Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Temperature-dependence of oxidation and carburization of Grade 91 steel in CO 2 containing impurities

Future CO 2 based power systems require steels resistant to corrosion in high-temperature CO 2 -rich environments. Candidate 9Cr ferritic-martensitic steels degrade by surface oxidation and substrate carburization, both of which can be strongly affected by impurities in the CO 2 . In this study we examined Grade 91 steel exposed to 95%CO 2 -4%H 2 O-1%O 2 with/without 0.1% SO 2 at 1 atm and 550, 600, 650° C for up to 3000 h to establish the temperature-dependence of these processes. SO 2 showed little effect on oxidation at 550-600° C but reduced carburization, while the combination of SO 2 and faster alloy diffusion at 650° C resulted in significant reduction in both oxidation and carburization.

36 MATERIALS SCIENCE↗

Measurement of the Temperature Dependence of Line Mixing and Pressure Broadening Parameters between 296 and 90 K in the v3 band of 12CH4 and their Influence on Atmospheric Methane Retrievals

We measured the temperature dependence of the nitrogen broadening, narrowing and line-mixing coefficients of four lines of the P9 manifold in the v3 band of 12CH4 for atmospheric purposes. The data were collected using our tunable diode laser (TDL) spectrometer with active wavenumber control coupled to a newly developed cold Herriott cell with a path length of 5.37 m and a temperature uniformity of better than 0.01 K along the cell. We recorded and analyzed spectra recorded at sample temperature between 90 K and room temperature. We have investigate the influence of our new results in the inversion model used to retrieve methane profiles from atmospheric spectra; our new results make it possible to retrieve significantly more precise methane profiles. The atmospheric spectra we utilized were obtained by several of us with a balloon-born Fourier Transform infrared experiment in a limb configuration. Differences up to 7% on the retrieved volume mixing ratio were found compared to an inversion model using only HITRAN04 spectroscopic parameters.

Mondelain, Didier↗

On the pressure and temperature dependence of adsorption densities and other thermodynamic properties in gas shales

Black shale source rocks have become a key natural gas resource in the US and China. Unlike in conventional hydrocarbon reservoirs, a significant fraction of the gas in shales is adsorbed onto the inordinate specific surface areas (SSA) of micropores inside organic matter with densities exceeding those of bulk gas by an order of magnitude. Yet, the distribution of adsorbed versus bulk gas remains poorly understood. Experiments measure excess adsorption isotherms, which are corrected to absolute adsorption amounts by a factor that involves the density, ρ abs , of the adsorption layer(s). Constant values of ρ abs are widely used in the literature but, we argue, are inconsistent with the pressure- and temperature-dependence of adsorption behavior. In this work, we propose a more reliable approach that assumes a constant volume of each adsorption layer that can be determined from the SSA of the substrate. We measure nine high-pressure methane excess adsorption isotherms up to 15 MPa for three shale samples from China and Germany at temperatures of 65, 75, and 95 °C, and low-pressure carbon dioxide and nitrogen isotherms to estimate the SSA. We also investigate another 24 isotherms at 35, 50, and 60° C or 8 Chinese shale samples and 3 isotherms at 60, 90, and 120° C for an Argentinian shale sample from the literature. A new variation of the multi-layer Ono-Kondo lattice model is introduced to derive the temperature and pressure dependent adsorption layer densities, which are subsequently used to obtain the absolute adsorption isotherms of interest. Finally, this practical methodology has the potential to significantly improve our estimates of shale gas-in-place resources, and adsorption modeling more broadly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-dependent magnetic properties of individual glass spherules, Apollo 11, 12, and 14 lunar samples.

Magnetic susceptibility of 11 glass spherules from the Apollo 14 lunar fines have been measured from room temperature to 4 K. Data taken at room temperature, 77 K, and 4.2 K, show that the soft saturation magnetization was temperature independent. In the temperature range 300 to 77 K the temperature-dependent component of the magnetic susceptibility obeys the Curie law. Susceptibility measurements on these same specimens and in addition 14 similar spherules from the Apollo 11 and 12 mission show a Curie-Weiss relation at temperatures less than 77 K with a Weiss temperature of 3-7 degrees in contrast to 2-3 degrees found for tektites and synthetic glasses of tektite composition. A proposed model and a theoretical expression closely predict the variation of the susceptibility of the glass spherules with temperature.

Thorpe, A. N.↗

Temperature dependence of the deactivation of O/1D/ by CO from 113-333 K

Absolute rate constants for the deactivation of O(1D) by CO have been measured at temperatures between 113 and 333 K. A very small temperature dependence is observed and is described by the Arrhenius expression (4.7 + or - 0.9) times 10 to the -11th power exp(126 + or 33)/RT cu cm/molecule-sec, where E is in cal/mol.

Davidson, J. A.↗

Temperature-dependent reflectivity of silicon carbide

The spectral reflectivity of a commercial silicon carbide (SiC) ceramic surface was measured at wavelengths from 2.5 to 14.5 microns and at temperatures ranging from 358 to 520 K using a NASA-developed multiwavelength pyrometer. The SiC surface reflectivity was low at the short wavelengths, decreasing to almost zero at 10 microns, then increasing rapidly to a maximum at approximately 12.5 microns, and decreasing gradually thereafter. The reflectivity maximum increased in magnitude with increasing surface temperature. The wavelength and temperature dependence can be explained in terms of the classical dispersion theory of crystals and the Lorentz electron theory. Electronic transitions between the donor state and the conduction band states were responsible for the dispersion. The concentration of the donor state in SiC was determined to be approximately 4 x 10 exp 18 and its ionization energy was determined to be approximately 71 meV.

Ng, Daniel↗

Ultraviolet absorption cross-sections of some carbonyl compounds and their temperature dependence

Ultraviolet absorption cross-section of phosgene (CCl2O), trichloroacetylchloride (CCl3-CClO) and trichloroacetaldehyde (CCl3-CHO) have been measured between 170 and 320 nm for temperature ranging from 210 to 295 K with classical double beam equipment. These data are compared with other available determinations performed at room temperature. Photodissociation coefficients are estimated and their temperature dependence is discussed. Impact of the photodissociation on the total atmospheric destruction of these compounds is illustrated.

Gillotay, D.↗

Temperature dependence of vacancy/self-interstitial recombination volumes in copper

We use molecular dynamics to calculate rate coefficients for recombination of vacancies with self-interstitial atoms (SIAs) in Cu at temperatures from 300 to 700 K. From these results, we calculate vacancy/SIA recombination volumes and find that they decrease from around 290 (where is one atomic volume) at 300 K to 160 at 500 K and above. By counting the number of distinct pathways by which a stable SIA may migrate to a site of spontaneous recombination with a nearby vacancy, we find a lower bound estimate of 168 for the recombination volume. We furthermore rationalize its temperature dependence based on differences between the activation energies for recombination and SIA migration. Furthermore, our work sheds light on the fundamental nature of the recombination volume and provides information that may be incorporated into multiscale models of radiation response in solids.

36 MATERIALS SCIENCE↗

The effects of incomplete annealing on the temperature dependence of sheet resistance and gage factor in aluminum and phosphorus implanted silicon on sapphire

Partial annealing of damage to the crystal lattice during ion implantation reduces the temperature coefficient of resistivity of ion-implanted silicon, while facilitating controlled doping. Reliance on this method for temperature compensation of the resistivity and strain-gage factor is discussed. Implantation conditions and annealing conditions are detailed. The gage factor and its temperature variation are not drastically affected by crystal damage for some crystal orientations. A model is proposed to account for the effects of electron damage on the temperature dependence of resistivity and on silicon piezoresistance. The results are applicable to the design of silicon-on-sapphire strain gages with high gage factors.

Pisciotta, B. P.↗

Temperature Dependence of the O + HO2 Rate Coefficient

A pulsed laser photolysis technique has been employed to investigate the kinetics of the radical-radical reaction O((sup 3)P) + HO2 OH + O2 over the temperature range 266-391 K in 80 Torr of N2 diluent gas. O((sup 3)P) was produced by 248.5-nm KrF laser photolysis of O3 followed by rapid quenching of O(1D) to O((sup 3)P) while HO2 was produced by simultaneous photolysis of H2O2 to create OH radicals which, in turn, reacted with H2O2 to yield HO2. The O((sup 3)P) temporal profile was monitored by using time-resolved resonance fluorescence spectroscopy. The HO2 concentration was calculated based on experimentally measured parameters. The following Arrhenius expression describes our experimental results: k(sub 1)(T) equals (2.91 +/- 0.70) x 10(exp -11) exp[(228 +/- 75)/T] where the errors are 2 sigma and represent precision only. The absolute uncertainty in k, at any temperature within the range 266-391 K is estimated to be +/- 22 percent. Our results are in excellent agreement with a discharge flow study of the temperature dependence of k(sub 1) in 1 Torr of He diluent reported by Keyser, and significantly reduce the uncertainty in the rate of this important stratospheric reaction at subambient temperatures.

Nicovich, J. M.↗

Evidence of Skewness and Sub-Gaussian Character in Temperature-Dependent Distributions of One Million Electronic Excitation Energies in PbS Quantum Dots

Obtaining statistical distributions by sampling a large number of conformations is vital for an accurate description of temperature-dependent properties of chemical systems. However, constructing distributions with 105??106 samples is computationally challenging because of the prohibitively high computational cost of performing rst-principles quantum-mechanical calculations. In this work, we present a new technique called the Eective Stochastic Potential Conguration Interaction Singles (ESP-CIS) method to obtain excitation energies. The ESP-CIS method uses random matrix theory for the construction of an eective stochastic representation of the Fock operator and combines it with linear-response theory. Here, we perform excitation calculations on PbS quantum dots (0.75-1.75 nm) at temperatures of 200-400 K. Results from a total of 15 million excitation energy calculations (1 million samples for each of the three dots at ve dierent temperatures) revealed the distributions to be sub-Gaussian in nature with negative skewness. The distributions progressively became red-shifted with increasing temperature. The study shows that random distortions in structure from the minimum-energy geometry of these quantum dots are more likely to lower the excitation energies.

Scher, Jeremy A.↗

Temperature dependence of magnetic anisotropy and magnetoelasticity from classical spin-lattice calculations

Here we present a classical molecular-spin dynamics (MSD) methodology that enables accurate computations of the temperature dependence of the magnetocrystalline anisotropy as well as magnetoelastic properties of magnetic materials. The nonmagnetic interactions are accounted for by a spectral neighbor analysis potential (SNAP) machine-learned interatomic potential, whereas the magnetoelastic contributions are accounted for using a combination of an extended Heisenberg Hamiltonian and a Néel pair interaction model, representing both the exchange interaction and spin-orbit-coupling effects, respectively. All magnetoelastic potential components are parameterized using a combination of first-principles and experimental data. Our framework is applied to the α phase of iron. Initial testing of our MSD model is done using a 0 K parametrization of the Néel interaction model. After this, we examine how individual Néel parameters impact the $B$ 1 and $B$ 2 magnetostrictive coefficients using a moment-independent δ sensitivity analysis. The results from this study are then used to initialize a genetic algorithm optimization which explores the Néel parameter phase space and tries to minimize the error in the B 1 and B 2 magnetostrictive coefficients in the range of 0–1200 K. Our results show that while both the 0 K and genetic algorithm optimized parametrization provide good experimental agreement for $B$ 1 and $B$ 2 , only the genetic algorithm optimized results can capture the second peak in the $B$ 1 magnetostrictive coefficient which occurs near approximately 800 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of temperature-dependent neutron transmission and self-indication measurements on tantalum at 2-keV neutron energy

The method of pseudo-resonance cross sections is used to analyze published temperature-dependent neutron transmission and self-indication measurements on tantalum in the unresolved region. In the energy region analyzed, 1825.0 to 2017.0 eV, a direct application of the pseudo-resonance approach using a customary average strength function will not provide effective cross sections which fit the measured cross section behavior. Rather a local value of the strength function is required, and a set of resonances which model the measured behavior of the effective cross sections is derived. This derived set of resonance parameters adequately represents the observed resonance hehavior in this local energy region. Similar analyses for the measurements in other unresolved energy regions are necessary to obtain local resonance parameters for improved reactor calculations. This study suggests that Doppler coefficients calculated by sampling from grand average statistical distributions over the entire unresolved resonance region can be in error, since significant local variations in the statistical distributions are not taken into consideration.

Semler, T. T.↗

Temperature dependence of the reaction NO + NO3 - 2NO2

The flash photolysis-visible absorption technique has been used to measure rate constants for the reaction NO + NO3 2NO2 over the temperature range 224-328 K. The temperature dependence of the rate constant is given by the expression K1(T) = (1.59 + or - 0.32) x 10 to the -11th exp(122/T)cu cm/molecule/s where the stated uncertainties refer to the + or - sigma limits from both random and systematic errors.

Sander, S. P.↗

Study of temperature-dependent ultrathin oxide growth on Si(111) using variable-angle spectroscopic ellipsometry

The monolayer-sensitive variable-angle spectroscopic ellipsometry technique was used to study the temperature-dependent growth mechanisms of an ultrathin oxide layer on top of silicon. The oxidation was done in atomic oxygen produced in a pure oxygen plasma and driven by an RF power source. The results have been compared with the recently proposed model of Murali and Murarka for ultrathin oxide growth on top of silicon. The activation energies of different growth parameters associated with the oxide growth have also been determined.

De, Bhola N.↗

Post-Transcriptional Mechanisms Respond Rapidly to Ecologically Relevant Thermal Fluctuations During Temperature-Dependent Sex Determination

An organism’s ability to integrate transient environmental cues experienced during development into molecular and physiological responses forms the basis for adaptive shifts in phenotypic trajectories. During temperature-dependent sex determination (TSD), thermal cues during discrete periods in development coordinate molecular changes that ultimately dictate sexual fate and contribute to patterns of inter- and intra-sexual variation. How these mechanisms interface with dynamic thermal environments in nature remain largely unknown. By deploying thermal loggers in wild nests of the American alligator (Alligator mississippiensis) over two consecutive breeding seasons, we observed that 80% of nests exhibit both male- and female-promoting thermal cues during the thermosensitive period, and of these nests, all exhibited both male- and female-promoting temperatures within the span of a single day. These observations raise a critical question—how are opposing environmental cues integrated into sexually dimorphic transcriptional programs across short temporal scales? To address this question, alligator embryos were exposed to fluctuating temperatures based on nest thermal profiles and sampled over the course of a daily thermal fluctuation. We examined the expression dynamics of upstream genes in the temperature-sensing pathway and find that post-transcriptional alternative splicing and transcript abundance of epigenetic modifier genes JARID2 and KDM6B respond rapidly to thermal fluctuations while transcriptional changes of downstream effector genes, SOX9 and DMRT1, occur on a delayed timescale. Our findings reveal how the basic mechanisms of TSD operate in an ecologically relevant context. We present a hypothetical hierarchical model based on our findings as well as previous studies, in which temperature-sensitive alternative splicing incrementally influences the epigenetic landscape to affect the transcriptional activity of key sex-determining genes.

59 BASIC BIOLOGICAL SCIENCES↗