Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “significant quantity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Minimum Energy Requirements for Sustained Microbial Activity in Anoxic Sediments

Currently understood mechanisms of biochemical energy conservation dictate that, in order to be biologically useful, energy must be available to organisms in "quanta" equal to, at minimum one-third to one-fifth of the energy required to synthesize ATP in vivo. The existence of this biological energy quantum means that a significant fraction of the chemical amp on Earth cannot be used to drive biological productivity, and places a fundamental thermodynamic constraint on the origins, evolution, and distribution of life. We examined the energy requirements of intact microbial assemblages in anoxic sediments from Cape Lookout Bight, NC, USA, using dissolved hydrogen concentrations as a non-invasive probe. In this system, the thermodynamics of metabolic processes occurring inside microbial cells is reflected quantitatively by H2 concentrations measured outside those cells. We find that methanogenic archaea are supported by energy yields as small as 10 kJ per mol, about half the quantity calculated from studies of microorganisms in culture. This finding implies that a significantly broader range of geologic and chemical niches might be exploited by microorganisms than would otherwise be expected.

Hoehler, Tori M.↗

Study of Boundary Layer Development in a Two-Stage Low-Pressure Turbine

Experimental data from jet-engine tests have indicated that unsteady blade row interactions and separation can have a significant impact on the efficiency of low-pressure turbine stages. Measured turbine efficiencies at takeoff can be as much as two points higher than those at cruise conditions. Several recent studies have revealed that Reynolds number effects may contribute to the lower efficiencies at cruise conditions. In the current study numerical simulations have been performed to study the boundary layer development in a two-stage low-pressure turbine, and to evaluate the transition models available for low Reynolds number flows in turbomachinery. The results of the simulations have been compared with experimental data, including airfoil loadings and integral boundary layer quantities. The predicted unsteady results display similar trends to the experimental data, but significantly overestimate the amplitude of the unsteadiness. The time-averaged results show close agreement with the experimental data.

Dorney, Daniel J.↗

Remote sensing for oceanography: Past, present, future

Oceanic dynamics was traditionally investigated by sampling from instruments in situ, yielding quantitative measurements that are intermittent in both space and time; the ocean is undersampled. The need to obtain proper sampling of the averaged quantities treated in analytical and numerical models is at present the most significant limitation on advances in physical oceanography. Within the past decade, many electromagnetic techniques for the study of the Earth and planets were applied to the study of the ocean. Now satellites promise nearly total coverage of the world's oceans using only a few days to a few weeks of observations. Both a review of the early and present techniques applied to satellite oceanography and a description of some future systems to be launched into orbit during the remainder of this century are presented. Both scientific and technologic capabilities are discussed.

Mcgoldrick, L. F.↗

A correction for the errors in ship reports of light winds

The errors in ship wind reports of light wings tend to significantly bias their mean. This occurs because wind speed is a scalar quantity that is constrained to zero or positive values. Therefore, observations tend to overestimate the light winds because of the one-sided distribution of errors, but the bias disappears under stronger winds. A method for removing this bias from ship data is presented. In particular, the method is applied to interpreting the ratios of wind speeds observed by ships to those obtained from tracking low level clouds. Corrected ratios allow low cloud speeds to serve as proxy data for surface based observations.

Hinton, B. B.↗

Noise propagation from a four-engine, propeller-driven airplane

A flight experiment was conducted to investigate the propagation of periodic low-frequency noise from a propeller-driven airplane. The test airplane was a large four-engine, propeller-driven airplane flown at altitudes from 15 to 500 m over the end of an 1800-m-long, 22-element microphone array. The acoustic data were reduced by a one-third octave-band analysis. The primary propagation quantities computed were lateral attenuation and ground effects, both of which become significant at shallow elevation angles. Scatter in the measured results largely obscured the physics of the low-frequency noise propagation. Variability of the noise source, up to 9.5 dB over a 2-sec interval, was the major contributor to the data scatter. The microphones mounted at ground level produced more consistent results with less scatter than those mounted 1.2 m above ground. The ground noise levels were found to be greater on the port side than on the starboard side.

Willshire, William L., Jr.↗

A design for a ground-based data management system

An initial design for a ground-based data management system which includes intelligent data abstraction and cataloging is described. The large quantity of data on some current and future NASA missions leads to significant problems in providing scientists with quick access to relevant data. Human screening of data for potential relevance to a particular study is time-consuming and costly. Intelligent databases can provide automatic screening when given relevent scientific parameters and constraints. The data management system would provide, at a minimum, information of availability of the range of data, the type available, specific time periods covered together with data quality information, and related sources of data. The system would inform the user about the primary types of screening, analysis, and methods of presentation available to the user. The system would then aid the user with performing the desired tasks, in such a way that the user need only specify the scientific parameters and objectives, and not worry about specific details for running a particular program. The design contains modules for data abstraction, catalog plan abstraction, a user-friendly interface, and expert systems for data handling, data evaluation, and application analysis. The emphasis is on developing general facilities for data representation, description, analysis, and presentation that will be easily used by scientists directly, thus bypassing the knowledge acquisition bottleneck. Expert system technology is used for many different aspects of the data management system, including the direct user interface, the interface to the data analysis routines, and the analysis of instrument status.

Lambird, Barbara A.↗

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of enabling manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated SPEs on imbibed seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated SPEs (0, 40, 80 cGy, and 200 cGy), either acutely or at a low dose rate (LDR only for 40 and 80 cGy doses), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Simulated SPE exposure was achieved using sequential exposures to protons with a broad energy range at 50-150 MeV/n. Control and irradiated seeds were planted either onto 0.5% MS-based agar plates containing required nutrients for early seedling analysis, or in peat plugs/pots for 28 day (mizuna and lettuce) and 91 day (tomato) grow outs. All plants were maintained under space-vehicle relevant conditions at 3000 ppm CO2, 50% RH, and 23°C, and a 16/8 h photoperiod with 300 μmol·m(exp -2)·s(exp -1) photosynthetically active radiation. Plant/fruit morphometrics and edible fresh mass were measured. Additionally, nutrient analyses were performed on mizuna and tomato fruit. Seedlings from irradiated seeds (both 40 and 80 cGy) showed significant and dose dependent impacts on cotyledon development and root length. Interestingly, small, but significant changes in vitamin content were found in mizuna and tomato fruits grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated SPEs significantly delayed tomato early seedling development and plant growth, and reduced the quantity of fruits produced from the surviving plants. (This study was supported by NASA Human Research Program.)

J. T. Richards↗

Features of a reattaching turbulent shear layer subject to an adverse pressure gradient

Experimental data have been obtained in an incompressible turbulent flow over a rearward-facing step with superimposed adverse pressure gradient. Mean velocities, Reynolds stresses and triple-products measured by a laser Doppler velocimeter are presented for two cases of adverse pressure gradient. Mixing lengths, eddy viscosities, production, convection, turbulent diffusion, and dissipation terms are extracted from the data. These data are compared with various mixing length and eddy-viscosity turbulence models. Numerical calculations incorporating the k-epsilon and the algebraic-stress turbulence models are compared with the data. When determining quantities of engineering interest, the modified algebraic-stress model (ASM) is a significant improvement over the unmodified ASM and the unmodified k-epsilon model

Driver, D. M.↗

Features of a reattaching turbulent shear layer in divergent channel flow

Experimental data have been obtained in an incompressible turbulent flow over a rearward-facing step in a diverging channel flow. Mean velocities, Reynolds stresses, and triple products that were measured by a laser Doppler velocimeter are presented for two cases of tunnel wall divergence. Eddy viscosities, production, convection, turbulent diffusion, and dissipation (balance of kinetic energy equation) terms are extracted from the data. These data are compared with various eddy-viscosity turbulence models. Numerical calculations incorporating the k-epsilon and algebraic-stress turbulence models are compared with the data. When determining quantities of engineering interest, the modified algebraic-stress model (ASM) is a significant improvement over the unmodified ASM and the unmodified k-epsilon model; however, like the others, it dramatically overpredicts the experimentally determined dissipation rate.

Driver, D. M.↗

Direct simulation of a turbulent boundary layer up to R(sub)(theta)= 1410

The turbulent boundary layer on a flat plate, with zero pressure gradient, is simulated numerically at four stations between R sub theta = 225 and R sub theta = 1410. The three-dimensional time-dependent Navier-Stokes equations are solved using a spectra method with up to about 10 to the 7th power grid points. Periodic spanwise and stream-wise conditions are applied, and a multiple-scale procedure is applied to approximate the slow streamwise growth of the boundary layer. The flow is studied, primarily, from a statistical point of view. The solutions are compared with experimental results. The scaling of the mean and turbulent quantities with Reynolds number is examined and compared with accepted laws, and the significant deviations are documented. The turbulence at the highest Reynolds number is studied in detail. The spectra are compared with various theoretical models. Reynolds-stress budget data are provided for turbulence-model testing.

Spalart, Philippe R.↗

Evolutionary implications of a steady-state water abundance on Venus

In 1987, Grinspoon proposed that the data on hydrogen abundance, isotopic composition, and escape rate were consistent with the hypothesis that water on Venus might be in steady-state rather than monotonic decline since the dawn of time. This conclusion was partially based on a derived water lifetime against nonthermal escape of approximately 10(exp 8) years. Others have questioned this conclusion. De Bergh et al. found H2O lifetimes of greater than 10(exp 9) years. Donahue and Hodges derived H2O lifetimes of 0.4 - 5 x 10(exp 9) years. The most sophisticated analysis to date of near-IR radiation from Venus' nightside reveals a water mixing ratio of approximately 30 ppm. Recent re-analysis of Pioneer Venus Mass Spectrometer Data are consistent with a water abundance of 30 ppm. Hodges and Tinsley found an escape flux due to charge exchange with hot H(+) of 2.8 x 10(exp 7) cm(exp -2) s(exp -1). Gurwell and Yung estimated an escape flux of 3.5 x 10(exp 6) cm(exp -2) s(exp -1) from collisions with hot O produced by dissociative recombination of O2(+). Brace et al. estimated an escape flux of 5 x 10(exp 6) cm(exp -2) s(exp -1) from ion escape from the ionotail of Venus. The combined estimated escape flux from all of these processes is 3.7 x 10(exp 7) cm(exp -2) s(exp -1), suggesting a lifetime against escape for water of less than 10(exp 8) years. A recent estimate of H escape flux employing a different ionospheric model and using Pioneer Venus reentry data to estimate the response of the escape flux to the solar cycle finds a somewhat lower escape flux of 1.4 x 10(exp 7) cm(exp -2) s(exp -1), suggesting a water lifetime closer to 2 x 10(exp 8) years, significantly less than the age of the planet. Large uncertainties remain in these quantities, yet the data suggest that a source of water more recent than primordial sources is required and that a steady-state is likely. To obvious candidates for this source water are cometary impact and volcanic outgassing. Other aspects of this investigation are discussed.

Grinspoon, David H.↗

A History of Suction-Type Laminar Flow Control with Emphasis on Flight Research

Laminar-flow control is an area of aeronautical research that has a long history at NASA's Langley Research Center, Dryden Flight Research Center, their predecessor organizations, and elsewhere. In this monograph, the author, who spent much of his career at Langley working with this research, presents a history of that portion of laminar-flow technology known as active laminar-flow control, which employs suction of a small quantity of air through airplane surfaces. This important technique offers the potential for significant reduction in drag and, thereby, for large increases in range or reductions in fuel usage for aircraft. For transport aircraft, the reductions in fuel consumed as a result of laminar-flow control may equal 30 percent of present consumption. Given such potential, it is obvious that active laminar-flow control with suction is an important technology. In this study, the author covers the early history of the subject and brings the story all the way to the mid-1990s with an emphasis on flight research, much of which has occurred at Dryden. This is an important monograph that not only encapsulates a lot of history in a brief compass but also does so in language that is accessible to non-technical readers. NASA is publishing it in a format that will enable it to reach the wide audience the subject deserves.

Braslow, Albert L.↗

Comparison of Prediction Modeling Methodologies for Aeroacoustic Characterization of Hovering sUAS Rotors

This work compared artificial neural network and multivariate orthogonal function modeling methodologies for the prediction and characterization of isolated hovering sUAS rotor aerodynamics and aeroacoustics. Design of Experiments was used to create input feature spaces over 9 input features: the number of rotor blades, rotor size, rotor speed, the amount of blade twist, blade taper ratio, tip chord length, collective pitch, airfoil camber, and airfoil thickness. CAMRAD~II and AARON were executed at the points defined by the input feature space to predict aerodynamic and aeroacoustic quantities. These predicted aerodynamic and aeroacoustic data were then used to generate artificial neural networks and polynomial response surface models. The two prediction model methodologies were evaluated over test data previously unseen by the models, which showed good prediction capabilities for both model types, with slightly lower prediction error for the artificial neural networks. A characterization study was performed, which showed that input features correspondent to the spanwise sectional blade lift and drag were the most significant factors to the aerodynamic thrust and power, respectively. It was also shown that the aeroacoustic quantities were highly dependent on variations in rotor speed and size, which affect the Doppler factor for tonal noise and the spanwise Reynolds number for broadband noise.

Christopher S Thurman↗

Modelling of Spherical Gas Bubble Oscillations and Sonoluminescence

The discovery of single-bubble sonoluminescence has led to a renewed interest in the forced radial oscillations of gas bubbles. Many of the more recent studies devoted to this topic have used several simplifications in the modelling, and in particular in accounting for liquid compressibility and thermal processes in the bubble. In this paper the significance of these simplifications is explored by contrasting the results of Lohse and co-workers with those of a more detailed model. It is found that, even though there may be little apparent difference between the radius-versus time behaviour of the bubble as predicted by the two models, quantities such as the spherical stability boundary and the threshold for rectified diffusion are affected in a quantitatively significant way. These effects are a manifestation of the subtle dependence upon dissipative processes of the phase of radial motion with respect to the driving sound field. The parameter space region, where according to the theory of Lohse and co-workers, sonoluminescence should be observable, is recalculated with the new model and is found to be enlarged with respect to the earlier estimate. The dependence of this parameter region on sound frequency is also illustrated.

Prosperetti, A.↗

Contributions of the low-latitude boundary layer to the finite width magnetotail convection model

Convection of plasma within the terrestrial nightside plasma sheet contributes to the structure and, possibly, the dynamical evolution of the magnetotail. In order to characterize the steady state convection process, we have extended the finite tail width model of magnetotail plasma sheet convection. The model assumes uniform plasma sources and accounts for both the duskward gradient/curvature drift and the earthward E x B drift of ions in a two-dimensional magnetic geometry. During periods of slow convection (i.e., when the cross-tail electric potential energy is small relative to the source plasma's thermal energy), there is a significant net duskward displacement of the pressure-bearing ions. The electrons are assumed to be cold, and we argue that this assumption is appropriate for plasma sheet parameters. We generalize solutions previously obtained along the midnight meridian to describe the variation of the plasma pressure and number density across the width of the tail. For a uniform deep-tail source of particles, the plasma pressure and number density are unrealistically low along the near-tail dawn flank. We therefore add a secondary source of plasma originating from the dawnside low-latitude boundary layer (LLBL). The dual plasma sources contribute to the plasma pressure and number density throughout the magnetic equatorial plane. Model results indicate that the LLBL may be a significant source of near-tail central plasma sheet plasma during periods of weak convection. The model predicts a cross-tail pressure gradient from dawn to dusk in the near magnetotail. We suggest that the plasma pressure gradient is balanced in part by an oppositely directed magnetic pressure gradient for which there is observational evidence. Finally, the pressure to number density ratio is used to define the plasma 'temperature.' We stress that such quantities as temperature and polytropic index must be interpreted with care as they lose their nominal physical significance in regions where the two-source plasmas intermix appreciably and the distributions become non-Maxwellian.

Spence, H. E.↗

Implementation of generalized optimality criteria in a multidisciplinary environment

A generalized optimality criterion method consisting of a dual problem solver combined with a compound scaling algorithm was implemented in the multidisciplinary design tool, ASTROS. This method enables, for the first time in a production design tool, the determination of a minimum weight design using thousands of independent structural design variables while simultaneously considering constraints on response quantities in several disciplines. Even for moderately large examples, the computational efficiency is improved significantly relative to the conventional approach.

Canfield, R. A.↗

Unstable transition properties of the driven magnetohydrodynamic sheet pinch

The unstable transition behavior of a bounded current-carrying two-dimensional magnetofluid is explored, using the hydrodynamic theory developed for parallel shear flows as a guide. Nonlinear excitation of the higher wavenumbers results in the development of electric current sheets of finite extent, as well as the formation of 'attraction currents' centered at the magnetic O-points. A secondary instability mechanism, the dynamic tearing of the electric current sheet, is also observed. This dynamic tearing leads to sawtoothlike temporal oscillations in certain global quantities. The long-time state of the system resembles a nonlinearly saturated state with significant excitation of many wavenumbers. Some features of this state can be understood by means of a Landau nonlinear stability theory based on certain assumptions about the perturbation energy balance.

Dahlburg, R. B.↗

Polyimide based amorphous silicon solar modules

Requirements for space power are increasingly emphasizing lower costs and higher specific powers. This results from new fiscal constraints, higher power requirements for larger applications, and the evolution toward longer distance missions such as a Lunar or Mars base. The polyimide based a-Si modules described are being developed to meet these needs. The modules consist of tandem a-Si solar cell material deposited directly on a roll of polyimide. A laser scribing/printing process subdivides the deposition into discrete cell strips which are series connected to produce the required voltage without cutting the polymer backing. The result is a large, monolithic, blanket type module approximately 30 cm wide and variable in length depending on demand. Current production modules have a specific power slightly over 500 W/Kg with room for significant improvement. Costs for the full blanket modules range from $30/Watt to $150/Watt depending on quantity and engineering requirements. Work to date focused on the modules themselves and adjusting them for the AMO spectrum. Work is needed yet to insure that the modules are suitable for the space environment.

Jeffrey, Frank R.↗