SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Potassium fluoride (KF) incorporation to an SnO 2 nanoparticles (NPs) colloidal dispersion for an electron transport layer of enhanced performance and stability for a perovskite solar cell with improved uniformity of the deposited SnO 2 layer.
Triphilic organochalcogen compounds are added to solid-state sulfur cathodes to establish intimate and durable interfacial contact among cathode components, enhancing ion and electron transport, active material utilization, and cycling stability.
Abstract Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g. two-level systems) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, j c , in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract j c and try to correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.
We investigate and compare the electronic structure of OsO 2 with the extensively studied RuO 2 . Calculations show that OsO 2 exhibits antiferromagnetism and spin splitting driven by crystal symmetry, a characteristic of altermagnetism and similar to RuO 2 . Examination of the Fermi surface, with and without spin-orbit coupling, reveals that OsO 2 has lower Fermi group velocities compared to RuO 2 , suggesting limited charge carrier mobility in OsO 2 . While this characteristic may constrain its performance in high-speed electronic transport applications, it may also enhance stability for spin-based information storage in spintronics. Additionally, comparison of the vibrational properties of these rutile oxide systems demonstrates dynamical stability, typical mass dependent behaviors, and favorable agreement with measured Raman data. The calculated phonon density of states for RuO 2 also agrees with our neutron scattering data. These observations substantiate the implications of the electronic and vibrational behaviors in OsO 2 and RuO 2 , encouraging further investigation of their potential for emerging technological applications.
Per- and polyfluoroalkyl substances (PFAS) are a group of industrial and commercial chemicals widely used throughout the world due to their beneficial chemical properties. Because of their widespread use, their chemical stability, and their ability to be transported over long distances through atmospheric deposition and movement through waterways, PFAS are found throughout most aquatic ecosystems; yet large sampling gaps exist among reservoir and river ecosystems in the desert southwest of the United States. In this study, we examine PFAS concentrations in the tissue of fish (catfish [channel and blue], common carp, smallmouth bass, northern pike, walleye, white crappie and white sucker) collected in northern New Mexico, including examining PFAS composition and concentration relative to trophic level distribution. We collected fish from two man-made reservoirs and from the Rio Grande. We then collected muscle and liver tissues from fish specimens, which were screened for 39 PFAS compounds. We detected PFAS compounds in most fish tissue sampled, including the biomagnification of PFAS compounds within liver samples, with PFOS concentrations ranged from 1.13 to 350.1 (64.4 average) times higher in the liver samples compared to muscle samples. Most PFAS concentrations within muscle samples were within the range of atmospheric transportation previously reported and average tissue concentrations of PFAS were calculated to be 2.02 ± 1.81 ng g -1 . Using stable isotopes as a predictor of trophic-foraging exposure and PFAS concentrations, we noted a correlation between enriched δ 15 N values, which had higher perfluorodecanoic acid concentrations.
Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g., two-level systems, TLS) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, $j_{c}$, in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract $j_{c}$ and correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.
Stability constraints play an important role in integrated modeling. The global plasma stability and macro-instabilities such as internal kink modes, neoclassical tearing modes, and edge localized perturbations limit the plasma performance and can result in large-scale transient events and plasma disruptions. These macro-instabilities can be also beneficial to the plasma performance. For example, the peeling models often lead to the edge localized modes (ELMs). However, the formation of stationary edge harmonic oscillations (EHOs) due to nonlinear interaction of peeling modes can result in a transition to the Quiescent H-mode (QH-mode) without ELMs. The profiles predicted with transport models need to be refined using the MHD stability constraints. This is important especially for transient and nonlinear stages of discharges such as ramp-up access to hybrid and steady state operation, and L- to H-mode transition as well as transition to the QH-mode. Several stability and MHD codes are already included in the OMFIT framework. These codes include BALOO, ELITE, GATO, M3DC1, MARS, and NIMROD. However, the verifications of stability constraints are currently mostly excluded from transport modeling workflows. The only exception is the EPED module which includes the ELITE predictions to limit the pedestal height. Here, we improved the OMFIT workflow to include stability calculations. Including the stability conditions to the integrated modeling workflow improved the robustness of the predictive modeling discharges. Being implemented in the workflow, the stability conditions can be also used for the stability analysis of experimental data. This improved the physics understanding of various discharge scenarios and can be used in experiment planning.
Abstract The performance of fusion devices relies strongly on the good confinement of energetic particles (EPs). Therefore, the investigation of EP transport by magnetohydrodynamic instabilities is one of the key aspects in the development of plasma scenarios. Alfvénic instabilities in particular can lead to significant losses of alpha particles that are essential for plasma self-heating. A so-called afterglow scheme has been developed to study the destabilization of Alfvén eigenmodes (AEs) by alpha particles and associated EP transport in the JET tokamak. In this work, the linear stability of AEs is discussed for the partial afterglow phase in a JET deuterium plasma discharge and for the full afterglow phase in a projected deuterium–tritium (DT) plasma. Thanks to recent upgrades in the tokamak transport code TRANSP, one can account for the contributions of different EP species to mode stability. Analysis of deuterium plasmas shows that AE growth rates are extremely sensitive to the energy and distribution of fast ions. An increase in fast ion energy can lead to more unstable AEs. In the afterglow phase of projected DT plasmas, it is EPs that mostly drive the AEs. However, the drive by alpha particles is comparable to that by beam ions and their contribution to the net growth rate might be hard to separate. According to the discussed projections, the destabilization of AEs might be ineffective because the background plasma damping significantly exceeds the EP drive. In this case, the development of an alternative plasma scenario that allows us to overcome such damping would be required in future experiments.
Increasing battery energy density is greatly desired for applications such as portable electronics and transportation. However, many next-generation batteries are limited by electrolyte selection because high ionic conductivity and poor electrochemical stability are typically observed in most electrolytes. For example, ether-based electrolytes have high ionic conductivity but are oxidatively unstable above 4 V, which prevents the use of high-voltage cathodes that promise higher energy densities. In contrast, hydrofluoroethers (HFEs) have high oxidative stability but do not dissolve lithium salt. Here, we synthesize a new class of fluorinated ether electrolytes that combine the oxidative stability of HFEs with the ionic conductivity of ethers in a single compound. We show that conductivities of up to 2.7 × 10 –4 S/cm (at 30 °C) can be obtained with oxidative stability up to 5.6 V. The compounds also show higher lithium transference numbers compared to typical ethers. Furthermore, we use nuclear magnetic resonance (NMR) and molecular dynamics (MD) to study their ionic transport behavior and ion solvation environment, respectively. Finally, we demonstrate that this new class of electrolytes can be used with a Ni-rich layered cathode (NMC 811) to obtain over 100 cycles at a C/5 rate. The design of new molecules with high ionic conductivity and high electrochemical stability is a novel approach for the rational design of next-generation batteries.
Based on the theory of critical gradient model (CGM) and following the simulation method proposed by Waltz et al., a combination of TGLFEP and EPtran code is employed to predict the energetic particle (EP) transport induced by Alfvén eigenmodes (AEs). To be consistent with the experiment, recent improvements to the simulation method include consideration of threshold evolution and orbit loss due to finite orbit width. The revised CGM is applied to simulate two DIII-D experimental discharges (#142111 and #153071). It well reproduces the experimental profiles with multiple unstable AEs and large-scale EP transport. Discharge #142111 had previously been simulated using a nonlinear MHD-kinetic code MEGA with a transport mechanism based on stochasticity induced by overlapping AE. By comparing the simulated EP profiles, we find that the AE transport threshold is approximated by both the MEGA nonlinear stability threshold and the proposed CGM threshold (error <5% for single n and <17% for multiple n simulation). Both of them are larger than the linear stability threshold of the most unstable AE mode by a quantity of the order of the flux needed to sustain EP transport by the background turbulence. Additionally, we have also applied the improved CGM to simulate the α particle redistribution for a China Fusion Engineering Test Reactor steady state scenario. Because of the clear separation between the AE unstable region and the loss cone, only a moderate α particle loss of ~9.6% is predicted.
Structural materials in nuclear environments are exposed to complex and harsh conditions, including high temperatures, corrosive solutions, and irradiation. Material stability and likewise degradation are fundamentally controlled by atomic transport mechanisms. Here, we investigate the influence of radiation-induced, non-equilibrium point defect populations on mass transport within model oxide systems using isotopic tracers and atom probe tomography. An isotopically labelled hematite (a-Fe2O3) film was synthesized with 16O- and 18O-rich layers (>30nm and 10 nm, respectively) sequentially deposited via molecular beam epitaxy. One region of the film was proton irradiated to ~0.1 dpa at 450°C, and regions outside the beam spot provided a non-irradiated control of thermal annealing only. 3D APT was used to directly visualize the elemental and O-isotopic redistribution following both thermal and combined thermal and irradiation conditions. Complementary scanning transmission electron microscopy (STEM) was also employed to study the microstructural evolution. Error function fits of the 18O-concentration profiles enabled quantification of diffusion coefficients.
Ineffectiveness of Li-ion batteries (LIBs) in cold climates hinders electronics to work in various conditions including frigid environments, despite high demands. Given that intrinsic properties of LIB materials cause this problem, optimized cell chemistries ultimately are required for low-temperature usage. In this study, Li-metal batteries (LMBs) composed of a Li-metal anode (LMA) stabilized by a localized high-concentration electrolyte (LHCE) are found to significantly enhance low-temperature performance. The LHCE allows the LMA to have compact and regular deposition and excellent plating/stripping efficiency at sub-zero temperatures. The LHCE produces an inorganic-rich solid-electrolyte interphase with larger amounts of Li 2 O/LiF interfaces, dominance of ion aggregates in Li + solvation, and enhanced Li + transport, which can greatly improve the LMA stability. LMB full cells based on LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes with the tailored electrolyte show high retentions of 75 and 64 % at -20 and -40 °C, respectively. Furthermore, the LMB configuration retains its charge-discharge capability even at -60 °C.
Charged conjugated organic molecules offer promising prospects for reducing nonradiative recombination at interfaces in perovskite solar cells, while protecting the active layer from moisture. However, several studies have shown that the heat induced diffusion of these cations leads to irreversible solar cell degradation. Passivation molecules for perovskite can reconstruct the film surface into lower-dimensional phases when exposed to thermal stress, impeding charge extraction and affecting the photoconversion efficiency (PCE) of devices. In this work, we study how molecular interactions between passivation molecules and 3D CsFAPbI 3 perovskite impact stability and charge extraction at the perovskite/hole transport layer interfaces. Two model π- conjugated molecules are studied: 2-([2,2′-bithiophen]-5-yl)ethan-1-aminium iodide (2TI) and 2-(3‴,4′-dimethyl-[2,2′:5′,2″:5″,2‴- quaterthiophen]-5-yl)ethan-1-ammonium iodide (4TmI). We demonstrate that the speed of surface layer reconstruction under thermal stress can be controlled by the cation size and correlate these structural changes with the solar cell performance and stability. Devices treated with 2TI and 4TmI achieve PCEs over 21% and maintain their performance under thermal stress. Our findings demonstrate that thermal stability in PSCs can be achieved via the design engineering of passivation agents, offering a blueprint for developing next-generation passivation molecules.
This study compares the impacts of Arctic sea ice decline on the Atlantic meridional overturning circulation (AMOC) in two configurations of the Community Earth System Model with different horizontal resolution. In a suite of model experiments, we impose radiative imbalance at the ice surface, replicating a loss of sea ice cover comparable to that observed during 1979–2014, and we find dramatic differences in the AMOC response between the two models. In the lower-resolution configuration, the AMOC weakens by about one-third over the first 100 years, approaching a new quasi-equilibrium. By contrast, in the higher-resolution configuration, the AMOC weakens by ~10% during the first 20–30 years followed by a full recovery driven by invigorated deep water formation in the Labrador Sea and adjacent regions. We investigate these differences using a diagnostic AMOC stability indicator, which reflects the AMOC freshwater transport in and out of the basin and hence the strength of the basin-scale salt-advection feedback. This indicator suggests that the AMOC in the lower-resolution model is less stable and more sensitive to surface perturbations, as confirmed by hosing experiments mimicking Arctic freshening due to sea ice decline. Differences between the models’ mean states, including the Atlantic Ocean mean surface freshwater fluxes, control the differences in AMOC stability. Our results demonstrate that the AMOC stability indicator is indeed useful for evaluating AMOC sensitivity to perturbations. We emphasize that, despite the differences in the long-term adjustment, both models simulate a multidecadal AMOC weakening caused by Arctic sea ice decline, relevant to climate change.
Wide pedestal quiescent H (WPQH)-mode is an attractive scenario for future burning plasmas as they operate without ELMs. WPQH is characterized by formation of a wider and higher pedestal (than quiescent H-mode), and broadband fluctuations in the pedestal. Unlike conventional H-modes, where the energy confinement time reduces with increasing heating power, the WPQH plasmas reported in this paper do not show power degradation of the energy confinement. As the injected neutral beam power was increased, reduced core (ρ ≤ 0.45) transport calculated by transp, as well as increased core temperatures, pressure gradient and diamagnetic E × B shear rate were observed. The reduction in the heat transport and rapid decrease in the ion temperature gradient scale length suggest the formation of an ion internal transport barrier (ITB) that was accompanied by increased stored energy in the core. Quasilinear turbulent transport modeling using the trapped gyro Landau fluid (tglf) code was used to predict the ITB and its turbulence stability properties. By using profiles and equilibria produced by matching the transp transport fluxes with the tglf transport model within the tgyro transport solver, the energy confinement time captures the experimentally observed insensitivity to the increased PNBI. Linear stability analysis reveals that drift-wave instabilities in the core are stabilized by E × B shear, T i /T e ratio and Shafranov shift; the latter was found to have the strongest effect on the turbulence suppression at the highest heating level.
The continuous demand for efficient, nontoxic, and thermally stable materials for room-temperature energy conversion motivates the exploration of novel thermoelectric systems beyond the traditional magnetic Heusler alloys. While full and half-Heusler compounds, especially Co-, Ni-, and Mn-based systems, have demonstrated promising thermoelectric properties, their typically high operating temperatures and magnetic complexities limit their applicability in ambient thermal management. In this context, we investigate whether Sc-based inverse Heusler alloys can offer a viable nonmagnetic alternative with competitive thermoelectric performance. In this work, we perform a systematic first-principles study of the inverse Heusler compounds Sc 2 RuZ (Z = Si, Ge, Sn), focusing on their structural, electronic, mechanical, and thermodynamic-thermoelectric properties. Density Functional Theory (DFT) was employed to compute optimized lattice structures and band dispersion, while dynamical stability was assessed via phonon calculations. Thermoelectric transport coefficients, including Seebeck coefficient, electrical conductivity, and thermal conductivity, were estimated using the semiclassical Boltzmann transport theory within the constant relaxation time approximation. Our results show that all Sc 2 RuZ compounds are thermodynamically stable semiconductors with indirect band gaps of 0.12–0.16 eV and exhibit high elastic moduli, especially Sc 2 RuSn, which demonstrates superior stiffness and incompressibility. Importantly, all compounds display promising room-temperature thermoelectric characteristics, including high Seebeck coefficients and power factors. These findings reveal that Sc 2 RuZ alloys represent a rare class of stable, nonmagnetic inverse Heusler semiconductors with intrinsic thermoelectric potential at room temperature, unlike many existing Heusler systems optimized for spintronics or high-temperature operation. This work expands the known design space for Heusler-based thermoelectrics and offers a theoretical basis for experimental realization of efficient, low-temperature, nonmagnetic thermoelectric materials.
This report critically reviews the flow behavior of hydrogen-natural gas (H 2 -NG) mixtures in pipelines and examines the critical factors of hydrogen integration into existing natural gas infrastructure. It addresses the choking behavior characterized by velocity increase and pressure drop, as well as the effects of flow restrictions and pressure losses during hydrogen transport. Computational and analytical models are used to investigate these effects, and their effects on thermodynamic properties and system performance are evaluated. The study also reviews the energy efficiency and flow dynamics of hydrogen and methane-hydrogen mixtures and optimizes the hydrogen flow rate. In addition, the effects of these mixtures on the flow characteristics are discussed in detail, with special emphasis on the compressibility factor (z factor) and fluid properties based on equations of state for hydrogen-natural gas mixtures. The study also analyzes the mixture ratios and highlights the thermophysical properties, flow dynamics, and hydrogen-blended natural gas application potential. These investigations assess flow stability, material interactions, and operational feasibility of transporting hydrogen mixtures through natural gas pipelines, which contribute to developing sustainable and efficient energy systems.
The impact of sheared ${\mathbf{E} \hskip -1pt \times \hskip -1pt \mathbf{B}}$ flow on multiscale turbulence is studied with nonlinear gyrokinetic simulations. Simulations are based on DIII-D-like, high-confinement mode (H-mode) pedestal parameters in the regime of low ion temperature gradient drive, where there is a broad spectrum of electron temperature gradient (ETG)-driven turbulence. It is found that ${\mathbf{E} \hskip -1pt \times \hskip -1pt \mathbf{B}}$ shear can have a significant effect on ETG-driven electron transport, with an unexpected transition from a turbulence stabilization regime at moderate to large shearing rates $γ_E$ to a novel turbulence destabilization regime at low levels of $γ_E$. In the turbulence stabilization regime, the electron energy flux decreases monotonically with $γ_E$, even when $γ_E$ is small compared to electron mode growth rates. The stabilizing effect comes dominantly from the electron, not ion, gyrokinetic equation. In the novel destabilization regime, reduction of zonal energy results from the interaction of $γ_E$-modulated nonlinear drive in the zonal ion gyrokinetic equation, increasing the electron transport over a broad range of shearing rates. Finally, neither of these effects has been observed in previous electron-scale simulations.