Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Optimum quantum yield of the light emission from 2 to10 nm hydrosilylated silicon quantum dots

Here, optimizing the light-emitting efficiency of silicon quantum dots (Si QDs) has been recently intensified by the demand of the practical use of Si QDs in a variety of fields such as optoelectronics, photovoltaics, and bioimaging. It is imperative that an understanding of the optimum light-emitting efficiency of Si QDs should be obtained to guide the design of the synthesis and processing of Si QDs. Here an investigation is presented on the characteristics of the photoluminescence (PL) from hydrosilylated Si QDs in a rather broad size region (≈ 2-10 nm), which enables an effective mass approximation model to be developed, which can very well describe the dependence of the PL energy on the QD size for Si QDs in the whole quantum-confinement regime, and demonstrates that an optimum PL quantum yield (QY) appears at a specific QD size for Si QDs. The optimum PL QY results from the interplay between quantum-confinement effect and surface effect. The current work has important implications for the surface engineering of Si QDs. To optimize the light-emission efficiency of Si QDs, the surface of Si QDs must be engineered to minimize the formation of defects such as dangling bonds at the QD surface and build an energy barrier that can effectively prevent carriers in Si QDs from tunneling out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of surface roughness on the microwave emission from soils

The effect of surface roughness on the brightness temperature of a moist terrain was studied through the modification of Fresnel reflection coefficient and using the radiative transfer equation. The modification involves introduction of a single parameter to characterize the roughness. It is shown that this parameter depends on both the surface height variance and the horizontal scale of the roughness. Model calculations are in good quantitative agreement with the observed dependence of the brightness temperature on the moisture content in the surface layer. Data from truck mounted and airborne radiometers are presented for comparison. The results indicate that the roughness effects are greatest for wet soils where the difference between smooth and rough surfaces can be as great as 50K.

Choudhury, B. J.↗

Effect of surface roughness on the microwave emission from soils

The effect of surface roughness on the brightness temperature of a moist terrain has been studied through the modification of Fresnel reflection coefficient and using the radiative transfer equation. The modification involves introduction of a single parameter to characterize the roughness. It is shown that this parameter depends on both the surface height variance and the horizontal scale of the roughness. Model calculations are in good quantitative agreement with the observed dependence of the brightness temperature on the moisture content in the surface layer. Data from truck mounted and airborne radiometers are presented for comparison. The results indicate that the roughness effects are great for wet soils where the difference between smooth and rough surfaces can be as great as 50 K.

Choudhury, B. J.↗

Chemical reactivity of twin-modified copper nanowire surfaces

Effect of twin boundary (TB) spacing on atomic surface structure and chemical reactivity of nanotwinned Cu nanowires (NWs) is investigated. Post-etching surface structure and wire diameter of Cu NWs were examined by transmission electron microscopy. When TB spacing is less than 10 nm, the Cu NWs remain almost intact after chemical attack and show faceted surface structures with low atomic step density. A mechanism based on surface tension torque acting on TB/surface triple junctions is proposed to explain the faceted structure formation and enhanced corrosion resistance of nanotwinned Cu NWs.

36 MATERIALS SCIENCE↗

Stabilization of metastable phases in hafnia owing to surface energy effects

The recent empirical observation of ferroelectricity in hafnia is rather surprising since all of its known ground-state phases are nonpolar. In this letter, we show that finite size effects, relevant under experimental conditions, may themselves lead to this unexpected phenomenon due to stabilization of metastable polar phase(s). Using surface energies computed from first principles, we determine the thermodynamic stability of a parallelepiped shaped particle constructed from various low energy nonpolar and polar phases of hafnia. We find that at small dimensions, surface effects may stabilize either one of the polar phases or the nonpolar tetragonal phase (the parent phase of the polar phases), suggesting a possible explanation of the ferroelectric behavior observed in pure hafnia films. These results also explain the stabilization of the metastable tetragonal phase in nanoparticles of zirconia, the twin oxide of hafnia. While a comprehensive understanding of the origins of ferroelectricity in hafnia will require inclusion of other relevant factors (such as strain and dopants), this work highlights the importance of finite size effects as a possible key factor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗

Effect of surface tension on the onset of convection in a double-diffusive layer

The effect of surface tension on the stability of a double-diffusive layer is considered using linear stability analysis. The surface tension is assumed to vary linearly with temperature and solute concentration. The eigenvalue problem is solved by the Galerkin method. Results show that the predicted stability boundary based on Marangoni effects alone is completely altered in the presence of buoyancy effects induced by low gravity levels (about 10 exp -5 g). At reduced gravity levels, salt-finger instability may onset in the overstable mode due to the stabilizing effect of surface tension. Fluid properties in terms of the Prandtl and the Lewis numbers have a profound effect on the stability conditions; opposite stability characteristics are found in salt solutions and in molten metals.

Chen, C. F.↗

Surface Charge Effects on Fe(II) Sorption and Oxidation at (110) Goethite Surfaces

Iron(III) oxides and oxyhydroxides are among the most reactive minerals in the environment, with surfaces that become charged when immersed in water. The governing role of surface charge over interfacial processes such as metal sorption is well understood. However, its role in interfacial redox reactions, such as when metal sorption is coupled to interfacial electron transfer (ET), is not. This is mainly because surface charge affects not only the types and densities of surface complexes formed but also their respective driving forces for ET. An important case is Fe(II)-catalyzed recrystallization of Fe(III)-oxyhydroxides, in which Fe(II) sorption and interfacial ET are closely linked. We used replica-exchange constant-pH molecular dynamics simulations (Zarzycki, P.; Smith, D. M.; Rosso, K. M. J. Chem. Theory Comput. 2015, 11, 1715–1724) to calculate the distance-dependent electrostatic potential at charged (110) surfaces of goethite particles, assessing its effect on previously computed Fe(II) sorption and interfacial ET free energies (Zarzycki, P.; Kerisit, S.; Rosso, K. M. J. Phys. Chem. C 2015, 119, 3111–3123). We show that Fe(II) adsorbs preferentially as an inner-sphere complex on the negatively charged surface, and as an outer-sphere complex on the positively charged surface because of both electrostatic repulsion and high energy barriers that arise from ordered water layers at the interface. The separation distance between adsorbed Fe(II) and the surface largely dictates adiabatic versus nonadiabatic ET regimes for this interface. The findings help unravel the pH dependence of Fe(II)-catalyzed recrystallization of goethite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of surface waviness on a supercritical laminar-flow-control airfoil

Calculations were made of the effects of surface waviness on the external pressure of a supercritical airfoil at design conditions. Wave parameters varied include amplitude, wavelength, phase, and number of cycles. Effects of single and multiple waves are calculated at various chordwise locations. General trends of surface waviness effects on pressure distribution are determined and these solutions are reported. Contour deviations are imposed on the upper surface of the airfoil. Results are presented in a manner designed to facilitate ready comparison with the ideal contour static pressure distribution.

Maddalon, D. V.↗

Effects of surface temperature and clouds on the CO2 forcing

The effects of surface temperature and clouds on the CO2 forcing are studied, based on use of the Colorado State University GCM. Results are reported from a pair of perpetual July simulations in which the sea surface temperatures differ by 4 K. The precipitable water is about 1.5 times larger in the warm run. The increased water vapor concentration amplifies the radiative effects of CO2, leading to greater CO2 forcing in the warm run. In the colder run the globally averaged reduction in upward longwave radiation due to a doubling of CO2 is 4.3 W/sq m at the level of maximum forcing, or the 'CO2 tropopause'. Above and below this level the CO2 forcing decreases, resulting in a net tropospheric warming of 0.033 K/day and a net stratospheric cooling. In the warm run the CO2 forcing at the CO2 tropopause is 4.6 W/sq m, and is associated with a tropospheric warming of 0.04 K/day. The clear-sky CO2 forcing at the CO2 tropopause is 5.0 W/sq m in the cold run, and 5.2 W/sq m in the warm run. By blocking infrared radiation that would otherwise be blocked by CO2, the clouds reduce the CO2 forcing of the surface-troposphere system by 0.66 W/sq m in the cold run, and by 0.59 W/sq m in the warm run.

Schmitt, Christina↗

Probing the initial stages of iron surface corrosion: Effect of O 2 and H 2 O on surface carbonation

Iron plays a vital role in natural processes such as water, mineral, iron, and nutrient cycles. Iron undergoes reduction-oxidation and catalytic reactions to produce various corrosion films depending on its chemical environment. Near ambient pressure X-ray photoelectron spectroscopy, polarized modulated infrared reflection absorption spectroscopy, and Auger electron spectroscopy were used to study the key reactants, from O 2 (g), H 2 O vapor, Na + and Cl – on the initial stages of iron surface corrosion. Here, with increasing the ratio of O 2 and H 2 O, surface hydrocarbons were shown to oxidize into carbonates, while the Cl – was found to migrate into the interface. The effect of each individual reactant was measured separately and water was shown to have a first order rate dependence on the carbonate growth at low pressures, with little dependence for O 2 . Near ambient pressures, both H 2 O and O 2 were found to increase the carbonate growth, which was estimated using the Langmuir isotherm model, yielding Gibbs energies between –9.8 to –8.5 kJ/mol. A mechanism is suggested to explain the oxidation is catalyzed by NaCl on iron surfaces and the adventitious hydrocarbons served as the source for surface carbonation. These findings have implications for understanding other surface catalytic and redox interface chemistry in complex environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical study to predict the effect of surface roughness on the thermal and hydraulic performance of additively manufactured heat exchangers

Heat exchangers are used in many industries to transfer thermal energy between two or more objects with an associated thermal and hydraulic performance indicated by thermal effectiveness and pressure drop respectively. Many investigations have aimed to enhance the thermal effectiveness of heat exchangers by introducing turbulent flow inducers that increase the heat transfer rate at the expense of increasing pressure drop. Flow inducers like surface roughness can be controlled with advanced manufacturing methods like additive manufacturing for heat exchanger production. Selecting and manufacturing an optimal surface roughness for heat exchangers requires a more comprehensive approach that accounts for the surface roughness effect on the thermal and hydraulic performance of a sample. Since fabricating samples with additive manufacturing to a desired surface roughness can be an extensive experimental process, this study will fundamentally investigate the effect of surface roughness on the thermal and velocity boundary layers for various surface roughness profiles with physics-based computational modeling. To accurately model the surface roughness effect on thermohydraulic performance, correlations like roughness ratio, friction factor, and Nusselt number are investigated. This study expects to indicate correlations for different flow regimes which can successfully predict the effect of surface roughness on thermohydraulic performance. Results generated from modeling surface roughness effect with unique correlations are then compared to experimental data obtained from literature for validation. The results of this study will provide insight to understand the thermal fluid physics associated with surface roughness and design guidelines for heat exchangers produced with additive manufacturing.

36 MATERIALS SCIENCE↗

Electronic Structure of LiCoO 2 Surfaces and Effect of Al Substitution

The surface properties of LiCoO 2 nanoplatelets, and their chemical modifications with Al 3+ , were studied using combined experimental and theoretical approaches. Our model shows that the electronic structures of several LiCoO 2 surface facets are significantly different from those of bulk LiCoO 2 , due to altered spin states of surface Co 3+ atoms. O K -edge X-ray absorption revealed a prominent splitting of the Co 3d -O 2p states, which is attributed to the presence of intermediate-state and/or high-spin-state Co 3+ . at the surface. In particular, the nonpolar (104) surface with intermediate-spin-state Co 3+ exhibits a strong two-dimensional character of splitting in these states, whereas the polar (001) surface with low-spin-state Co 3+ has a similar electronic structure to bulk LiCoO 2 . Here, partial substitution of Co 3+ by Al 3+ through the formation of core-shell architectures increases the ratio of low-spin-state Co3+, resulting in a distinct change in the intensity ratio of the split Co 3d -O 2p states, as revealed by spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control Surface Interaction Effects of the Active Aeroelastic Wing Wind Tunnel Model

This paper presents results from testing the Active Aeroelastic Wing wind tunnel model in NASA Langley s Transonic Dynamics Tunnel. The wind tunnel test provided an opportunity to study aeroelastic system behavior under combined control surface deflections, testing for control surface interaction effects. Control surface interactions were observed in both static control surface actuation testing and dynamic control surface oscillation testing. The primary method of evaluating interactions was examination of the goodness of the linear superposition assumptions. Responses produced by independently actuating single control surfaces were combined and compared with those produced by simultaneously actuating and oscillating multiple control surfaces. Adjustments to the data were required to isolate the control surface influences. Using dynamic data, the task increases, as both the amplitude and phase have to be considered in the data corrections. The goodness of static linear superposition was examined and analysis of variance was used to evaluate significant factors influencing that goodness. The dynamic data showed interaction effects in both the aerodynamic measurements and the structural measurements.

Heeg, Jennifer↗