Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

XA21-mediated resistance to Xanthomonas oryzae pv. oryzae is dose dependent

The rice receptor kinase XA21 confers broad-spectrum resistance to Xanthomonas oryzae pv. oryzae ( Xoo ), the causal agent of rice bacterial blight disease. To investigate the relationship between the expression level of XA21 and resulting resistance, we generated independent HA-XA21 transgenic rice lines accumulating the XA21 immune receptor fused with an HA epitope tag. Whole-genome sequence analysis identified the T-DNA insertion sites in sixteen independent T0 events. Further, through quantification of the HA-XA21 protein and assessment of the resistance to Xoo strain PXO99 in six independent transgenic lines, we observed that XA21-mediated resistance is dose dependent. In contrast, based on the four agronomic traits quantified in these experiments, yield is unlikely to be affected by the expression level of HA-XA21 . These findings extend our knowledge of XA21-mediated defense and contribute to the growing number of well-defined genomic landing pads in the rice genome that can be targeted for gene insertion without compromising yield.

60 APPLIED LIFE SCIENCES↗

Next Generation Sequencing at the University of Chicago Genomics Core

The University of Chicago Genomics Core provides University of Chicago investigators (and external clients) access to State-of-the-Art genomics capabilities: next generation sequencing, Sanger sequencing / genotyping and micro-arrays (gene expression, genotyping, and methylation). The current presentation will highlight our capabilities in the area of ultra-high throughput sequencing analysis.

60 APPLIED LIFE SCIENCES↗

Genotypic and phenotypic characterization of aerosolized bacteria collected from African dust events

Twenty-one bacteria were isolated and characterized from air samples collected in Africa and the Caribbean by the United States Geological Survey (USGS). Isolates were selected based on preliminary characterization as possible pathogens. Identification of the bacterial isolates was 25 achieved using 16S rRNA gene sequence analysis, fatty acid methyl esters (FAMEs) profiling, the BIOLOG Microlog® System (carbon substrate assay), and repetitive extragenic palindromic (REP)-PCR analysis. The majority of isolates (18/21) were identified as species of the genus Bacillus. Three isolates were classified within the Bacillus cereus senso lato group, which includes Bacillus anthracis, Bacillus thuringiensis, and Bacillus cereus strains. One isolate was identified as a Staphylococcus sp., 30 most closely related to species (i.e Staphylococcus kloosii, Staphylococcus warneri) that are commonly associated with human or animal skin, but can also act as opportunistic pathogen. Another isolate was tentatively identified as Tsukamurella inchonensis, a known respiratory pathogen, and was resistant to the ten antibiotics tested including vancomycin.

59 BASIC BIOLOGICAL SCIENCES↗

Efficient Aho-Corasick String Matching on Emerging Multicore Architectures

String matching algorithms are critical to several scientific fields. Beside text processing and databases, emerging applications such as DNA protein sequence analysis, data mining, information security software, antivirus, ma- chine learning, all exploit string matching algorithms [3]. All these applica- tions usually process large quantity of textual data, require high performance and/or predictable execution times. Among all the string matching algorithms, one of the most studied, especially for text processing and security applica- tions, is the Aho-Corasick algorithm. 1 2 Book title goes here Aho-Corasick is an exact, multi-pattern string matching algorithm which performs the search in a time linearly proportional to the length of the input text independently from pattern set size. However, depending on the imple- mentation, when the number of patterns increase, the memory occupation may raise drastically. In turn, this can lead to significant variability in the performance, due to the memory access times and the caching effects. This is a significant concern for many mission critical applications and modern high performance architectures. For example, security applications such as Network Intrusion Detection Systems (NIDS), must be able to scan network traffic against very large dictionaries in real time. Modern Ethernet links reach up to 10 Gbps, and malicious threats are already well over 1 million, and expo- nentially growing [28]. When performing the search, a NIDS should not slow down the network, or let network packets pass unchecked. Nevertheless, on the current state-of-the-art cache based processors, there may be a large per- formance variability when dealing with big dictionaries and inputs that have different frequencies of matching patterns. In particular, when few patterns are matched and they are all in the cache, the procedure is fast. Instead, when they are not in the cache, often because many patterns are matched and the caches are continuously thrashed, they should be retrieved from the system memory and the procedure is slowed down by the increased latency. Efficient implementations of string matching algorithms have been the fo- cus of several works, targeting Field Programmable Gate Arrays [4, 25, 15, 5], highly multi-threaded solutions like the Cray XMT [34], multicore proces- sors [19] or heterogeneous processors like the Cell Broadband Engine [35, 22]. Recently, several researchers have also started to investigate the use Graphic Processing Units (GPUs) for string matching algorithms in security applica- tions [20, 10, 32, 33]. Most of these approaches mainly focus on reaching high peak performance, or try to optimize the memory occupation, rather than looking at performance stability. However, hardware solutions supports only small dictionary sizes due to lack of memory and are difficult to customize, while platforms such as the Cell/B.E. are very complex to program.

Tumeo, Antonino↗

ISMB Conference Funding to Support Attendance of Early Researchers and Students

ISMB Conference Funding for Students and Young Scientists Historical Description The Intelligent Systems for Molecular Biology (ISMB) conference has provided a general forum for disseminating the latest developments in bioinformatics on an annual basis for the past 22 years. ISMB is a multidisciplinary conference that brings together scientists from computer science, molecular biology, mathematics and statistics. The goal of the ISMB meeting is to bring together biologists and computational scientists in a focus on actual biological problems, i.e., not simply theoretical calculations. The combined focus on “intelligent systems” and actual biological data makes ISMB a unique and highly important meeting. 21 years of experience in holding the conference has resulted in a consistently well-organized, well attended, and highly respected annual conference. "Intelligent systems" include any software which goes beyond straightforward, closed-form algorithms or standard database technologies, and encompasses those that view data in a symbolic fashion, learn from examples, consolidate multiple levels of abstraction, or synthesize results to be cognitively tractable to a human, including the development and application of advanced computational methods for biological problems. Relevant computational techniques include, but are not limited to: machine learning, pattern recognition, knowledge representation, databases, combinatorics, stochastic modeling, string and graph algorithms, linguistic methods, robotics, constraint satisfaction, and parallel computation. Biological areas of interest include molecular structure, genomics, molecular sequence analysis, evolution and phylogenetics, molecular interactions, metabolic pathways, regulatory networks, developmental control, and molecular biology generally. Emphasis is placed on the validation of methods using real data sets, on practical applications in the biological sciences, and on development of novel computational techniques. The ISMB conferences are distinguished from many other conferences in computational biology or artificial intelligence by an insistence that the researchers work with real molecular biology data, not theoretical or toy examples; and from many other biological conferences by providing a forum for technical advances as they occur, which otherwise may be shunned until a firm experimental result is published. The resulting intellectual richness and cross-disciplinary diversity provides an important opportunity for both students and senior researchers. ISMB has become the premier conference series in this field with refereed, published proceedings, establishing an infrastructure to promote the growing body of research.

60 APPLIED LIFE SCIENCES↗

Assembling large, complex environmental metagenomes

The large volumes of sequencing data required to sample complex environments deeply pose new challenges to sequence analysis approaches. De novo metagenomic assembly effectively reduces the total amount of data to be analyzed but requires significant computational resources. We apply two pre-assembly filtering approaches, digital normalization and partitioning, to make large metagenome assemblies more computationaly tractable. Using a human gut mock community dataset, we demonstrate that these methods result in assemblies nearly identical to assemblies from unprocessed data. We then assemble two large soil metagenomes from matched Iowa corn and native prairie soils. The predicted functional content and phylogenetic origin of the assembled contigs indicate significant taxonomic differences despite similar function. The assembly strategies presented are generic and can be extended to any metagenome; full source code is freely available under a BSD license.

54 ENVIRONMENTAL SCIENCES↗

CSB-RNN: A Faster-Than-Realtime RNN Acceleration Framework with Compressed Structured Blocks

Recurrent Neural Networks (RNN) is widely applied to temporal sequence analysis, where real-time performance is usually in demand. However, RNN suffers a heavy computational workload as the model comes with a large weight matrix. To alleviate the pain, model compression (pruning) schemes have been proposed for RNN that pruning the redundant (near-zero) weight-values. On the one hand, the non-structured pruning methods achieve a considerable pruning rate while bringing the computational irregularity, which is un-friendly to parallel-hardware. On the other hand, the existing structured pruning methods consider the hardware parallelism; However, they suffer a poor pruning rate due to the restrict constraints on pruning structure. This paper presents CSB-RNN, an optimized full-stack RNN framework with the novel compressed structured block (CSB) technique. The CSB-pruned RNN model comes with both fine-granularity that benefits the pruning rate and regular structure that facilitates the hardware-parallelism. Further, we propose a novel hardware architecture for inferencing the CSB-pruned model. Different from conventional parallel hardware, this architecture solves the block-workload imbalance issue and achieves an over 95% hardware utilization. With the experiments on 10 RNN models in 5 application domains, the CSB-RNN realizes 7×-20× lossless compression and up to 50× acceptable lossy-compression, which is 2×-7× to the prior art. With the addition of the novel hardware, the compressed-RNN inference reaches a super real-time latency of 10-400µs with FPGA implementation.

Shi, Runbin↗

Toward a lean analysis for waste to support the decommissioning operation - 15321

All over the world, several nuclear facilities have been shut down few years ago and are now under dismantling or will be dismantled in the future. - Dismantling project takes place according to three major phases: - Study and definition of the dismantling scenario - Dismantling site operations - Decommissioning and final state characterization. Each step is lead in agreement with safety, security and waste management. This requires analytical tools appropriate to the radiological environment and aims. In the field of security, fissile products, explosives... will be researched and quantified while occupational safety requires quantification of radiological, carcinogenic, mutagenic and reprotoxic elements such as As, Se, Cr(IV)... or even asbestos in order to follow more and more strengthened rules. For waste management, radiological and chemical quantification are necessary but must be completed by determining physical and chemical properties such as reactivity, stability or dissolution of the waste... Required level of knowledge, analytical deadline, uncertainties, limits of detection and matrix varieties depend on the decommissioning phase. Setting up a dismantling scenario requires the most possible accurate knowledge of the initial source term present in the facility, in order to establish waste management flow-sheets, define dismantling intervention modes, and prepare the associated safety demonstrations. As history is often not sufficient, in-situ investigations and off-site laboratories are necessary to assign an initial waste and radiological inventory and propose some strategy operations. When a first scenario is chosen, more detailed samplings and analyses are required to fully prepare estimates of waste volumes and categories, and define and validate the waste recovery system that would be used during the dismantling operation. As the definition of the dismantling plan takes shape, data must be more and more accurate and reliable in order to define the waste outlet. The scaling factors for the waste must be defined in order to assure the refunding of the waste. This includes complete characterizations of various matrixes, with high precision, low detection limit in a limited time of few months, as sketchy data could lead to fix inappropriate plan Once site operations begin, it is necessary to control the safety operational conditions and waste production. Measurements requirement is under the safety threshold. Matrixes are often limited to filter. The most important factor is deadline, because operations delay is costly. Finally at the end of dismantling operations, analyses must be performed to demonstrate the successful clean-up of the work site. Analytical methods with low detection limit are required. Thus, characterization appears as a graded and iterative process and is a key issue for decommissioning and dismantling operations in term of efficiency and cost. In order to face this huge analytical demand, a strategy for sampling and characterization must be developed regarding the real needs. On site measurements are usually performed with existing hand-held instruments. A basic first level of knowledge is obtained without delay, feeding the dismantling scenario. On these bases, a sampling strategy permits to select some representative specimens to be more precise, and accurate analysis is performed on off-site laboratories introducing an additional difficulty: the sampling on the site and sub-sampling in the laboratory itself. Whatever the level of sampling, aliquots are small considering the dimension of the dismantling area. This step is crucial. Sampling strategy must be optimized according to objectives (scaling factors measurement, waste level). But in the particular case of high radioactive level waste, due to security manipulation constraints, the number and mass of samples collected are limited. At the opposite for low level waste, large number of samples is collected meaning that large analytical method capacity is necessary. Optimization of the analytical plan is critical. The analytical strategy (including control of sub-sampling, analysis sequence according to analytical capability and performances, especially for pure beta emitters) developed for real case will be detailed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Potential Biodegradation of Butyric Acid by Lysinibacillus fusiformis Isolated from a Pit Latrine in South Africa - 18150

Butyric acid is one of the volatile organic compounds (VOCs) which significantly contribute to pit latrine noxious odours. It has low odour detection thresholds. Current methods in reducing odour emitted from pit latrines in low incomes communities are ineffective due to economic, technological and social constraints. To seek the butyric acid-degrading bacteria, faecal sludge samples from pit latrine were collected to isolate them. Nine butyric acid-utilising isolates were obtained but the bacterial isolate designated as C4c was further investigated. The bacterial isolate was investigated under different environmental conditions. Under aerobic condition it was found that the isolate has best capability to utilise butyric optimally when the temperature was 30 deg. C and at pH of 7.0. The isolate was able to utilise butyric acid up to the concentration of 5000 mgL{sup -1}. In accordance with the 16S rRNA sequence analysis the isolate was identified as Lysinibacillus fusiformis. This, therefore, indicates that the isolate can be effectively used for bioremediation of butyric acid in the pit latrines. (authors)

54 ENVIRONMENTAL SCIENCES↗

Cyclic Prefix Direct Sequence Spread Spectrum Capacity Analysis

Cyclic Prefix Direct Sequence Spread Spectrum (CP-DSSS) is a novel waveform that has the potential to solve 5G objectives such as ultra reliable low latency communication (URLLC) and massive machine Type Communication (mMTC). This paper analyzes the capacity of the CP-DSSS waveform in comparison with Orthogonal Frequency Domain Multiplexing OFDM). CP-DSSS can be optimized to achieve the same capacity as OFDM when optimized by the water-filling algorithm. A significant advantage for CP-DSSS is that this capacity can be achieved with all symbols being transmitted with the same effective rate. As a result, stronger forward error correction codes can be used in a CP-DSSS implementation compared to an OFDM implementation with resource block constraints. In addition, the applicability of CP-DSSS as a waveform for a secondary network operating in the same frequency band as the primary network is discussed.

5G and Beyond Communications↗

Genome sequencing and transcriptome analysis of Trichoderma reesei QM9978 strain reveals a distal chromosome translocation to be responsible for loss of vib1 expression and loss of cellulase induction

Background: The hydrolysis of biomass to simple sugars used for the production of biofuels in biorefneries requires the action of cellulolytic enzyme mixtures. During the last 50 years, the ascomycete Trichoderma reesei, the main source of industrial cellulase and hemicellulase cocktails, has been subjected to several rounds of classical mutagenesis with the aim to obtain higher production levels. During these random genetic events, strains unable to produce cellulases were generated. Here, whole genome sequencing and transcriptomic analyses of the cellulase-negative strain QM9978 were used for the identifcation of mutations underlying this cellulase-negative phenotype. Results: Sequence comparison of the cellulase-negative strain QM9978 to the reference strain QM6a identifed a total of 43 mutations, of which 33 were located either close to or in coding regions. From those, we identifed 23 single-nucleotide variants, nine InDels, and one translocation. The translocation occurred between chromosomes V and VII, is located upstream of the putative transcription factor vib1, and abolishes its expression in QM9978 as detected during the transcriptomic analyses. Ectopic expression of vib1 under the control of its native promoter as well as overexpression of vib1 under the control of a strong constitutive promoter restored cellulase expression in QM9978, thus confrming that the translocation event is the reason for the cellulase-negative phenotype. Gene deletion of vib1 in the moderate producer strain QM9414 and in the high producer strain Rut-C30 reduced cellulase expression in both cases. Overexpression of vib1 in QM9414 and Rut-C30 had no efect on cellulase production, most likely because vib1 is already expressed at an optimal level under normal conditions. Conclusion: We were able to establish a link between a chromosomal translocation in QM9978 and the cellulasenegative phenotype of the strain. We identifed the transcription factor vib1 as a key regulator of cellulases in T. reesei whose expression is absent in QM9978. We propose that in T. reesei, as in Neurospora crassa, vib1 is involved in cellulase induction, although the exact mechanism remains to be elucidated. The data presented here show an example of a combined genome sequencing and transcriptomic approach to explain a specifc trait, in this case the QM9978 cellulase-negative phenotype, and how it helps to better understand the mechanisms during cellulase gene regulation. When focusing on mutations on the single base-pair level, changes on the chromosome level can be easily overlooked and through this work we provide an example that stresses the importance of the big picture of the genomic landscape during analysis of sequencing data.

09 BIOMASS FUELS↗

Targeted Analysis of Whole Genome Sequence Data to Diagnose Genetic Cardiomyopathy

Background—Cardiomyopathy is highly heritable but genetically diverse. At present, genetic testing for cardiomyopathy uses targeted sequencing to simultaneously assess the coding regions of more than 50 genes. New genes are routinely added to panels to improve the diagnostic yield. With the anticipated $1000 genome, it is expected that genetic testing will shift towards comprehensive genome sequencing accompanied by targeted gene analysis. Therefore, we assessed the reliability of whole genome sequencing and targeted analysis to identify cardiomyopathy variants in 11 subjects with cardiomyopathy. Methods and Results—Whole genome sequencing with an average of 37× coverage was combined with targeted analysis focused on 204 genes linked to cardiomyopathy. Genetic variants were scored using multiple prediction algorithms combined with frequency data from public databases. This pipeline yielded 1-14 potentially pathogenic variants per individual. Variants were further analyzed using clinical criteria and/or segregation analysis. Three of three previously identified primary mutations were detected by this analysis. In six subjects for whom the primary mutation was previously unknown, we identified mutations that segregated with disease, had clinical correlates, and/or had additional pathological correlation to provide evidence for causality. For two subjects with previously known primary mutations, we identified additional variants that may act as modifiers of disease severity. In total, we identified the likely pathological mutation in 9 of 11 (82%) subjects. We conclude that these pilot data demonstrate that ~30-40× coverage whole genome sequencing combined with targeted analysis is feasible and sensitive to identify rare variants in cardiomyopathy-associated genes.

59 BASIC BIOLOGICAL SCIENCES↗

GenomeGraphR: A user-friendly open-source web application for foodborne pathogen whole genome sequencing data integration, analysis, and visualization

Food safety risk assessments and large-scale epidemiological investigations have the potential to provide better and new types of information when whole genome sequence (WGS) data are effectively integrated. Today, the NCBI Pathogen Detection database WGS collections have grown significantly through improvements in technology, coordination, and collaboration, such as the GenomeTrakr and PulseNet networks. However, high-quality genomic data is not often coupled with high-quality epidemiological or food chain metadata. We have created a set of tools for cleaning, curation, integration, analysis and visualization of microbial genome sequencing data. It has been tested using Salmonella enterica and Listeria monocytogenes data sets provided by NCBI Pathogen Detection (160,000 sequenced isolates in 2018). GenomeGraphR presents foodborne pathogen WGS data and associated curated metadata in a user-friendly interface that allows a user to query a variety of research questions such as, transmission sources and dynamics, global reach, and persistence of genotypes associated with contamination in the food supply and foodborne illness across time or space. The application is freely available (https://fda-riskmodels.foodrisk.org/ genomegraphr/).

60 APPLIED LIFE SCIENCES↗

A statistical analysis on transcriptome sequences: The enrichment of Alu-element is associated with subcellular location

Highlights: • The enrichment of Alu-element is associated with subcellular location. • mRNAs and lncRNAs share the same sequence form for Alu-element. • Alu-element is preferentially located at the 3′ end. The Alu-element plays important roles in mediating alternative splicing, RNA editing and translation regulation. However, the distribution and function of the Alu-element are never analysed at the transcriptome level. This study presents a statistical analysis of the Alu-element on human transcriptome. We found that mRNAs and lncRNAs share the same sequence form for the Alu-element. The Alu-element covers 5.8% of the coding transcripts and 17.1% of the coding genes for mRNAs, and covers 9.3% of the transcripts and 13.6% of the genes for lncRNAs. The Alu-element is preferentially located at the 3′ end. Statistical analysis demonstrates that the enrichment of Alu-element is associated with subcellular location. For instance, Alu-inclusive transcripts are overexpressed in nucleus, mitochondrion and Golgi apparatus membrane while under-expressed in cell membrane and extracellular space. We found that genes contain both Alu−element and S− domains of 7SL RNA are all associated with cellular activities carried out in mitochondrion.

60 APPLIED LIFE SCIENCES↗

Sequence and phylogenetic analysis of virulent Newcastle disease virus isolates from Pakistan during 2009–2013 reveals circulation of new sub genotype

Despite observing the standard bio-security measures at commercial poultry farms and extensive use of Newcastle disease vaccines, a new genotype VII-f of Newcastle disease virus (NDV) got introduced in Pakistan during 2011. In this regard 300 ND outbreaks recorded so far have resulted into huge losses of approximately USD 200 million during 2011–2013. A total of 33 NDV isolates recovered during 2009–2013 throughout Pakistan were characterized biologically and phylogenetically. The phylogenetic analysis revealed a new velogenic sub genotype VII-f circulating in commercial and domestic poultry along with the earlier reported sub genotype VII-b. Partial sequencing of Fusion gene revealed two types of cleavage site motifs; lentogenic {sup 112}GRQGRL{sup 117} and velogenic {sup 112}RRQKRF{sup 117} along with some point mutations indicative of genetic diversity. We report here a new sub genotype of virulent NDV circulating in commercial and backyard poultry in Pakistan and provide evidence for the possible genetic diversity which may be causing new NDV out breaks. - Highlights: • The first report of isolation of new genotype VII-f of virulent Newcastle disease virus (NDV) in Pakistan. • We report the partial Fusion gene sequences of new genotype VII-f of virulent NDV from Pakistan. • We report the phylogenetic relationship of new NDV strains with reported NDV strains. • Provide outbreak history of new virulent NDV strain in commercial and backyard poultry in Pakistan. • We provide possible evidence for the role of backyard poultry in NDV outbreaks.

60 APPLIED LIFE SCIENCES↗

Prevalence and diversity of TAL effector-like proteins in fungal endosymbiotic Mycetohabitans spp.

EndofungalMycetohabitans(formerlyBurkholderia) spp. rely on a type III secretion system to deliver mostly unidentified effector proteins when colonizing their host fungus,Rhizopus microsporus. The one known secreted effector family fromMycetohabitansconsists of homologues of transcription activator-like (TAL) effectors, which are used by plant pathogenicXanthomonasandRalstoniaspp. to activate host genes that promote disease. These ‘BurkholderiaTAL-like (Btl)’ proteins bind corresponding specific DNA sequences in a predictable manner, but their genomic target(s) and impact on transcription in the fungus are unknown. Recent phenotyping of Btl mutants of twoMycetohabitansstrains revealed that the single Btl in oneMycetohabitans endofungorumstrain enhances fungal membrane stress tolerance, while others in aMycetohabitans rhizoxinicastrain promote bacterial colonization of the fungus. The phenotypic diversity underscores the need to assess the sequence diversity and, given that sequence diversity translates to DNA targeting specificity, the functional diversity of Btl proteins. Using a dual approach to maximize capture of Btl protein sequences for our analysis, we sequenced and assembled nineMycetohabitansspp. genomes using long-read PacBio technology and also mined available short-read Illumina fungal–bacterial metagenomes. We show thatbtlgenes are present across diverseMycetohabitansstrains from Mucoromycota fungal hosts yet vary in sequences and predicted DNA binding specificity. Phylogenetic analysis revealed distinct clades of Btl proteins and suggested thatMycetohabitansmight contain more species than previously recognized. Within our data set, Btl proteins were more conserved acrossM. rhizoxinicastrains than acrossM. endofungorum, but there was also evidence of greater overall strain diversity within the latter clade. Overall, the results suggest that Btl proteins contribute to bacterial–fungal symbioses in myriad ways.

Genetics & Heredity↗

Genome Sequencing and Comparative Analysis of the Biocontrol Agent Trichoderma harzianum sensu stricto TR274

Biological control is a complex process which requires many mechanisms and a high diversity of biochemical pathways. The species of Trichoderma harzianum are well known for their biocontrol activity against many plant pathogens. To gain new insights into the biocontrol mechanism used by T. harzianum, we sequenced the isolate TR274 genome using Illumina. The assembly was performed using AllPaths-LG with a maximum coverage of 100x. The assembly resulted in 2282 contigs with a N50 of 37033bp. The genome size generated was 40.8 Mb and the GC content was 47.7%, similar to other Trichoderma genomes. Using the JGI Annotation Pipeline we predicted 13,932 genes with a high transcriptome support. CEGMA tests suggested 100% genome completeness and 97.9% of RNA-SEQ reads were mapped to the genome. The phylogenetic comparison using orthologous proteins with all Trichoderma genomes sequenced at JGI, corroborates the Trichoderma (T. asperellum and T. atroviride), Longibrachiatum (T. reesei and T. longibrachiatum) and Pachibasium (T. harzianum and T. virens) section division described previously. The comparison between two Trichoderma harzianum species suggests a high genome similarity but some strain-specific expansions. Analyses of the secondary metabolites, CAZymes, transporters, proteases, transcription factors were performed. The Pachybasium section expanded virtually all categories analyzed compared with the other sections, specially Longibrachiatum section, that shows a clear contraction. These results suggests that these proteins families have an important role in their respective phenotypes. Future analysis will improve the understanding of this complex genus and give some insights about its lifestyle and the interactions with the environment.

Steindorff, Andrei S.↗

Library Screening, In Vivo Confirmation, and Structural and Bioinformatic Analysis of Pentapeptide Sequences as Substrates for Protein Farnesyltransferase

Protein farnesylation is a post-translational modification where a 15-carbon farnesyl isoprenoid is appended to the C-terminal end of a protein by farnesyltransferase (FTase). This process often causes proteins to associate with the membrane and participate in signal transduction pathways. The most common substrates of FTase are proteins that have C-terminal tetrapeptide CaaX box sequences where the cysteine is the site of modification. However, recent work has shown that five amino acid sequences can also be recognized, including the pentapeptides CMIIM and CSLMQ. In this work, peptide libraries were initially used to systematically vary the residues in those two parental sequences using an assay based on Matrix Assisted Laser Desorption Ionization–Mass Spectrometry (MALDI-MS). In addition, 192 pentapeptide sequences from the human proteome were screened using that assay to discover additional extended CaaaX-box motifs. Selected hits from that screening effort were rescreened using an in vivo yeast reporter protein assay. The X-ray crystal structure of CMIIM bound to FTase was also solved, showing that the C-terminal tripeptide of that sequence interacted with the enzyme in a similar manner as the C-terminal tripeptide of CVVM, suggesting that the tripeptide comprises a common structural element for substrate recognition in both tetrapeptide and pentapeptide sequences. Molecular dynamics simulation of CMIIM bound to FTase further shed light on the molecular interactions involved, showing that a putative catalytically competent Zn(II)-thiolate species was able to form. Bioinformatic predictions of tetrapeptide (CaaX-box) reactivity correlated well with the reactivity of pentapeptides obtained from in vivo analysis, reinforcing the importance of the C-terminal tripeptide motif. This analysis provides a structural framework for understanding the reactivity of extended CaaaX-box motifs and a method that may be useful for predicting the reactivity of additional FTase substrates bearing CaaaX-box sequences.

59 BASIC BIOLOGICAL SCIENCES↗