Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effects of annealing temperature on the magnetic properties of highly crystalline biphase iron oxide nanorods

We report on the effects of annealing temperatures ranging from 225 °C to 325 °C on the magnetic properties of high aspect ratio iron oxide nanorods consisting of a ferrimagnetic Fe 3 O 4 phase and an antiferromagnetic α-Fe 2 O 3 phase in an as-prepared state. Annealing at the aforementioned temperatures under a constant flow of O 2 for 3 h leads to an increment of the volume fraction of the antiferromagnetic α-Fe 2 O 3 phase and concomitant enhancement of the crystallinity of the ferrimagnetic Fe 3 O 4 phase. These opposing effects compete with each other, resulting in a decrease in global magnetization with increasing the annealing temperature. The desirable magnetic properties are achieved for the sample annealed at 250 °C. For all samples investigated, we observed an increase in low field magnetization at low temperatures after the sample is field cooled in the presence of a 1T magnetic field, which we attribute to the ordering of macro-spins of the weakly ordered antiferromagnetic α-Fe 2 O 3 phase in the presence of the cooling field. Our study will pave the way for determining the optimal conditions to enhance the magnetic characteristics in iron oxide nanorods, which will enable its use in spintronics and biomedical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electron-Phonon Renormalization in the Proton-Conducting Electrolyte Ba Zr O 3 and Its Implications for High-Temperature Electrolysis

Electrical leakage is an inherent problem in solid-oxide fuel and electrolyzer cells, limiting their energy-conversion efficiency. High concentrations of electrons or holes can exacerbate this issue. However, it is largely unclear how the typical high operating temperatures of the systems influence their charge-carrier concentrations. In this work, we use first-principles calculations to examine how lattice vibrations impact electrical conductivity in conventional electrolytes, using Ba Zr O 3 as a representative material. Our analysis shows that phonon-induced shifts in the band gap and band edges lead to a dramatic increase in p -type carrier concentrations at temperatures above 600 K, compared to models that neglect temperature effects. Additionally, we reveal the importance of oxygen-ion motion on band-edge positions, which makes valence-band-edge shift dominate the band-gap change. Our study provides a protocol for calculating phonon-induced changes in similar oxides, paving the way for interrogating electrical leakage in electrolytes for high-temperature operation. Published by the American Physical Society 2025

25 ENERGY STORAGE↗
DOE OSTI2026

Selective electron-phonon coupling strength from nonequilibrium optical spectroscopy: The case of MgB 2

The coupling between quasiparticles and bosonic excitations rules the energy transfer pathways in condensed matter systems. The possibility of inferring the strength of specific coupling channels from their characteristic timescales measured in nonequilibrium experiments is still an open question. Here, in this study, we investigate MgB 2 , in which conventional superconductivity at temperatures as high as 39 K is mediated by the strong coupling between the conduction electrons and the 𝐸 2⁢𝑔 phonon mode. By means of broadband time-resolved optical spectroscopy, we show that this selective electron-phonon coupling dictates the nonequilibrium optical response of MgB 2 at early times (<100 fs) after photoexcitation. Furthermore, based on an effective temperature model analysis, we estimate its contribution to the total electron-boson coupling function extracted from complementary equilibrium spectroscopy approaches, namely, optical reflectivity and angle-resolved photoemission spectroscopy. The coupling strength with the 𝐸 2⁢𝑔 phonon modes is thus estimated to be 𝜆 ≃ 0.56, which is approximately half of the total coupling constant, in agreement with 𝑎𝑏 initio calculations from the literature. As a benchmark, broadband time-resolved optical spectroscopy is performed also on the isostructural and nonsuperconducting compound AlB 2 , showing that the nonequilibrium optical response relaxes on a slower timescale due to the lack of strongly coupled phonon modes. Our findings demonstrate the possibility to resolve and quantify selective electron-phonon coupling from nonequilibrium optical spectroscopy.

Mor, Selene [Università Cattolica del Sacro Cuore,↗
DOE OSTI2022

Thermalization of Fluorescent Protein Exciton–Polaritons at Room Temperature

Fluorescent proteins (FPs) have recently emerged as a serious contender for realizing ultralow threshold room temperature exciton–polariton condensation and lasing. Here, this contribution investigates the thermalization of FP microcavity exciton–polaritons upon optical pumping under ambient conditions. Polariton cooling is realized using a new FP molecule, called mScarlet, coupled strongly to the optical modes in a Fabry–Pérot cavity. Interestingly, at the threshold excitation energy (fluence) of ≈9 nJ per pulse (15.6 mJ cm –2 ), an effective temperature is observed, T eff ≈ 350 ± 35 K close to the lattice temperature indicative of strongly thermalized exciton–polaritons at equilibrium. This efficient thermalization results from the interplay of radiative pumping facilitated by the energetics of the lower polariton branch and the cavity Q-factor. Direct evidence for dramatic switching from an equilibrium state into a metastable state is observed for the organic cavity polariton device at room temperature via deviation from the Maxwell–Boltzmann statistics at k || = 0 above the threshold. Thermalized polariton gases in organic systems at equilibrium hold substantial promise for designing room temperature polaritonic circuits, switches, and lattices for analog simulation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Rotational Velocities of Am and Non-chemical-peculiar Stars Based on Kepler and LAMOST DR5

Rotation is a critical physical process operating in the formation of Am stars. There is a strong correlation between low-velocity rotation and chemical peculiarity. However, the existence of many non-chemical-peculiar slow rotators challenges the understanding of Am stars. The purpose of our work is to search for low-velocity rotating non-chemical-peculiar A-type stars and Am stars and to make a comparative analysis. In this paper, we pick out a sample from the LAMOST–Kepler project, including 21 Am stars, 125 non-chemical-peculiar slow rotators, and 53 non-chemical-peculiar fast rotators. We calculate the rotational frequencies through a periodic change of light curves caused by inhomogeneous stellar surfaces and then obtain the rotational velocities. For slow rotators, the age of Am stars is statistically younger than that of non-chemical-peculiar stars in the same temperature bin. In the comparison of the period, the average amplitude, and stellar mass of Am and non-chemical-peculiar stars, we discover that there is no difference in the photometric variability between Am and non-chemical-peculiar stars, which implies similar inhomogeneities on the surfaces. The average amplitude of non-chemical-peculiar stars has a downward trend with the increase of effective temperature and stellar mass, which is consistent with the theoretical prediction caused by weak dynamo-generated magnetic fields in A-type stars. In addition, we confirm four non-chemical-peculiar stars that have flares by checking field-of-view images, pixel images, and pixel-level light curves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Effect of High Temperature CO 2 on Haynes 230 Alloy (Updated Jan 2021)

The supercritical carbon dioxide (sCO 2 ) Brayton cycle is a promising candidate for future nuclear reactors due to its ability to improve power cycle energy conversion efficiency. The sCO 2 Brayton cycle can operate with an efficiency of 45-50% at operating temperatures of 550-700 C. One of the greatest hurdles currently faced by sCO 2 Brayton cycles is the corrosivity of sCO 2 and the lack of long-term alloy corrosion and mechanical performance data, as these will be key to enhancing the longevity of the system, and thus the levelized cost of electricity. Past studies have shown that sCO 2 corrosion occurs through the formation of metal carbonates, oxide layers, and carburization, and alloys with Cr, Mo and Ni generally exhibit less corrosion. While stainless steels may offer sufficient corrosion resistance at the lower range of temperatures seen by the sCO 2 Brayton cycles, more expensive nickel-based alloys are typically needed for the higher temperature regions. This study investigates the effects of corrosion on the Haynes 230 alloy, with a preliminary view on changes in the mechanical properties. High temperature CO 2 is used for this study as the corrosion products are similar to that of supercritical CO 2 , allowing for an estimation of the susceptibility towards corrosion without the need for high pressure experimentation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reducing NOx Emissions in Ammonia Combustors

Ammonia continues to attract growing interest as a carbonneutral replacement fuel, motivating numerous research efforts toward understanding fundamental ammonia combustion characteristics. A major challenge for the use of ammonia is the development of combustor technologies for mitigating potentially high NOx emissions from the fuel-bound nitrogen chemical pathways to acceptable levels. Our work focuses on a staged RQL combustor architecture for minimizing the NOx emission levels through burning fuel-rich in the primary stage to formcombustion products containing significant levels of hydrogen in addition to nitrogen and water with minimal NOx formation. The subsequent quench and burnout stages of the combustor must then quickly burn residual hydrogen with flame-temperatures moderated by nitrogen and water forming in the first stage. Chemical Reactor Network modeling was used to understand and identify optimal stoichiometry and residence times in each stage for minimizing NOx emissions and to quantify pressure and temperature effects. Reducing the overall NOx emissions requires relatively long residence times in the primary stage to achieve near equilibrium NO levels due to kinetically controlling processes. For conditions relevant to gas turbines (e.g., 30 atm), our work indicates that NOx emissions below 20 ppm are theoretically achievable in a staged RQL combustor architecture. However, these emission predictions significantly depend on the accuracies of currently available chemical kinetic mechanisms which have not been extensively validated under elevated pressure and temperature conditions relevant to gas turbines.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Optode performance data associated with: Metabolic Multireactor: practical considerations for using simple oxygen sensing optodes for high-throughput batch reactor metabolism experiments

This data package is associated with the publication “Metabolic Multireactor: practical considerations for using simple oxygen sensing optodes for high-throughput batch reactor metabolism experiments”, submitted to PlosONE (Kaufman et al. 2023; 10.1101/2023.03.28.534656).We carried out many testing and calibration experiments on a system of small oxygen consumption batch reactors designed for use with water and sediment samples for environmental questions. The oxygen sensing system is based very directly on the work of Larsen, et al. [2011], and similar oxygen sensing technology is widely used in the literature. Our primary focus was on practical considerations, such as temperature effects, lighting angle effects, sterilization, and other similar situations that a user may find useful. Most of the tests required comparing “base” calibration curves to “treatment” calibration curves to determine the extent to which the treatment impacted the reported measurements. This data package contains the performance and calibration data collected for that purpose.This dataset is comprised of one data folder containing (1) file-level metadata; (2) data dictionary; (3) readme; (4) diffusion test result files; (5) limit of detection test result files; (6) temperature impact files; (7) a main data file that contains test results for all other tests; and (8) an R script that uses Kolmogorov-Smirnov tests to determine whether treatment calibrations are significantly different from their respective base calibrations. All files are .csv, .txt, .Rmd, or .pdf.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Use of a Mylar filter to eliminate vacuum ultraviolet pulse pileup in low-energy x-ray measurements

We describe a method to reduce vacuum ultraviolet (VUV) pulse pileup (PPU) in x-ray pulse-height Silicon Drift Detector (SDD) signals. An Amptek FAST SDD, with C1 (Si 3 N 4 ) window, measures bremsstrahlung emitted from PFRC-2 plasma to extract the electron temperature (T e ) and density (n e ). The C1 window has low transmissivity for photons with energy below 200 eV though will transmit some VUV and soft x-ray photons, which PFRC-2 plasmas abundantly emit. Multi-VUV-photon PPU contaminates the interpretation of x rays with energy > 100 eV, particularly in a low-energy exponential tail. The predicted low transmissivity of ~1 μm thick Mylar [polyethylene terephthalate (PET)] to photons of energy <100 eV led to the selection of Mylar as the candidate filter to reduce VUV PPU. Experiments were conducted on an x-ray tube with a graphite target and on a quasi-Maxwellian tenuous plasma (n e ~ 10 9 cm –3 ) with effective temperatures reaching 1500 eV. A Mylar filter thickness of 850 nm is consistent with the results. The Mylar-filter-equipped SDD was then used on the PFRC-2 plasma, showing a substantial reduction in the low-energy x-ray signal, supporting our hypothesis of the importance of VUV PPU. Here, we describe the modeling and experiments performed to characterize the effect of the Mylar filter on SDD measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Melting down a tetraquark: D*D(*) interactions and T c c ( 3875 ) + in a hot environment

We discuss the modification of the properties of the tetraquark-like and its heavy quark spin partner, immersed in a hot bath of pions. We consider these exotic states as purely isoscalar DD* and D*D* S-wave bound states, respectively. Finite temperature effects are incorporated through the D and D* state-of-the-art thermal spectral functions calculated in [G. Montana et al., Phys. Rev. D, 102 (2020) 096020], using the imaginary-time formalism. We find important modifications of the DD* and D*D* scattering amplitudes already for MeV, and show that the hot-bath lineshapes of these tetraquark-like states strongly depend on their Weinberg molecular content. We find that the thermal and spectral functions change more rapidly with temperature for high molecular probabilities P0. For large values of P0, the widths significantly increase with temperature, leading to the melting of these exotic states for temperatures larger than 80 MeV. For small molecular components, the changes in the spectral functions of these states due to temperature become significantly less important. All these results show that any future experimental determination of the D(*)D* scattering amplitudes at finite temperature will provide valuable insights into the molecular content of the and exotics.

Montesinos, V. (ORCID:0000000261862777)↗
DOE OSTI2021

Split representation of adaptively compressed polarizability operator

The polarizability operator plays a central role in density functional perturbation theory and other perturbative treatment of first principle electronic structure theories. The cost of computing the polarizability operator generally scales as O(Ne4) where Ne is the number of electrons in the system. The recently developed adaptively compressed polarizability operator (ACP) formulation [L. Lin, Z. Xu and L. Ying, Multiscale Model. Simul. 2017] reduces such complexity to O(Ne 3 ) in the context of phonon calculations with a large basis set for the first time, and demonstrates its effectiveness for model problems. In this paper, we improve the performance of the ACP formulation by splitting the polarizability into a near singular component that is statically compressed, and a smooth component that is adaptively compressed. The new split representation maintains the O(Ne 3 ) complexity, and accelerates nearly all components of the ACP formulation, including Chebyshev interpolation of energy levels, iterative solution of Sternheimer equations, and convergence of the Dyson equations. For simulation of real materials, we discuss how to incorporate nonlocal pseudopotentials and finite temperature effects. In this work, we demonstrate the effectiveness of our method using one-dimensional model problem in insulating and metallic regimes, as well as its accuracy for real molecules and solids.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Computational Analysis of the Effect of Structured Packing Design on Absorption Column Hydrodynamics for Post-Combustion Carbon Capture Applications

Solvent based post-combustion carbon capture technologies have a potential for reducing carbon emissions from fossil-fuel-fired power plants and industrial sources where CO2 emissions are inherently harder to mitigate, such as steel or cement industries. A prominent technology to achieve this is by retrofitting absorption columns to the existing infrastructure. While these systems have been among the less costly alternatives for carbon capture, they still impose a considerable energy penalty to the operation of power plants or industrial facilities. The optimization of CO2 capture rate in solvent-based absorption process is complex as it depends on several factors including CO2 solubility, solvent reaction kinetics and temperature effects on the solubility, reaction rates, surface tension, and thermophysical properties of the solvent and the flue gas. The overall heat and mass transfer also depends on the hydrodynamics, which in turn, is affected by the packing geometry. In the current work, we systematically quantify the effects the design of the structured packing has on the column hydrodynamics, by performing detailed CFD simulations for different geometrical configurations and operating conditions. We then obtain relationships between the key hydrodynamic metrics, such as liquid holdup, interfacial area, wetted area, and pressure drop to the parameters defining the packing geometries and identify new more effective packing designs for the given operating conditions.

Shah, Yash Girish↗
DOE OSTI2025

Dynamics of heavy quarks in strongly coupled $\mathcal{N}$ = 4 SYM plasma

We calculate the probability distribution P(k) for a heavy quark with velocity v propagating through strongly coupled N = 4 SYM plasma in the ’t Hooft limit (N c → ∞, λ = g 2 N c → ∞) at a temperature T to acquire a momentum k due to interactions with the plasma. This distribution encodes the well-known drag coefficient η D and the transverse and longitudinal momentum diffusion coefficients κ T and κ L . The jet quenching parameter $\hat{q}$ can be extracted from P(k) for v = 1. Going beyond these known Gaussian characteristics of P(k), our calculation determines all of the higher order and mixed moments to leading order in 1/$\sqrt{λ}$ for the first time. These non-Gaussian features of P(k) include qualitatively novel correlations between longitudinal energy loss and transverse momentum broadening at nonzero v. We show that all higher moments scale characteristically with an effective temperature of the boosted plasma in the heavy quark rest frame, and we demonstrate that these non-Gaussian characteristics can be sizable in magnitude and even dominant in physically relevant situations. We use these results to derive a Kolmogorov equation for the evolution of the probability distribution for the total momentum of a heavy quark that propagates through strongly coupled plasma. This evolution equation accounts for all higher order correlations between transverse momentum broadening and longitudinal energy loss, which we have calculated from first principles. It reduces to a Fokker-Planck equation when truncated to only include the effects of η D , κ T and κ L . Remarkably, while heavy quarks do not reach kinetic equilibrium with the plasma if evolved with this Fokker-Planck equation, by showing that the Boltzmann distribution is a static solution of the all-order Kolmogorov equation that we have derived we demonstrate that heavy quarks do reach kinetic equilibrium if evolved with this equation. Our results thus provide a dynamically complete framework for understanding the thermalization of a heavy quark that may be initially far from equilibrium in the strongly coupled N = 4 SYM plasma — as well as new insight into heavy quark transport and equilibration in quark-gluon plasma.

Holography and Hydrodynamics↗
DOE OSTI2025

Phonon second harmonic generation in NaBr studied by inelastic neutron scattering and computer simulation

The phenomenon of second harmonic generation (SHG) was found for phonons in anharmonic NaBr by inelastic neutron scattering. The temperature dependence of this phonon SHG was measured from 300 K to 650 K. At 300 K the second harmonic (SH) is seen as a high-energy branch around 33 meV, nearly independent of $\overrightarrow{Q}$. The temperature effective potential (TDEP) method and classical molecular dynamics (MD) simulation with machine learning interatomic potential were able to reproduce the SH, and showed that SHG occurs with the flat transverse optical (TO) phonon branch. A classical model of a nonlinear medium explains the intensity and lifetime of the SH, compared to those of the TO modes. Also successful was a quantum model based on the Heisenberg-Langevin equation for interacting phonons coupled to a thermal bath, which also predicts a spectral distribution of the SH. In conclusion, the measured temperature dependence of the intensity of the second harmonic showed that it follows the Planck distribution of a one-phonon quasiparticle, and not two TO phonons.

36 MATERIALS SCIENCE↗
DOE OSTI2022

New Perspective on Electron Transfer through Molecules

Motivated by experiments which display unusual length and temperature effects for electron transfer in the nanometer length regime, we propose a new approach for describing long range electron transfer (ET) processes through molecules. We posit that the electron reorganization in the molecules (e.g., the electronic polarization of a macromolecule or organic film by an applied electric potential, or the injected charge generating a dipole moment) should be included in the description. We numerically solve a one-dimensional model for the electron transport, which includes electron-electron interactions explicitly; and we show that it generates a power law distance dependence for electron similar to that observed in experiments. The model does not include vibrations explicitly and should be consistent with the weak temperature dependences observed experimentally. This approach emphasizes the need to treat the electronic changes in the molecule(s) more explicitly to understand the behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Prediction of Transition-State Scaling Relationships and Universal Transition-State Vibrational and Entropic Correlations for Dehydrogenations

Linear scaling relationships (LSRs) and Brønsted–Evans–Polanyi (BEP) or transition-state scaling (TSS) relations aid with the prediction of electronic energies. However, temperature effects and pre-exponentials are often taken as constants across metal surfaces or a homologous series. Vibrational scaling relationships (VSRs) offer a way to determine such parameters. Transition-state VSRs (TSVSRs) between local minima and transition states of AH X (A = C, N, O) surface diffusions correlate with BEP relations and broaden to thermochemical property scaling. Using density functional theory, we extend TSVSRs to AHX dehydrogenation reactions on transition-metal surfaces, relating vibrational modes of local minima to transition states. We first predict the slopes of the TSS relations by incorporating bond angles using the Slater–Koster structure factors and hybridization through crystal orbital overlap population analysis and energy overlap integrals between adsorbates and metal surfaces. Additionally, we uncover universal thermochemical property scaling, enabling the estimation of entropies and temperature corrections to enthalpies across a homologous series. Here, we demonstrate both significant vibrational corrections in reactions with low intrinsic electronic barriers and considerable variation in the pre-exponential of a simple dehydrogenation reaction across metals and AH X adsorbates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Measurement Temperature on Electrical Cable Frequency Domain Reflectometry Response

In nuclear power plants, electrical cables are exposed to stressors, such as elevated temperature and radiation. Evaluation of the effect of stressors on the lifetime of electrical cables can be conducted using offline electrical reflectometry techniques, such as frequency domain reflectometry (FDR). However, recent work has raised the concern that FDR measurements at temperatures higher than ambient may diminish or reduce the response due to stressors, potentially leading to incorrect predictions of electrical cable damage and lifetime. In this work, we explore the FDR response of an electrical cable exposed to an oven-based thermal stressor up to 140°C, including both ramping up and ramping down temperature. It was observed that, for both the oven entrance and exit, an increase in the FDR measurement temperature led to a decrease in the FDR reflection coefficient. In particular, it was found that the reflection coefficient at the oven entrance decreased from the ambient measurement by approximately 7%, 22%, and 36% at a temperature of 60°C, 100°C, and 140°C, respectively.

Spencer, Mychal P.↗