SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Transportable Applications Executive (TAE) implementation may impose a strain on centers with modest resources. This may be eased in a number of ways. The balance of a small number of expert users and a large number of computing novices at the Interactive Planetary Image-Processing System (IPIPS) imposes special constraints. Some solutions to these and other particular problems are described.
Collaboration between Medical Informatics and Healthcare Systems (MIHCS) at NASA/Johnson Space Center (JSC) and the Texas Medical Center (TMC) Library was established to investigate technologies for facilitating knowledge discovery across multiple life sciences research disciplines in multiple repositories. After reviewing 14 potential Enterprise Search System (ESS) solutions, Collexis was determined to best meet the expressed needs. A three month pilot evaluation of Collexis produced positive reports from multiple scientists across 12 research disciplines. The joint venture and a pilot-phased approach achieved the desired results without the high cost of purchasing software, hardware or additional resources to conduct the task. Medical research is highly compartmentalized by discipline, e.g. cardiology, immunology, neurology. The medical research community at large, as well as at JSC, recognizes the need for cross-referencing relevant information to generate best evidence. Cross-discipline collaboration at JSC is specifically required to close knowledge gaps affecting space exploration. To facilitate knowledge discovery across these communities, MIHCS combined expertise with the TMC library and found Collexis to best fit the needs of our researchers including:
Hydrodynamic effects are analyzed for a stepped piston moving within a tight clearance tube filled with an incompressible fluid. Hydrostatic effects are analyzed and a complete solution is obtained and an optimum step design for centering of the piston is suggested. The axial speed resulting from an axial driving force is calculated, and some experimental results for pistons falling in a water-filled tube are presented.
Flight controllers in NASA s mission control centers work day and night to ensure that missions succeed and crews are safe. The IT goals of NASA mission control centers are similar to those of most businesses: to evolve IT infrastructure from basic to dynamic. This paper describes Mission Control Technologies (MCT), an application platform that is powering mission control today and is designed to meet the needs of future NASA control centers. MCT is an extensible platform that provides GUI components and a runtime environment. The platform enables NASA s IT goals through its use of lightweight interfaces and configurable components, which promote standardization and incorporate useful solution patterns. The MCT architecture positions mission control centers to reach the goal of dynamic IT, leading to lower cost of ownership, and treating software as a strategic investment.
This study investigates the effects of a uniform temperature change on the stresses and deformations of composite tubes and determines the accuracy of an approximate solution based on the principle of complementary virtual work. Interest centers on tube response away from the ends and so a planar elasticity approach is used. For the approximate solution a piecewise linear variation of stresses with the radial coordinate is assumed. The results from the approximate solution are compared with the elasticity solution. The stress predictions agree well, particularly peak interlaminar stresses. Surprisingly, the axial deformations also agree well, despite the fact that the deformations predicted by the approximate solution do not satisfy the interface displacement continuity conditions required by the elasticity solution. The study shows that the axial thermal expansion coefficient of tubes with a specific number of axial and circumferential layers depends on the stacking sequence. This is in contrast to classical lamination theory, which predicts that the expansion will be independent of the stacking arrangement. As expected, the sign and magnitude of the peak interlaminar stresses depend on stacking sequence. For tubes with a specific number of axial and circumferential layers, thermally induced interlaminar stresses can be controlled by altering stacking arrangement.
A solution-adaptive grid algorithm has been developed for use in two and three dimensions. The algorithm uses a transformation from the cartesian coordinate system to a general coordinate space, which will be defined as a parallelepiped. A weighting function for adaption of the grid is developed that will allow adaption to the gradients of any combination of dependent variables in the flow. The adaption is carried out in the parametric space and a simple inverse mapping to return the new parametric space to the physical space is derived. The concept used to relocate the grid-points in the parametric space is based on the center of mass of distributed weights. Solution-adaptive results are presented for various laminar flows in two dimensions and for mathematical weighting functions in three dimensions.
Groundswell, Inc., in partnership with the Maryland Energy Administration (MEA), Ayika Solutions, the National Renewable Energy Lab (NREL), and the Baltimore Office of Sustainability, is advancing a vision for resilient, community-centered energy systems in Maryland. This effort aligns with Groundswell's commitment to a clean energy economy that equitably benefits all communities, closing gaps in representation, wages, and access to wealth generation, savings, and local jobs within a diverse energy supply chain. Project Vision and Objectives The project emphasizes "energy resilience," defined as a community’s capacity to anticipate, adapt to, and swiftly recover from power disruptions through inclusive planning and technical solutions. The approach centers on Resilience Hubs—designated community facilities equipped to support residents before, during, and after power-related disruptions. These hubs offer emergency resources, coordinate communications, and deliver essential services while reducing carbon emissions, ultimately enhancing residents' quality of life. Additionally, Resilience Hubs foster social connections, support disaster preparedness, and provide spaces for community programming and everyday use. The goals of Resilient Communities Maryland include: Developing a replicable framework for community energy resilience, applicable beyond Maryland. Defining community-led indicators of social impact and resilience. Establishing equitable decision-making processes in project design and implementation. Informing MEA of practical, community-based resilience strategies to shape future state initiatives. Approach Groundswell and its partners prioritize collaborative engagement with local stakeholders, ensuring that solutions are responsive to each community's unique needs. By integrating feedback from residents, local organizations, and government entities, the team has developed a holistic model for resilience that balances immediate benefits, such as improved emergency response, with long-term gains in social equity and environmental sustainability. Key Outcomes This initiative has produced valuable resources and insights, including: A Community Energy Resilience Framework: Designed to guide other communities in establishing energy resilience strategies tailored to their specific needs. Case Studies: Documenting best practices and lessons learned from pilot projects to serve as models for future resilience efforts. Community-Driven Impact Metrics: Highlighting the positive social impacts that resilience initiatives can bring, such as improved social connectedness and local decision-making power. Recommendations for MEA: Offering evidence-based insights to inform policies and funding opportunities that support resilient energy infrastructure in vulnerable communities. Next Steps Groundswell's final report will detail findings, including the potential for scaling resilience hubs across Maryland and other regions, with a focus on equitable access and community-driven outcomes. This project underscores the importance of aligning energy resilience with social equity, reinforcing community agency, and building systems that withstand and recover from future challenges effectively and sustainably.
A piloted simulation test was conducted on the Ames Research Center's vertical motion simulator (VMS) in support of the Phase 2A flight test of NASA's V/STOL systems research aircraft (VSRA). During the simulation several problems were found with the head-up display (HUD) symbol drive laws and the flightpath synthesis. These problems and the solutions devised to solve them are described. Most of the resulting HUD drive-law changes were implemented during the simulation and their effectiveness was verified. Subsequently both the HUD symbol drive-law and flightpath-synthesis changes were implemented in the VSRA and tested successfully in the Phase 2A flight tests.
The problem of propagation of sound across the shear layer in a turbofan jet exhaust with an external center-body is discussed. The wave equation of interest is the compressible Rayleigh equation. Two forms of the equation are considered, and the Green's function solutions, subject to appropriate surface conditions on the center-body and flight condition in the ambient, are presented. Directivity studies in a heated exhaust at temperature ratio of 2.0 and Mach number 0.90 indicate that a rigid center-body tends to increase the sound propagation at forward angles relative to an exhaust without a center-body, while application of suitable surface liner may significantly reduce this enhancement.
Each NASA Distributed Active Archive Center (DAAC) faces the challenge of dealing with an increasingly diverse number of publishable data products from diverse data producers. Data producers, on the other hand, may experience pain points when interacting with the EOSDIS for the first time or when publishing different data at different DAACs. As a result, there has been a growing need to develop a common software framework that serves as a common interface for data producers, rigorously defines the data publication procedure for DAAC staff, facilitates the management of various data publication processes, and tracks the progress of data publication. This software should also account for the different configurations at different DAACs. Currently, two primary data publication workflow and tracking tools exist in operation at the EOSDIS: Semi-Automated ingest System (SAuS) and Data Publication workflow Portal (DAPPeR). However, neither tool is cloud-ready. Automated data processing could be managed by Cumulus, an EOSDIS cloud-based data ingest, archive and management system. However, Cumulus does not support manual tasks or on-premise implementations. We propose to develop the Earthdata Publication Minimum Viable Product (Earthdata Pub MVP) -- a cloud-hosted solution that works with both cloud and on-premise systems and implements the communications and exchange requirements generated by the Earthdata Pub information architecture team.
A method is presented to calculate the three-dimensional displacement surface about a hypersonic aircraft. This calculation requires a flow-field-solution to at least the thin-layer Navier-Stokes equations about the aircraft as input. An upwind, finite-volume code developed at NASA Langley Research Center was used to obtain the flow-field solution. The displacement surface is the three-dimensional counterpart to the two-dimensional displacement thickness. Flow-field solutions, along with the displacement surface calculations, are presented for a generic hypersonic aircraft at a Mach number of 24.5 and angle of attack of zero and one degree.
An adaptive grid algorithm has been developed in two and three dimensions that can be used dynamically with a solver or as part of a grid refinement process. The algorithm employs a transformation from the Cartesian coordinate system to a general coordinate space, which is defined as a parallelepiped in three dimensions. A weighting function, independent for each coordinate direction, is developed that will provide the desired refinement criteria in regions of high solution gradient. The adaptation is performed in the general coordinate space and the new grid locations are returned to the Cartesian space via a simple, one-step inverse mapping. The algorithm for relocation of the mesh points in the parametric space is based on the center of mass for distributed weights. Dynamic solution-adaptive results are presented for laminar flows in two and three dimensions.
Rapid growth in demand from data centers and other large loads is creating a range of new challenges for electricity planners, investors, system operators, and regulators, leading to bottlenecks that have slowed connection of large loads to the electric grid. In response, innovative solutions for accelerating large load connections are beginning to emerge across the U.S. Drawing on an extensive document and literature review, this report identifies more than 40 potential solutions for accelerating large load connections, organized into five functional areas: load forecasting, interconnection, resource planning and procurement, markets and operations, and cost allocation and ratemaking. The five functional areas provide a framework for organizing challenges and solutions to large load connection bottlenecks.
Hydrodynamic effects are analyzed for a stepped piston moving within a tight clearance tube filled with an incompressible fluid. Together with the hydrostatic effects that were analyzed in an earlier paper, a complete solution is obtained and an optimum step design for centering of the piston is suggested. The axial speed resulting from an axial driving force is calculated, and some experimental results for pistons falling in a water filled tube are presented.
The flexure-torsion behavior of a tip-loaded cantilever beam with an arbitrary cross-section is studied using Saint-Venant's semi-inverse method along with a power series solution for the out-of-plane flexure and torsion warping functions. The power series coefficients are determined by solving a set of variationally derived linear algebraic equations. For complex cross-sections, the calculated coefficients represent a 'best-fit approximation' to the exact warping function. The resulting warping functions are used to determine the cross-section properties including: the torsion constant, shear deformation coefficients, shear correction factors, and the shear center location. A new linear relation is developed for locating the shear center using the Saint-Venant flexure and torsion solutions, where the twist rate is zero about the line of shear centers (not the centroidal axis). Numerical results are presented for a triangular cross-section and different NACA airfoils.
The Gravity Recovery and Climate Experiment (GRACE) and GRACE-Follow On missions have provided a global history of terrestrial water storage changes since 2002. Traditional GRACE products resolve monthly time-variable gravity at spatial resolutions of 300-500 km, with many recent efforts focusing on regularized mass concentration (mascon) solutions to better resolve signals spatially. However, monthly resolution inhibits the applicability of GRACE to investigations of sub-monthly signals. This study presents a new daily mass change solution estimated as deviations from the NASA Goddard Space Flight Center (GSFC) converged monthly mascon product and quantifies the fundamental trade-off between temporal and spatial resolution in GRACE-only solutions. As an iteration of the GSFC product, this daily solution represents a mixing of monthly information at higher relative spatial resolution with daily information at lower relative spatial resolution, resolving each temporal scale at the best resolution achievable without requiring hydrological model dependencies in the estimation. The resolution of the daily mascons is 300-400 km at high latitudes and 600-1,000 km lower, depending on each daily orbital track and the proximity of each mascon to constraint region boundaries (e.g., coastlines). Through simulations and model comparisons, we demonstrate that daily signals over areas larger than 400,000 km(2) are recoverable, with basins larger than 800,000 km(2) exhibiting strong signal recovery relative to leakage. This analysis establishes baselines for daily signal recovery from GRACE in the context of longer time scale solutions, characterizes leakage inherent in daily GRACE information, and creates new opportunities for applying GRACE to investigations of sub-monthly signals.
The results of a study to investigate concepts for minimizing trim drag of horizontal takeoff single-stage-to-orbit (SSTO) vehicles are presented. A generic hypersonic airbreathing conical configuration was used as the subject aircraft. The investigation indicates that extreme forward migration of the aerodynamic center as the vehicle accelerates to orbital velocities causes severe aerodynamic instability and trim moments that must be counteracted. Adequate stability can be provided by active control of elevons and rudder, but use of elevons to produce trim moments results in excessive trim drag and fuel consumption. To alleviate this problem, two solution concepts are examined. Active control of the center of gravity (COG) location to track the aerodynamic center decreases trim moment requirements, reduces elevon deflections, and leads to significant fuel savings. Active control of the direction of the thrust vector produces required trim moments, reduces elevon deflections, and also results in significant fuel savings. It is concluded that the combination of active flight control to provide stabilization, (COG) position control to minimize trim moment requirements, and thrust vectoring to generate required trim moments has the potential to significantly reduce fuel consumption during ascent to orbit of horizontal takeoff SSTO vehicles.
The Flight Dynamics Facility (FDF) at the Goddard Space Flight Center (GSFC) performs Tracking and Data Relay Satellite (TDRS) orbit determination for the Space Network (SN) and for TDRS System (TDRSS) users. The Terra (Earth Observing System (EOS) AM-1) satellite requires TDRS ephemerides with 30 accuracies of 75 meters in position and 5.5 millimeters per second in velocity predicted over 1 day onboard, including updates by 4.5 hours after TDRS maneuvers. This analysis reviews the accuracy of 209 postmaneuver orbit solutions for 6 TDRSs since February 1998.