Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Lattice thermal expansion of the solid solutions (La{sub 1−x}Sm{sub x}){sub 2}Ce{sub 2}O{sub 7}

Highlights: • Sm-doped La{sub 2}Ce{sub 2}O{sub 7} was prepared by the coprecipitation–calcination method. • In situ HT-XRD measurements revealed that is much stable than 8YSZ. • Its thermal expansion is better than 8YSZ. - Abstract: A series of solid solutions with the general formula (La{sub 1−x}Sm{sub x}){sub 2}Ce{sub 2}O{sub 7} (0.0 ≤ x ≤ 1.0) were prepared by the coprecipitation–calcination method. The products obtained were characterized by powder X-ray diffraction for phase purity. It was observed that La{sup 3+} and Sm{sup 3+} can form complete solid solution in (La,Sm){sub 2}Ce{sub 2}O{sub 7} with defect-fluorite-type phase. The unit cell parameters of these solutions were calculated by a least squares method and the lattice parameters decreased linearly as x increased. The lattice thermal expansion behavior of (La{sub 1−x}Sm{sub x}){sub 2}Ce{sub 2}O{sub 7} (0.0 ≤ x ≤ 1.0) was investigated by high-temperature X-ray diffraction in the temperature range 298–1623 K. The lattice parameters a{sub T} of all the solutions at different temperature can be expressed as a{sub T} = a + bT + cT{sup 2}. As x < 1, the thermal expansion has a sudden decrease at ca. 473 K. The coefficients of lattice thermal expansion of Sm{sub 2}Ce{sub 2}O{sub 7} were 10.2–13.6 × 10{sup −6} K{sup −1} from 298 to 1623 K, and without the thermal contraction at low temperature. The materials show positive or negative thermal expansion due to the asymmetric anharmonic vibration.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Interdiffusion in Ternary Magnesium Solid Solutions of Aluminum and Zinc

Al and Zn are two of the most common alloying elements in commercial Mg alloys, which can improve the physical properties through solid solution strengthening and precipitation hardening. Diffusion plays a key role in the kinetics of these and other microstructural design relevant to Mg-alloy development. However, there is a lack of multicomponent diffusion data available for Mg alloys. Through solid-to-solid diffusion couples, diffusional interactions of Al and Zn in ternary Mg solid-solution at 400° and 450 °C were examined by an extension of the Boltzmann-Matano analysis based on Onsager s formalism. Concentration profiles of Mg-Al-Zn ternary alloys were determined by electron probe microanalysis, and analyzed to determine the ternary interdiffusion coefficients as a function of composition. Zn was determined to interdiffuse the fastest, followed by Mg and Al. Appreciable diffusional interactions among Mg, Al, and Zn were observed by variations in sign and magnitude of cross interdiffusion coefficients. In particular, Zn was found to significantly influence the interdiffusion of Mg and Al significantly: the and ternary cross interdiffusion coefficients were both negative, and large in magnitude, in comparison to and , respectively. Al and Mg were observed influence the interdiffusion of Mg and Al, respectively, with positive and interdiffusion coefficients, but their influence on the Zn interdiffusion was negligible.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Pressureless sintered beta prime-Si3N4 solid solution: Fabrication, microstructure, and strength

Si3N4, AlN, and Al2O3 were used as basic constituents in a study of the pressureless sintering of beta prime-Si3N4 solid solution as a function of temperature. Y2O3-SiO2 additions were used to promote liquid-phase sintering. The sintered specimens were characterized with respect to density, microstructure, strength, oxidation, and thermal shock resistance. Density greater than 98 percent of theoretical was achieved by pressureless sintering at 1750 C. The microstructure consisted essentially of fine-grained beta prime-Si3N4 solid solution as the major phase. Modulus of rupture strengths up to 483 MPa were achieved at moderate temperature (1000 C), but decreased to 228 MPa at 1380 C. This substantial strength loss was attributed to a glassy grain boundary phase formed during cooling from the sintering temperature. The best oxidation resistance was exhibited by a composition containing 3 mol % Y2O3-SiO2 additives. Water quench thermal shock resistance was equivalent to that of reaction sintered silicon nitride but lower than hot-pressed silicon nitride.

Dutta, S.↗
DOE OSTI2018

Synthesis of CZTS/Se and Their Solid Solution from Electrodeposited Cu–Sn–Zn Metal Precursor: A Study of S and Se Replacement Reaction

Selenization, sulfurization, and sulfo-selenization of electrodeposited metal precursor (Cu-Sn-Zn) at high temperature (500-600 °C) in S, Se, or S + Se (mixed) atmospheres are used to understand the thermodynamics of chalcogenide incorporation reaction. Phase-pure CZTSe and CZTS were obtained after annealing at 500 degrees C for 1 min in Se (selenization) and 600 degrees C for 10 min in S (sulfurization) atmospheres, respectively. CZTSSe solid solutions are synthesized by the sequential annealing of metal precursors in S and Se atmosphere separately or in the mixed (S + Se) atmosphere. In the S-rich mixed atmosphere, S-rich CZTSSe solid solution is formed at all annealing conditions. Surprisingly, in a Se-rich mixed atmosphere, longer annealing at 600 degrees C yields S-rich CZTSSe. The CZTSSe film formed by annealing in near equimolar S/Se atmosphere exhibits a compositional gradient across the thickness. Furthermore, these results suggest that the crystallinity, composition, and hence the bandgap of CZTSSe can be precisely controlled by the proper choice of annealing temperature, duration, and atmosphere.

14 SOLAR ENERGY↗
DOE OSTI2013

Optical Absorption and Band Gap Reduction in (Fe 1– x Cr x ) 2 O 3 Solid Solutions: A First-Principles Study

We provide a detailed theoretical analysis of the character of optical transitions and band gap reduction in (Fe1-xCrx)2O3 solid solutions using extensive periodic model and embedded cluster calculations. Optical absorption bands for x = 0.0, 0.5, and 1.0 are assigned on the basis of timedependent density functional theory (TDDFT) calculations. A band-gap reduction of as much as 0.7 eV with respect to that of pure α-Fe2O3 is found. This result can be attributed to predominantly two effects: (i) the higher valence band edge for x ≈ 0.5, as compared to those in pure α-Fe2O3 and α-Cr2O3, and, (ii) the appearance of Cr α Fe d–d transitions in the solid solutions. Broadening of the valence band due to hybridization of the O 2p states with Fe and Cr 3d states also contributes to band gap reduction.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Complex Studies of the Kinetics of Induced Phase Transition in [001], [011], and [111]-Oriented Single Crystal Relaxor Solid Solutions

The kinetics of an induced phase transition in single-crystal relaxor solid solutions 33PbIn{sub 1/2}Nb{sub 1/2}O{sub 3}–35PbMg{sub 1/3}Nb{sub 2/3}O{sub 3}–32PbTiO{sub 3} and PbMg{sub 1/3}Nb{sub 2/3}O{sub 3}–29PbTiO{sub 3} under application of an electric field along three directions [001], [011], and [111] at room temperature is studied. Joint measurements of optical transmission at different wavelengths, dielectric properties, and attenuation of sound are carried out. It was found that, even in small fields (E ~ 2 kV/cm) applied in the [011] and [111] directions, the maximum changes in all three characteristics as well as the coincidence of the time dependences of the optical transmission at different wavelengths of light occur in the same time interval. It is established that, in the same interval of fields along the [001] direction, the anomalies of the optical properties do not coincide in time with the anomalies of the acoustic and dielectric properties. The results obtained are explained by the induction of single-domain and multidomain phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Crystal Chemistry and Thermodynamics of HREE (Er, Yb) Mixing in a Xenotime Solid Solution

Rare earth elements (REEs), the 15 naturally occurring lanthanides plus yttrium and scandium, are ubiquitously used in modern life as they are critical components of many advanced devices and technologies. However, the demand for REEs is not equal, with the heavy rare earth elements (HREEs) having a higher demand. Xenotime (HREEPO 4 ) is an important HREE ore mineral and globally is an economical source of HREE. Most of the crystallographic and thermodynamic properties of xenotime endmembers have been elucidated by calorimetric, solubility, and high-pressure studies. Yet, in natural systems, endmembers are rarely encountered, and instead, REE solid solutions are more commonly observed. Here, we characterize the crystal chemistry, thermodynamics of HREE mixing, and high-temperature material behaviors and thermochemistry of a synthetic erbium (Er)-ytterbium (Yb) binary xenotime solid solution (Er (x) Yb (1-x) PO 4 ) using a suite of experimental techniques, including X-ray fluorescence spectroscopy, synchrotron X-ray powder diffraction implemented with Rietveld analysis, Fourier transform infrared spectroscopy coupled with attenuated total reflectance, Raman spectroscopy, thermogravimetric analysis coupled with differential scanning calorimetry, and high-temperature oxide melt drop solution calorimetry. Our results shed light on the formation of natural xenotimes and lay the foundation for their industrial applications as thermal coating materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Solid solution barium–strontium chlorides with tunable ammonia desorption properties and superior storage capacity

Metal halide ammines are very attractive materials for ammonia absorption and storage—applications where the practically accessible or usable gravimetric and volumetric storage densities are of critical importance. Here we present, that by combining advanced computational materials prediction with spray drying and in situ thermogravimetric and structural characterization, we synthesize a range of new, stable barium-strontium chloride solid solutions with superior ammonia storage densities. By tuning the barium/strontium ratio, different crystallographic phases and compositions can be obtained with different ammonia ab- and desorption properties. In particular it is shown, that in the molar range of 35–50% barium and 65–50% strontium, stable materials can be produced with a practically usable ammonia density (both volumetric and gravimetric) that is higher than any of the pure metal halides, and with a practically accessible volumetric ammonia densities in excess of 99% of liquid ammonia. - Graphical abstract: Thermal desorption curves of ammonia from Ba{sub x}Sr{sub (1−x)}Cl{sub 2} mixtures with x equal to 0.125, 0.25 and 0.5 and atomic structure of Sr(NH{sub 3}){sub 8}Cl{sub 2}. - Highlights: • Solid solutions of strontium and barium chloride were synthesized by spray drying. • Adjusting molar ratios led to different crystallographic phases and compositions. • Different molar ratios led to different ammonia ab-/desorption properties. • 35–50 mol% BaCl{sub 2} in SrCl{sub 2} yields higher ammonia density than any other metal halide. • DFT calculations can be used to predict properties of the mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Preparation and Some Properties of N-Type IrxCo1-xSB3 Solid Solutions

A number of studies have been recently devoted to the preparation and characterization of binary skutterudite materials to investigate their potential as advanced thermoelectric materials. These studies show that the potential of these binary skutterudite compounds is limited because of their relatively large thermal conductivity. In order to achieve high thermoelectric figure of merits for these materials, efforts should focus on thermal conductivity reduction. Recent results obtained on n-type CoSb3 and IrSb3 compounds have shown that n-type skutterudite materials might have a better potential for thermoelectric applications than p-type materials. The thermoelectric properties of p-type IrxCo1-xSb3 solid solutions have been recently investigated and it was shown that a substantial reduction in thermal conductivity was achieved. We prepared and measured some properties of n-type IrxCo1-xSb3 solid solutions. The samples are characterized by large Seebeck coefficient values and significantly lower thermal conductivity values than those measured on the binary compounds CoSb3 and IrSb3. A maximum ZT value of about 0.4 was obtained at a temperature of about 300(deg)C. Improvements in the figure of merit are possible in this system by optimization of the doping level.

Solid Solutions↗
DOE OSTI2015

Microstructural features of the La{sub 1−x}Ca{sub x}FeO{sub 3−δ} solid solutions prepared via Pechini route

Highlights: • La{sub 1−x}Ca{sub x}FeO {sub (3−δ)} (0 ≤ x ≤ 0.7) perovskite were prepared by Pechini method. • Planar defects in direction (1 0 1) were observed in the perovskite surface. • α-Fe{sub 2}O{sub 3} particles (1–10 nm) on the surface of perovskite were revealed. • Amount of α-Fe{sub 2}O{sub 3} particles on the perovskite surface grew with rising x values. - Abstract: Solid solutions with La{sub 1−x}Ca{sub x}FeO{sub 3−δ} (0 ≤ x ≤ 0.7) perovskite-like structure prepared via Pechini route have been investigated by using high resolution transmission electron microscopy and X-ray diffraction. Extended planar defects lying in (1 0 1) crystallographic planes and α-Fe{sub 2}O{sub 3} nanoparticles on the surface of perovskite microcrystals are characteristic of the samples under investigation. It was found that testing of the samples in catalytic deep CH{sub 4} oxidation process results in partial destruction of solid solutions with formation of planar defects in the bulk and α-Fe{sub 2}O{sub 3} particles on the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Monophasic zircon-type tetragonal Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution: synthesis, characterization, and optical properties

Highlights: • Complete Eu{sub 1−x}Bi{sub x}VO{sub 4} with zircon-type structure was successfully synthesized. • The band gap of the samples could be adjusted and controlled by bismuth content. • Eu{sub 1−x}Bi{sub x}VO{sub 4} show strong red emission under both near UV and visible-light excitation. - Abstract: By combining the methods of co-precipitation and hydrothermal synthesis methods, the complete solid-solution of Eu{sub 1−x}Bi{sub x}VO{sub 4} with monophasic zircon-type structure was successfully synthesized. The zircon-type structure was determined by X-ray diffractometer and Raman scattering, and the optical properties were characterized by ultraviolet-visible diffuse reflectance and photoluminescence spectrophotometer. The results indicate that the band gap of Eu{sub 1−x}Bi{sub x}VO{sub 4} could be adjusted and controlled by bismuth content in the range of x = 0–0.9. Meanwhile, the Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution phosphors show strong red light emission was shown in 619 nm under both near UV-light and visible-light excitation. Notably, the emission intensity of Eu{sub 1−x}Bi{sub x}VO{sub 4} (x = 0.4) is the strongest in all samples.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Energetics of a uranothorite (Th 1– x U x SiO 4 ) solid solution

High-temperature oxide melt solution calorimetric measurements were completed to determine the enthalpies of formation of the uranothorite, (USiO 4 ) x –(ThSiO 4 ) 1–x , solid solution. Phase-pure samples with x values of 0, 0.11, 0.21, 0.35, 0.71, and 0.84 were prepared, purified, and characterized by powder X-ray diffraction, electron probe microanalysis, thermogravimetric analysis and differential scanning calorimetry coupled with in situ mass spectrometry, and high-temperature oxide melt solution calorimetry. This work confirms the energetic metastability of coffinite, USiO 4 , and U-rich intermediate silicate phases with respect to a mixture of binary oxides. Furthermore, variations in unit cell parameters and negative excess volumes of mixing, coupled with strongly exothermic enthalpies of mixing in the solid solution, suggest short-range cation ordering that can stabilize intermediate compositions, especially near x = 0.5.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Giant magnetic coercivity in CaCu{sub 5}-type SmNi{sub 3}TSi (T=Mn–Cu) solid solutions

The effects of transition metal substitution for Ni on the magnetic properties of the CaCu{sub 5}-type SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) solid solutions have been investigated. SmNi{sub 3}MnSi, SmNi{sub 3}FeSi, SmNi{sub 3}CoSi and SmNi{sub 3}CuSi show ferromagnetic ordering at 125 K, 190 K, 46 K and 12 K and field induced transitions at 65 K, 110 K, 30 K and 6 K, respectively. The magnetocaloric effects of SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) were calculated in terms of isothermal magnetic entropy change (ΔS{sub m}). The magnetic entropy ΔS{sub m} reaches value of −1.1 J/kg K at 130 K for SmNi{sub 3}MnSi, −0.4 J/kg K at 180 K for SmNi{sub 3}FeSi, −0.37 J/kg K at 45 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 12 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the ferromagnetic ordering temperature. They show positive ΔS{sub m} of +2.4 J/kg K at 30 K for SmNi{sub 3}MnSi, −2.6 J/kg K at 65 K for SmNi{sub 3}FeSi, +0.73 J/kg K at 15 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 6 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the metamagnetic-like transition temperature. Below the field induced transition temperature, SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) exhibits giant magnetic coercivity of 80 kOe at 20 K for SmNi{sub 3}MnSi, 87 kOe at 40 K for SmNi{sub 3}FeSi, 27 kOe at 20 K for SmNi{sub 3}CoSi and 54 kOe at 5 K for SmNi{sub 3}CuSi. - Graphical abstract: CaCu{sub 5}-type SmNi{sub 3}MnSi, SmNi{sub 3}FeSi, SmNi{sub 3}CoSi and SmNi{sub 3}CuSi show ferromagnetic ordering at 125 K, 190 K, 46 K and 12 K and field induced transitions at 65 K, 110 K, 30 K and 6 K, respectively. The magnetic entropy ΔS{sub m} reaches value of −1.1 J/kg K at 130 K for SmNi{sub 3}MnSi, −0.4 J/kg K at 180 K for SmNi{sub 3}FeSi, −0.37 J/kg K at 45 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 12 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the ferromagnetic ordering temperature. They show positive ΔS{sub m} of +2.4 J/kg K at 30 K for SmNi{sub 3}MnSi, −2.6 J/kg K at 65 K for SmNi{sub 3}FeSi, +0.73 J/kg K at 15 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 6 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the metamagnetic-like transition temperature. Below the field induced transition temperature, SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) exhibits giant magnetic coercivity of 80 kOe at 20 K for SmNi{sub 3}MnSi, 87 kOe at 40 K for SmNi{sub 3}FeSi, 27 kOe at 20 K for SmNi{sub 3}CoSi and 54 kOe at 5 K for SmNi{sub 3}CuSi. - Highlights: • CaCu{sub 5}-type SmNi{sub 3}{Mn, Fe, Co, Cu}Si exhibit the Curie points at 12–190 K. • SmNi{sub 3}{Mn, Fe, Co, Cu}Si show field induced transition at 6–110 K. • SmNi{sub 3}MnSi shows huge magnetic hysteresis with coercive field of 80 kOe at 20 K. • SmNi{sub 3}FeSi shows huge magnetic hysteresis with coercive field of 87 kOe at 40 K. • SmNi{sub 3}CuSi shows giant coercive field of 54 kOe at 5 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Single-Phase Concentrated Solid-Solution Alloys: Bridging Intrinsic Transport Properties and Irradiation Resistance

Single-phase concentrated solid-solution alloys (SP-CSAs), including high entropy alloys (HEAs), are compositionally complex but structurally simple, and provide a playground of tailoring material properties through modifying their compositional complexity. The recent progress in understanding the compositional effects on the energy and mass transport properties in a series of face-centered-cubic SP-CSAs is the focus of this review. Relatively low electrical and thermal conductivities, as well as small separations between the interstitial and vacancy migration barriers have been generally observed, but largely depend on the alloying constituents. We further discuss the impact of such intrinsic transport properties on their irradiation response; the linkage to the delayed damage accumulation, slow defect aggregation, and suppressed irradiation induced swelling and segregation has been presented. We emphasize that the number of alloying elements may not be a critical factor on both transport properties and the defect behaviors under ion irradiations. Furthermore, the recent findings have stimulated novel concepts in the design of new radiation-tolerant materials, but further studies are demanded to enable predictive models that can quantitatively bridge the transport properties to the radiation damage.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Nanostructured gadolinium-doped ceria microsphere synthesis from ion exchange resin: Multi-scale in-situ studies of solid solution formation

In the current nano-sized material revolution, the main limitations to a large-scale deployment of nanomaterials involve health concerns related to nano-dissemination via air. Developing new chemical routes benefiting from nano-size advantages while avoiding their hazards could overcome these limitations. Addressing this need, a chemical route leading to soft nano-particle agglomerates, i.e., macroscopic precursors presenting the ability to be decomposed into nano-sized materials, was developed and applied to Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ}. Using cerium/gadolinium-loaded ion exchange resin, the Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ} solid solution formation as a function of temperature was studied in-situ through X-ray diffraction, X-ray absorption spectroscopy and Raman spectroscopy. Temperatures corresponding to the organic skeleton decomposition and to the mixed oxide crystallization were identified. An optimal heat treatment, leading to nanostructured soft agglomerates, was established. Microsphere processing capabilities were evaluated and particle size distribution measurements were recorded. A very low fracture strength was calculated, and a nanometric particle size distribution (170 nm) was determined. - Graphical abstract: The elaboration of micro-spherical precursors leading to the formation of nano-oxide soft agglomerates was studied and approved through the use of ion exchange resin loaded with cerium and gadolinium. The formation of the solid solution was followed through in-situ measurements such as XAS, XRD, Raman, TGA and DSC. Key temperatures were identified for the formation of the mixed-oxide. Following this study, the microstructure and particle size of oxide microspheres formed highlight the formation of soft nano-arrangments. - Highlights: • Soft microspherical agglomerates able to be decomposed into nano-sized materials. • In situ study of cerium/gadolinium-loaded ion exchange resin conversion in oxide. • In situ multi-scale study through Raman spectroscopy, XAS and HT-XRD. • Monodisperse nanometric particle synthesis suitable for ceramic processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Luminescence Properties of Eu{sup 3+}-Doped K{sub 1–} {sub x}Mg{sub 1–} {sub x}Sc(Lu){sub 1+} {sub x}(MoO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) Solid Solutions

K{sub 1–x}Mg{sub 1–} {sub x}Sc(Lu){sub 1+} {sub x}(MoO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) solid solutions have been prepared by solid-state reactions. The synthesized phases of variable composition have been characterized by X-ray diffraction and differential thermal analysis, and their luminescence excitation and luminescence spectra have been obtained. We have measured their spectroscopic and luminescent characteristics (luminescence excitation spectra, short- and long-lived photoluminescence spectra, and long-lived emission lifetime).

36 MATERIALS SCIENCE↗