Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Salt-assistant combustion synthesis of nanocrystalline Nd{sub 2}(Zr{sub 1-x}Sn{sub x}){sub 2}O{sub 7} (0 {<=} x {<=} 1) solid solutions

Nanocrystalline Nd{sub 2}(Zr{sub 1-x}Sn{sub x}){sub 2}O{sub 7} series solid solutions were prepared by a convenient salt-assisted combustion process using glycine as fuel. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, transmission electron microscopy and high-resolution transmission electron microscopy. The results showed the Zr ion can be partially replaced by Sn ion. The partial substituted products were still single-phase solid solutions and the crystal form remained unchanged. TEM images reveal that the products are composed of well-dispersed square-shaped nanocrystals. The method provides a convenient and low-cost route for the synthesis of nanostructures of oxide materials.

36 MATERIALS SCIENCE↗

Magnetic structures of FeTiO{sub 3}-Fe{sub 2}O{sub 3} solid solution thin films studied by soft X-ray magnetic circular dichroism and ab initio multiplet calculations

The solid solutions between ilmenite (FeTiO{sub 3}) and hematite (α-Fe{sub 2}O{sub 3}) have recently attracted considerable attention as a spintronic material due to their interesting magnetic and electrical properties. In this study, the electronic and magnetic structures of epitaxially grown 0.6FeTiO{sub 3}·0.4Fe{sub 2}O{sub 3} solid solution thin films were investigated by combining x-ray absorption near-edge structure (XANES), x-ray magnetic circular dichroism (XMCD) for two different crystallographic projections, and first-principles theoretical calculations. The Fe L-edge XANES and XMCD spectra reveal that Fe is in the mixed-valent Fe{sup 2+}–Fe{sup 3+} states while Fe{sup 2+} ions are mainly responsible for the magnetization. Moreover, the experimental Fe L-edge XANES and XMCD spectra change depending on the incident x-ray directions, and the theoretical spectra explain such spectral features. We also find a large orbital magnetic moment, which can originate the magnetic anisotropy of this system. On the other hand, although the valence state of Ti was interpreted to be 4+ from the Ti L-edge XANES, XMCD signals indicate that some electrons are present in the Ti-3d orbital, which are coupled antiparallel to the magnetic moment of Fe{sup 2+} ions.

36 MATERIALS SCIENCE↗

Evaluation of solid solution formation between ThO2 and δ-Bi2O3 by molecular precursor route

Highlights: • Molecular precursor route for the solid solution evaluation of ThO{sub 2}-BiO{sub 1.5}. • Up to 60 mol % of Bi{sup 3+} could be dissolved in fluorite structured ThO{sub 2}. • Oxygen vacancies manifested as defect bands after Bi{sup 3+} incorporation. • Narrowing of direct band gap with increasing Bi{sup 3+} concentration. - Abstract: The high chelating ability of nitrilotriacetic acid has been advantageously utilized to prepare molecular precursors containing thorium and bismuth. This aided to determine the extent of solid solution formation between thoria and δ-Bi{sub 2}O{sub 3} in fluorite structure by calcining the precursors in air. Up to 60 atomic % of Bi{sup 3+} could be substituted for Th{sup 4+} in fluorite structure beyond which phase separation occurred. Slight increase in cubic lattice constant was observed with increasing bismuth content along with indication of increased tensile strain of lattice. Porous morphology and presence of bismuth in calcined samples were confirmed from SEM and EDX measurements. Defect bands emerged in the Raman spectra near 590 cm{sup −1} in addition to a fluorite band near 460 cm{sup −1} for the bismuth substituted samples. Intermediate energy states were formed by the substitution of Bi{sup 3+} for Th{sup 4+} arising possibly from oxygen vacancies and it resulted in narrowing of direct band gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect evolution in Ni and solid-solution alloys of NiFe and NiFeCoCr under ion irradiation at 16 and 300 K

Single-phase concentrated solid-solution alloys (SP-CSAs) have shown unique chemical complexity at the levels of electrons and atoms, and their defect evolution is expected to be different from conventional dilute alloys. Single crystals of Ni, NiFe and NiFeCoCr are chosen as model systems to understand the chemical complexity on defect formation and damage accumulation in SP-CSAs under ion irradiation. The high-quality crystals were irradiated at 16 and 300 K to different ion fluences, to form irradiated region with little to heavy damages. Additionally, the ion-induced damage was determined using Rutherford backscattering spectrometry technique along a channeling direction (RBS/C) and the level of lattice damage in irradiated Ni and SP-CSAs was quantified from Monte Carlo (MC) simulations. The results are interpreted using the Multi Step Damage Accumulation model to reveal material damage accumulation kinetics. Key findings of the study are that in case of room temperature irradiations the damage level measured for complex alloys at the highest irradiation fluence of 2 × 10 15 cm -2 (~3 dpa) is significantly higher than that obtained for pure nickel samples and suggest two-step damage accumulation process with a defect transformation taking place at a fluence of about 1.5 × 10 15 cm -2 . Furthermore, structural and damage kinetic differences clearly imply that, with increasing degree of chemical complexity and high solid-solution strengthening effects from Ni to NiFe and to NiFeCoCr, the enhanced lattice stiffness resists to randomization of atomic configurations and inhibits the growth of extended defects.

36 MATERIALS SCIENCE↗

Conductivity, structure, and thermodynamics of Y 2 Ti 2 O 7 –Y 3 NbO 7 solid solutions

The defect fluorite yttrium niobate Y 3 NbO 7 and pyrochlore yttrium titanate Y 2 Ti 2 O 7 solid solutions have been synthesized via a solid state synthesis route. The resulting stoichiometry of the oxides is Y 2+x Ti 2-2x Nb x O 7 , where x = 0 to x = 1. All of the samples were single-phase; however, for those with a predominant fluorite phase, a small amount of additional pyrochlore phase was detected. The volume of the solid solution unit cells linearly increases with increase in yttrium niobate content. The water uptake increases with (x) and the protonic defect concentration reaches almost 4.5 × 10 -3 mol mol -1 at 300 °C. The calculated enthalpy of formation from oxides suggests strong stability for all of the compositions, with the values of enthalpy ranging from -84.6 to -114.3 kJ mol -1 . The total conductivity does not have a visible dependence on Y 3 NbO 7 content. For each compound, the total conductivity is higher in wet air. Interestingly, for samples where x < 0.5, the ratio of conductivity in hydrogen to air increases with increasing temperature, while for x > 0.5, the trend is the opposite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

General and facile synthesis of ceria-based solid solution nanocrystals and their catalytic properties

Uniform Ce{sub 1-x}Zr{sub x}O{sub 2} (x=0.2-0.8) nanocrystals with ultra-small size were synthesized through a thermolysis process, facilitated by the initial formation of precursor (hydrated (Ce,Zr)-hydroxides) at low temperature. TEM, XRD, EDAX, and Raman spectra were employed to study the formation of the solid solutions with various Ce/Zr ratios. Ultraviolet-visible (UV-vis) spectra showed that the ratios of Ce{sup 3+} to Ce{sup 4+} in both surface and bulk for the as-prepared Ce{sub 1-x}Zr{sub x}O{sub 2} nanocrystals increased with the zirconium content x. The well-distributed Zr and Ce in the hydrated (Ce,Zr)-hydroxides before their thermolysis became the crucial factor for the structural homogeneity of the products. In addition, this strategy was extended to the synthesis of Ce{sub 1-x}Gd{sub x}O{sub 1-x/2}, Ce{sub 1-x}Sm{sub x}O{sub 1-x/2}, and Ce{sub 1-x}Sn{sub x}O{sub 2} solid solutions. Catalytic measurements indicated that the ceria-based catalysts were active for CO oxidation at temperatures beyond 250 deg. C and the sequence of catalytic activity was Ce{sub 0.5}Zr{sub 0.5}O{sub 2}>Ce{sub 0.8}Zr{sub 0.2}O{sub 2}>Ce{sub 0.2}Zr{sub 0.8}O{sub 2}>Ce{sub 0.5}Sm{sub 0.5}O{sub 1.75}. - Abstract: Uniform ultra-small nanostructured Ce{sub 1-x}Zr{sub x}O{sub 2}, Ce{sub 1-x}Gd{sub x}O{sub 1-x/2}, Ce{sub 1-x}Sm{sub x}O{sub 1-x/2}, and Ce{sub 1-x}Sn{sub x}O{sub 2} solid solutions with homogeneous textures were synthesized through a thermolysis process, facilitated by the initial formation of precursors (hydrated (Ce,M)-hydroxides). Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and magnetic characterization of the complete delafossite solid solution (CuAlO[subscript 2])[subscript 1;#8722;x](CuCrO[subscript 2])[subscript x]

We have prepared the complete delafossite solid solution series between diamagnetic CuAlO{sub 2} and the t{sub 2g}{sup 3}frustrated antiferromagnet CuCrO{sub 2}. The evolution with composition x in CuAl{sub 1-x}Cr{sub x}O{sub 2} of the crystal structure and magnetic properties has been studied and is reported here. The room-temperature unit cell parameters follow the Vegard law and increase with x as expected. The {mu}{sub eff} is equal to the Cr{sup 3+} spin-only S = 3/2 value throughout the entire solid solution. {Theta}{sub CW} is negative, indicating that the dominant interactions are antiferromagnetic, and its magnitude increases with Cr substitution. For dilute Cr compositions, the nearest-neighbor exchange coupling constant J{sub BB} was estimated by mean-field theory to be 3.0 meV. Despite the sizable {Theta}{sub CW}, long-range antiferromagnetic order does not develop until x is almost 1, and is preceded by glassy behavior. The data presented here, and those on dilute Al substitution from Okuda et al, suggest that the reduction in magnetic frustration due to the presence of non-magnetic Al does not have as dominant an effect on magnetism as chemical disorder and dilution of the magnetic exchange. For all samples, the 5 K isothermal magnetization does not saturate in fields up to 5 T and minimal hysteresis is observed. The presence of antiferromagnetic interactions is clearly evident in the sub-Brillouin behavior with a reduced magnetization per Cr atom. An inspection of the scaled Curie plot reveals that significant short-range antiferromagnetic interactions occur in CuCrO{sub 2} above its Neel temperature, consistent with its magnetic frustration. Uncompensated short-range behavior is present in the Al-substituted samples and is likely a result of chemical disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic and Optical Properties of Au–Co Solid Solution and Phase-Separated Thin Films and Nanoparticles

The chemical composition and morphology of Au x Co 1–x thin films and nanoparticles are controlled via a combination of cosputtering, pulsed laser-induced dewetting (PLiD), and annealing, leading to tunable magnetic and optical properties. Regardless of chemical composition, the as-deposited thin films and as-PLiD nanoparticles are found to possess a face-centered cubic (FCC) Au x Co 1–x solid-solution crystal structure. Annealing results in large phase-separated grains of Au and Co in both the thin films and nanostructures for all chemical compositions. The magnetic and optical properties are characterized via vibrating sample magnetometry (VSM), ellipsometry, optical transmission spectroscopy, and electron energy loss spectroscopy (EELS). Despite the exceptionally high magnetic anisotropy inherent to Co, the presence of sufficient Au (72 atom %) in the Au x Co 1–x solid solution results in superparamagnetic thin films. Among the as-PLiD nanoparticle samples, an increased Co composition leads to a departure from traditional ferromagnetism in favor of wasp-waisted hysteresis caused by magnetic vortices. Phase separation resulting from annealing leads to ferromagnetism for all compositions in both the thin films and nanoparticles. The optical properties of Au x Co 1–x nanostructures are also largely influenced by the chemical morphology, where the Au x Co 1–x intermixed solid solution has significantly damped plasmonic performance relative to pure Au and comparable to pure Co. Phase separation greatly enhances the quality factor, optical absorption, and electron energy loss spectroscopy (EELS) signatures. The enhancement of the localized surface plasmon resonances (LSPRs) scales with the reduction in Co composition, despite EELS evidence that excitation of the Co portions of a nanoparticle can provide a similar, and in some instances enhanced, LSPR resonance compared to Au. This behavior, however, is seemingly limited to the LSPR dipole mode, while higher-order modes are greatly damped by a Co aloof position. As a result, this observed magneto-plasmonic functionality and tunability could be applicable in biomedicine, namely, cancer therapeutics.

annealing (metallurgy)↗

Flux Synthesis of Lattice‐Engineered Rutile Solid Solutions for Acidic Oxygen Evolution

Developing efficient and stable electrocatalysts for the acidic oxygen evolution reaction (OER) is vital for advancing proton exchange membrane water electrolysis (PEMWE) technologies. Here, in this study, we report a flux synthesis of nitrogen-doped Ti–Ru rutile-type solid-solution oxides (M-TiRu 4 ) using molten NaNO 3 as the flux medium. The flux medium promotes the low-temperature conversion of TiN to rutile TiO 2 , while in situ-formed RuO 2 nanoparticles facilitate lattice templating and couple with interfacial ion migration, enabling the formation of homogeneous solid solutions with abundant lattice heterogeneity. Simultaneously, nitrogen atoms are stably incorporated into the lattice of solid solutions, inducing bandgap narrowing, which enhances electronic conductivity. The developed M-TiRu 4 catalyst exhibits exceptional acidic OER performance, delivering a low overpotential of 194 mV at 10 mA cm −2 , superior durability over 600 h, and a Ru mass activity 7.8 times that of commercial RuO 2 . At the device level, M-TiRu 4 enables PEMWE operation at 1.64 V @ 2 A cm −2 and maintains stable performance at 500 mA cm −2 for 200 h with a minimal degradation rate of 20 µV h −1 . This work demonstrates a robust approach for designing high-performance, durable acidic OER catalysts via synergistic lattice and electronic structure engineering, paving the way for next-generation water-splitting technologies.

Wang, Fan [Univ. of Tennessee, Knoxville, TN (Unit↗

Al and Zn Impurity Diffusion in Binary and Ternary Magnesium Solid-Solutions

Magnesium alloys are considered for implementation into structural components where energy-efficiency and light-weighting are important. Two of the most common alloying elements in magnesium alloys are Aluminum and Zinc. The present work examines impurity diffusion coefficients of Al and Zn in Mg(Zn) and Mg(Al) binary solid solutions, respectively. Experimental investigation is carried out with ternary diffusion couples with polycrystalline alloys. Concentration profiles were measured by electron microprobe micro-analysis and the impurity diffusion coefficients were determined by the Hall Method. Results of Al and Zn impurity diffusion in Mg solid solutions are reported, and examined as a function of composition of Mg solid solution.

aluminum↗

Theoretical study on phase coexistence in ferroelectric solid solutions near the tricritical point

Phase coexistence in ferroelectric solid solutions near the tricritical point has been theoretically analyzed by using the Landau-Devonshire theory. Results revealed that different phases having similar potential wells could coexist in a narrow composition range near the tricritical point in the classical Pb(Zr{sub 1−x}Ti{sub x})O{sub 3} system. The potential barrier between potential wells increases with the decrease of temperature. Coexisting phases or different domains of the same phase can produce adaptive strains to maintain atomic coherency at the interfaces or domain walls. Such compatibility strains have influence on the energy potential as well as the stability of relative phases, leading to the appearance of energetically unfavorable monoclinic phases. Those competing and coexisting phases also construct an easy phase transition path with small energy barrier in between, so that very small stimuli can produce large response in compositions near the morphotropic phase boundary, especially near the tricritical point.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards new zero-thermal-expansion materials: Li-free quartz solid solutions stuffed with transition metal cations

Stuffed aluminosilicate quartz solid solutions (Qss) represent the main functional component of state-of-the-art zero-thermal-expansion glass-ceramics. For the first time, we present the synthesis of Li-, Mg- and Zn-free Qss solely stuffed with transition metal cations (Fe 2+ , Ni 2+ , Co 2+ ); partial Li + co-doping enables also significant Mn 2+ incorporation. Further, they were obtained by glass powder crystallization; Qss crystals exhibit compositionally tunable coefficients of thermal expansion (CTEs), from - 2 × 10 -6 K -1 to ~10 × 10 -6 K -1 in the range 30–300 °C. Co 2+ -bearing crystals exhibit the closest-to-zero CTE value (0.2 ×10 -6 K -1 ) and the most isotropic behavior in the whole Qss family, opening up new perspectives for the development of Li-free low-expansion materials. From a structural point of view, we identified the unit cell volume (and not the pseudo-hexagonality of the aluminosilicate framework) as the key structural parameter leading to low or negative CTEs in Qss, with a linear correlation extending to non-stuffed non-silicate quartz-like phases.

36 MATERIALS SCIENCE↗

Cubic Sc{sub 1-x}Al{sub x}N solid solution thin films deposited by reactive magnetron sputter epitaxy onto ScN(111)

Reactive magnetron sputter epitaxy was used to deposit thin solid films of Sc{sub 1-x}Al{sub x}N (0<=x<=1) onto MgO(111) substrates with ScN(111) seed layers. Stoichiometric films were deposited from elemental Sc and Al targets at substrate temperatures of 600 deg. C. The films were analyzed by Rutherford backscattering spectroscopy, elastic recoil detection analysis, x-ray diffraction, and transmission electron microscopy. Results show that rocksalt structure (c)-Sc{sub 1-x}Al{sub x}N solid solutions with AlN molar fractions up to approx60% can be synthesized. For higher AlN contents, the system phase separates into c- and wurtzite structure (w)-Sc{sub 1-x}Al{sub x}N domains. The w-domains are present in three different orientations relative to the seed layer, namely, Sc{sub 1-x}Al{sub x}N(0001)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], Sc{sub 1-x}Al{sub x}N(1011)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], and Sc{sub 1-x}Al{sub x}N(1011)||ScN(113). The results are compared to first-principles density functional theory calculations for the mixing enthalpies of c-, w-, and zinc blende Sc{sub 0.50}Al{sub 0.50}N solid solutions, yielding metastability with respect to phase separation for all temperatures below the melting points of AlN and ScN.

36 MATERIALS SCIENCE↗

Origin of the solid solution in the LiInSe{sub 2}–In{sub 2}Se{sub 3} system

Techniques of bulk and local analyses were used to characterize the melt-grown single crystals of LiInSe{sub 2}, where yellow matrix coexists together with extended red areas distributed irregularly. Bulk chemical analysis showed that the average stoichiometry of yellow matrix is close to ideal 1:1:2, but red areas are enriched with In{sub 2}Se{sub 3}. An excess In{sub 2}Se{sub 3} is incorporated coherently into the crystal lattice of LiInSe{sub 2}, forming the substitution solid solution with the general formula (Li{sub 1−3x}In{sub x}⎕{sub 2})InSe{sub 2} and changing the color from yellow to red. The test crystals with the 50–55% content of In{sub 2}Se{sub 3} were found by the X-ray analysis to be single phase. The differential dissolution technique, measuring the spatial variation of the composition with high resolution, demonstrated that the single phase crystals in the LiInSe{sub 2}–In{sub 2}Se{sub 3} system might be grown only in a very narrow range close to stoichiometric. Being supersaturated, the heterovalent solid solution phases decompose in the course of cooling, and the concentration micro-heterogeneity occurs in the matrix as the coherent (or incoherent) inclusions of two different types, practically pure selenides of lithium and indium. The origin and scale of the micro-heterogeneity determining the physical properties of LiInSe{sub 2} are discussed as a starting point for the development of physicochemical foundations for growing high quality optical crystals. - Graphical abstract: Differential dissolution technique applied for detection of dispersive precipitates in as-grown LiInSe{sub 2} single crystals: kinetic curves of the phase dissolution: F is the main phase Li{sub 0.96}In{sub 1.01}Se{sub 2} (98.9%), secondary minor phases Li{sub 2}Se (0.1%), In{sub 2}Se{sub 3} (0.9%). - Highlights: • Phase purity of crystals Li{sub 1−3x}In{sub 1+x}Se{sub 2} was examined by a new stoichiographic method. • Breakup of the metastable solid solution with temperature drop was detected. • Dispersive precipitates Li–Se and In–Se of low content result from the breakup. • A crucial role of the precipitates in optical properties of the crystals is shown. • Conditions are given how to grow stoichiometric and single-phase crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamics of concentrated solid solution alloys

This study reviews the three main approaches for predicting the formation of concentrated solid solution alloys (CSSA) and for modeling their thermodynamic properties, in particular, utilizing the methodologies of empirical thermo-physical parameters, CALPHAD method, and first-principles calculations combined with hybrid Monte Carlo/Molecular Dynamics (MC/MD) simulations. In order to speed up CSSA development, a variety of empirical parameters based on Hume-Rothery rules have been developed. Herein, these parameters have been systematically and critically evaluated for their efficiency in predicting solid solution formation. The phase stability of representative CSSA systems is then illustrated from the perspectives of phase diagrams and nucleation driving force plots of the σ phase using CALPHAD method. The temperature-dependent total entropies of the FCC, BCC, HCP, and σ phases in equimolar compositions of various systems are presented next, followed by the thermodynamic properties of mixing of the BCC phase in Al-containing and Ti-containing refractory metal systems. First-principles calculations on model FCC, BCC and HCP CSSA reveal the presence of both positive and negative vibrational entropies of mixing, while the calculated electronic entropies of mixing are negligible. Temperature dependent configurational entropy is determined from the atomic structures obtained from MC/MD simulations. Current status and challenges in using these methodologies as they pertain to thermodynamic property analysis and CSSA design are discussed.

36 MATERIALS SCIENCE↗

Composition-dependent Magnetic Properties of BiFe03-BaTi03 Solid Solution Nanostructures

We report on the Moessbauer spectra and magnetization properties of single-crystalline (BiFeO{sub 3}){sub x-}(BaTiO{sub 3}){sub 1-x} solid solution nanostructures in the form of nanocubes, measuring approximately 150 to 200 nm on a side, prepared by a molten salt solid-state reaction method in the compositional range wherein 0.5 {le} x {le} 1. Powder x-ray diffraction (XRD) and monochromatic synchrotron XRD studies indicate products of high purity, which undergo gradual, well-controlled structural transformations from rhombohedral to tetragonal structures with decreasing 'x.' For all solid solution products, room-temperature magnetization studies exhibit hysteretic behavior with remnant magnetization values of M{sub r} {ge} 0.32 emu/g, indicating that the latent magnetization locked within the toroidal spin structure of BiFeO{sub 3} has been released. Room-temperature Moessbauer spectra show composition-dependent characteristics with decreasing magnetic hyperfine field values and increasing absorption linewidths due to a decrease in the magnetic exchange interaction strength with decreasing x. For the lowest x=0.5 composition studied, the Moessbauer spectra show paramagnetic behavior, indicating a Neel temperature for this composition below 300 K. However, room-temperature magnetization studies with applied fields of up to 50 kOe show hysteretic behavior for all compositions, including the x=0.5 composition, presumably due to field-induced ordering. Furthermore, hysteresis loops for all compositions exhibit smaller coercivities at 10 K than at 300 K, an observation that may suggest the presence of magnetoelectric coupling in these systems.

36 MATERIALS SCIENCE↗

Carriers mobility of InAs- and InP- rich InAs-InP solid solutions irradiated by fast neutrons

We have studied the low temperature charge carriers mobility in bulk single crystals of InAs- and InP- rich InAs-InP solid solutions irradiated with maximum integral flux 2⋅10{sup 18} n/cm{sup 2} of fast neutrons. Influence of minor component small addition in InAs-InP solid solutions has been revealed. There are also presented data of radiation defects thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗