Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selective separators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Life Cycle Assessment of Innovative Carbon Dioxide Selective Membranes from Low Carbon Emission Sources: A Comparative Study

Carbon capture has been an important topic of the twenty-first century because of the elevating carbon dioxide (CO2) levels in the atmosphere. CO2 in the atmosphere is above 420 parts per million (ppm) as of 2022, 70 ppm higher than 50 years ago. Carbon capture research and development has mostly been centered around higher concentration flue gas streams. For example, flue gas streams from steel and cement industries have been largely ignored due to lower associated CO2 concentrations and higher capture and processing costs. Capture technologies such as solvent-based, adsorption-based, cryogenic distillation, and pressure-swing adsorption are under research, but many suffer from higher costs and life cycle impacts. Membrane-based capture processes are considered cost-effective and environmentally friendly alternatives. Over the past three decades, our research group at Idaho National Laboratory has led the development of several polyphosphazene polymer chemistries and has demonstrated their selectivity for CO2 over nitrogen (N2). Poly[bis((2-methoxyethoxy)ethoxy)phosphazene] (MEEP) has shown the highest selectivity. A comprehensive life cycle assessment (LCA) was performed to determine the life cycle feasibility of the MEEP polymer material compared to other CO2-selective membranes and separation processes. The MEEP-based membrane processes emit at least 42% less equivalent CO2 than Pebax-based membrane processes. Similarly, MEEP-based membrane processes produce 34–72% less CO2 than conventional separation processes. In all studied categories, MEEP-based membranes report lower emissions than Pebax-based membranes and conventional separation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗
DOE OSTI2020

Prediction by Convolutional Neural Networks of CO 2 /N 2 Selectivity in Porous Carbons from N 2 Adsorption Isotherm at 77 K

Abstract Porous carbons are an important class of porous materials with many applications, including gas separation. An N 2 adsorption isotherm at 77 K is the most widely used approach to characterize porosity. Conventionally, textual properties such as surface area and pore volumes are derived from the N 2 adsorption isotherm at 77 K by fitting it to adsorption theory and then correlating it to gas separation performance (uptake and selectivity). Here the N 2 isotherm at 77 K was used directly as input (representing feature descriptors for the porosity) to train convolutional neural networks to predict gas separation performance (using CO 2 /N 2 as a test case) for porous carbons. The porosity space for porous carbons was explored for higher CO 2 /N 2 selectivity. Porous carbons with a bimodal pore‐size distribution of well‐separated mesopores (3–7 nm) and micropores (<2 nm) were found to be most promising. This work will be useful in guiding experimental research of porous carbons with the desired porosity for gas separation and other applications.

Wang, Song↗
DOE OSTI2021

Ammonia separation from N 2 and H 2 over LTA zeolitic imidazolate framework membranes

LTA type zeolitic imidazolate framework membranes denoted as ZIF-21 were synthesized and evaluated for the separation of a commodity chemical, ammonia, from nitrogen and hydrogen. Membranes were grown using secondary seeded growth. Ammonia permeances were as high as 1727 GPU, with NH 3 /N 2 , and NH 3 /H 2 ideal selectivities of 35, and 12 respectively. ZIF-21 membranes were also evaluated for gas mixtures composed of 13.8:86.2 NH 3 /N 2 and NH 3 /H 2 , with mixture separation selectivities as high as 7.6 for NH 3 /N 2 . Differences in adsorption, and diffusivities were identified as the key separation mechanisms. Specifically, for both gas pairs the polar-polar interaction between ammonia and the linker polar channels, led to the preferential adsorption of ammonia, and therefore favored thermodynamically the separation of ammonia from nitrogen and hydrogen. In addition, for NH 3 /N 2 gas pair, differences in diffusivities was a contributing separation mechanism. For NH 3 /H 2 gas pair, due to the faster hydrogen diffusivity, the kinetic contribution was a strong competing separation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning the output of a laser

In a general aspect, a laser system includes a laser and a frequency comb generator system. The laser is configured to generate a laser signal, and the frequency comb generator system is configured to generate a frequency comb based on the laser signal. The frequency comb includes frequency comb signals at respective comb frequencies. The laser system also includes a frequency comb dispersion system configured to spatially separate the frequency comb signals onto respective optical channels of the frequency comb dispersion system. The laser system additionally includes a frequency selector system configured to generate a selected frequency signal from the frequency comb signals after separation. The selected frequency signal includes a target separated frequency comb signal. The laser system also includes a frequency shifter configured to alter the selected frequency signal toward a target output frequency of the laser system.

Liu, Chang↗
DOE OSTI2020

Amorphous fluorinated copolymer gas separation membranes

Membranes having a permselective active layer of a copolymerized perfluorinated monomer and an non-fluorinated alkylvinylester monomer demonstrate superior selective permeability performance for separating gas mixtures compared to membranes of exclusively perfluorinated polymers. Preferred active layer compositions are copolymers of perfluoro-2,2-dimethyl-1,3 dioxole (PDD) copolymerized with an alkylvinyl ester such as vinyl acetate, and vinyl pivalate, and with alkylvinyl esters that are substantially hydrolyzed to provide copolymerized vinyl alcohol functionality. The membranes can have a thin, high diffusion rate, “gutter layer” of a fluorinated polymer highly permeable to nitrogen positioned between the active layer and a porous support layer. A novel copolymer effective in selectively permeable membranes is a copolymer of PDD and an alkylvinyl ester compound having the formula H2C═CHOC(O)R1 in which R1 is a linear or branched alkyl group of from 2 to 5 carbon atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrodialysis through nafion membranes coated with polyelectrolyte multilayers yields >99% pure monovalent ions at high recoveries

Separation of monovalent and multivalent ions is important in processes ranging from water softening to recycling of Li. Previous studies show that cation-exchange membranes coated with multilayer polyelectrolyte films exhibit monovalent/divalent ion selectivities as high as 1000 in electrodialysis (ED) under ideal conditions with low ion recoveries. This work shows that even at 60-80% monovalent-ion recoveries, ED through Nafion membranes coated with protonated poly(allylamine)/poly(4-styrenesulfonate) multilayers can separate equimolar K + and Mg 2+ or Li + and Mg 2+ to give 99.5% pure monovalent ion. Moreover, the use of a low-volume receiving phase allows ED to concentrate the monovalent ion. Typical current efficiencies are around 70% for these separations. Selectivities appear to increase when the membrane-coating procedure uses a higher polyelectrolyte concentration in the deposition solution. Because the limiting current declines with ED time due to depletion of the monovalent ion in the source phase, use of a gradually decreasing applied current enhances current efficiency compared to ED at a constant high current. Further, the membranes also show Li + /Mg 2+ selectivities around 100 when Mg 2+ is in a 20-fold excess in the source phase at an ionic strength of 0.6 M, but selectivity decreases at even higher ionic strengths.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

A Chimeric LBT-GFP Biosensor Exhibits Antithetical Fluorescence Responses to Ca 2+ and Dy 3+ Binding

Rare earth elements (REEs) are critical components in emerging technologies, but their mining and refining processes are often laborious, costly, and environmentally damaging. Developing green and efficient separation methods for REEs is crucial. Biomolecular approaches using lanthanide-binding proteins and peptides show promise for selective REE extraction and separation. In this study, we present the design and characterization of a genetically encoded fluorescence indicator (GEFI) construct that combines a superfolder green fluorescent protein (sfGFP) with a dual lanthanide-binding tag (2×dLBT). The 2×dLBT insert induces conformational changes in sfGFP upon lanthanide binding, modulating the fluorescence intensity. The sfGFP-2×dLBT biosensor exhibited distinct fluorescence responses to different lanthanide ions, with the highest dynamic range observed for heavy REEs like dysprosium (Dy 3+ ). Interestingly, the sensor displayed an antithetical response, where low concentrations of lanthanides initially quenched the fluorescence, but higher concentrations led to a significant fluorescence increase (1.5-fold). The Ca 2+ ion on the other hand showed only a dose-dependent quenching of the fluorescence response. Based on these observations, the biphasic response of the biosensor to lanthanides was eliminated by pretreating the sensor with calcium, which further expanded the dynamic range up to 3-fold for Dy 3+ . The lanthanide-selective and concentration-dependent fluorescence changes of the sfGFP-2×dLBT biosensor demonstrate its potential as a platform for developing specific sensors for various REEs. These sensors could enable rapid and cost-effective determination of REE composition in complex mixtures, facilitating the separation and recovery of critical REEs from electronic waste and other REE-containing sources.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Management of Alkali and Alkaline Earth Fission Products in Used Pyroprocessing Salt

Pyroprocessing of spent nuclear fuel (SNF) involves dissolving metallic fuel into a molten salt electrolyte (typically eutectic LiCl-KCl) and then preferentially depositing actinides onto inert cathodes. Subsequent operations include drawdown of residual actinides and lanthanides from the electrolyte prior to re-using the salt. The recovered actinides are recycled and the recovered lanthanides are disposed as waste. Alkali and alkaline earth metal fission products in the fuel, such as Cs, Sr and Ba, dissolve into the salt during electrorefining. The concentrations of these elements buildup over time in the molten salt electrolyte, which may change the freezing point. The radioactive decay of 137 Cs and 90 Sr (half life 30 and 29 years) generates significant heat and produces strong ionizing radiation fields (β and γ). The increasing heat load and radioactivity as these elements build up in the molten salt requires frequent replacement and disposal of the electrolyte salt. Alternatively, the salt can be treated to remove these and other elements and then recycled to the electrorefiner. An effective strategy to manage these alkali and alkaline earth metal fission products in the molten salt electrolyte would increase the efficiency of pyroprocessing and decrease the volume of salt waste requiring disposal. Alkali and alkaline earth metal fission products are extremely stable in molten salt as chlorides--even more stable than the LiCl-KCl eutectic base salt--making them challenging to remove. They are not removed during drawdown operations to recover residual actinides and lanthanides and a separate operation is required to sufficiently purify the salt for reuse. This work is focused on selecting a method for separating Cs, Sr and Ba from the salt recovered from the lanthanide drawdown operation prior to recycling the cleaned salt back to the electrorefiner. Not addressed in this work is the management of the waste stream produced by the separation. This report summarizes the issues to be addressed when developing removal strategies for cesium, strontium, and barium and reviews existing methods to identify suitable methods and any technological gaps in their application.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Characterizing Olefin Selectivity and Stability of Silver Salts in Ionic Liquids Using Inverse Gas Chromatography

Separation systems utilizing silver(I) ion-olefin complexation have limitations since silver(I) ions can be poisoned or reduced to metallic silver. Ionic liquids (ILs) are used as solvents for silver(I) ions to facilitate separations since their physico-chemical properties can be easily tuned. To develop separation systems with sustainable olefin selectivity, factors that affect silver(I) ion stability need to be understood. In this study, a total of 13 silver salt/IL mixtures were examined by inverse gas chromatography to identify the effects of silver salt anion and IL cation/anion combination on silver(I) ion stability. The effects of temperature and three different exposure gases on silver(I) ion stability were systematically studied. Exposing silver salt/IL mixtures to hydrogen at high temperatures had a greater effect on decreasing silver(I) ion-olefin complexation. Silver(I) ions from the silver bis[(trifluoromethyl)sulfonyl]imide ([NTf 2 – ]) salt were more stable in [NTf 2 – ]-containing ILs than in [BF 4 – ]-containing ILs. Optimum mixtures exhibited high olefin selectivity and were stable beyond 90 h when exposed to hydrogen gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analysis of Hydrocyclone Geometry via Rapid Optimization Based on Computational Fluid Dynamics

Abstract Hydrocyclones exploit density gradients for the centrifugal separation of dispersions in a continuous liquid. Selection of the geometrics for optimal separation is case specific, like the media characteristics. The existing optimization method based on computational fluid dynamics (CFD) provides a powerful analytical tool but requires long computational times. The most common praxis for CFD optimization is via the single‐factor optimization method (SFOM). In this study, a novel approach is presented as an improved rapid optimization method that implements a dynamic‐mesh and user‐defined function optimization method (DUOM). The DUOM adapts the dynamic‐mesh approach from other applications to the optimization analysis of hydrocyclones. The DUOM reduced the computational time by 31.1 %, compared to the SFOM.

Liu, Lin↗
DOE OSTI2021

The PshX subunit of the photochemical reaction center from Heliobacterium modesticaldum acts as a low-energy antenna

The anoxygenic phototrophic bacterium Heliobacterium modesticaldum contains a photochemical reaction center protein complex (called the HbRC) consisting of a homodimer of the PshA polypeptide and two copies of a newly discovered polypeptide called PshX, which is a single transmembrane helix that binds two bacteriochlorophyll g molecules. Here, to assess the function of PshX, we produced a ΔpshX strain of Hbt. modesticaldum by leveraging the endogenous Hbt. modesticaldum Type I-A CRISPR-Cas system to aid in mutant selection. We optimized this system by separating the homologous recombination and CRISPR-based selection steps into two plasmid transformations, allowing for markerless gene replacement. Fluorescence and low-temperature absorbance of the purified HbRC from the wild-type and ΔpshX strains showed that the bacteriochlorophylls bound by PshX have the lowest site energies in the entire HbRC. This indicates that PshX acts as a low-energy antenna subunit, participating in entropy-assisted uphill energy transfer towards the P 800 special bacteriochlorophyll g pair. We further discuss the role that PshX may play in stability of the HbRC, its conservation in other heliobacterial species, and the evolutionary pressure to produce and maintain single-TMH subunits in similar locations in other reaction centers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Substituted polynorbornene membranes: a modular template for targeted gas separations

Polynorbornenes are ideal materials for systematic structure–property investigations designed to correlate gas-transport properties to polymer structure. The modular nature of norbornene-based systems provides a facile route towards the synthesis of diverse polymeric materials. Though many valuable correlations between gas-permeability and polynorbornene structure have been summarized in a prior review (2017), many of these efforts focused heavily on the design of materials with high permeabilities. More recently, the design of next-generation polynorbornene membranes has shifted toward the development of materials that are highly selective for multiple targeted gas separations. Since 2017, tremendous progress has been realized in the preparation of stable and highly selective polynorbornenes for membrane-based gas separations. Examples include polynorbornene derivatives that exhibit very high selectivity for CO 2 /N 2 and light hydrocarbon (e.g., C 3 +/C 1 ) separations, some of which exhibit gas separation performances that approach or exceed the 2008 upper bound. In this work, we summarize prior findings, present recent developments in the field of advanced polynorbornene membrane materials for targeted gas separations, and provide an outlook for the future of this field of research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anionic Surfactants from Reactive Separation of Hydrocarbons Derived from Polyethylene Upcycling

Chemical upcycling of polyethylene (PE) to long-chain alkylaromatics through tandem hydrocracking/aromatization has potential to provide value-added chemicals. However, the liquid product is a complex mixture of alkanes, alkylbenzenes, and polyaromatics, limiting its direct usability. The most valuable component of the product mixture is the alkylbenzenes because of their potential as precursors to anionic surfactants. In this study, a one-pot reactive separation is described. Sulfonating the product mixture from PE upcycling with silica sulfuric acid followed by neutralization with sodium hydroxide yields sodium alkylbenzenesulfonates (up to 93 mol % selectivity), along with a separate phase of lubricant-range hydrocarbons as a coproduct. Compared to petroleum-based sodium dodecylbenzenesulfonates, the reported PE-derived surfactant molecules show competitive physicochemical properties, including surface tension and interfacial tension. According to life cycle assessment, the described reaction strategy demonstrates 20% lower greenhouse gas emissions, when considering uses for the coproducts of PE upcycling, compared to conventional linear alkylbenzenesulfonates (LAS) manufacturing directly from petrochemical feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗