Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “statistically designed experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Nonanalyticities of thermodynamic functions in finite noninteracting Bose gases within an exact microcanonical ensemble

Within an exact microcanonical (MC) ensemble, we study the nonanalyticities of thermodynamic functions research in finite noninteracting Bose gases in traps. The results show that there exists a rich oscillatory behavior of MC thermodynamical quantities as a function of a system's total energy E (e.g., nonmonotonous temperature, nonanalytic and negative specific heats, and microscopic phase transitions). The origin of these nonanalyticities comes directly from the inverted curvature entropy S(E) with respect to E and the behaviors are different in different trap geometries, boundary conditions, and energy spectrum configurations. Contrary to the usual grandcanonical and canonical results, there exists Bose condensation and the nonanalyticities in the two-dimensional finite noninteracting Bose systems with different traps. We also discuss the critical temperature dependence on the particle number N with different ensembles, traps, and boundary conditions. In large enough N, almost all the results of the thermodynamical quantities become smooth, which are similar to the usual canonical behaviors. We emphasize the finite-size effects on the MC entropy change, which should, in principle, be observable in suitably designed experiments of the small systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fish Passage Assessment of an Advanced Hydropower Turbine and Conventional Turbine Using Blade-strike Modeling

In the Columbia and Snake River basins, several species of Pacific salmon were listed under the Endangered Species Act of 1973 due to significant declines of fish population. Dam operators and design engineers are thus faced with the task of making those hydroelectric facilities more ecologically friendly through changes in hydro-turbine design and operation. Public Utility District No. 2 of Grant County, Washington, applied for re-licensing from the U.S. Federal Energy Regulatory Commission to replace the 10 turbines at Wanapum Dam with advanced hydropower turbines that were designed to increase power generation and improve fish passage conditions. We applied both deterministic and stochastic blade-strike models to the newly installed turbine and an existing turbine. Modeled probabilities were compared to the results of a large-scale live fish survival study and a sensor fish study under the same operational parameters. Overall, injury rates predicted by the deterministic model were higher than experimental rates of injury while those predicted by the stochastic model were in close agreement with experiment results. Fish orientation at the time of entry into the plane of the leading edges of the turbine runner blades was an important factor contributing to uncertainty in modeled results. The advanced design turbine had slightly higher modeled injury rates than the existing turbine design; however, there was no statistical evidence that suggested significant differences in blade-strike injuries between the two turbines and the hypothesis that direct fish survival rate through the advanced hydropower turbine is equal or better than that through the conventional turbine could not be rejected.

13 HYDRO ENERGY↗

New Science, New Media: An Assessment of the Online Education and Public Outreach Initiatives of The Dark Energy Survey

As large-scale international collaborations become the standard for astronomy research, a wealth of opportunities have emerged to create innovative education and public outreach (EPO) programming. In the past two decades, large collaborations have focused EPO strategies around published data products. Newer collaborations have begun to explore other avenues of public engagement before and after data are made available. We present a case study of the online EPO program of The Dark Energy Survey, currently one of the largest international astronomy collaborations actively taking data. DES EPO is unique at this scale in astronomy, as far as we are aware, as it evolved organically from scientists' passion for EPO and is entirely organized and implemented by the volunteer efforts of collaboration scientists. We summarize the strategy and implementation of eight EPO initiatives. For content distributed via social media, we present reach and user statistics over the 2016 calendar year. DES EPO online products reached ~2,500 users per post, and 94% of these users indicate a predisposition to science-related interests. We find no obvious correlation between post type and post reach, with the most popular posts featuring the intersections of science and art and/or popular culture. We conclude that one key issue of the online DES EPO program was designing material which would inspire new interest in science. The greatest difficulty of the online DES EPO program was sustaining scientist participation and collaboration support; the most successful programs are those which capitalized on the hobbies of participating scientists. We present statistics and recommendations, along with observations from individual experience, as a potentially instructive resource for scientists or EPO professionals interested in organizing EPO programs and partnerships for large science collaborations or organizations.

Wolf, R. C.↗

Sensitivity and uncertainty analysis applied to the JHR reactivity prediction

The on-going AMMON program in EOLE reactor at CEA Cadarache (France) provides experimental results to qualify the HORUS-3D/N neutronics calculation scheme used for the design and safety studies of the new Material Testing Jules Horowitz Reactor (JHR). This paper presents the determination of technological and nuclear data uncertainties on the core reactivity and the propagation of the latter from the AMMON experiment to JHR. The technological uncertainty propagation was performed with a direct perturbation methodology using the 3D French stochastic code TRIPOLI4 and a statistical methodology using the 2D French deterministic code APOLLO2-MOC which leads to a value of 289 pcm (1{sigma}). The Nuclear Data uncertainty propagation relies on a sensitivity study on the main isotopes and the use of a retroactive marginalization method applied to the JEFF 3.1.1 {sup 27}Al evaluation in order to obtain a realistic multi-group covariance matrix associated with the considered evaluation. This nuclear data uncertainty propagation leads to a K{sub eff} uncertainty of 624 pcm for the JHR core and 684 pcm for the AMMON reference configuration core. Finally, transposition and reduction of the prior uncertainty were made using the Representativity method which demonstrates the similarity of the AMMON experiment with JHR (the representativity factor is 0.95). The final impact of JEFF 3.1.1 nuclear data on the Begin Of Life (BOL) JHR reactivity calculated by the HORUS-3D/N V4.0 is a bias of +216 pcm with an associated posterior uncertainty of 304 pcm (1{sigma}). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quality Control Analysis in Real-time (QC-ART): A Tool for Real-time Quality Control Assessment of Mass Spectrometry-based Proteomics Data

Liquid chromatography-mass spectrometry (LC-MS)-based proteomics studies of large sample cohorts can easily require from months to years to complete. Acquiring consistent, high-quality data in such large-scale studies is challenging because of normal variations in instrumentation performance over time, as well as artifacts introduced by the samples themselves, such as those due to collection, storage and processing. Existing quality control methods for proteomics data primarily focus on post-hoc analysis to remove low-quality data that would degrade downstream statistics; they are not designed to evaluate the data in near real-time, which would allow for interventions as soon as deviations in data quality are detected. In addition to flagging analyses that demonstrate outlier behavior, evaluating how the data structure changes over time can aide in understanding typical instrument performance or identify issues such as a degradation in data quality due to the need for instrument cleaning and/or re-calibration. To address this gap for proteomics, we developed Quality Control Analysis in Real-Time (QC-ART), a tool for evaluating data as they are acquired in order to dynamically flag potential issues with instrument performance or sample quality. QC-ART has similar accuracy as standard post-hoc analysis methods with the additional benefit of real-time analysis. We demonstrate the utility and performance of QC-ART in identifying deviations in data quality due to both instrument and sample issues in near real-time for LC-MS-based plasma proteomics analyses of a sample subset of The Environmental Determinants of Diabetes in the Young cohort. We also present a case where QC-ART facilitated the identification of oxidative modifications, which are often underappreciated in proteomic experiments.

Stanfill, Bryan A.↗

Electromagnetic calorimeters based on scintillating lead tungstate crystals for experiments at Jefferson Lab

A new electromagnetic calorimeter consisting of 140 lead tungstate (PbWO 4 ) scintillating crystals was constructed for the PrimEx- η experiment at Jefferson lab. The calorimeter was integrated into the data acquisition and trigger systems of the GlueX detector and used in the experiment to reconstruct Compton scattering events. The experiment started collecting data in the spring of 2019 and acquired about 30% of the required statistics. The calorimeter is a prototype for two PbWO 4 -based detectors: the Neutral Particle Spectrometer (NPS) and the lead tungstate insert of the Forward CALorimeter (FCAL) of the GlueX detector. The article presents the design and performance of the Compton calorimeter and gives a brief overview of the FCAL and NPS projects.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Search for e → τ charged lepton flavor violation at the EIC with the ECCE detector

The recently approved Electron-Ion Collider (EIC) will provide a unique new opportunity for searches of charged lepton flavor violation (CLFV) and other new physics scenarios. In contrast to the e ↔ μ CLFV transition for which very stringent limits exist, there is still a relatively large discovery space for the e → τ CLFV transition, potentially to be explored by the EIC. Here, with the latest detector design of ECCE (EIC Comprehensive Chromodynamics Experiment) and projected integral luminosity of the EIC, we find the τ-leptons created in the DIS process ep → τX are expected to be identified with high efficiency. A first ECCE simulation study, restricted to the 3-prong τ-decay mode and with limited statistics for the Standard Model backgrounds, estimates that the EIC will be able to improve the current exclusion limit on e → τ CLFV by an order of magnitude. As a result, the very high vertex resolution of the ECCE detector configuration plays a critical role in τ identification.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Omics-Lethal Human Viruses, West Nile Experiment WCB001

The purpose of this experiment was to evaluate the host response to wild-type West Nile virus (WNV-NY99 382) and mutant WNV-E218A virus infection. Sample data was obtained from mouse cerebellum tissue and processed for mRNA, miRNA, proteomics, metabolomics, and lipidomics expression analysis. Tissues from this experiment were matched to tissues from GSE77193 (WCT001), using 1/4 of the cortex and 1/2 of cerebellum from the same mice. Secondary host-associated viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics, metabolomics, lipidomics, and transcriptomics dataset downloads each have a direct relationship to a primary sample submission corresponding to a specific West Nile virus infection.

59 BASIC BIOLOGICAL SCIENCES↗

Omics-Lethal Human Viruses, West Nile Experiment WCT001

The purpose of this experiment was to evaluate the host response to wild-type West Nile virus (WNV-NY99 382) and mutant WNV-E218A (WNV-NY99 382 E218A 2 nt) virus infection. Sample data was obtained from mouse cortex tissue for mRNA, miRNA, proteomics, lipidomics, and metabolomics expression analysis. Tissues from this experiment were matched to tissues from GSE77192 (WCB001), using 1/4 of the cortex and 1/2 of cerebellum from the same mice. Secondary host-associated viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics, metabolomics, lipidomics, and transcriptomics dataset downloads each have a direct relationship to a primary sample submission corresponding to a specific West Nile virus infection.

59 BASIC BIOLOGICAL SCIENCES↗

Implementation of Feldman-Cousins Corrections and Oscillation Calculations in the HPC Environment for the NOvA Experiment

Analysis of neutrino oscillation data involves a combination of complex fitting procedures and statistical correction techniques that are used to determine the full three-flavor PMNS parameters and constraint contours. These techniques rely on computationally intensive “multi-universe” stochastic modeling. The process of calculating these contours and corrections can dominate final stages of the data analysis and become a bottleneck for examining the ef-fect of systematic variations on the final results. As part of the DOE SciDAC-4 sponsored research program, we present a new implementation of a neutrino oscillation fitting and framework to carry out calculations of Feldman-Cousins corrections. This implementation is specifically designed and optimized to operate on modern High-Performance Computing (HPC) facilities. We present the performance of the system in calculating allowed regions for the NOvA experiment based on 8.9 x 1020 and 6.9 x 1020 protons-on-target (POT) neutrino and antineutrino datasets, and compare the performance of this new implementation run at the NERSC supercomputing facility with that from methods used previously by the NOvA collaboration running on grid computing facilities.

Sousa, Alexandre↗

Distinguishing Research Reactor Fuels Using Neutron Multiplicity - 25615

Neutron measurements are one of the reliable means of interrogation of fissile material. Neutron measurements are used for total counting (pure metal fissile samples) or counting coincidence/multiplicity (for impure fissile samples). Various flavors of neutron measurement are used routinely by the IAEA to determine the fissile mass of an unknown sample. The objective of this work is to design an experiment to distinguish the two different fuel types using neutron multiplicity method. The design of experiment is performed using Monte Carlo N- Particle (MCNP) transport code. General Electric (GE) designed 1-MWt pool-type research reactor at UMass Lowell (UMLRR) uses Materials Testing Reactor (MTR) plate-type fuel consisting of 19 full and 2 partial fuel assemblies, controlled by four boron control blades and one regulating control rod. Two different fuel types are available at the UMLRR facility. In 2008, UMass Lowell obtained slightly burnt fuel assemblies from the decommissioned WPI research reactor. The simulation results discussed in this paper show that within the limits of statistical error, the single and double moments for the WPI and UMLRR fuels can be measured. The two fuels have very similar composition and enrichments resulting in very similar neutron multiplicity moments. This implies that neutron multiplicity measurements alone would not be sufficient to distinguish between the two fuel types at low burnups. The change in the observed single-double ratio between each fuel type is less than 6 % which falls below the uncertainty in the efficiency of the JCC71 slab detectors. The neutron signature from low burnup and low enriched uranium fuel are not strong, however, these can be measured under low background and long measurement times. This would be an important consideration in designing the experiments and parallel gamma measurements will also be planned. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rolling Root Mean Square Based Multimodal Anomaly Detection for Real Time Monitoring of Smart Grid

Reliable real-time monitoring is valuable for maintaining the operational integrity of modern electrical smart grids. Deployment of heterogeneous sensing technologies in substations has enabled high-resolution, multichannel waveform monitoring, but also introduces challenges for anomaly detection due to noise, baseline drift, and modality-dependent signal characteristics. In this work, we present a computationally efficient unsupervised method for multimodal event detection based on Rolling Root Mean Square based Event Detection (RRMSED). The method is developed using in-house, field deployed sensors collecting data at a utility substation. The sensing system comprises voltage and current sensors, triaxial accelerometers, and magnetometers, collectively capturing electrical, vibrational, and magnetic waveform measurements at high temporal resolution. RRMSED operates by extracting rolling RMS energy features and their first-order temporal differences from consecutive waveform segments for each channel and then applying channel-specific statistical thresholds learned from historical data. A persistence-based exceedance logic is employed to robustly identify transient events while suppressing impulsive noise, and to provide precise temporal localization with high resolution. The framework is designed for continuous server-side operation and can be deployed in real time without requiring complex models. Experiments on simulated waveform data with known ground truth demonstrate low false positive (FP) and false negative (FN) rates. Application to real substation data shows RRMSED to identify events that are not captured by conventional monitoring indicators including fast transient detection algorithm currently deployed in the system. These results indicate that rolling RMS based features provide an effective and practical basis for real-time multimodal event detection in smart-grid substations.

Mukherjee, Subrata [ORNL] (ORCID:0000000309930338)↗

Search for muon neutrino disappearance with multi-topologically splitted Inclusive events at SBN

The Short-Baseline Neutrino (SBN) program at Fermilab searches for signatures of sterile neutrinos with mass-squared splittings at the O(1) eV2 scale, motivated by anomalies previously reported by the LSND and MiniBooNE experiments. We present a search for such signatures using the muon neutrino disappearance channel. This analysis exploits the large statistics of fully inclusive charged-current interactions collected by the SBND and ICARUS detectors to maximize sensitivity. The inclusive samples in both detectors are further subdivided into multiple exclusive topological channels, a strategy designed to enhance sensitivity by isolating differences in interaction-mode composition and reconstructed energy response. This multi-topology approach represents a novel analysis technique within SBN, enabling improved constraints on systematic uncertainties arising from neutrino flux, interaction modeling, and detector response. We will present comparisons of data with detailed predictions incorporating a comprehensive treatment of systematic uncertainties and constraints on the systematics obtained by the multi-topology method.

Yadav, Shweta [Texas U., Arlington]↗

The GGCMI Phase 2 emulators: global gridded crop model responses to changes in CO 2 , temperature, water, and nitrogen (version 1.0)

Statistical emulation allows combining advantageous features of statistical and process-based crop models for understanding the effects of future climate changes on crop yields. We describe here the development of emulators for nine process-based crop models and five crops using output from the Global Gridded Model Intercomparison Project (GGCMI) Phase 2. The GGCMI Phase 2 experiment is designed with the explicit goal of producing a structured training dataset for emulator development that samples across four dimensions relevant to crop yields: atmospheric carbon dioxide (CO2) concentrations, temperature, water supply, and nitrogen inputs (CTWN). Simulations are run under two different adaptation assumptions: that growing seasons shorten in warmer climates, and that cultivar choice allows growing seasons to remain fixed. The dataset allows emulating the climatological-mean yield response of all models with a simple polynomial in mean growing-season values. Climatological-mean yields are a central metric in climate change impact analysis; we show here that they can be captured without relying on interannual variations. In general, emulation errors are negligible relative to differences across crop models or even across climate model scenarios; errors become significant only in some marginal lands where crops are not currently grown. We demonstrate that the resulting GGCMI emulators can reproduce yields under realistic future climate simulations, even though the GGCMI Phase 2 dataset is constructed with uniform CTWN offsets, suggesting that the effects of changes in temperature and precipitation distributions are small relative to those of changing means. The resulting emulators therefore capture relevant crop model responses in a lightweight, computationally tractable form, providing a tool that can facilitate model comparison, diagnosis of interacting factors affecting yields, and integrated assessment of climate impacts.

54 ENVIRONMENTAL SCIENCES↗

Neutron Assay System for Confinement Vessel Disposition

Waste will be removed from confinement vessels remaining from 1970s-era experiments. Los Alamos has 9+ spherical confinement vessels remaining from experiments. Each vessel contains {approx} 500 lbs of radioactive debris such as actinide metals and oxides, metals, powdered silica, graphite, and wires and hardware. In order to dispose of the vessels, debris and contamination must be removed. Neutron assay system was designed to assay vessels before and after cleanout. System requirements are: (1) Modular and moveable; (2) Capable of detecting {approx}100g {sup 239}Pu equivalent in a 2-inch thick steel sphere with 6 foot diameter; and (3) Capable of safeguards-quality assays. Initial design parameters arethe use of 4-atm {sup 3}He tubes with length of 6 feet, and {sup 3}He tubes embedded in polyethelene for moderation. This paper describes the calibration of the Confinement Vessel Assay System (CVAS) and quantification of its uncertainties. Assay uncertainty depends on five factors: (1) Statistical uncertainty in the assay measurement; (2) Statistical uncertainty in the background measurement; (3) Statistical uncertainty in the isotopics determination - This should be much smaller than the other uncertainties; (4) Systematic uncertainty due to position bias; and (5) Systematic uncertainty due to fluctuations in cosmic ray spallation. This one can be virtually eliminated by performing the background measurement with an empty vessel - but that may not be possible. We used modeling and experiments to quantify the systematic uncertainties. The calibration assumes a uniform distribution of material, but reality will be different. MCNPX modeling was used to quantify the positional bias. The model was benchmarked to build confidence in its results. Material at top of vessel is 44% greater than amount assayed, according to singles. Material near 19-tube detector is 38% less than amount assayed, according to singles. Cosmic ray spallation contributes significantly to the background. Comparing rates with and without a vessel showed that spallation adds an average of 27.27 singles/s and 5.45 doubles/s to background. Errors in the background rates were estimated at 20%.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Decoding {beta}-decay systematics: A global statistical model for {beta}{sup -} half-lives

Statistical modeling of nuclear data provides a novel approach to nuclear systematics complementary to established theoretical and phenomenological approaches based on quantum theory. Continuing previous studies in which global statistical modeling is pursued within the general framework of machine learning theory, we implement advances in training algorithms designed to improve generalization, in application to the problem of reproducing and predicting the half-lives of nuclear ground states that decay 100% by the {beta}{sup -} mode. More specifically, fully connected, multilayer feed-forward artificial neural network models are developed using the Levenberg-Marquardt optimization algorithm together with Bayesian regularization and cross-validation. The predictive performance of models emerging from extensive computer experiments is compared with that of traditional microscopic and phenomenological models as well as with the performance of other learning systems, including earlier neural network models as well as the support vector machines recently applied to the same problem. In discussing the results, emphasis is placed on predictions for nuclei that are far from the stability line, and especially those involved in r-process nucleosynthesis. It is found that the new statistical models can match or even surpass the predictive performance of conventional models for {beta}-decay systematics and accordingly should provide a valuable additional tool for exploring the expanding nuclear landscape.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanoindentation of Micrograins in Polycrystals under Multiaxial Stress: Control of Abrupt & Stochastic Plastic Events

Deforming objects in the world of the small has proven a much more complex task than just bending a common-sized object like a spoon. Over the last decade, it has become clear that the application of stress on micron-sized objects, such as micropillars, leads to abrupt and stochastic plastic strain jumps that do not satisfy Weibull statistics (as expected for uncorrelated defect yielding) but instead seem to follow highly wide, power-law distributions, pointing towards cooperative dislocation plasticity. Are power-law distributed plastic events the rule or the exception in crystals? If the rule, can we design protocols to control and suppress them in order to achieve deterministic and smooth microforming processes? We propose to combine experiments and theory to unravel the mysteries of abrupt microplastic deformation in a natural dislocation environment: micron-sized grains (\micrograins") of polycrystals. We propose a novel experimental design that utilizes nanoindentation and 4-point bending techniques on the substrate of polycrystalline thin films of two typical FCC metals (Al and Cu), and make concrete theoretical conjectures, based on intuition built from previous theoretical and experimental efforts in micropillar compression and nanoindentation. Based on a wide set of observations over the last decade, we put forward two distinct hypotheses that we propose to investigate in both theory and experiments: Our first conjecture is that crystal plasticity in the central region of micron-sized grains has micropillar-like stochastic features: power-law plastic strain jumps at stresses above the macroscale yield strength, displaying strong size and rate effects. We will demonstrate this similarity in spherical nanoindentation experiments in the central-region of multi-orientation grains of Al and Cu thin films. Al and Cu are selected for their disparity in stacking fault energy and consequently, their different propensity for cross-slip relaxation; however, our protocol may be applied to any crystalline material of technological interest. We will test our hypothesis by performing two-dimensional extended discrete dislocation plasticity (2.5D-DDP) simulations, inspired by comparable successful studies of micropillar plasticity, and extended to model nanoindentation with two slip systems and on a surface of a bicrystal with microhard grain-boundaries (GB), ie. not allowing dislocation absorption (116). Our model will include effective three dimensional dislocation mechanisms such as dislocation multiplication and double-cross-slip assisted glide. Second, we hypothesize that the application of uniform in-plane stress on our thin films below the yield point can smoothen the micrograin plastic response during nanoindentation. On a technological level, we propose that indentation-induced localization (sink-in) may be diminished by the application of concurrent in-plane stress that activates slow, viscoplastic relaxations near GBs. We aim to demonstrate our hypothesis through a 4-point bending apparatus that introduces a homogeneous in-plane stress state before indentation. We will perform simulations of a coarse-grained mesoscale theory of plasticity in a system with microhard GBs, benchmarked through 2.5D-DDP simulations, which will capture the effects of slow viscoplastic relaxations. Our nanoindentation abrupt event statistics studies, either in the micrograin interior or near GBs, will be correlated to direct observations of induced surface dislocation microstructures. For we will use TEM-based methods (PACOM/TKD) in combination with EBSD. Indents placed in the center of grains will be analyzed based on the orientation of the grain, while those near to GBs will be analyzed based on the orientation of each grain, the distance from the GB and the 5 degrees of freedom of the GB.

36 MATERIALS SCIENCE↗

Creep Effects on Design below the Temperature Limits of ASME Section III Subsection NB

Some recent studies of material response have identified an issue that crosses over and blurs the boundary between ASME Boiler and Pressure Vessel Code Section III Subsection NB and Subsection NH. For very long design lives, the effects of creep show up at lower and lower temperature as the design life increases. Although true for the temperature at which the allowable stress is governed by creep properties, the effect is more apparent, e.g. creep effects show up sooner, at local structural discontinuities and peak thermal stress locations. This is because creep is a function of time, temperature and stress and the higher the localized stress, the lower in temperature creep begins to cause damage. If the threshold is below the Subsection NB to NH temperature boundary, 700 F for ferritic steels and 800 F for austenitic materials, then this potential failure mode will not be considered. Unfortunately, there is no experience base with very long lives at temperatures close to but under the Subsection NB to NH boundary to draw upon. This issue is of particular interest in the application of Subsection NB rules of construction to some High Temperature Gas Reactor (HTGR) concepts. The purpose of this paper is, thus, twofold; one part is about statistical treatment and extrapolation of sparse data for a specific material of interest, A533B; the other part is about how these results could impact current design procedures in Subsection NB.

36 MATERIALS SCIENCE↗