundary may become infinite and the viscous effect becomes important. Under other conditions, the asymptotic free jet height as well as the corresponding shock geometry were determined.

Shih, Tso-Shin↗

Viscous-shock-layer solutions with radiation and ablation injection for Jovian entry

This paper presents results that describe the flow field and surface response conditions for a planetary probe entering the atmosphere of Jupiter. The results are obtained with a viscous-shock-layer analysis which includes mass injection, radiative transfer, diffusion, and viscous effects. Radiative transfer is calculated with an existing nongray radiation model that accounts for molecular band, atomic line, and continuum transitions. Particular emphasis is given to the effect of mass injection on the stagnation and downstream flow. Results for both specified and coupled mass injection are obtained for a carbon heat shield.

Moss, J. N.↗

A comparison of a shock-capturing technique with experimental data for three-dimensional internal flows

Shock-capturing solutions for an axisymmetric supersonic inlet at small angles of attack are obtained. Good overall agreement between the shock-capturing solutions and experimental data is shown except in regions of strong viscous effects or boundary-layer removal. Although the results indicate a strong potential for the use of shock-capturing or finite-difference solutions for internal flows, improvement in the ability to handle the reflection of strong shockwaves having downstream Mach numbers near 1 is needed.

Presley, L. L.↗

Subsonic finite elements for wing body combinations

Capabilities, limitations, and applications of various theories for the prediction of wing-body aerodynamics are reviewed. The methods range from approximate planar representations applicable in preliminary design to surface singularity approaches applicable in the later stages of detail design. The available methods for three-dimensional configurations are limited as inviscid solutions with viscous effects included on an empirical or strip basis.

Thomas, J. L.↗

Internal flow calculations for axisymmetric supersonic inlets at angle of attack

Several solutions for the internal flow in axisymmetric supersonic inlets at angle of attack were obtained. A shock-capturing finite-difference technique was used to obtain the solutions. Good overall agreement between the shock-capturing solutions and experimental data was obtained, except in regions of strong viscous effects or boundary-layer removal. The required centerbody translation with changes in freestream Mach number and angle of attack was obtained and agrees qualitatively with experimental data.

Presley, L. L.↗

Non-equilibrium radiation from viscous chemically reacting two-phase exhaust plumes

A knowledge of the structure of the rocket exhaust plumes is necessary to solve problems involving plume signatures, base heating, plume/surface interactions, etc. An algorithm is presented which treats the viscous flow of multiphase chemically reacting fluids in a two-dimensional or axisymmetric supersonic flow field. The gas-particle flow solution is fully coupled with the chemical kinetics calculated using an implicit scheme to calculate chemical production rates. Viscous effects include chemical species diffusion with the viscosity coefficient calculated using a two-equation turbulent kinetic energy model.

Penny, M. M.↗

Three-dimensional flow calculation for a transonic compressor rotor

A numerical calculation of the steady, inviscid, three dimensional flow in a isolated transonic compressor rotor has been completed using MacCormack's second order accurate time-marching scheme. This rotor has a tip Mach number of 1.2, an overall diameter of 2 feet, and inlet hub/tip ratio of 0.5. The computed rotor total pressure ratio is 1.82. Comparisons between the numerical solution, measurements of the intra-blade static density field obtained by gas fluorescence, and time resolved exit flow measurements showed that the inviscid computation accurately models transonic rotor aerodynamics and rotor blade pressure distributions in the upstream portions of the blade passages, the viscous effects influencing mainly the downstream flow.

Thompkins, W. T., Jr.↗

A FORTRAN program for the determination of nozzle contours for rotational, non-homentropic gas mixtures

A program was written which generates a nozzle contour and the complete flow field for two dimensional or axisymetric flows designed to exit parallel to the axis at uniform pressure. The flow is that of a rotational, non-homentropic gas mixture where viscous effects were neglected and the chemistry is assumed frozen. A description of the numerical program developed, is also described.

Kalben, P.↗