Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Structural Shape Sensing from Strain Data Using the Basis Function Method

An aircraft shape must be measured during flight to implement an active trim shape control, such as an active dihedral control for a highly flexible aircraft with a high-aspect-ratio wing, and an active sonic boom control for a supersonic transport aircraft. A basis function method for linear as well as geometrically nonlinear structural shape sensing is proposed in this study. Basis functions can be mode shapes, linear static deformation shapes, or geometrically nonlinear static deformation shapes. The proposed basis function method is validated using a high-aspect-ratio wing, a swept test plate, and the National Aeronautics and Space Administration Low Boom Flight Demonstration mission X-59 Quiet Supersonic Technology (QueSST) aircraft (Lockheed Martin, Bethesda, Maryland). A large structural deformation of a high-aspect-ratio wing is successfully captured using the proposed basis function method with less than 0.3-percentprediction error at the wing-tip section. The basis function method gives excellent deformation prediction, even with stress concentration. Performance of the basis functions is compared using the X-59 stabilator sample case. In most of the sample load cases, static deformations give a better correlation with the target deformation than do mode shapes. Wing shape sensing with sparse strain data is also demonstrated in this study using the X-59 QueSST aircraft. Predicted structural deformations match reasonably with the target deformations even without strain gauges on some structural components. The predicted deformations have a good match with the target deformations.

Chan-gi Pak↗
NASA NTRS1979

Experimental measurements of the rotating frequencies and mode shapes of a full scale helicopter rotor in a vacuum and correlations with calculated results

This paper presents results of an experimental program conducted to obtain data which can be used for correlations of rotor blade dynamic analyses. Measurements were made of the rotating frequencies and mode shapes of a representative full-scale, two-bladed helicopter rotor in a vacuum. The blades were cantilevered to the hub. Mode shape data were obtained optically using a system of cameras developed specifically for this purpose. Excitation of the rotor was provided by vertical oscillatory motion of the hub. To compare experimental and analytical results, correlations of some experimental measurements with calculations from an existing blade modes computer program based on a Holzer-Myklestad procedure are presented, and the differences between the results are discussed. The experimental and analytical natural frequencies were generally in good agreement as were the principal components of the modal deflections for the flap and lag modes. The torsion mode shape indicated disagreement between the measured and calculated results in regard to the amount of flap and lag motions present in this mode, while the spanwise variations of the measured and calculated torsional components were in agreement.

Lee, B. L.↗
NASA NTRS1978

Interpretation of the shape factor at Ootacamund, India

The paper deals with equatorial ATS-6 measurements of the shape factor, F, interpreted in terms of the shape of the electron density profile along the ray path. The observed rapid increase in F at sunrise is attributed to EUV production of ionization in the E and F regions. The evening decrease is seen to result from an upward drift of the F region at sunset and the evening decay of the E and bottomside F regions. The nighttime peak, or plateau, is caused by gradual decrease of the electron density profile.

Donnelly, R. F.↗
NASA NTRS1993

The sensitivity of identified modal parameters to sensor placement errors and construction tolerances

This paper examines the sensitivity of experimentally measured modal frequencies and mode shapes to structural reassembly and sensor placement errors on a suspended three-bay truss. The statistical variations of identified mode shapes and frequencies are measured by repeated experiments. Both parameters are shown to vary measurably more with reassembly than sensor placement errors. Also, a directional stiffness in the truss joints was found to cause a parameter dependence on member orientation during reconstruction.

Hinkle, Jason↗
NASA NTRS2008

Fiber Optic Wing Shape Sensing on NASA's Ikhana UAV

This document discusses the development of fiber optic wing shape sensing on NASA's Ikhana vehicle. The Dryden Flight Research Center's Aerostructures Branch initiated fiber-optic instrumentation development efforts in the mid-1990s. Motivated by a failure to control wing dihedral resulting in a mishap with the Helios aircraft, new wing displacement techniques were developed. Research objectives for Ikhana included validating fiber optic sensor measurements and real-time wing shape sensing predictions; the validation of fiber optic mathematical models and design tools; assessing technical viability and, if applicable, developing methodology and approaches to incorporate wing shape measurements within the vehicle flight control system; and, developing and flight validating approaches to perform active wing shape control using conventional control surfaces and active material concepts.

Richards, Lance↗
NASA NTRS2013

The Debris Disk Explorer: A Balloon-Borne Coronagraph for Observing Debris Disks

The Debris Disk Explorer (DDX) is a proposed balloon-borne investigation of debris disks around nearby stars. Debris disks are analogs of the Asteroid Belt (mainly rocky) and Kuiper Belt (mainly icy) in our Solar System. DDX will measure the size, shape, brightness, and color of tens of disks. These measurements will enable us to place the Solar System in context. By imaging debris disks around nearby stars, DDX will reveal the presence of perturbing planets via their influence on disk structure, and explore the physics and history of debris disks by characterizing the size and composition of disk dust. The DDX instrument is a 0.75-m diameter off-axis telescope and a coronagraph carried by a stratospheric balloon. DDX will take high-resolution, multi-wavelength images of the debris disks around tens of nearby stars. Two flights are planned; an overnight test flight within the United States followed by a month-long science flight launched from New Zealand. The long flight will fully explore the set of known debris disks accessible only to DDX. It will achieve a raw contrast of 10(exp -7), with a processed contrast of 10(exp -8). A technology benefit of DDX is that operation in the near-space environment will raise the Technology Readiness Level of internal coronagraphs, deformable mirrors, and wavefront sensing and control, all potentially needed for a future space-based telescope for high-contrast exoplanet imaging.

High Altitude Balloon↗
NASA NTRSDate not supplied

Directed Illumination of Sunlight Collimated and Observed Beneath A Lunar Lander (DISCOBaLL): Structured Illumination for a Lunar Surface Photogrammetry System

A lighting system has been developed to provide structured illumination allowing photogrammetry to be performed during and after landing on extraterrestrial bodies. The system, known as Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL), provides patterned lighting suitable for two- and multiple-camera photogrammetry, allowing several different measurements to be obtained including pre-landing terrain shape, visualization and localization of the ejecta sheet during landing, and post-landing terrain shape enabling quantitative measurement of plume-induced cratering. The paper explains the methodology of designing the DISCOBaLL, describes multiple prototypes, and shows the performance of these prototypes using actual solar radiation in a laboratory setting.

Plume-Surface Interaction↗
NASA NTRSDate not supplied

Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL): Structured Illumination For a Lunar Surface Photogrammetry System

A lighting system has been developed to provide structured illumination allowing photogrammetry to be performed during and after landing on extraterrestrial bodies. The system, known as Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL), provides patterned lighting suitable for two- and multiple-camera photogrammetry, allowing several different measurements to be obtained including pre-landing terrain shape, visualization and localization of the ejecta sheet during landing, and post-landing terrain shape enabling quantitative measurement of plume-induced cratering. The paper explains the methodology of designing the DISCOBaLL, describes multiple prototypes, and shows the performance of these prototypes using actual solar radiation in a laboratory setting.

Lunar Regolith↗
NASA NTRS2009

Photometric Studies of Orbital Debris at GEO

Orbital debris represents a significant and increasing risk to operational spacecraft. Here we report on photometric observations made in standard BVRI filters at the Cerro Tololo Inter-American Observatory (CTIO) in an effort to determine the physical characteristics of optically faint debris at geosynchronous Earth orbit (GEO). Our sample is taken from GEO objects discovered in a survey with the University of Michigan s 0.6-m Curtis-Schmidt telescope (known as MODEST, for Michigan Orbital DEbris Survey Telescope), and then followed up in real-time with the CTIO/SMARTS 0.9-m for orbits and photometry. For a sample of 50 objects, calibrated sequences in RB- V-I-R filters have been obtained with the CTIO/SMARTS 0.9-m. For objects that do not show large brightness variations, the colors are largely redder than solar in both B-R and R-I. The width of the color distribution may be intrinsic to the nature of the surfaces, but also could imply that we are seeing irregularly shaped objects and measuring the colors at different times with just one telescope. For irregularly shaped objects tumbling at unknown orientations and rates, such sequential filter measurements using one telescope are subject to large errors for interpretation. If all observations in all filters in a particular sequence are of the same surface at the same solar and viewing angles, then the colors are meaningful. Where this is not the case, interpretation of the observed colors is impossible. For a smaller sample of objects we have observed with synchronized CCD cameras on the two telescopes. The CTIO/SMARTS 0.9-m observes in B, and the Schmidt in R. The CCD cameras are electronically linked together so that the start time and duration of observations are both the same to better than 50 milliseconds. Now the observed B-R color is a true measure of the scattered illuminated area of the debris piece for that observation.

Seitzer, Patrick↗
NASA NTRS2011

The Experimental Measurement of Aerodynamic Heating About Complex Shapes at Supersonic Mach Numbers

In 2008 a wind tunnel test program was implemented to update the experimental data available for predicting protuberance heating at supersonic Mach numbers. For this test the Langley Unitary Wind Tunnel was also used. The significant differences for this current test were the advances in the state-of-the-art in model design, fabrication techniques, instrumentation and data acquisition capabilities. This current paper provides a focused discussion of the results of an in depth analysis of unique measurements of recovery temperature obtained during the test.

Neumann, Richard D.↗
NASA NTRS1989

Theoretical analysis and meteorological interpretation of the role of raindrop shape on microwave attenuation and propagation phase shifts - Implications for the radar measurement of rain

The effects of raindrop shape on the attenuation and propagation phase shift at vertical and horizontal linear polarizations is examined, focusing on the implications of these effects on rain measurements by radars. Analytic expressions for the imaginary and real components of the forward scattering amplitude function are dervied for a wavelength of 2.2 cm. It is shown that the summation attenuation rate and the rate of summation propagation phase shift are both insensitive to the shapes of raindrops.

Jameson, A. R.↗
NASA NTRS2011

Zodiac II: Debris Disk Science from a Balloon

Zodiac II is a proposed balloon-borne science investigation of debris disks around nearby stars. Debris disks are analogs of the Asteroid Belt (mainly rocky) and Kuiper Belt (mainly icy) in our Solar System. Zodiac II will measure the size, shape, brightness, and color of a statistically significant sample of disks. These measurements will enable us to probe these fundamental questions: what do debris disks tell us about the evolution of planetary systems; how are debris disks produced; how are debris disks shaped by planets; what materials are debris disks made of; how much dust do debris disks make sa they grind down; and how long do debris disks live? In addition, Zodiac II will observe hot, young exoplanets as targets of opportunity. The Zodiac II instrument is a 1.1-m diameter SiC telescope and an imaging coronagraph on a gondola carried by a stratospheric balloon. Its data product is a set of images of each targeted debris disk in four broad visible wavelength bands. Zodiac II will address its science questions by taking high-resolution, multi-wavelength images of the debris disks around tens of nearby stars. Mid-latitude flights are considered: overnight test flights within the United States followed by half-global flights in the Southern Hemisphere. These longer flights are required to fully explore the set of known debris disks accessible only to Zodiac II. On these targets, it will be 100 times more sensitive than the Hubble Space Telescope's Advanced Camera for Surveys (HST/ACS); no existing telescope can match the Zodiac II contrast and resolution performance. A second objective of Zodiac II is to use the near-space environment to raise the Technology Readiness Level (TRL) of SiC mirrors, internal coronagraphs, deformable mirrors, and wavefront sensing and control, all potentially needed for a future space-based telescope for high-contrast exoplanet imaging.

Bryden, Geoffrey↗
NASA NTRS2011

Zodiac II: Debris Disk Science from a Balloon

Zodiac II is a proposed balloon-borne science investigation of debris disks around nearby stars. Debris disks are analogs of the Asteroid Belt (mainly rocky) and Kuiper Belt (mainly icy) in our Solar System. Zodiac II will measure the size, shape, brightness, and color of a statistically significant sample of disks. These measurements will enable us to probe these fundamental questions: what do debris disks tell us about the evolution of planetary systems; how are debris disks produced; how are debris disks shaped by planets; what materials are debris disks made of; how much dust do debris disks make as they grind down; and how long do debris disks live? In addition, Zodiac II will observe hot, young exoplanets as targets of opportunity. The Zodiac II instrument is a 1.1-m diameter SiC (Silicone carbide) telescope and an imaging coronagraph on a gondola carried by a stratospheric balloon. Its data product is a set of images of each targeted debris disk in four broad visible-wavelength bands. Zodiac II will address its science questions by taking high-resolution, multi-wavelength images of the debris disks around tens of nearby stars. Mid-latitude flights are considered: overnight test flights in the US followed by half-global flights in the Southern Hemisphere. These longer flights are required to fully explore the set of known debris disks accessible only to Zodiac II. On these targets, it will be 100 times more sensitive than the Hubble Space Telescope's Advanced Camera for Surveys (HST/ACS); no existing telescope can match the Zodiac II contrast and resolution performance. A second objective of Zodiac II is to use the near-space environment to raise the Technology Readiness Level (TRL) of SiC mirrors, internal coronagraphs, deformable mirrors, and wavefront sensing and control, all potentially needed for a future space-based telescope for high-contrast exoplanet imaging.

suborbital↗
NASA NTRS1988

Estimating electric field enhancement factors on an aircraft utilizing a small scale model: A method evaluation

A method for obtaining field enhancement factors at specific points on an aircraft utilizing a small scale model was evaluated by measuring several canonical shapes. Comparison of the form factors obtained by analytical means with measurements indicate that the experimental method has serious flaws. Errors of 200 to 300 percent were found between analytical values and measured values. As a result of the study, the analytical method is not recommended for calibration of field meters located on aircraft, and should not be relied upon in any application where the local spatial derivatives of the electric field on the model are large over the dimensions of the sensing probe.

Easterbrook, Calvin C.↗
NASA NTRS1984

Edge analyzing properties of center/surround response functions in cybernetic vision

The ability of center/surround response functions to make explicit high resolution spatial information in optical images was investigated by performing convolutions of two dimensional response functions and image intensity functions (mainly edges). The center/surround function was found to have the unique property of separating edge contrast from shape variations and of providing a direct basis for determining contrast and subsequently shape of edges in images. Computationally simple measures of contrast and shape were constructed for potential use in cybernetic vision systems. For one class of response functions these measures were found to be reasonably resilient for a range of scan direction and displacements of the response functions relative to shaped edges. A pathological range of scan directions was also defined and methods for detecting and handling these cases were developed. The relationship of these results to biological vision is discussed speculatively.

Jobson, D. J.↗
NASA NTRS1995

A laser-based ice shape profilometer for use in icing wind tunnels

A laser-based profilometer was developed to measure the thickness and shape of ice accretions on the leading edge of airfoils and other models in icing wind tunnels. The instrument is a hand held device that is connected to a desk top computer with a 10 meter cable. It projects a laser line onto an ice shape and used solid state cameras to detect the light scattered by the ice. The instrument corrects the image for camera angle distortions, displays an outline of the ice shape on the computer screen, saves the data on a disk, and can print a full scale drawing of the ice shape. The profilometer has undergone extensive testing in the laboratory and in the NASA Lewis Icing Research Tunnel. Results of the tests show very good agreement between profilometer measurements and known simulated ice shapes and fair agreement between profilometer measurements and hand tracing techniques.

Hovenac, Edward A.↗
NASA NTRS1976

Laser range measurements using non-Gaussian pulse shapes

Many optical ranging systems currently use laser pulses of approximately Gaussian shape with widths of a few nanoseconds or less. The present paper shows that a substantial improvement in accuracy can be obtained for a given pulse length by means of laser ranging systems using conventional length (long) pulses with a sharp leading edge pulse distribution. The accuracy in such a case will improve roughly linearly with the signal strength. Order statistics is used to estimate the round-trip level travel time from the arrival time of the earliest photoelectron.

Ghigo, F. D.↗