Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sparse estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Validation of the Pulmonary Function System for Use on the International Space Station

Aerobic deconditioning occurs during long duration space flight despite the use of exercise countermeasures (Convertino, 1996). As a part of International Space Station (ISS) medical operations, periodic tests designed to estimate aerobic capacity are performed to track changes in aerobic fitness and to determine the effectiveness of exercise countermeasures. These tests are performed prior to, during, and after missions of greater than 30 days in duration. Crewmembers selected for missions aboard the ISS perform a graded exercise test on a cycle ergometer approximately 270 days prior to their scheduled launch date in order to measure peak oxygen consumption (VO2PK) and peak heart rate (HRpk). Approximately 30 to 45 days prior to launch, crewmembers perform a submaximal cycle ergometer test at work rates set to elicit 25, 50 and 75% of their pre-flight VO2PK. This test, known as the Periodic Fitness Evaluation (PFE), serves as a baseline measure to which subsequent in-and post-flight exercise tests are compared. While onboard the ISS, crewmembers are normally scheduled to perform the PFE beginning with flight day (FD) 14 and every 30 days thereafter. The PFE is also conducted 5 and 30 days following flight. Using PFE data, aerobic fitness is estimated by quantifying the VO2 vs. HR relationship using linear regression and calculating the VO2 that would occur at the crewmember s previously measured HRpk. Currently, for data collected during flight, this technique assumes that the pre- vs. in-flight oxygen consumption per given cycle workload is similar. However, the validity of this assumption is based upon a sparse amount of data collected during the Skylab era (Michel, et al. 1977). The method of using heart rate and cycle ergometer work rates has been used to estimate aerobic fitness in normal gravity (Astrand and Ryhming, 1954; Lee, 1993). Due to spaceflight induced physiological alterations, such as shifts in extracellular fluid (e.g. plasma) volume, this method may not be valid during space flight. In addition, the ergometer onboard ISS is vibration-isolated and moves with the astronaut s application of force into the pedals. The effect of this movement on the VO2 of cycle exercise on ISS has not been quantified.

McCleary, Frank A.↗
DOE OSTI2021

Optical Variability of ICRF3 Quasars in the Pan-STARRS 3Pi Survey with Functional Principal Component Analysis

We make use of individual (epoch) detection data from the Pan-STARRS “3π” survey for 2863 optical ICRF3 counterparts in the five wavelength bands g, r, i, z, and y, published as part of the Data Release 2. A dedicated method based on the Functional Principal Component Analysis is developed for these sparse and irregularly sampled data. With certain regularization and normalization constraints, it allows us to obtain uniform and compatible estimates of the variability amplitudes and average magnitudes between the passbands and objects. We find that the starting assumption of affinity of the light curves for a given object at different wavelengths is violated for several percent of the sample. The distributions of rms variability amplitudes are strongly skewed toward small values, peaking at ∼0.1 mag with tails stretching to 2 mag. Statistically, the lowest variability is found for the r band and the largest for the reddest y band. A small “brighter-redder” effect is present, with amplitudes in y greater than amplitudes in g in 57% of the sample. The variability versus redshift dependence shows a strong decline with z toward redshift 3, which we interpret as the time dilation of the dominant time frequencies. The colors of radio-loud ICRF3 quasars are correlated with redshift in a complicated, wavy pattern governed by the emergence of brightest emission lines within the five passbands.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1988

Relative dating of Hawaiian lava flows using multispectral thermal infrared images - A new tool for geologic mapping of young volcanic terranes

The weathering of Hawaiian basalts in arid and semiarid environments is accompanied by changes in their thermal infrared emittance spectra. The spectral differences can be measured and mapped with multispectral imaging systems. The differences appear to be related to the degree of development, preservation, and alteration of glassy crusts; the oxidation of iron; and the accretion of silica-rich surface veneers. Because the measurements are quantitative and in image format, they are useful for estimating relative ages in geologic mapping of lava flows. In Hawaii this technique is most diagnostic for distinguishing among sparsely vegetated flows less than 1.5 ka in age.

Kahle, Anne B.↗
NASA NTRS2019

The Global Fire Atlas of Individual Fire Size, Duration, Speed and Direction

Natural and human-ignited fires affect all major biomes, altering ecosystem structure, biogeochemical cycles and atmospheric composition. Satellite observations provide global data on spatiotemporal patterns of biomass burning and evidence for the rapid changes in global fire activity in response to land management and climate. Satellite imagery also provides detailed information on the daily or sub-daily position of fires that can be used to understand the dynamics of individual fires. The Global Fire Atlas is a new global dataset that tracks the dynamics of individual fires to determine the timing and location of ignitions, fire size and duration, and daily expansion, fire line length, speed, and direction of spread. Here, we present the underlying methodology and Global Fire Atlas results for 2003–2016 derived from daily moderate-resolution (500 m) Collection 6 MCD64A1 burned-area data. The algorithm identified 13.3 million individual fires over the study period, and estimated fire perimeters were in good agreement with independent data for the continental United States. A small number of large fires dominated sparsely populated arid and boreal ecosystems, while burned area in agricultural and other human-dominated landscapes was driven by high ignition densities that resulted in numerous smaller fires. Long-duration fires in boreal regions and natural landscapes in the humid tropics suggest that fire season length exerts a strong control on fire size and total burned area in these areas. In arid ecosystems with low fuel densities, high fire spread rates resulted in large, short-duration fires that quickly consumed available fuels. Importantly, multiday fires contributed the majority of burned area in all biomass burning regions. A first analysis of the largest, longest and fastest fires that occurred around the world revealed coherent regional patterns of extreme fires driven by large-scale climate forcing. Global Fire Atlas data are publicly available through http://www.globalfiredata.org (last access: 9 August 2018) and https://doi.org/10.3334/ORNLDAAC/1642, and individual fire information and summary data products provide new information for benchmarking fire models within ecosystem and Earth system models, understanding vegetation–fire feedbacks, improving global emissions estimates, and characterizing the changing role of fire in the Earth system.

global fire atlas↗
NASA NTRS2020

The bioclimatic extent and pattern of the cold edge of the boreal forest: the circumpolar taiga-tundra ecotone

Current configurations of forest structure at the cold edge of the boreal may help understand the future of ecosystem functioning in high northern latitudes. The circumpolar biome boundary at the boreal (taiga) forest and tundra interface is an ecological transition zone (taiga-tundra ecotone; TTE) experiencing changes that affect its forest structure. We accounted for the TTE's horizontal forest structure with an estimate of its extent and pattern as represented by tree canopy cover (TCC). We quantified TCC patterns with an algorithm that describes its spatial gradient, and summarized landscape patterns of structure to represent heterogeneity, capturing abrupt, diffuse, and uniform forest at mesoscales. We used these landscape patterns to constrain the spatial extent of sparse and open canopy forest, and non-forest (forest-adjacent) edge that defines the TTE extent. The resulting map of the TTE extent is based on forest structure spatial patterns resolved at 30 m, highlights structural variability across landscapes, and helps distinguish tundra from boreal domains. We classified 14 594 landscapes as those associated with the TTE within a circumpolar bioclimatic envelope (11.575 million km2), where 44.83% of the area of these landscapes were forest and non-forest edge, yet 36.43% contributed to the TTE extent. We report the overall extent of the TTE (3.032 million km2) across North America and Greenland (53%), and Eurasia (47%), where 0.697 million km2 is non-forest edge, 0.549 million km2 is sparse forest, and 1.787 million km2 is open canopy forest. Diffuse forest landscapes dominate the TTE (79%), and abrupt landscapes (~19%) indicate portions of the TTE where sparse forest and non-forest edge are the prevailing structural patterns. This account of the TTE quantifies the area of the cold edge of the boreal forest where previous global estimates show high discrepancies, and can help target monitoring and prediction of circumpolar dynamics.

Paul M Montesano↗
DOE OSTI2020

Efficient numerical methods to solve sparse linear equations with application to PageRank

Over the last two decades, the PageRank problem has received increased interest from the academic community as an efficient tool to estimate web-page importance in information retrieval. Despite numerous developments, the design of efficient optimization algorithms for the PageRank problem is still a challenge. Here, we propose three new algorithms with a linear time complexity for solving the problem over a bounded-degree graph. The idea behind them is to set up the PageRank as a convex minimization problem over a unit simplex, and then solve it using iterative methods with small iteration complexity. Our theoretical results are supported by an extensive empirical justification using real-world and simulated data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Processing Aleatory and Epistemic Uncertainties in Experimental Data From Sparse Replicate Tests of Stochastic Systems for Real-Space Model Validation

This paper presents a practical methodology for propagating and processing uncertainties associated with random measurement and estimation errors (that vary from test-to-test) and systematic measurement and estimation errors (uncertain but similar from test-to-test) in inputs and outputs of replicate tests to characterize response variability of stochastically varying test units. Also treated are test condition control variability from test-to-test and sampling uncertainty due to limited numbers of replicate tests. These aleatory variabilities and epistemic uncertainties result in uncertainty on computed statistics of output response quantities. The methodology was developed in the context of processing experimental data for “real-space” (RS) model validation comparisons against model-predicted statistics and uncertainty thereof. The methodology is flexible and sufficient for many types of experimental and data uncertainty, offering the most extensive data uncertainty quantification (UQ) treatment of any model validation method the authors are aware of. It handles both interval and probabilistic uncertainty descriptions and can be performed with relatively little computational cost through use of simple and effective dimension- and order-adaptive polynomial response surfaces in a Monte Carlo (MC) uncertainty propagation approach. A key feature of the progressively upgraded response surfaces is that they enable estimation of propagation error contributed by the surrogate model. Sensitivity analysis of the relative contributions of the various uncertainty sources to the total uncertainty of statistical estimates is also presented. Finally, the methodologies are demonstrated on real experimental validation data involving all the mentioned sources and types of error and uncertainty in five replicate tests of pressure vessels heated and pressurized to failure. Simple spreadsheet procedures are used for all processing operations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Derivative-based SINDy (DSINDy): Addressing the challenge of discovering governing equations from noisy data

Recent advances in the field of data-driven dynamics allow for the discovery of ODE systems using state measurements. One approach, known as Sparse Identification of Nonlinear Dynamics (SINDy), assumes the dynamics are sparse within a predetermined basis in the states and finds the expansion coefficients through linear regression with sparsity constraints. This approach requires an accurate estimation of the state time derivatives, which is not necessarily possible in the high-noise regime without additional constraints. We present an approach called Derivative-based SINDy (DSINDy) that combines two novel methods to improve ODE recovery at high-noise levels. First, we denoise the state variables by applying a projection operator that leverages the assumed basis for the system dynamics. Second, we use a second order cone program (SOCP) to find the derivative and governing equations simultaneously. We derive theoretical results for the projection-based denoising step, which allow us to estimate the values of hyperparameters used in the SOCP formulation. This underlying theory helps limit the number of required user-specified parameters. Finally, we present results demonstrating that our approach leads to improved system recovery for the Van der Pol oscillator, the Duffing oscillator, the Rössler attractor, and the Lorenz 96 model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Closure of Earth’s Global Seasonal Cycle of Energy Storage

Abstract The global seasonal cycle of energy in Earth’s climate system is quantified using observations and reanalyses. After removing long-term trends, net energy entering and exiting the climate system at the top of the atmosphere (TOA) should agree with the sum of energy entering and exiting the ocean, atmosphere, land, and ice over the course of an average year. Achieving such a balanced budget with observations has been challenging. Disagreements have been attributed previously to sparse observations in the high-latitude oceans. However, limiting the local vertical integration of new global ocean heat content estimates to the depth to which seasonal heat energy is stored, rather than integrating to 2000 m everywhere as done previously, allows closure of the global seasonal energy budget within statistical uncertainties. The seasonal cycle of energy storage is largest in the ocean, peaking in April because ocean area is largest in the Southern Hemisphere and the ocean’s thermal inertia causes a lag with respect to the austral summer solstice. Seasonal cycles in energy storage in the atmosphere and land are smaller, but peak in July and September, respectively, because there is more land in the Northern Hemisphere, and the land has more thermal inertia than the atmosphere. Global seasonal energy storage by ice is small, so the atmosphere and land partially offset ocean energy storage in the global integral, with their sum matching time-integrated net global TOA energy fluxes over the seasonal cycle within uncertainties, and both peaking in April.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2000

Assimilation of Combined Microwave and Lightning Measurement in a Mesoscale Weather Prediction Model

Intermittent measurements of precipitation and integrated water vapor (IWV) distributions were retrieved from the Special Sensor Microwave/Imager (SSM/I) and Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) radiometers. Lightning generates very low frequency (VLF) radio noise pulses called sferics. Those pulses propagate over large distances so that they can be continuously monitored with a sparse network of ground based radio receivers. Sferics data, tuned with intermittent spaceborne microwave radiometer data, were used to generate estimated rainfall that was assimilated into a mesoscale weather prediction model. Both continuous latent heating adjustment and a variational technique are applied as assimilation procedures to evaluate the impact of lightning observations on the forecast of an intense winter squall line over the Gulf of Mexico. Sensitivities to the assimilation of additional measurements such as IWV and sea surface temperature (SST), and measurement errors will also be discussed.

Chang, Dong-Eon↗
NASA NTRS2018

Bayesian Geostatistical Modelling of PM10 and PM2.5 Surface Level Concentrations in Europe Using High-Resolution Satellite-Derived Products

Air quality monitoring across Europe is mainly based on in situ ground stations which are too sparse to accurately assess the exposure effects of air pollution for the entire continent. The demand for precise predictive modelsthat estimate gridded geophysical parameters of ambient air at high spatial resolution has rapidly grown. Here, we investigate the potential of satellite derived products to improve particulate matter (PM) estimates. Bayesiangeostatistical models addressing confounding between the spatial distribution of pollutants and remotely sensed predictors were developed to estimate yearly averages of both, fine (PM2.5) and coarse (PM10) surface PM concentrations at 1 sq.km spatial resolution over 46 European countries and were compared to geostatistical, geographically weighted and land-use regression formulations. Rigorous model selection identified the Earth observation data which contribute most to pollutants' estimation. Geostatistical models outperformed the predictive ability of the frequently employed land-use regression. The resulting estimates of PM10 and PM2.5, which represent the main air quality indicators for the urban Sustainable Development Goal, indicate that in 2016, 66.2% of the European population was breathing air above the WHO Air Quality Guidelines thresholds. Our estimates are readily available to policy makers and scientists assessing the effects of long-term exposure to pollution on human and ecosystem health.

Beloconi, Anton↗
NASA NTRS1995

Inferring the thermal-infrared hemispheric emission from a sparsely-vegetated surface by directional measurements

The thermal-infrared (longwave) emission from a vegetated terrain is generally anisotropic, i.e., the emission temperature varies with the view direction. If a directional measurement of temperature is considered to be equal to the effective temperature of the hemispheric emission, then the estimate of the latter can be significantly in error. The view-direction (zenith angle theta(sub eq) at which the emission equivalence does hold is determined in our modeling study. In a two-temperature field-of-view (soil and plants), theta(sub eq) falls in a narrow range depending on plant density and canopy architecture. Theta(sub eq) does not depend on soil and (uniform) plant temperatures nor on their ratio, even though the pattern of emission vs. the view direction depends crucially on this ratio. For a sparse canopy represented as thin, vertical cylindrical stalks (or vertical blades uniformly distributed in azimuth) with horizontal facets, theta(sub eq) ranges from 48 to 53 deg depending on the optical density of the vertical elements alone. When plant elements are modeled as small spheres, theta(sub eq) lies between 53 to 57 deg (for the same values of the canopy optical density). Only for horizontal leaves (a truly planophile canopy) is the temperature measured from any direction equal to the temperature of the hemispheric emission. When the emission temperature changes with optical depth within the canopy at a specified rate, theta(sub eq) depends to some extent on that rate. For practically any sparsely vegetated surface, a directional measurement at the zenith angle of 50 deg offers an appropriate evaluation of the hemispheric emission, since the error in the estimate will, at most, only slightly exceed 1% (around 4 W/sq m). Estimates of the hemispheric emission through a nadir measurement, on the other hand, can be in error in some cases by about 10%, i.e., on the order of 40 W/sq m.

Otterman, J.↗
DOE OSTI2023

Context-aware learning of hierarchies of low-fidelity models for multi-fidelity uncertainty quantification

Multi-fidelity Monte Carlo methods leverage low-fidelity and surrogate models for variance reduction to make tractable uncertainty quantification even when numerically simulating the physical systems of interest with high-fidelity models is computationally expensive. This work proposes a context-aware multi-fidelity Monte Carlo method that optimally balances the costs of training low-fidelity models with the costs of Monte Carlo sampling. It generalizes the previously developed context-aware bi-fidelity Monte Carlo method to hierarchies of multiple models and to more general types of low-fidelity models. When training low-fidelity models, the proposed approach takes into account the context in which the learned low-fidelity models will be used, namely for variance reduction in Monte Carlo estimation, which allows it to find optimal trade-offs between training and sampling to minimize upper bounds of the mean-squared errors of the estimators for given computational budgets. This is in stark contrast to traditional surrogate modeling and model reduction techniques that construct low-fidelity models with the primary goal of approximating well the high-fidelity model outputs and typically ignore the context in which the learned models will be used in upstream tasks. Further, the proposed context-aware multi-fidelity Monte Carlo method applies to hierarchies of a wide range of types of low-fidelity models such as sparse-grid and deep-network models. Numerical experiments with the gyrokinetic simulation code Gene show speedups of up to two orders of magnitude compared to standard estimators when quantifying uncertainties in small-scale fluctuations in confined plasma in fusion reactors. This corresponds to a runtime reduction from 72 days to four hours on one node of the Lonestar6 supercomputer at the Texas Advanced Computing Center.

42 ENGINEERING↗
NASA NTRS2020

Recommendations for Using Noise Monitors to Estimate Noise Exposure During X-59 Community Tests

A low fidelity simulation approach is used to explore how to place and use noise monitors during X-59 QueSST community tests, where people’s annoyance to the noise produced by the X-59 aircraft will be gathered. Several recommendations are provided including: 1) the desired number of sparsely spaced noise monitor sites within the survey area, 2) whether to group and average measurements across multiple noise monitors located at a site, 3) what spacing should be used if grouped noise monitors are used, 4) an approach to mitigate ambient noise contamination at the measurement sites, 5) a method to combine empirical and predicted dose estimates to provide a single dose estimate for respondents, and 6) assessing how changes in turbulence intensity and array configuration affect dose uncertainty. To make these recommendations, the error that is expected when fitting contrived, smoothly varying sonic boom “reference exposure surfaces” is studied when a spatially sparse and scattered set of samples is used as responses for the fit. The reference exposure surfaces mimic the sonic boom exposure at ground level that might be expected in the X-59 survey area in the absence of atmospheric turbulence, ambient noise, and other localized effects. The spatial extent of these surfaces varies and is representative of the different survey area sizes that might be expected during future X-59 community overflight tests. These contrived reference surfaces are sampled, and those reference samples are then perturbed to mimic atmospheric turbulence, ambient noise and other localized effects that might affect noise monitor measurements within overflown communities. Two different surface fitting methods are investigated when fitting these perturbed samples to approximate the reference surface. The first method uses interpolation between the perturbed data at the scattered sites to compute the fit. The second method fits a polynomial surface model to the perturbed data using ordinary least squares regression analysis. For both fitting methods, the root mean square fit error is computed from the pointwise difference between the fit surface and the reference surface as the count and configuration of the sites is varied while also averaging the error across many different realizations of both the smooth variation of the reference exposure surface and the random, localized perturbations at the sample sites. Different site configurations are compared using this error statistic to make the recommendations noted above. Additionally, the two fitting approaches (interpolation vs linear regression) are compared based on the fit error observed in these simulations. These analyses, comparisons, and recommendations should inform future decisions on the noise monitor placement and the methods used to analyze the noise monitor data that is collected during X-59 community overflights.

sonic boom↗
NASA NTRS2022

Herbarium records provide reliable phenology estimates in the understudied tropics

1. Plant phenology has been shifting dramatically in response to climate change, a shift that may have significant and widespread ecological consequences. Of particular concern are tropical biomes, which represent the most biodiverse and imperilled regions of the world. However, compared to temperate floras, we know little about phenological responses of tropical plants because long-term observational datasets from the tropics are sparse. 2. Herbarium specimens have greatly increased our phenological knowledge in temperate regions, but similar data have been underutilized in the tropics and their suitability for this purpose has not been broadly validated. Here, we compare phenological estimates derived from field observational data (i.e. plot surveys) and herbarium specimens at various spatial and taxonomic scales to determine whether specimens can provide accurate estimations of reproductive timing and its spatial variation. 3. Here, we demonstrate that phenological estimates from field observations and herbarium specimens coincide well. Fewer than 5% of the species exhibited significant differences between flowering periods inferred from field observations versus specimens regardless of spatial aggregation. In contrast to studies based on field records, herbarium specimens sampled much larger geographic and climatic ranges, as has been documented previously for temperate plants, and effectively captured phenological responses across varied environments. 4. Synthesis. Herbarium specimens are verified to be a vital resource for closing the gap in our phenological knowledge of tropical systems. Tropical plant reproductive phenology inferred from herbarium records is widely congruent with field observations, suggesting that they can and should be used to investigate phenological variation and their associated environmental cues more broadly across tropical biomes.

Brazil↗
DOE OSTI2024

Inferring the Focal Depths of Small Earthquakes in Southern California Using Physics-Based Waveform Features

Determining the depths of small crustal earthquakes is challenging in many regions of the world, because most seismic networks are too sparse to resolve trade-offs between depth and origin time with conventional arrival-time methods. Precise and accurate depth estimation is important, because it can help seismologists discriminate between earthquakes and explosions, which is relevant to monitoring nuclear test ban treaties and producing earthquake catalogs that are uncontaminated by mining blasts. Here, we examine the depth sensitivity of several physics-based waveform features for ~8000 earthquakes in southern California that have well-resolved depths from arrival-time inversion. We focus on small earthquakes (2 < M L < 4) recorded at local distances (<150 km), for which depth estimation is especially challenging. We find that differential magnitudes (M w /M L –M c ) are positively correlated with focal depth, implying that coda wave excitation decreases with focal depth. We analyze a simple proxy for relative frequency content, Φ≡log 10 (M 0 )+3log 10 (f c ), and find that source spectra are preferentially enriched in high frequencies, or “blue-shifted,” as focal depth increases. Here, we also find that two spectral amplitude ratios Rg 0.5–2 Hz/Sg 0.5–8 Hz and Pg/Sg at 3–8 Hz decrease as focal depth increases. Using multilinear regression with these features as predictor variables, we develop models that can explain 11%–59% of the variance in depths within 10 subregions and 25% of the depth variance across southern California as a whole. We suggest that incorporating these features into a machine learning workflow could help resolve focal depths in regions that are poorly instrumented and lack large databases of well-located events. Some of the waveform features we evaluate in this study have previously been used as source discriminants, and our results imply that their effectiveness in discrimination is partially because explosions generally occur at shallower depths than earthquakes.

58 GEOSCIENCES↗
DOE OSTI2026

Teleseismic Network Association with GENIE

In this report we investigate adapting the Graph Neural Interpretation Engine (GENIE), an associator developed for three-component dense monitoring networks, to regional to teleseismic association using a sparse network of array stations. We expand GENIE’s input features to include first-P detection time, azimuth, and slowness estimates. Additionally, we include a probability of detection (PDET) term which measures a station’s likelihood of detecting an event. To assess each feature’s relative importance, we train four models, each using an increasing set of node features and find that the PDET models perform the best. We define two measures of event complexity which demonstrate that all GENIE model versions perform better than the standard backprojection stack.

47 OTHER INSTRUMENTATION↗
NASA NTRS1985

Theoretical studies of the marine sulfur cycle

Several reduced sulfur compounds are produced by marine organisms and then enter the atmosphere, where they are oxidized and ultimately returned to the ocean or the land. The oceanic dimethyl sulfide (DMS) flux, in particular, represents a significant fraction of the annual global sulfur input to the atmosphere. In the atmosphere, this gas is converted to sulfur dioxide (SO2), methane sulfonic acid, and other organic acids which are relatively stable and about which little is known. SO2 is a short lived gas which, in turn, is converted to sulfuric acid and other sulfate compounds which contribute significantly to acid rain. Because of the complexity of the sulfur system, it is not well understood even in the unperturbed atmosphere. However, a number of new observations and experiments have led to a significant increase in the understanding of this system. A number of one dimensional model experiments were conducted on the gas phase part of the marine sulfur cycle. The results indicate the measured concentration of DMS and the amplitude of its diurnal cycle are in agreement with estimates of its global flux. It was also found that DMS can make a large contribution to the background SO2 concentration in the free troposphere. Estimates of CS2 concentrations in the atmosphere are inconsistent with estimated fluxes; however, measured reaction rates are consistent with the observed steep tropospheric gradient in CS2. Observations of CS2 are extremely sparse. Further study is planned.

Toon, Owen B.↗