Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “texture (materials)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Elucidating the structural properties and reversible regional texture effect of GdB 6 under high pressure

As hard and refractory materials with high chemical resistance and mechanical strength, lanthanide hexaborides (LnB 6 ) have attracted much attention. Among the family of LnB 6 , gadolinium hexaboride (GdB 6 ) occupies a special position due to the half-filled 4f shell of Gd. Here, using in situ synchrotron radiation angle-dispersive X-ray diffraction in a diamond anvil cell at room temperature, the structural stability and compression behavior of GdB 6 are investigated extensively, GdB 6 is observed to be structurally stable up to 73 GPa, and the bulk modulus of 177 GPa is obtained under hydrostatic compression. In this paper, an interesting observation of pressure-induced spotty diffraction rings of GdB6 is reported, its formation mechanism can be well described by the reversible regional texture effect, which highlights the rearrangement of crystal grains under high pressure. The rearrangement mechanism has been well explained by investigating the pressure dependence of full width at half maximum, macro-differential stress and grain size. Collective grain rotation behavior motivated by stress difference is critical for the rearrangement process, the strong isotropy and strong stability of GdB 6 structure also provide necessary conditions for high-pressure grain rotation behavior. These results will help to promote the understanding of high-pressure structural properties of GdB 6 , and provide novel insights on the high-pressure grain behavior in hard materials with strong isotropy and three-dimensional skeleton constituted of strong covalent bonds.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reversible hydrogen control of antiferromagnetic anisotropy in α-Fe 2 O 3

Antiferromagnetic insulators are a ubiquitous class of magnetic materials, holding the promise of low-dissipation spin-based computing devices that can display ultra-fast switching and are robust against stray fields. However, their imperviousness to magnetic fields also makes them difficult to control in a reversible and scalable manner. Here we demonstrate a novel proof-of-principle ionic approach to control the spin reorientation (Morin) transition reversibly in the common antiferromagnetic insulator α-Fe 2 O 3 (haematite) - now an emerging spintronic material that hosts topological antiferromagnetic spin-textures and long magnon-diffusion lengths. We use a low-temperature catalytic-spillover process involving the post-growth incorporation or removal of hydrogen from α-Fe 2 O 3 thin films. Hydrogenation drives pronounced changes in its magnetic anisotropy, Néel vector orientation and canted magnetism via electron injection and local distortions. We explain these effects with a detailed magnetic anisotropy model and first-principles calculations. Tailoring our work for future applications, we demonstrate reversible control of the room-temperature spin-state by doping/expelling hydrogen in Rh-substituted α-Fe 2 O 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

The impact of anisotropic thermal expansion on the isothermal annealing of polycrystalline α -uranium

Although grain growth impacts microstructural evolution in a wide variety of materials systems, the effect of anisotropic thermal expansion on grain boundary mobility and texture evolution has not been widely studied. Anisotropic thermal expansion occurs in multiple non-cubic metals, and the thermomechanical processing behavior of these materials can be better understood with further study into the impact of thermal expansion on grain boundary mobility and texture evolution. In this work, we develop a mesoscale phase field model of grain growth that includes the effect of anisotropic thermal expansion, which is applied to study polycrystalline α-uranium, a highly anisotropic metal. Three-dimensional simulations on polycrystalline a-uranium with and without thermal expansion eigenstrains are performed to study the grain boundary mobility and texture evolution as a function of temperature. A strain-free temperature of 933 K is selected, and the system is studied at within the range of 873 – 933 K at intervals of ten degrees, resulting in increasing thermal eigenstrain with decreasing temperature. We also estimate a grain boundary mobility prefactor and activation energy based on existing experimental data of isothermal annealing of α-uranium. The grain boundary mobility is found to display significant deviation from Arrhenius behavior with the inclusion of thermal expansion eigenstrain as the amount of thermal eigenstrain (and thus elastic strain energy within the system) increases. This result explains an experimentally observed grain boundary mobility deviation from Arrhenius behavior. Furthermore, the texture evolution is affected, such that the grain orientations become less random with increasing thermal eigenstrain, which could explain experimentally observed texture behavior. These results indicate that the effect of thermal expansion should be considered when predicting the thermomechanical processing behavior of α-uranium and other materials with anisotropic thermal expansion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Creep Deformation and Dynamic Grain Growth in an Interstitial-Free Steel

Dynamic grain growth is demonstrated to be much faster than static grain growth in a body-centered-cubic, interstitial-free steel sheet material at 850°C. Dynamic grain growth occurs during concurrent plastic deformation at elevated temperature, whereas static grain growth occurs during static annealing. Grain growth during steady-state plastic flow in tension at 850°C to a true strain of 0.2 at a true-strain rate of 10 -4 s -1 doubled grain size, while static annealing for the same time produced no increase in grain size. This is described as dynamic normal grain growth (DNGG) because no abnormally large grains were observed. The recrystallized microstructure of the steel demonstrated a log-normal distribution of grain sizes. DNGG produced bimodal grain size distributions that deviate from the theoretical expectation of a simple shift to larger sizes during normal growth. The bimodal distributions contained a remnant of small grains that were not consumed during grain growth. DNGG produced a crystallographic texture that is unique from both the recrystallized material and that produced by lattice rotation alone. DNGG strengthened the {111}⟨110⟩ and {111}⟨112⟩ components of the strong γ-fiber component in the original recrystallization texture. Lattice rotation from tensile deformation, by contrast, strengthened the α-fiber components that intersect the original γ-fiber.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Genetic Relationships Between Chondrules, Rims and Matrix

The most primitive chondrites are composed of chondrules and chondrule fragments, various types of inclusions, discrete mineral grains, metal, sulfides, and fine-grained materials that occur as interchondrule matrix and as chondrule/inclusion rims. Understanding how these components are related is essential for understanding how chondrites and their constituents formed and were processed in the solar nebula. For example, were the first generations of chondrules formed by melting of matrix or matrix precursors? Did chondrule formation result in appreciable transfer of chondrule material into the matrix? Here, we consider three types of data: 1) compositional data for bulk chondrites and matrix, 2) mineralogical and textural information, and 3) the abundances and characteristics of presolar materials that reside in the matrix and rims. We use these data to evaluate the roles of evaporation and condensation, chondrule formation, mixing of different nebular components, and secondary processing both in the nebula and on the parent bodies. Our goal is to identify the things that are reasonably well established and to point out the areas that need additional work.

Huss, G. R.↗
NASA NTRSDate not supplied

Mineralogical Variation of the C1 Lithologies in the Kaidun Meteorite

The Kaidun meteorite is a polymict microbreccia, characterized by the presence of numerous clasts of various chondritic and achondritic materials. Chondritic clasts are C1, C2, CM1, CM2, CV3, EH3-5, EL3, and ordinary chondrite-related materials [1,2]. There is significant evidence that aqueous alteration in the carbonaceous chondrite clasts in Kaidun occurred primarily in their parent bodies prior to accumulation to the Kaidun body. Thus, the observation of highly aqueously altered materials (C1 clasts) can provide quantitative constraints on the geologic history of the asteroidal parent bodies. Additionally, the lack of petrological features complicates the classification of C1 materials, but recent studies of new meteorite falls and Ryugu samples continue to emphasize the diversity of C1 materials [e.g., 3,4]. Considering the unprecedentedly diverse origin of clasts in Kaidun, it is expected to contain unknown C1 materials, including ungrouped C1, which will further increase the diversity of those materials. Therefore, this study aims to systematically understand C1 materials by comparing Kaidun C1 with known C1s such as CI1, CM1 and CR1. Since textural observations and chemical composition analyses of carbonates, sulfides, and phyllosilicates in C1 materials in Kaidun have not yet been adequately performed, this study focuses mainly on such analyses.

K. Ogiya↗
NASA NTRS1992

Characterization of selected LDEF-exposed polymeric films

The characterization of selected experimental and commercially available thin polymeric films which received 10 months of exposure to the LEO environment on the Long Duration Exposure Facility is reported. The visual appearance of most specimens changed due to exposure. However, except for a silicon-containing copolymer film, chemical characterization including infrared, thermal, and X-ray photoelectron analyses showed that the molecular structure of the surviving material had not changed significantly in response to exposure. Surface texturing due to atomic oxygen erosion was documented using various microscopic analyses. The possibility of continued post-exposure degradation of some polymeric materials is proposed.

Young, Philip R.↗
NASA NTRS2007

Comparison of the Atomic Oxygen Erosion Depth and Cone Height of Various Materials at Hyperthermal Energy

Atomic oxygen readily reacts with most spacecraft polymer materials exposed to the low Earth orbital (LEO) environment. If the atomic oxygen arrival comes from a fixed angle of impact, the resulting erosion will foster the development of a change in surface morphology as material thickness decreases. Hydrocarbon and halopolymer materials, as well as graphite, are easily oxidized and textured by directed atomic oxygen in LEO at energies of approx.4.5 eV. What has been curious is that the ratio of cone height to erosion depth is quite different for different materials. The formation of cones under fixed direction atomic oxygen attack may contribute to a reduction in material tensile strength in excess of that which would occur if the cone height to erosion depth ratio was very low because of greater opportunities for crack initiation. In an effort to understand how material composition affects the ratio of cone height to erosion depth, an experimental investigation was conducted on 18 different materials exposed to a hyperthermal energy directed atomic oxygen source (approx.70 eV). The materials were first salt-sprayed to provide microscopic local areas that would be protected from atomic oxygen. This allowed erosion depth measurements to be made by scanning microscopy inspection. The polymers were then exposed to atomic oxygen produced by an end Hall ion source that was operated on pure oxygen. Samples were exposed to an atomic oxygen effective fluence of 1.0x10(exp 20) atoms/sq cm based on Kapton H polyimide erosion. The average erosion depth and average cone height were determined using field emission scanning electron microscopy (FESEM). The experimental ratio of average cone height to erosion depth is compared to polymer composition and other properties.

Waters, Deborah L.↗
DOE OSTI2024

Ruthenium supported on silicate and aluminosilicate mesoporous materials applied to selective sugar hydrogenation: Xylose to xylitol

A series of ruthenium-based catalysts supported on a set of silicate and aluminosilicate mesoporous molecular sieves was synthesized and tested in xylose hydrogenation. The materials were characterized in terms of morphology, textural properties, acidity, as well as ruthenium loading, dispersion, and oxidation state. In general, the aluminosilicates-based catalysts displayed a higher activity compared to their respective silicate supports, which can be ascribed to a higher Ru content and dispersion, enhanced by a higher acidity. The most active synthesized catalyst (Ru/Al-MCM-4) displayed an improved performance compared to a commercial Ru/C catalyst due to a better xylitol selectivity. Two modelling approaches were implemented to describe the kinetic rate. The first model was based on the hypothesis that xylose molecules and hydrogen are adsorbed in different active sites on the catalyst surface, while the second model supposes the formation of an intermediate on the catalyst surface that reacts to form xylitol. Both models gave a very good description of the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photoactivated p-Doping of Organic Interlayer Enables Efficient Perovskite/Silicon Tandem Solar Cells

Solution-processed organic semiconductor layers on rough surfaces tend to vary widely in thickness, significantly hindering charge extraction in relevant optoelectronic devices. Herein, we report the photoactivated p-doping of hole-transporting material (HTM) to enhance hole extraction for (textured) perovskite/silicon tandem solar cells, making the device performance less sensitive to the variation of hole transport layer thickness. We used the ionic compound 4-isopropyl-4'-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate) (DPI-TPFB) as a p-type dopant in poly(triaryl amine) (PTAA), which we used as the HTM. We observed that light soaking DPI-TPFB-doped PTAA shows approximately 22 times higher conductivity compared with an undoped PTAA film, which translated into an improved fill factor (FF) for tandem solar cells. Our tandem solar cells achieved an ~80% FF and 27.8% efficiency and operated at their maximum power point for 200 h without loss of performance, in addition to retaining ~83% of initial performance over a month of operation in an outdoor environment.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,S↗
DOE OSTI2020

One-dimensional antilocalization of electrons from spin disorder probed by nonlinear Hall effect

In recent years, nonreciprocal transport measurement has emerged as a probe of spin orbit interaction, spin texture, superconductivity, and other fundamental properties of materials. Here, we study the nonlinear Hall effect (NLHE) in Bi 2 Se 3 /CoFeB heterostructures measured by second harmonic voltage method. Magneto-optical Kerr effect measurements demonstrate the origin of the NLHE to be the asymmetric magnon scattering mechanism. Moreover, a linear relation between the nonlinear Hall resistance and the electron phase coherence length of Bi 2 Se 3 is observed between 5 and 50 K. In this work, we propose a phenomenological model that explains the enhancement of the NLHE below 50 K as a result of one-dimensional antilocalization of electrons from spin disorder, enabled by spin-momentum locking and conservation of angular momentum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Pseudospectral Landau-Lifshitz description of magnetization dynamics

Magnetic materials host a wealth of nonlinear dynamics, textures, and topological defects. This is possible due to the competition between strong nonlinearity and dispersion, which act at the atomic scale, as well as long-range interactions. However, these features are difficult to study analytically and numerically because of the vastly different temporal and spatial scales involved. Here, in this work, we present a pseudospectral approach for the Landau-Lifshitz equation that invokes energy and momentum conservation embodied in the magnon dispersion relation to accurately describe both atomic and continuum limits. Furthermore, this approach enables analytical study at every scale. We show the applicability of this model in both the continuum and atomic limit by investigating modulational instability and ultrafast evolution of magnetization due to transient grating, respectively, in a one-dimensional ferromagnetic chain with perpendicular magnetic anisotropy. This model provides the possibility of grid-independent multiscale numerical approaches that will enable the description of singularities within a single framework.

1-dimensional spin chains↗
NASA NTRS1977

Industrial ion source technology

Plasma probe surveys were conducted in a 30-cm source to verify that the uniformity in the ion beam is the result of a corresponding uniformity in the discharge-chamber plasma. A 15 cm permanent magnet multipole ion source was designed, fabricated, and demonstrated. Procedures were investigated for texturing a variety of seed and surface materials for controlling secondary electron emission, increasing electron absorption of light, and improved attachment of biological tissue for medical implants using argon and tetrafluoromethane as the working gases. The cross section for argon-argon elastic collisions in the ion-beam energy range was calculated from interaction potentials and permits calculation of beam interaction effects that can determine system pumping requirements. The data also indicate that different optimizations of ion-beam machines will be advantageous for long and short runs, with 1 mA-hr/cm being the rough dividing line for run length. The capacity to simultaneously optimize components in an ion-beam machine for a single application, a capacity that is not evident in competitive approaches such as diode sputtering is emphasized.

Kaufman, H. R.↗
NASA NTRS2013

Curiosity's Mars Hand Lens Imager (MAHLI): Inital Observations and Activities

MAHLI (Mars Hand Lens Imager) is a 2-megapixel focusable macro lens color camera on the turret on Curiosity's robotic arm. The investigation centers on stratigraphy, grain-scale texture, structure, mineralogy, and morphology of geologic materials at Curiosity's Gale robotic field site. MAHLI acquires focused images at working distances of 2.1 cm to infinity; for reference, at 2.1 cm the scale is 14 microns/pixel; at 6.9 cm it is 31 microns/pixel, like the Spirit and Opportunity Microscopic Imager (MI) cameras.

Mars Science Laboratory (MSL)↗
DOE OSTI2023

Direct observation of 3D topological spin textures and their interactions using soft x-ray vector ptychography

Magnetic topological defects are energetically stable spin configurations characterized by symmetry breaking. Vortices and skyrmions are two well-known examples of 2D spin textures that have been actively studied for both fundamental interest and practical applications. However, experimental evidence of the 3D spin textures has been largely indirect or qualitative to date, due to the difficulty of quantitively characterizing them within nanoscale volumes. Here, we develop soft x-ray vector ptychography to quantitatively image the 3D magnetization vector field in a frustrated superlattice with 10 nm spatial resolution. By applying homotopy theory to the experimental data, we quantify the topological charge of hedgehogs and anti-hedgehogs as emergent magnetic monopoles and probe their interactions inside the frustrated superlattice. We also directly observe virtual hedgehogs and anti-hedgehogs created by magnetically inert voids. We expect that this new quantitative imaging method will open the door to study 3D topological spin textures in a broad class of magnetic materials. Our work also demonstrates that magnetically frustrated superlattices could be used as a new platform to investigate hedgehog interactions and dynamics and to exploit optimized geometries for information storage and transport applications.

Rana, A↗
DOE OSTI2020

Mechanical behavior and texture evolution of WE43 magnesium-rare earth alloy in Split-Hopkinson Pressure Bar and Taylor Impact Cylinder Testing

Mechanical behavior and texture evolution of Mg rare-earth alloy WE43 is investigated for strain-rates 10 -3 /s to upwards of 10 5 /s for the two material conditions - as-cast (AC) and T6 age hardened, rolled plate (RT6). The high strain-rate behavior is tested using both Taylor cylinder impact tests (TC) and split Hopkinson pressure bar tests (SHB) and bulk textures are obtained using neutron diffraction. Unlike the quasi-static strained material, AC and RT6 SHB retained high hardening rates throughout the test, even up to 30% true strain. Moreover, the high strain-rate data revealed that the RT6 material has a much higher strength than the AC material, but similar hardening rates despite significantly different initial texture. The flow stress near yield increased up to I 0% for RT6 and up to 30% for AC as the strain-rate increased six orders of magnitude from quasi-static rates 10 -3 /s to 10 3 /s. Neither material exhibited significant plastic anisotropy over the broad range of strain rates, despite the fact that the RT6 material had a moderately strong initial texture. In the TC tests, the geometric cross-sectional changes and texture along the cylinder from the cylindrical sample foot to head are measured and from the neutron diffraction texture analysis, upper-bound estimates of twin volume fraction are obtained as well as dislocation density from analyzing diffraction peak broadening. Recorded geometrical changes along several loading directions show that the material has deformed remarkably homogeneously under impact. Analysis of deformed textures indicates that {101¯2} extension deformation twinning occurred in the RT6 condition over the range of strain rates, with an upper bound estimate of 40% twin volume fraction for approximately 0.10-0.25 true strain. The peak texture components after the impact have their c-axes closely aligned with the impact direction. As a result, these observations are presented and rationalized in the paper.

42 ENGINEERING↗
DOE OSTI2020

Visualization of texture components using MTEX

Knowledge of the appearance of texture components and fibres in pole figures, in inverse pole figures and in Euler space is fundamental for texture analysis. For cubic crystal systems, such as steels, an extensive literature exists and, for example, the book by Matthies, Vinel & Helming [Standard Distributions in Texture Analysis: Maps for the Case of Cubic Orthorhomic Symmetry, (1987), Akademie-Verlag Berlin] provides an atlas to identify texture components. For lower crystal symmetries, however, equivalent comprehensive overviews that can serve as guidance for the interpretation of experimental textures do not exist. Here, this paper closes this gap by providing a set of scripts for the MTEX package [Bachmann, Hielscher & Schaeben (2010). Solid State Phenom.160, 63–68] that allow the texture practitioner to compile such an atlas for a given material system, thus aiding orientation distribution function analysis also for non-cubic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Texture and microstructure evolution in thermomechanically processed Mg-Ca and Mg-Zn-Ca alloys

Mg-Zn-Ca alloys have the potential for producing Mg alloy sheets with weaker basal textures and therefore improved formability. Thermomechanical processing (TMP) also plays a substantial role in determining the final sheet texture. The interplay of these variables, TMP and alloying, complicates comparisons of alloys across the literature. This work systematically explores the texture evolution and recrystallization behavior in Mg-Ca and Mg-Zn-Ca alloys during plane strain compression (PSC) using a Gleeble thermomechanical simulator. It is demonstrated that the basal texture intensity and texture characteristics change significantly during post-deformation annealing, particularly in the ternary alloys. It is also shown that careful selection of the TMP processing variables used during PSC is essential to producing weak textures. In particular, it is important to limit the recrystallization that occurs between compressive hits. This is achieved by adjusting solute content, strain rate, and the duration of the soak between passes.

36 MATERIALS SCIENCE↗