Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “twins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Analytical study of twin-jet shielding

An analytical model a three-dimensional model, of twin-jet shielding, consisting of a point noise source impinging on a cylinder of heated flow in which the temperature and flow velocity are uniform across the cross-section is discussed. Wave equations are given for the regions outside the flow and within the flow cylinder and solutions are matched at the jet boundary under the conditions of continuity of pressure and continuity of the vortex sheet. The model was analyzed to identify mechanisms of transmission and diffraction which control sheilding in the shadow of the shielding jet. It was found that in the zone of the shadow region dominates, shielding is relatively insensitive to variations of such parameters as Mach Number and spacing ratio, but in the zone in which diffraction dominates; shielding is more sensitive to variations in Mach Number, jet temperature and spacing ratio.

Gerhold, C. H.↗
NASA NTRS1980

Analytical study of twin-jet shielding

The development of an analytical model, an aircraft noise prediction computer program, to estimate the shielding of one jet by an adjacent jet in a twin jet configuration, is discussed. Noise estimations included consideration not only of noise sources on the aircraft, but also of the propagation path between source and receiver. A three-dimensional case is considered in which noise source is a discrete frequency point source at rest with respect to the jet axis. The shielding jet is assumed to be a cylinder of heated flow in which the temperature and flow velocity profiles are constant across the jet. The effect on shielding of the orientation of the emitting jet with respect to the shielding jet was investigated. Forward and backward scattering phenomena as well as the influence of jet flow speed were also investigated.

Gerhold, C. H.↗
NASA NTRS1980

Analytical study of twin-jet shielding development of a 3-dimensional model

The solution for a point source impinging on a cylinder of heated flow is presented. The indefinite integral is solved approximately using a saddle of point method. Comparison of the three-dimensional model to a previously obtained two-dimensional model of twin jet noise indicate the the approximate solution of the integral is valid. The model was analyzed to differentiate among the mechanims of shielding. Zone in which diffraction and transmission dominate are identified. The model was found to compare to experimental shielding results.

Gerhold, C. H.↗
NASA NTRS1980

Analytical study of twin-jet shielding two-dimensional model

The development of an analytical model to estimate the shielding of one jet by an adjacent jet in a twin jet configuration is discussed in relation to aircraft generated noise. The azimuthal redistribution of sound defining the shadow zone is investigated. Wave equations were solved in the plane normal to the jet axis to estimate the diffraction and reflection of sound by a heated, cylindrical jet. Thus, the noise source considered is essentially a line source assumed to emit at discrete frequency and at rest with respect to the shielding jet which is assumed to be a cylinder of heated flow in which the temperature is constant across the jet. Results show that the sound pressure decreases rapidly with frequency beyond the onset of the shielding to a minimum value. Results also show that increasing the spacing between the source and the jet shifts the curves toward higher frequencies.

Gerhold, C. H.↗
NASA NTRS1982

Cabin Noise Control for Twin Engine General Aviation Aircraft

An analytical model based on modal analysis was developed to predict the noise transmission into a twin-engine light aircraft. The model was applied to optimize the interior noise to an A-weighted level of 85 dBA. To achieve the required noise attenuation, add-on treatments in the form of honeycomb panels, damping tapes, acoustic blankets, septum barriers and limp trim panels were added to the existing structure. The added weight of the noise control treatment is about 1.1 percent of the total gross take-off weight of the aircraft.

Vaicaitis, R.↗
NASA NTRS1982

Simulator study of vortex encounters by a twin-engine, commercial, jet transport airplane

A simulator study of vortex encounters was conducted for a twin-engine, commercial, jet transport airplane encountering the vortex flow field of a heavy, four-engine, commercial, jet transport airplane in the final-approach configuration. The encounters were conducted with fixed controls and with a pilot using a state-of-the-art, manual-control system. Piloted encounters with the base-line vortex flow field out of ground effect (unattenuated) resulted in initial bank-angle excursions greater than 40 deg, coupled with initial sideslip-angle excursions greater than 10 deg. The severity of these initial upsets was significantly reduced when the vortex center was moved laterally or vertically away from the flight path of the encountering airplane. Smaller reductions occurred when the flow field was attenuated by the flight spoilers on the generating airplane. The largest reduction in the severity of the initial upsets, however, was from aging in ground effect. The severity of the initial upsets of the following airplane was relatively unaffected by the approach speed. Increasing the lift coefficient of the generating airplane resulted in an increase in the severity of the initial upsets.

Hastings, E. C., Jr.↗
NASA NTRS1981

Ground effect hover characteristics of a large-scale twin tilt-nacelle V/STOL model

This paper is a summary of an analysis of the ground-effect characteristics of a large-scale twin-engine, tilt-nacelle V/STOL model. The analysis considers data from the flow field beneath the full-scale model, as well as small-scale model test data, and makes comparisons with jet-ground interactions predicted by a computer code. The data from the large-scale test comprise ground-plane surface temperatures, static pressure distribution and wall-jet total-pressure profiles, fuselage undersurface static pressures, and model forces and moments. The results indicate that the near-field flow is more complex than is indicated by either the small-scale uniform jet studies or the computer predictions. The far-field flow characteristics do show some similarity for these three cases.

Dudley, M. R.↗
NASA NTRS1982

Crash tests of four low-wing twin-engine airplanes with truss-reinforced fuselage structure

Four six-place, low-wing, twin-engine, general aviation airplane test specimens were crash tested under controlled free flight conditions. All airplanes were impacted on a concrete test surface at a nomial flight path velocity of 27 m/sec. Two tests were conducted at a -15 deg flight path angle (0 deg pitch angle and 15 deg pitch angle), and two were conducted at a -30 deg flight path angle (-30 deg pitch angle). The average acceleration time histories (crash pulses) in the cabin area for each principal direction were calculated for each crash test. In addition, the peak floor accelerations were calculated for each test as a function of aircraft fuselage longitudinal station number. Anthropomorphic dummy accelerations were analyzed using the dynamic response index and severity index (SI) models. Parameters affecting the dummy restraint system were studied; these parameters included the effect of no upper torso restraint, measurement of the amount of inertia-reel strap pullout before locking, measurement of dummy chest forward motion, and loads in the restraints. With the SI model, the dummies with no shoulder harness received head impacts above the concussive threshold.

Williams, M. S.↗
NASA NTRS1983

Aerodynamic characteristics of a series of twin-inlet air-breathing missile configurations. 2: Two-dimensional inlets at supersonic speeds

A series of air-breathing missile configurations was investigated to provide a data base for the design of such missiles. The model could be configured with either twin axisymmetric or two dimensional inlets. Three circumferential inlet locations were investigated: 90 deg, 115 deg, and 135 deg from the top center. Two vertical wing locations, as well as wingless configurations, were used. Three tail configurations were formed by locating the tail surfaces either on the inlet fairings or on fairings on the body. The surfaces were used to provide pitch control. Two dimensional inlets with extended compression surfaces, used to improve the angle-of-attack performance of the inlets for wingless configurations, were also investigated. The two dimensional inlet configurations are covered.

Hayes, C.↗
NASA NTRS1983

Aeropropulsive characteristics of twin single-expansion-ramp vectoring nozzles installed with forward-swept wings and canards

The Langley 16 foot transonic tunnel was used to determine the aeropropulsive characteristics of twin single-expansion-ramp vectoring nozzles installed in a wing-body configuration with forward-swept wings. The configuration was tested with and without fixed canards. The test conditions included free-stream Mach numbers of 0.60, 0.90, and 1.20. The model angle of attack ranged from -2 deg to 14 deg; the nozzle pressure ratio ranged from 1.0 (jet off) to 9.0. The Reynolds number based on the wing mean aerodynamic chord varied from 3.0 x 10 to the 6th power to 4.8 x 10 to the 6th power, depending on Mach number. Aerodynamic characteristics were analyzed to determine the effects of thrust vectoring and the canard effects on the wing-afterbody-nozzle and the wing-afterbody portions of the model. Thrust vectoring had no effect on the angle of attack for the onset of flow separation on the wing but resulted in reduced drag at angle-of-attack values above that required for wing flow separation. The canard was found to have little effect on the thrust-induced lift resulting from vectoring, since canard effects occurred primarily on the wing.

Mason, M. L.↗
NASA NTRS1983

Pressures measured in flight on the aft fuselage and external nozzle of a twin-jet fighter

Fuselage, boundary layer, and nozzle pressures were measured in flight for a twin jet fighter over a Mach number range from 0.60 to 2.00 at test altitudes of 6100, 10,700, and 13,700 meters for angles of attack ranging from 0 deg to 7 deg. Test data were analyzed to find the effects of the propulsion system geometry. The flight variables, and flow interference. The aft fuselage flow field was complex and showed the influence of the vertical tail, nacelle contour, and the wing. Changes in the boattail angle of either engine affected upper fuselage and lower fuselage pressure coefficients upstream of the nozzle. Boundary layer profiles at the forward and aft locations on the upper nacelles were relatively insensitive to Mach number and altitude. Boundary layer thickness decreased at both stations as angle of attack increased above 4 deg. Nozzle pressure coefficient was influenced by the vertical tail, horizontal tail boom, and nozzle interfairing; the last two tended to separate flow over the top of the nozzle from flow over the bottom of the nozzle. The left nozzle axial force coefficient was most affected by Mach number and left nozzle boattail angle. At Mach 0.90, the nozzle axial force coefficient was 0.0013.

Nugent, J.↗
NASA NTRS1983

Noise transmission through sidewall treatments applicable to twin-engine turboprop aircraft

The noise transmission loss characteristics of the sidewall treatment in the propeller plane of a twin-engine turboprop aircraft are experimentally investigated in the NASA Langley Research Center Transmission Loss Facility. The sound attenuation properties of the individual elements of this treatment are evaluated showing least noise transmission loss in the low frequencies (below 500 Hz) where the excitation levels at the propeller blade passage frequency and the first few harmonics are highest. It is shown that single and double wall resonances play an important role in the noise transmission loss values of the treatment at these low frequencies suggesting that a limp mass with a very low resonance frequency serves better as a trim panel than a trim panel having a high structural stiffness. It is indicated that the window structures might be a potential noise control problem.

Grosveld, F. W.↗
NASA NTRS1983

Modified jet noise source model for twin-jet shielding analysis

An analytical method to estimate the influence that a jet of heated flow has on the noise emission from a parallel jet is presented. The shielding jet is modelled as a cylinder of constant cross-section in which the flow speed and temperature are uniform throughout. The jet noise emission is modelled by a point source with directivity imposed. The directivity term consists of: a self-noise term, a shear-noise term, and a convection factor. The self- and shear-noise terms each contain a basic directivity factor multiplying a spectral shape function. The various components are evaluated based on comparison with isothermal jet radiation experimental data. The modified source term is incorporated into the jet shielding model and compared to heated twin jet shielding data. The estimated spectra agree well except further downstream of the nozzle where peak of the noise spectrum estimated by the model lies approximately one octave below the experimental peak. The noise reduction estimated by the model agrees favorably with experiment in the near downstream region. This discrepancy is explained in terms of the shielding mechanism which is dominant far downstream.

Gerhold, C. H.↗
NASA NTRS1983

Investigation of installation effects on twin-engine convergent-divergent nozzles

An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine installation effects on convergent-divergent nozzles applicable to twin-engine reduced-power supersonic cruise aircraft. Tests were conducted at Mach numbers from 0.50 to 1.20, angles of attack from -5 deg to 9 deg, and at nozzle pressure ratios from jet off (1.0) to 8.0. The effects of empennage arrangement, nozzle length, and afterbody closure on total and component drag coefficients were investigated.

Bare, E. A.↗
NASA NTRS1983

Analytical study of the twin-jet shielding

The development of the analytical model of twin-jet shielding is summarized. The models consist of a point noise source impinging on a cylinder of heated flow in which the temperature and flow velocity are uniform cross the cross section. In the formulation of the model, the wave equations are written for the regions outside the flow and within the flow cylinder. The solutions to the wave equations are matched at the jet boundary under the conditions of continuity of pressure and continuity of the vortex sheet. The solution reduces to an indefinite integral involving Bessel functions. The integral is solved approximately using a saddle point method.

Gerhold, C. H.↗
NASA NTRS1983

Handling characteristics of a simulated twin tilt nacelle V/STOL aircraft

The first government-conducted piloted flight simulation of the Grumann-designed twin turbofan-powered tilt-engine V/STOL aircraft (design 698) was conducted at NASA Ames Research Center. The aircraft is discussed with an emphasis on its unique hover characteristics. These chracteristics include the adverse nonminimum phase that occurs in lateral and longitudinal translation, and the large attitude control power available. Both of these features are attributes of the control vanes (a Grumman-patented concept) buried in the fan exhaust flow. The simulation used the following NASA Ames Research Center facilities: the Vertical Motion Simulator with the interchangeable cab, the Sigma 8 computer, and the Computer-Generated Image system with a four-window display.

Wilson, S. B., III↗
NASA NTRS1984

Winglet effects on the flutter of twin-engine-transport type wing

Flutter characteristics of a cantilevered high aspect ratio wing with winglet were investigated. The configuration represented a current technology, twin-engine airplane. A low-speed and a high-speed model were used to evaluate compressibility effects through transonic Mach numbers and a wide range of mass-density ratios. Four flutter mechanisms were obtained in test, as well as analysis from various combinations of configuration parameters. The coupling between wing tip vertical and chordwise motions was shown to have significant effect under some conditions. It is concluded that, for the flutter model configurations studied, the winglet related flutter was amenable to the conventional flutter analysis techniques.

Bhatia, K. G.↗