Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unpredictability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The effects of cockpit environment on long-term pilot performance

A fixed-base helicopter simulator was used to examine pilot performance as influenced by noise, vibration, and fatigue. Subjects flew the simulator for periods ranging between three and eight hours while exposed to vibrations (at 17 Hz) ranging from 0.1 to 0.3 g, and noise stimuli varying between 74 (ambient) and 100 dB. Despite reports of extreme fatigue on these long flights, subject performance did not degrade. Within the limits of this study, performance tended to improve as environmental stress increased. However, subjects did suffer from lapses resulting in abnormally poor performance. These lapses are probably of short duration (seconds) and occur at unpredictable times. If such lapses occur in actual flight, they could provide an explanation for many so-called 'pilot error' accidents.

Stave, A. M.↗
NASA NTRS1977

Non-linear duct acoustics and its application to fan noise

Quite often the scalar Helmholtz equation is assumed to be the fundamental equation of duct acoustics and various relations are derived from it. An investigation is, therefore, conducted regarding the underlying assumptions leading to the Helmholtz equation. It is found that serious errors, even well below 186 dB, are possible if the assumption of linearity were to be made. In duct acoustics these errors are highest near the cutoff points and in the case of ducts with transonic flow. It is pointed out that serious errors could arise if a nonlinear problem is analyzed by linear methods. At times, an entire phenomenon remains unpredictable by linear methods. Attention is given to the characteristics of nonlinear systems, the phenomenon of multiple pure tones in the case of noise from the aircraft engine fans, the limitations of the conventional acoustics equation, duct shape and nonlinearity, and the numerical simulation of a fan with 8 blades.

Vaidya, P. G.↗
NASA NTRS1978

Instrumentation for measuring the dynamic pressure on rotating compressor blades

To establish the capability for measurement of oscillatory pressure on rotating blades, miniature fast response semiconductor strain gage pressure transducers (2mm x 0.33mm) were mounted in several configurations on thin titanium and steel compressor blades and subjected to pressure cycles from 1 to 310 kPa during static tests and spin tests. Static test conditions included 20 C to 150 C, 0 to 3000 tensile microstrain, -1000 to +1000 bending microstrain and + or - 650G vibration. The spin test conditions included 20 C to 82 C at 0 to 90,000G. Durability was excellent. Pressure transducer sensitivity changed by only a few percent over this range of environmental conditions. Noise signal due to oscillatory acceleration normal to the diaphragm was acceptable (0.33Pa/G). Noise signal due to oscillatory strain was acceptable (0.5 Pa/microstrain) when the transducer was mounted on a 0.05mm rubber pad, with a total buildup of 0.38mm on the measure surface. Back mounting or partial recessing to eliminate buildup, increased the strain effect to 1.2 Pa/microstrain. Flush mounting within the blade to eliminate buildup reduced the strain effect, but required development of a special transducer shape. This transducer was not available in time for spin tests. Unpredictable zero drift + or - 14 kPa ruled out the use of these mounting arrangements for accurate steady-state (D.C.) measurements on rotating blades. The two best configurations fully developed and spin tested were then successfully applied in the NAS3-20606 rotating fan flutter program for quantitative measurement of oscillatory pressure amplitudes.

Grant, H. P.↗
NASA NTRS1979

Stochastic modeling of the time-advanced equations for climate dynamics

Long term, climatologically significant statistical properties of the atmospheric component of the climate system are examined in an effort to correctly and efficiently incorporate this component into larger models for climate that include oceanic and cryospheric influences and deal realistically with climate replication. The magnetic of the unpredictable (noise) component of long term atmospheric behavior is also studied in order to develop the potential for viable climatological forecasting.

Laurmann, J. A.↗
NASA NTRS1977

A dynamic calibrating apparatus for cross derivative experiments

A calibrating apparatus intended to verify the validity of the methodology employed for the determination of aerodynamic cross and cross-coupling moment derivatives has been developed and successfully tested. It has so far been used in the cases of pitching, yawing and plunging oscillation and is soon to be utilized to verify the approach employed in the determination of cross derivatives due to rolling. The apparatus is based on the substitution of generally unpredictable aerodynamic moments by accurately known electromagnetically induced ones that can then be used to verify the correctness of the methods used for the determination of derivatives.

Hanff, E. S.↗
NASA NTRS1978

Chemical alterations of the Holbrook chondrite resulting from terrestrial weathering

Major, minor and trace element analysis as well as noble gas measurements were performed on three Holbrook chondrite samples collected fresh in 1912, in 1931, and in 1968. Decreases in metallic iron and MgO and an increase in total iron were detected. Elemental concentrations of Ti, Ca, Al, P, Mn, Ni, and Cr did not change significantly during weathering. While sodium might have been lost, and K slightly enriched, the trace elements C, Rb, and Sr increased at least two-fold during weathering. Gas abundances decreased, and the concentration ratios of noble gas nuclides varied unpredictably.

Gibson, E. K., Jr.↗
NASA NTRS1979

The dual-momentum control device for large space systems

The dual-momentum control device being studied for large spacecraft consists of two counter-rotating rings, each designated as an annular momentum control device (AMCD). For large rings, flexibility is appreciable and it becomes necessary to account for the distributed nature of the rings in the design of the magnetic bearing controllers. Also, ring behavior is unpredictably sensitive to ring temperature, spin rate, manufacturing imperfections, and other variables. For that reason, an adaptive control system is being sought for ring stabilization and maneuvering. This paper details an original adaptive control methodology for distributed parameter systems and illustrates this technique by application to AMCD stabilization.

Montgomery, R. C.↗
NASA NTRS1979

Singular perturbation techniques for on-line optimal flight path control

This paper presents a partial evaluation on the use of singular perturbation methods for developing computer algorithms for on-line optimal control of aircraft. The evaluation is based on a study of the minimum time intercept problem using F-4 aerodynamic and propulsion data as a base line. The extensions over previous work on this subject are that aircraft turning dynamics (in addition to position and energy dynamics) are included in the analysis, the algorithm is developed for a moving end point and is adaptive to unpredictable target maneuvers, and short range maneuvers that do not have a cruise leg are included. Particular attention is given to identifying those quantities that can be precomputed and stored (as a function of aircraft total energy), thus greatly reducing the onboard computational load. Numerical results are given that illustrate the nature of the optimal intercept flight paths, and an estimate is given for the execution time and storage requirements of the control algorithm.

Calise, A. J.↗
NASA NTRS1979

Long term storage test of titanium material with liquid fluorine propellant

The compatibility of 6AL-4V Ti with propellant grade GF2 and LF2 at 77 K for up to 3 years was investigated. Titanium double coupons, annealed or heat treated, with 16 or 64 RMS finishes, were immersed in F2 in individual Pyrex capsules and stored under LN2 for 29 and 39 months. Pre and post immersion tests were performed on the propellant and coupons. Chemical analysis of the propellant did not reveal any significant changes due to titanium corrosion. Gravimetric, visual, microscopic, and metallurgical examination with pitting analysis did not reveal gross corrosion of the titanium although pitting appears to be greater after 39 months exposure. The increase in pit size and number raises the possibility of unpredictable crack propagation instability. Fracture toughness tests are necessary to define this possibility.

Denson, J. R.↗
NASA NTRS1979

A distributed system adaptive control strategy

One attitude control device being studied for large spacecraft consists of two counter-rotating rings, each designated as an annular momentum control device (AMCD), that are attached to a spacecraft using several magnetic bearings distributed along the circumference of the rings. For large spacecraft large rings are desirable. Unfortunately, for large rings flexibility is appreciable and it becomes necessary to account for the distributed nature of the rings in the design of the magnetic bearing controllers. Also ring behavior is unpredictably sensitive to ring temperature, spin rate, manufacturing imperfections, and other variables. For that reason a distributed adaptive microcomputer-based control system is being sought for ring stabilization and maneuvering. An original adaptive-control methodology for distributed-parameter systems is detailed and application to spinning ring, i.e., AMCD, stabilization is used as an illustration. The proposed methodology, presented as a step-by-step procedure, combines a lumped-parameter expansion description of distributed parameter systems with a fundamental simultaneous identification and control strategy. Simulations are presented providing preliminary evidence of the capabilities of the proposed procedure.

Johnson, C. R., Jr.↗
NASA NTRS1980

Technology transfer of remote sensing technology

The basic philosophy and some current activities of MSFC Technology Transfer with regard to remote sensing technology are briefly reviewed. Among the problems that may be alleviated through such technology transfer are the scarcity of energy and mineral resources, the alteration of the environment by man, unpredictable natural disasters, and the effect of unanticipated climatic change on agricultural productivity.

Smith, A. D.↗
NASA NTRS1980

The effects of cognitive and behavioral control on post-stress performance

A study was designed to investigate the effects of behavioral and cognitive control on post-stress performance. Half of the subjects exposed to loud unpredictable noise bursts were given 'behavioral' control (a button which would terminate the noise), while the other half had no behavioral control. In addition, subjects were provided with one of three levels of feedback (success, failure, or no feedback) regarding their performance during the noise. It was expected that information about performance would provide subjects with an increased sense of 'cognitive' control which would affect their appraisal of stressful events and their later performance. The results indicated that subjects given feedback performed better on subsequent tasks than those given no feedback. Perceived behavioral control had little effect on performance. The causal attributions made by subjects were used to interpret these effects. These findings were viewed as supportive of Averill's (1973) notion that various types of control are related to stress in a complex fashion. The data may also support the reformulation by Abramson et al. (1978) of learned helplessness theory.

Foushee, H. C.↗
NASA NTRS1980

How many theories for the origin of /proto/life

The sequence of primordial chemical events leading to contemporary metabolism is considered, taking into account primordial reactants, amino acids, proteinoid, protocells, ATP, polynucleotides, and protein. The right kind of matter, thermal copolyamino acids, can organize itself into cell-like structures, in the absence of discrete lipid, when triggered to do so by water. Another unpredicted result of examination of the microsystems formed was the step-by-step realization that the component processes of a primitive form of replication were latent in the proteinoid microsystems. At the present time, four modes of primitive replication of proteinoid microsystems have been identified, plus one that has the appearance of protosexual reproduction. Two main conceptual pathways have received attention. One is the proteinoid theory, derived from experiments. The other is the DNA-first theory, for which attempts at conceptual construction and experimental support continue to be sought.

Fox, S. W.↗
NASA NTRS1981

Traveling-wave maser, closed cycle refrigerator automation

At the present time all traveling-wave maser and closed-cycle refrigerator system (TWM-CCR) and their power supply and helium compressor assemblies are operated manually. Many man-hours are required of highly trained and experienced operators, resulting in high operator cost. Of greater importance are the problems of unpredictable failure and long downtimes. Since field performance is not monitored, system degradation is detected only when it has progressed to the point of catastrophic failure. Without the aid of performance histories, failure diagnosis is arduous and slow. Rational and functional requirements for the TWM-CCR Automation project are the following: (1) to improve reliability and reduce downtime by providing unattended monitor and control, alarm and fault location, failure prediction and self-corrective action; (2) to reduce operator cost by providing automatic tuning and cooldown procedures; and (3) to improve system operations and development by providing the needed engineering data.

Mcneil, J. A.↗
NASA NTRS1981

Adaptive control system for large annular momentum control device

A dual momentum vector control concept, consisting of two counterrotating rings (each designated as an annular momentum control device), was studied for pointing and slewing control of large spacecraft. In a disturbance free space environment, the concept provides for three axis pointing and slewing capabilities while requiring no expendables. The approach utilizes two large diameter counterrotating rings or wheels suspended magnetically in many race supports distributed around the antenna structure. When the magnets are energized, attracting the two wheels, the resulting gyroscopic torque produces a rate along the appropriate axis. Roll control is provided by alternating the radiative rotational velocity of the two wheels. Wheels with diameters of 500 to 800 m and with sufficient momentum storage capability require rims only a few centimeters thick. The wheels are extremely flexible; therefore, it is necessary to account for the distributed nature of the rings in the design of the bearing controllers. Also, ring behavior is unpredictably sensitive to ring temperature, spin rate, manufacturing imperfections, and other variables. An adaptive control system designed to handle these problems is described.

Montgomery, R. C.↗
NASA NTRS1982

Some ideas and opportunities concerning three-dimensional wind-tunnel wall corrections

Opportunities for improving the accuracy and reliability of wall corrections in conventional ventilated test sections are presented. The approach encompasses state-of-the-art technology in transonic computational methods combined with the measurement of tunnel-wall pressures. The objective is to arrive at correction procedures of known, verifiable accuracy that are practical within a production testing environment. It is concluded that: accurate and reliable correction procedures can be developed for cruise-type aerodynamic testing for any wall configuration; passive walls can be optimized for minimal interference for cruise-type aerodynamic testing (tailored slots, variable open area ratio, etc.); monitoring and assessment of noncorrectable interference (buoyancy and curvature in a transonic stream) can be an integral part of a correction procedure; and reasonably good correction procedures can probably be developd for complex flows involving extensive separation and other unpredictable phenomena.

Rubbert, P. E.↗
NASA NTRS1980

Forward velocity effects on fan noise and the suppression characteristics of advanced inlets as measured in the NASA-Ames 40 by 80 foot wind tunnel

Forward velocity effects on the forward radiated fan noise and on the suppression characteristics of three advanced inlets relative to a baseline cylindrical inlet were measured in the NASA Ames Research Center 40 x 80 foot Wind Tunnel. A modified JT15D turbofan engine in a quiet nacelle was the source of fan noise; the advanced inlets were a Conventional Takeoff/Landing (CTOL) hybrid inlet, a Short Takeoff/Landing (STOL) hybrid inlet, and a treated deflector inlet. Also measured were the static to flight effects on the fan noise of canting the baseline inlet 4 deg downward to simulate typical wing mounted turbofan engines. The CTOL hybrid inlet suppressed the high tip speed fan noise as much as 18 PNdB on a 61 m (200 ft) sideline scaled to a CF6 size engine while the STOL hybrid inlet suppressed the low tip speed fan noise as much as 13 PNdB on a 61 m (200 ft) sideline scaled to a OCSEE size engine. The deflector inlet suppressed the high tip speed fan noise as much as 13 PNdB at 61 m (200 ft) overhead scaled to a CF6 size engine. No significant changes in fan noise suppression for the CTOL and STOL hybrid inlets occurred for forward velocity changes above 21 m/s (68 ft/s) or for angle of attack changes up to 15 deg. However, changes in both forward velocity and angle of attack changed the deflector inlet noise unpredictably due to the asymmetry of the inlet flow field into the fan.

Moore, M. T.↗
NASA NTRS1982

Experimental evaluation of the concept of supevisory manipulation

A computer-controlled teleoperator system which is based on task-referenced sensor-aided control has been developed to study supervisory manipulation. This system, called SUPERMAN, is capable of performing complicated tasks in real-time by utilizing the operator for high-level functions related to the unpredictable portions of a task, while the subordinate machine performs the more well-defined subtasks under human supervison. To determine whether supervisory control schemes such as these offer any advantage over manual control under real-time conditions, a number of experiments involving both simple and complicated tasks were performed. Six representative tasks were chosen for the study: (1) obtaining a tool from a rack, (2) returning the tool to the rack, (3) removing a nut, (4) placing samples in a storage bin, (5) opening and closing a valve, and (6) digging with a shovel. The experiments were performed under simulated conditions using four forms of manual control (i.e., switch rate, joystick rate, master-slave position control, and master-slave with force feedback), as well as supervisory control. Through these experiments the effectiveness and quality of control were evaluated on the basis of the time required to complete each portion of the task and the type and number of errors which occurred.

Brooks, T. L.↗