Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “utility rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Utilization of an Advanced Sensor network to determine fuel heating value and Real-Time net unit heat rate during transient operation

Coal-fired utility boilers are being increasingly used as variable electricity generation to resolve the imbalance in the energy market from the expansion of intermittent renewable energy. The frequent transient operation required to meet residual energy demand has created a challenge for coal-fired units to operate efficiently. This work utilizes an advanced sensor network (ASN) to calculate net unit heat rate (NUHR) of a coal-fired boiler in real time through combustion calculations and statistical correlations to provide the tools for optimizing dynamic operation. Real-time heating values that were necessary to determine fuel input energy to calculate accurate NUHR were found using both fundamental and data-driven methods. Real-time NUHR shows distinct shifts that reflect changes in process conditions that will improve the ability to optimize transient operation. Data-driven heating value correlations had 24% lower root mean square error (RMSE) than the fundamental combustion calculation approach when compared to daily retrospective proximate analysis. Furthermore, the data-driven method RMSE improved by 7% with the inclusion of ASN data. Future work is to validate by comparing unit performance with and without the inclusion of NUHR as a control parameter for the dynamic neural network.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Degrees of Rate Control at Non(pseudo)steady-State Conditions

The degrees of rate control enable identification of rate-controlling transition states and species during (pseudo-)steady-state reaction. We demonstrate a method for identifying rate-controlling transition states and species at non-(pseudo-)steady-state conditions through modification of the definitions for degrees of rate control and sensitivities by superimposing the condition that time constants of the analytical rate function are kept constant when taking the partial derivatives of rate with respect to the rate constants/free energies. In conclusion, the utility of transient degrees of rate control is demonstrated for catalytic reaction networks to rationalize features of the transient rate including extrema and discontinuities.

42 ENGINEERING↗
NASA NTRS2003

Team Formation and Communication Restrictions in Collectives

A collective of agents often needs to maximize a "world utility" function which rates the performance of an entire system, while subject to communication restrictions among the agents. Such communication restrictions make it difficult for agents which try to pursue their own "private" utilities to take actions that also help optimize the world utility. Team formation presents a solution to this problem, where by joining other agents, an agent can significantly increase its knowledge about the environment and improve its chances of both optimizing its own utility and that its doing so will contribute to the world utility. In this article we show how utilities that have been previously shown to be effective in collectives can be modified to be more effective in domains with moderate communication restrictions resulting in performance improvements of up to 75%. Additionally we show that even severe communication constraints can be overcome by forming teams where each agent of a team shares the same utility, increasing performance an additional 25%. We show that utilities and team sizes can be manipulated to form the best compromise between how "aligned" an agent s utility is with the world utility and how easily an agent can learn that utility.

Agogino, Adrian K.↗
DOE OSTI2024

An Atlas of Current Customer-Facing Utility Program Designs and Pricing

The National Renewable Energy Laboratory (NREL) and Kevala conducted a targeted literature review and leveraged extensive expertise, including team members with four decades of experience in the utility sector, to characterize utility programs and rate designs. This analysis delves into the motivations behind these programs and the various hurdles they face. Through this in-depth study, the team provides critical insights into the operational dynamics of utility programs, identifying key drivers and barriers that influence their effectiveness and implementation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Special Nuclear Material Mass Estimates from Neutron Singles Count Rate [Poster]

The objective of this research was to create an algorithm to provide an estimate of special nuclear material (SNM) mass using only neutron count rate data from a Radioisotope Identification Device (RIID), rather than using time-correlated data from a neutron multiplicity counter. To meet this objective neutron count rate measurements of a 252 Cf source were taken at varying distances with an ORTEC Detective X, FLIR Identifinder 2, and an ORTEC RADEAGLET-R. An algorithm was created to estimate mass of SNM utilizing the singles rate equation and the measured absolute efficiency curves.

FLIR↗
NASA NTRS2024

Quantifying Caloric Expenditure During Zero-G Exercise

BACKGROUND: Exercise is a fundamental component of maintaining astronaut health on long-duration space missions, where the microgravity environment poses unique challenges to physiological homeostasis. Accurate quantification of energy expenditure during such exercises is crucial for optimizing nutritional and physical health strategies for spacefarers. OBJECTIVE: This study aims to develop a comprehensive model to estimate caloric expenditure during exercise in a microgravity environment, employing a combination of spirometry, heart rate data, and other relevant parameters. By assessing energy utilization under these conditions, we seek to facilitate enhanced health management protocols for astronauts in space. METHODS & OUTCOMES: A multivariate predictive model will be constructed, utilizing spirometry and heart rate data, coupled with additional physiological and environmental parameters. A systematic approach will be applied to analyze the relationship between these variables and energy expenditure during various exercises. The proposed model will subsequently undergo rigorous validation to ensure accuracy and reliability. This research is expected to yield a precise and reliable predictive model, contributing to improved strategies for exercise prescription and nutritional intake, addressing the unique challenges presented by microgravity environments. We anticipate that our findings will support the development of more effective health maintenance protocols for astronauts during extended space missions, mitigating the adverse effects of space travel on the human body. SIGNIFICANCE: The development of an accurate and adaptable model to quantify caloric expenditure during exercise in space represents a pivotal advancement in space medicine. The insights gained from this study have the potential to inform the design of enhanced health and wellness strategies, ensuring the well-being and operational effectiveness of astronauts in long-duration space missions.

Calorie↗
NASA NTRS1979

Turnover of Biogenic Amines in the Hypothalamus of Rats during Pyrogen Fever

Many pharmacological studies have implicated the biogenic amines in the hypothalamus as playing a role in the production of fever, but few investigations of endogenous neurochemicals have been made during fever. Turnover rates of transmitters utilizing radioactive precursors may be one of the most accurate measurements of activity in brain regions. The present study was designed to measure the turnover of 5-hydroxytryptamine (5-HT) norepinephrine (NE) and dopamine (DA) in the hypothalamus of rats during pyrogen fever. Salmonella typhosa (Wyeth, 8 units) was previously found in our laboratory to produce a significant hyperthermia in most rats by 2.5 hours. This pyrogen (N = l2) or saline control (N = 8) was injected intraperitoneally and the rats killed 2.75 hours later. Rectal temperatures (Tr) were monitored continuously with thermocouples taped to the tail and recorded automatically every 3 minutes. Half of each group received an injection of radioactive precursors, (3)H-tryptophan (0.5 mCi) and (3)H-tryptophan (1.0 mCi), via an indwelling jugular catheter 60 minutes before killing, and the other half at 90 minutes. The rats were killed by near freezing in liquid nitrogen and the brains dissected in the cold. Turnover was measured by the method of Lane (Life Sci 21, 1101, 1977). At the time of killing most of the pyrogen group showed a significant (p < .02) increase (mean +/- s.e.m.) in Tr above pre injection levels (0.75 +/- 0.13 C, N = 10). The saline group showed no change (-0.025 +/- 0.16, N = 8), and the difference between groups was also significant. No significant differences were found in the levels of the amines between the pyrogen and saline groups. A significant difference was found in the specific activity of NE between the 60 minute pyrogen and saline groups (4.41 +/- 0.41 vs 2.6 +/- 0.51 dpm/pmole) but no change in turnover. This suggests an increased accumulation of (3)H-NE in the pyrogen group, but no change in utilization. An increased turnover of DA for the pyrogen group (44.5 vs 19.2 pmole/mg protein/hr) was found. However, DA is mainly a precursor in the hypothalamus and measurement was near the limit of sensitivity for the assay; these limitations Must be considered in interpreting this data. The most significant finding was an increase in the turnover of 5-HT in the pyrogen group (41.3 vs 7.3 pmole/mg protein/hr), indicating a resynthetization rate of 77% of the total pool per hour. These results suggest that at the time point measured, an increase in the utilization of 5-HT in the hypothalamus is-correlated with pyrogen fever.

Penn, P. E.↗
NASA NTRS2003

Collective Intelligence

Many systems of self-interested agents have an associated performance criterion that rates the dynamic behavior of the overall system. This chapter presents an introduction to the science of such systems. Formally, collectives are defined as any system having the following two characteristics: First, the system must contain one or more agents each of which we view as trying to maximize an associated private utility; second, the system must have an associated world utility function that rates the possible behaviors of that overall system. In practice, collectives are often very large, distributed, and support little, if any, centralized communication and control, although those characteristics are not part of their formal definition. A naturally occurring example of a collective is a human economy. One can identify the agents and their private utilities as the human individuals in the economy and the associated personal rewards they are each trying to maximize. One could then identify the world utility as the time average of the gross domestic product. ("World utility" per se is not a construction internal to a human economy, but rather something defined from the outside.) To achieve high world utility it is necessary to avoid having the agents work at cross-purposes lest phenomena like liquidity traps or the Tragedy of the Commons (TOC) occur, in which agents' individually pursuing their private utilities lowers world utility. The obvious way to avoid such phenomena is by modifying the agents utility functions to be "aligned" with the world utility. This can be done via punitive legislation. A real-world example of an attempt to do this was the creation of antitrust regulations designed to prevent monopolistic practices.

Wolpert, David H.↗
NASA NTRS1971

How to reduce your fire insurance rates

Construction procedures and utilization of materials to reduce the cost of insuring large buildings against losses from fire are discussed. Examples of good and bad techniques in building construction and fire safety management are provided. The inadequacies of building codes and the hazards resulting from improper construction are examined.

Dubain, M.↗
DOE OSTI2025

Manufacturing Cost Analysis for PEM Electrolyzers and Perspectives for Future Cost Reduction

Electrolyzer capital costs strongly influence the total levelized cost of hydrogen production and have implications for hydrogen deployment. Current electrolyzer costs are high, and large cost reductions may be needed to achieve competitive hydrogen costs and targets. Understanding pathways for cost reduction via R&D and deployment is a critical research area for informed energy planning and enabling hydrogen use. This work presents bottom-up cost estimates of polymer electrolyte membrane (PEM) electrolyzer systems tied to design specifications and discusses perspectives for cost reduction opportunities based on ongoing research. We use a detailed manufacturing and process model for a 1 MW PEM electrolyzer stack and balance of plant (BOP) for rigorous cost estimation. This allows for robust estimates of component and manufacturing costs and examination of key cost contributors. Stack costs are dominated by material costs such as iridium and platinum catalysts, especially at high manufacturing rates; power electronics and hydrogen purification equipment are the largest contributors to BOP cost. At higher manufacturing rates, better equipment utilization could reduce stack costs significantly, and we estimate that experience and bulk purchasing will allow for cost reductions to some BOP components. Still, many well-established BOP technologies and stack material costs are less likely to see significant cost reductions at high manufacturing rates. As such, manufacturing scale is limited in how much it can reduce electrolyzer costs, and additional advances for cost reduction may be needed to achieve cost targets. It will likely take many combined strategies to achieve significant cost reductions for electrolyzers and enable low-cost hydrogen production. We can use our manufacturing cost model to quantify potential cost reductions from the considerations described above and demonstrate pathways to lower cost electrolyzers. This allows for better understanding of cost reduction strategies and enables more informed research, development, and deployment for electrolyzers.

cost↗
DOE OSTI2022

Predicting third-body collision efficiencies for water and other polyatomic baths

Low-pressure-limit microcanonical (collisional activation) and thermal rate constants are predicted using a combination of automated ab initio potential energy surface construction, classical trajectories, transition state theory, and a detailed energy- and angular-momentum-resolved collision kernel. Several systems are considered, including CH 4 (+M) and HO 2 (+M), with an emphasis on systems where experimental information is available for comparison. The a priori approach involves no adjustable parameters, and we show that the predicted thermal rate constants are in excellent agreement with experiments, with average deviations of less than 25%. Notably, the a priori approach is shown to perform equally well for atomic, diatomic, and polyatomic baths, including M = H 2 O, CO 2 , and “fuel” baths like M = CH 4 and NH 3 . Additionally, the utility of microcanonical rate constants for interpreting trends and inferring mechanistic details in the thermal kinetics is demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Rates of change of the earth's magnetic field measured by recent analyses

Typical rates of change of the earth's magnetic field are presented as a function of the earth's spherical harmonics. Harmonics up to the eight degree are analyzed. With the increase in the degree of the harmonics an increase in the relative rate of change can be observed. For higher degrees, the rate of change can be predicted. This enables a differentiation between harmonics originating in the core and harmonics caused by crustal magnetization. The westward drift of the magnetic field depends on the longitudinal gradient of the field. In order to determine the longitudinal motions, harmonics up to degree 20 can be utilized. The average rate of secular acceleration increases with the degree of harmonics from 0.001 deg/sq yr for a dipole term to an average of 0.05 deg/sq yr for degree eight harmonics.

Harrison, C. G. A.↗
NASA NTRS1975

A study of reacting free and ducted hydrogen/air jets

The mixing and reaction of a supersonic jet of hydrogen in coaxial free and ducted high temperature test gases were investigated. The importance of chemical kinetics on computed results, and the utilization of free-jet theoretical approaches to compute enclosed flow fields were studied. Measured pitot pressure profiles were correlated by use of a parabolic mixing analysis employing an eddy viscosity model. All computations, including free, ducted, reacting, and nonreacting cases, use the same value of the empirical constant in the viscosity model. Equilibrium and finite rate chemistry models were utilized. The finite rate assumption allowed prediction of observed ignition delay, but the equilibrium model gave the best correlations downstream from the ignition location. Ducted calculations were made with finite rate chemistry; correlations were, in general, as good as the free-jet results until problems with the boundary conditions were encountered.

Beach, H. L., Jr.↗
DOE OSTI2026

A Community Guide to Regulatory Barriers Affecting Microgrids (Reports 1-3)

In response to growing risks of power outages from extreme weather and aging infrastructure, communities are increasingly exploring the potential of microgrids to provide reliable energy access. Microgrids offer promising solutions to meet this challenge but face a complex landscape of non-technical barriers, particularly regulations concerning the provision and distribution of energy. Most existing legal and regulatory frameworks were designed for a centralized, one-way power system, and are often poorly suited to handle systems that independently balance distributed energy resources with local load. This three-part report series provides a strategic analysis of existing regulatory and legal factors affecting microgrid deployments to help non-technical community leaders and decision-makers better understand the feasibility of a microgrid in their community. -Report No. 1: Foundational Issues Facing Microgrids details the universal policy barriers all microgrids face, including utility interconnection processes, rate structures, and local permitting. -Report No. 2: Single Property Microgrids outlines how direct asset ownership and operating behind-the-meter can bypass some regulatory oversight, using the Blue Lake Rancheria microgrid as a case study. -Report No. 3: Multi-Property Microgrids tackles the complex challenges of crossing public rights-of-way and navigating utility franchise rights, highlighting the Coventry microgrid project. The series equips decision-makers with phased frameworks to navigate financial and regulatory complexities, engage effectively with local utilities and Authorities Having Jurisdiction (AHJs), and structure successful microgrid projects.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Correlating and Simulating Socio-Demographically Driven Residential End-Use Activity Schedules

Incorporating socio-demographic and behavioral considerations into decision-support tools is crucial for identifying gaps and addressing consumer needs to ensure reliable and affordable energy solutions. In energy simulation models, the correlation between socio-demographics and time-use behavior is not well-captured. Thus, we developed a large-scale simulation workflow to generate schedules for 10 residential activities across 24 population segments defined by age, income, and employment status. Using pre-pandemic 2015-2019 American Time Use Survey (ATUS) data, we used ANOVA to confirm the correlation between demographic factors and time use. We explored three k-modes clustering methods-backward, forward, and a new hybrid approach-to delineate the occupancy patterns based on demographics. Using the probability of cluster membership for each population segment and a time inhomogeneous Markov chain to generate activity transition probabilities for each cluster, we simulated 50,000 schedules per segment and validated them against the ATUS data. The hybrid method produced the most socio-demographically differentiated clusters while demonstrating comparable performance to other approaches, with an overall root mean square error of 0.12 for both weekday and weekend schedules. Thus, the hybrid method, where each cluster is dominated by certain demographic segments and occupancy patterns, offers more modeling versatility in terms of scenario analysis. The new workflow improves the socio demographic differentiation of energy consumption by considering differences in time use. This approach enables future research on demographically segmented time of use (TOU) energy consumption, including impacts of TOU utility bills and rate analysis, long-run marginal emissions, and energy retrofits.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1999

A TRMM Rainfall Estimation Method Applicable to Land Areas

Methods developed to estimate rain rate on a footprint scale over land with the satellite-borne multispectral dual-polarization Special Sensor Microwave Imager (SSM/1) radiometer have met with limited success. Variability of surface emissivity on land and beam filling are commonly cited as the weaknesses of these methods. On the contrary, we contend a more significant reason for this lack of success is that the information content of spectral and polarization measurements of the SSM/I is limited. because of significant redundancy. As a result, the complex nature and vertical distribution C, of frozen and melting ice particles of different densities, sizes, and shapes cannot resolved satisfactorily. Extinction in the microwave region due to these complex particles can mask the extinction due to rain drops. Because of these reasons, theoretical models that attempt to retrieve rain rate do not succeed on a footprint scale. To illustrate the weakness of these models, as an example we can consider the brightness temperature measurement made by the radiometer in the 85 GHz channel (T85). Models indicate that T85 should be inversely related to the rain rate, because of scattering. However, rain rate derived from 15-minute rain gauges on land indicate that this is not true in a majority of footprints. This is also supported by the ship-borne radar observations of rain in the Tropical Oceans and Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA-COARE) region over the ocean. Based on these observations. we infer that theoretical models that attempt to retrieve rain rate do not succeed on a footprint scale. We do not follow the above path of rain retrieval on a footprint scale. Instead, we depend on the limited ability of the microwave radiometer to detect the presence of rain. This capability is useful to determine the rain area in a mesoscale region. We find in a given rain event that this rain area is closely related to the mesoscale-average rain rate. Based on this observation, in this study we have developed a method to estimate the mesoscale-average rain rate over land utilizing microwave radiometer data. Because of the high degree of geographic and seasonal variability in the nature and intensity of rain, this method requires some tuning with 15-minute rain gauge data on land. After tuning the method, it can be applied to an independent set of rain events that are close in time and space. We find that the mesoscale rain rates retrieved over the period of a month on land with this method shows a correlation of about 0.85 with respect to the surface rain-gauge observations. This mesoscale-average rain rate estimation method can be useful to extend the spatial and temporal coverage of the rainfall data provided by the Precipitation Radar on board the Tropical Rainfall Measuring Mission (TRMM) satellite.

Prabhakara, C.↗
NASA NTRS1993

Lightweight linear alternators with and without capacitive tuning

Permanent magnet excited linear alternators rated tens of kW and coupled to free-piston Stirling engines are presently viewed as promising candidates for long term generation of electric power in both space and terrestrial applications. Series capacitive cancellation of the internal inductive reactance of such alternators was considered a viable way to both increase power extraction and to suppress unstable modes of the thermodynamic oscillation. Idealized toroidal and cylindrical alternator geometries are used for a comparative study of the issues of specific mass and capacitive tuning, subject to stability criteria. The analysis shows that the stator mass of an alternator designed to be capacitively tuned is always greater than the minimum achievable stator mass of an alternator designed with no capacitors, assuming equal utilization of materials ratings and the same frequency and power to a resistive load. This conclusion is not substantially altered when the usually lesser masses of the magnets and of any capacitors are added. Within the reported stability requirements and under circumstances of normal materials ratings, this study finds no clear advantage to capacitive tuning. Comparative plots of the various constituent masses are presented versus the internal power factor taken as a design degree of freedom. The explicit formulas developed for stator core, coil, capacitor, and magnet masses and for the degree of magnet utilization provide useful estimates of scaling effects.

Niedra, Janis M.↗