Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Megahertz-rate shock-wave distortion cancellation via phase conjugate digital in-line holography

Abstract Holography is a powerful tool for three-dimensional imaging. However, in explosive, supersonic, hypersonic, cavitating, or ionizing environments, shock-waves and density gradients impart phase distortions that obscure objects in the field-of-view. Capturing time-resolved information in these environments also requires ultra-high-speed acquisition. To reduce phase distortions and increase imaging rates, we introduce an ultra-high-speed phase conjugate digital in-line holography (PCDIH) technique. In this concept, a coherent beam passes through the shock-wave distortion, reflects off a phase conjugate mirror, and propagates back through the shock-wave, thereby minimizing imaging distortions from phase delays. By implementing the method using a pulse-burst laser setup at up to 5 million-frames-per-second, time-resolved holograms of ultra-fast events are now possible. This technique is applied for holographic imaging through laser-spark plasma-generated shock-waves and to enable three-dimensional tracking of explosively generated hypersonic fragments. Simulations further advance our understanding of physical processes and experiments demonstrate ultra-high-speed PCDIH techniques for capturing dynamics.

Science & Technology - Other Topics↗
DOE OSTI2014

Tracking the CME-driven shock wave on 2012 March 5 and radio triangulation of associated radio emission

We present a multiwavelength study of the 2012 March 5 solar eruptive event, with an emphasis on the radio triangulation of the associated radio bursts. The main points of the study are reconstruction of the propagation of shock waves driven by coronal mass ejections (CMEs) using radio observations and finding the relative positions of the CME, the CME-driven shock wave, and its radio signatures. For the first time, radio triangulation is applied to different types of radio bursts in the same event and performed in a detailed way using goniopolarimetric observations from STEREO/Waves and WIND/Waves spacecraft. The event on 2012 March 5 was associated with a X1.1 flare from the NOAA AR 1429 situated near the northeast limb, accompanied by a full halo CME and a radio event comprising long-lasting interplanetary type II radio bursts. The results of the three-dimensional reconstruction of the CME (using SOHO/LASCO, STEREO COR, and HI observations), and modeling with the ENLIL cone model suggest that the CME-driven shock wave arrived at 1 AU at about 12:00 UT on March 7 (as observed by SOHO/CELIAS). The results of radio triangulation show that the source of the type II radio burst was situated on the southern flank of the CME. We suggest that the interaction of the shock wave and a nearby coronal streamer resulted in the interplanetary type II radio emission.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1999

Numerical Simulation of Low-Density Shock-Wave Interactions

Computational Fluid Dynamics (CFD) numerical simulations of low-density shock-wave interactions for an incident shock impinging on a cylinder have been performed. Flow-field density gradient and surface pressure and heating define the type of interference pattern and corresponding perturbations. The maximum pressure and heat transfer level and location for various interaction types (i.e., shock-wave incidence with respect to the cylinder) are presented. A time-accurate solution of the Type IV interference is employed to demonstrate the establishment and the steadiness of the low-density flow interaction.

Glass, Christopher E.↗
DOE OSTI2011

Nonplanar Shock Waves in Dusty Plasmas

Nonplanar (viz. cylindrical and spherical) electro-acoustic [dust-ion-acoustic (DIA) and dust-acoustic (DA)] shock waves have been investigated by employing the reductive perturbation method. The dust charge fluctuation (strong correlation among highly charged dust) is the source of dissipation, and is responsible for the formation of the DIA (DA) shock structures. The effects of cylindrical and spherical geometries on the time evolution of DIA and DA shock structures are examined and identified. The combined effects of vortex-like electron distribution and dust charge fluctuation (dust-correlation and effective dust-temperature) on the basic features of nonplanar DIA (DA) shock waves are pinpointed. The implications of our results in laboratory dusty plasma experiments are briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Shock wave bending around a dusty plasma void

We report on experimental observations of the bending of a dust acoustic shock wave around a dust void region. This phenomenon occurs as a planar shock wavefront encounters a compressible obstacle in the form of a void whose size is larger than the wavelength of the wave. As they collide, the central portion of the wavefront, that is the first to touch the void, is blocked while the rest of the front continues to propagate, resulting in an inward bending of the shock wave. The bent shock wave eventually collapses, leading to the transient trapping of dust particles in the void. Subsequently, a Coulomb explosion of the trapped particles generates a bow shock. The experiments have been carried out in a Direct Current (DC) glow discharge plasma, where the shock wave and the void are simultaneously created as self-excited modes of a three-dimensional dust cloud. The salient features of this phenomenon are reproduced in molecular dynamics simulations, which provide valuable insights into the underlying dynamics of this interaction.

Dust acoustic waves↗
DOE OSTI2016

Magnetosonic shock wave in collisional pair-ion plasma

Nonlinear propagation of magnetosonic shock wave has been studied in collisional magnetized pair-ion plasma. The masses of both ions are same but the temperatures are slightly different. Two fluid model has been taken to describe the model. Two different modes of the magnetosonic wave have been obtained. The dynamics of the nonlinear magnetosonic wave is governed by the Korteweg-de Vries Burgers' equation. It has been shown that the ion-ion collision is the source of dissipation that causes the Burgers' term which is responsible for the shock structures in equal mass pair-ion plasma. The numerical investigations reveal that the magnetosonic wave exhibits both oscillatory and monotonic shock structures depending on the strength of the dissipation. The nonlinear wave exhibited the oscillatory shock wave for strong magnetic field (weak dissipation) and monotonic shock wave for weak magnetic field (strong dissipation). The results have been discussed in the context of the fullerene pair-ion plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Heating and Nonequilibrium Distributions of Ions in a Reverse Shock Wave of the SN 1987A Remnant

A hydrodynamical description of supernova remnants is based on the approximation of locally equilibrium particle distributions. Shock waves in supernova remnants at various stages of ejecta propagation are collisionless and form nonequilibrium particle distributions that relax slowly to quasiequilibrium distributions within a time longer than the hydrodynamic time. A kinetic model of the heating of ions behind the front of a shock wave in the SN 1987A remnant is considered with allowance for a complex chemical composition of the ejecta, and nonequilibrium distributions of ions in the vicinity of this shock wave are calculated. In addition to the quasi-Maxwellian peak, which determines the effective temperature of a given charge state of an ion, nonequilibriumdistributions of ions contain, in some cases, a suprethermal component, which may describe to the injection of ions in the process of cosmic-ray acceleration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2012

Shock waves in a Z-pinch and the formation of high energy density plasma

A Z-pinch liner, imploding onto a target plasma, evolves in a step-wise manner, producing a stable, magneto-inertial, high-energy-density plasma compression. The typical configuration is a cylindrical, high-atomic-number liner imploding onto a low-atomic-number target. The parameters for a terawatt-class machine (e.g., Zebra at the University of Nevada, Reno, Nevada Terawatt Facility) have been simulated. The 2-1/2 D MHD code, MACH2, was used to study this configuration. The requirements are for an initial radius of a few mm for stable implosion; the material densities properly distributed, so that the target is effectively heated initially by shock heating and finally by adiabatic compression; and the liner's thickness adjusted to promote radial current transport and subsequent current amplification in the target. Since the shock velocity is smaller in the liner, than in the target, a stable-shock forms at the interface, allowing the central load to accelerate magnetically and inertially, producing a magneto-inertial implosion and high-energy density plasma. Comparing the implosion dynamics of a low-Z target with those of a high-Z target demonstrates the role of shock waves in terms of compression and heating. In the case of a high-Z target, the shock wave does not play a significant heating role. The shock waves carry current and transport the magnetic field, producing a high density on-axis, at relatively low temperature. Whereas, in the case of a low-Z target, the fast moving shock wave preheats the target during the initial implosion phase, and the later adiabatic compression further heats the target to very high energy density. As a result, the compression ratio required for heating the low-Z plasma to very high energy densities is greatly reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1974

Flight test measurements and analysis of sonic boom phenomena near the shock wave extremity

A NASA flight test program conducted during the summer and fall of 1970 was devoted to investigating sonic boom phenomena near caustics formed by steady flight near the threshold Mach number, during accelerations, and at the lateral extremes of the ground carpet. The vertical extent of the shock waves attached to near-sonic airplanes was also studied. The flights were conducted over the 1500 ft instrumented BREN tower so that vertical surveys through the shock waves were measured. These data on caustic phenomena near the shock wave extremity were analyzed in detail and compared with theoretical results. Amplifications of shock wave strength varied from 2 to 5 during longitudinal accelerations, from 1 to 1.8 during steady threshold Mach number flight, and up to 3 for small inadvertent accelerations during flight near the threshold Mach number.

Haglund, G. T.↗
DOE OSTI2015

Triggering collapse of the presolar dense cloud core and injecting short-lived radioisotopes with a shock wave. IV. effects of rotational axis orientation

Both astronomical observations of the interaction of Type II supernova remnants (SNRs) with dense interstellar clouds as well as cosmochemical studies of the abundances of daughter products of short-lived radioisotopes (SLRIs) formed by supernova nucleosynthesis support the hypothesis that the Solar System's SLRIs may have been derived from a supernova. This paper continues a series devoted to examining whether or not such a shock wave could have triggered the dynamical collapse of a dense, presolar cloud core and simultaneously injected sufficient abundances of SLRIs to explain the cosmochemical evidence. Here, we examine the effects of shock waves striking clouds whose spin axes are oriented perpendicular, rather than parallel, to the direction of propagation of the shock front. The models start with 2.2 M{sub ⊙} cloud cores and shock speeds of 20 or 40 km s{sup −1}. Central protostars and protoplanetary disks form in all models, although with their disk spin axes aligned somewhat randomly. The disks derive most of their angular momentum not from the initial cloud rotation, but from the Rayleigh-Taylor fingers that also inject shock wave SLRIs. Injection efficiencies, f{sub i}, the fraction of the incident shock wave material injected into the collapsing cloud core, are ∼0.04–0.1 in these models, similar to when the rotation axis is parallel to the shock propagation direction. Evidently, altering the rotation axis orientation has only a minor effect on the outcome, strengthening the case for this scenario as an explanation for the Solar System's SLRIs.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Radiative transfer effects on reflected shock waves. II - Absorbing gas.

Radiative cooling effects behind a reflected shock wave are calculated for an absorbing-emitting gas by means of an expansion procedure in the small density ratio across the shock front. For a gray gas shock layer with an optical thickness of order unity or less the absorption integral is simplified by use of the local temperature approximation, whereas for larger optical thicknesses a Rosseland diffusion type of solution is matched with the local temperature approximation solution. The calculations show that the shock wave will attenuate at first and then accelerate to a constant velocity. Under appropriate conditions the gas enthalpy near the wall may increase at intermediate times before ultimately decreasing to zero. A two-band absorption model yields end-wall radiant-heat fluxes which agree well with available shock-tube measurements.

Su, F. Y.↗
DOE OSTI2010

Shock wave initiated by an ion passing through liquid water

We investigate the shock wave produced by an energetic ion in liquid water. This wave is initiated by a rapid energy loss when the ion moves through the Bragg peak. The energy is transferred from the ion to secondary electrons, which then transfer it to the water molecules. The pressure in the overheated water increases by several orders of magnitude and drives a cylindrical shock wave on a nanometer scale. This wave eventually weakens as the front expands further; but before that, it may contribute to DNA damage due to large pressure gradients developed within a few nanometers from the ion's trajectory. This mechanism of DNA damage may be a very important contribution to the direct chemical effects of low-energy electrons and holes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

Ion acoustic shock waves in degenerate plasmas

Korteweg de Vries Burgers equation for negative ion degenerate dissipative plasma has been derived using reductive perturbation technique. The quantum hydrodynamic model is used to study the quantum ion acoustic shock waves. The effects of different parameters on quantum ion acoustic shock waves are studied. It is found that quantum parameter, electrons Fermi temperature, temperature of positive and negative ions, mass ratio of positive to negative ions, viscosity, and density ratio have significant impact on the shock wave structure in negative ion degenerate plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Analysis of Plasmadynamic Nanosecond-Range Processes in the Formation of Shock Waves from Pulsed Discharges

We have studied the dynamics of the plasma glow of pulsed discharges (sliding surface discharge and combined volume discharge with plasma electrodes) in the nanosecond range (100–12 000 ns) in stationary air and in the flow behind the front of a plane shock wave with Mach numbers 1.7–5.0 in the shock tube channel. The temporal characteristics of the flow, the radiation spectra, and the discharge currents in air are compared in the pressure range 5–150 Torr, a pulsed voltage of 20–30 kV, and a current of about 1 kA. It is shown that the time of current under various conditions does not exceed 400 ns, and the duration of the glow can reach a few microseconds. It is shown that as a result of energy supply near the planar shock wave front, the decay of discontinuities occurs with the formation of shock waves and contact surfaces. The positions of the plasma glow regions are compared with the positions of discontinuity surfaces of numerically calculated gasdynamic parameters in the flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2012

Simulation and Analysis of Converging Shock Wave Test Problems

Results and analysis pertaining to the simulation of the Guderley converging shock wave test problem (and associated code verification hydrodynamics test problems involving converging shock waves) in the LANL ASC radiation-hydrodynamics code xRAGE are presented. One-dimensional (1D) spherical and two-dimensional (2D) axi-symmetric geometric setups are utilized and evaluated in this study, as is an instantiation of the xRAGE adaptive mesh refinement capability. For the 2D simulations, a 'Surrogate Guderley' test problem is developed and used to obviate subtleties inherent to the true Guderley solution's initialization on a square grid, while still maintaining a high degree of fidelity to the original problem, and minimally straining the general credibility of associated analysis and conclusions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Experimental investigation of the shock wave in a fast discharge with cylindrical geometry

The work is devoted to the registration and the study of the properties of cylindrical shock waves generated in the fast discharge (dI/dt ∼ 10{sup 12} A/s) inside the ceramic tube (Al{sub 2}O{sub 3}) filled by argon at pressures of 100 and 300 Pa. The shock wave appears at the inner wall of the insulator and moves to the discharge axis with a velocity of about (3−4) × 10{sup 6} cm/s with subsequent cumulation. The plasma behind the front is heated enough to produce radiation in the vacuum ultraviolet (VUV) region, which makes it possible to study its structure by means of a pinhole camera with a microchannel plate detector. The time resolution of the registration system was 10 ns. The analysis of VUV spectra of the plasma shows that the electron temperature behind the shock wave front is about several eV; after the moment of cumulation, its temperature increases to 20–30 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1995

Augmented shock wave fracture/severance of materials

The present invention related generally to severing materials, and more particularly to severing or weakening materials through explosively induced, augmented shock waves. Explosive cords are placed in grooves on the upper surface of the material to be severed or weakened. The explosive cords are initiated simultaneously to introduce explosive shock waves into the material. These shock waves progress toward the centerline between the explosive cords and the lower surface of the material. Intersecting and reflected waves produce a rarefaction zone on the centerline to fail the material in tension. A groove may also be cut in the lower surface of the material to aid in severing or weakening the material.

Schimmel, Morry L.↗