Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “secondary frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Extraordinary frequency stabilization by resonant nonlinear mode coupling

Here, we show that a self-sustained oscillator with a frequency-selective element operating with two nonlinearly coupled modes can achieve a level of frequency stability well beyond that available using single-mode operation. The system of interest consists of a self-sustained oscillator based on a nonlinear primary mode that is coupled via an internal resonance to a passive secondary mode. Analysis of a generic model for this resonance with both additive and multiplicative noises reveals that the stability improvements accrue from two sources: (i) nonlinear frequency veering in the primary mode, a classical analogue to quantum-level repulsion, that eliminates amplitude-to-frequency noise conversion; and (ii) phase cleaning of the oscillator through an intrinsic phase constraint arising from synchronization of the modes. This latter effect can significantly reduce the effects of intrinsic frequency fluctuations of the primary mode, which are not accessible by any known strategy using single-mode operation. The theoretical predictions are supported by experimental measurements of a microelectromechanical systems-based oscillator that demonstrate a reduction in oscillator line width of several orders of magnitude. This approach offers a means of optimizing frequency stability in self-sustained oscillators, which has direct implications for applications in timekeeping and sensing.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Wildfire Emergency Response Hazard Extraction and Analysis of Trends (HEAT) through Natural Language Processing and Time Series

A methodology for Hazard Extraction and Analysis of Trends (HEAT) is proposed and conducted on a data set of wildfire incident response forms, known as ICS-209-PLUS.The HEAT processes: (1) extract a set of hazards from a data set, (2) calculate hazard-relevant metrics in a primary analysis, (3) analyze trends over time in metrics using timeseries, and (4) examine potential explanations for metric trends using a secondary analysis. Hazards are extracted from narrative data in the ICS-209-PLUS based on a framework previously developed by the authors, using natural language processing. Metrics examined for each hazard include operational time to occurrence, rate of occurrence, frequency, and severity. Primary results include a taxonomy of hazards present in the data set with relevant quantitative metrics. The most frequent hazards identified are environmental and include hazardous terrain. Most hazards occur on average between 35-55% containment. Incidents with hazards tend to have a higher average severity score when compared to the average score for all incidents. Time series of the metrics and relevant predictors, including fire characteristics, fire intensity, and operations, are created to facilitate further analysis. Secondary results used to determine which factors best predict hazard frequency include a correlation matrix and regression analysis. These findings are relevant to safety for current, as well as emerging wildfire operations, and are an exploratory first step in developing historical data-driven risk assessment models.

Sequoia R. Andrade↗
NASA NTRS2012

Lunar Precursor Effects in the Solar Wind and Terrestrial Magnetosphere

The two ARTEMIS probes observe significant precursor activity upstream from the Moon, when magnetically connected to the dayside lunar surface. The most common signature consists of high levels of whistler wave activity near half of the electron cyclotron frequency. This precursor activity extends to distances of many thousands of km, in both the solar wind and terrestrial magnetosphere. In the magnetosphere, electrons reflect from a combination of magnetic and electrostatic fields above the lunar surface, forming loss cone distributions. In the solar wind they generally form conics, as a result of reflection from an obstacle moving with respect to the plasma frame (just as at a shock). The anisotropy associated with these reflected electrons provides the free energy source for the whistlers, with cyclotron resonance conditions met between the reflected source population and Moonward-propagating waves. These waves can in turn affect incoming plasma, and we observe significant perpendicular electron heating and plasma density depletions in some cases. In the magnetosphere, we also observe broadband electrostatic modes driven by beams of secondary electrons and/or photoelectrons accelerated outward from the surface. We also occasionally see waves near the ion cyclotron frequency in the magnetosphere. These lower frequency waves, which may result from the presence of ions of lunar origin, modulate the whistlers described above, as well as the electrons. Taken together, our observations suggest that the presence of the Moon leads to the formation of an upstream region analogous in many ways to the terrestrial electron foreshock.

Magnetosphere↗
DOE OSTI2020

Physical Nature of the Eclipsing δ Scuti Star AO Serpentis

We present the absolute properties of the eclipsing binary AO Ser with a pulsating component from our BV photometric and high-resolution spectroscopic observations, which were performed between 2017 April and May. The radial velocities (RVs) for both components were measured, and the effective temperature and projected rotational velocity of the primary star were determined to be T eff,1 = 8,820 ± 62 K and v 1 sini 1 = 90 ± 18 km s -1 , respectively, by comparing the observed spectrum with the Kurucz models. The accurate fundamental parameters of AO Ser were determined by a simultaneous analysis of the light and RV curves. The masses and radii of the primary and secondary components are M 1 = 2.55 ± 0.09 M ⊙ and R 1 = 1.64 ± 0.02 R ⊙ and M 2 = 0.49 ± 0.02 M ⊙ and R 2 = 1.38 ± 0.02 R ⊙ , respectively. Multiple frequency analyses for the eclipse-subtracted light residuals were conducted. As a result, we detected two frequencies of f 1 = 21.852 days -1 and f 2 = 23.484 days -1 . The evolutionary position on the HR diagram and the pulsational characteristics indicate that the primary star is a δ Sct pulsator with a radial fundamental mode. On the other hand, the relatively evolved secondary is oversized for its own mass.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Long-term, non-invasive FTIR detection of low-dose ionizing radiation exposure

Non-invasive methods of detecting radiation exposure show promise to improve upon current approaches to biological dosimetry in ease, speed, and accuracy. Here we developed a pipeline that employs Fourier transform infrared (FTIR) spectroscopy in the mid-infrared spectrum to identify a signature of low dose ionizing radiation exposure in mouse ear pinnae over time. Mice exposed to 0.1 to 2 Gy total body irradiation were repeatedly measured by FTIR at the stratum corneum of the ear pinnae. We found significant discriminative power for all doses and time-points out to 90 days after exposure. Classification accuracy was maximized when testing 14 days after exposure (specificity > 0.9 with a sensitivity threshold of 0.9) and dropped by roughly 30% sensitivity at 90 days. Infrared frequencies point towards biological changes in DNA conformation, lipid oxidation and accumulation and shifts in protein secondary structure. Since only hundreds of samples were used to learn the highly discriminative signature, developing human-relevant diagnostic capabilities is likely feasible and this non-invasive procedure points toward rapid, non-invasive, and reagent-free biodosimetry applications at population scales.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Voltage cycling process for the electroconversion of biomass-derived polyols

Electrification of chemical reactions is crucial to fundamentally transform our society that is still heavily dependent on fossil resources and unsustainable practices. In addition, electrochemistry-based approaches offer a unique way of catalyzing reactions by the fast and continuous alteration of applied potentials, unlike traditional thermal processes. In this work, we show how the continuous cyclic application of electrode potential allows Pt nanoparticles to electrooxidize biomass-derived polyols with turnover frequency improved by orders of magnitude compared with the usual rates at fixed potential conditions. Moreover, secondary alcohol oxidation is enhanced, with a ketoses-to-aldoses ratio increased up to sixfold. The idea has been translated into the construction of a symmetric single-compartment system in a two-electrode configuration. Its operation via voltage cycling demonstrates high-rate sorbitol electrolysis with the formation of H 2 as a desired coproduct at operating voltages below 1.4 V. The devised method presents a potential approach to using renewable electricity to drive chemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

On the importance of excited state species in low pressure capacitively coupled plasma argon discharges

In the past three decades, first principles-based fully kinetic particle-in-cell Monte Carlo collision (PIC/MCC) simulations have been proven to be an important tool for the understanding of the physics of low pressure capacitive discharges. However, there is a long-standing issue that the plasma density determined by PIC/MCC simulations shows quantitative deviations from experimental measurements, even in argon discharges, indicating that certain physics may be missing in previous modeling of the low pressure radio frequency (rf) driven capacitive discharges. In this work, we report that the energetic electron-induced secondary electron emission (SEE) and excited state atoms play an important role in low pressure rf capacitive argon plasma discharges. The ion-induced secondary electrons are accelerated by the high sheath field to strike the opposite electrode and produce a considerable number of secondary electrons that lead to additional ionizing impacts and further increase of the plasma density. Importantly, the presence of excited state species even further enhances the plasma density via excited state neutral and resonant state photon-induced SEE on the electrode surface. The PIC/MCC simulation results show good agreement with the recent experimental measurements in the low pressure range (1–10 Pa) that is commonly used for etching in the semiconductor industry. At the highest pressure (20 Pa) and driving voltage amplitudes 250 and 350 V explored here, the plasma densities from PIC/MCC simulations considering excited state neutrals and resonant photon-induced SEE are quantitatively higher than observed in the experiments, requiring further investigation on high pressure discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1971

A note on the acceleration phase of high-energy particles in the solar flare on 7 July, 1966.

The acceleration phase of solar cosmic rays and relativistic electrons is studied on the basis of the observational data available on the optical, radio, X-ray, and particle events associated with the solar flare that occurred on July 7, 1966. The generating process of hydromagnetic shock waves which excited the type-II radio burst detected at a frequency below about 100 MHz is also discussed. The results of the study suggest that no secondary acceleration process after the explosive phase can contribute much to the generation of high energy particles. The ejection of solar cosmic rays and relativistic electrons seems to be related to the expansion of the magnetic bulge which can trap accelerated electrons from the triggering region of solar flares.

Sakurai, K.↗
NASA NTRS1975

Crater studies in the Apollo 17 region

As part of crater analysis in the Apollo 17 region, cumulative size-frequency curves were constructed, the density distribution of small craters was determined, and the effects of secondary crater clusters near the landing site were studied. The cumulative curves indicate that the old dark-mantled mare is similar in age to Apollo 11 mare, and that the adjacent young light mare of Central Serenitatis is similar in age to Apollo 15 mare. The old dark-mantled surface is markedly deficient in craters between 100 and 200 m in diameter, and the analysis suggests that this deficiency is a consequence of the old dark mantle which gives rise to an unusually thick unconsolidated layer that causes abnormally rapid degradation of small craters.

Lucchitta, B. K.↗
NASA NTRS1980

Visual and postural motion aftereffects following parabolic flight

Postural and visual motion aftereffects may be experienced after exposure to alternating periods of free fall and increased gravitoinertial force in parabolic flight. In an aftereffect, the body feels as if it is again undergoing periodic changes in force level because of motion of the substrate; strong apparent postural motion is also accompanied by visual motion of the surroundings. The aftereffects are discussed according to: (1) their character, (2) their time course, (3) secondary symptoms associated with them, (4) conditions favoring their occurrence, (5) their relation to the inducing frequency, (6) fragments of the complete pattern, (7) their duration, and (8) the importance of contact cues.

Lackner, J. R.↗
NASA NTRS2012

Algorithm for Simulating Atmospheric Turbulence and Aeroelastic Effects on Simulator Motion Systems

Atmospheric turbulence produces high frequency accelerations in aircraft, typically greater than the response to pilot input. Motion system equipped flight simulators must present cues representative of the aircraft response to turbulence in order to maintain the integrity of the simulation. Currently, turbulence motion cueing produced by flight simulator motion systems has been less than satisfactory because the turbulence profiles have been attenuated by the motion cueing algorithms. This report presents a new turbulence motion cueing algorithm, referred to as the augmented turbulence channel. Like the previous turbulence algorithms, the output of the channel only augments the vertical degree of freedom of motion. This algorithm employs a parallel aircraft model and an optional high bandwidth cueing filter. Simulation of aeroelastic effects is also an area where frequency content must be preserved by the cueing algorithm. The current aeroelastic implementation uses a similar secondary channel that supplements the primary motion cue. Two studies were conducted using the NASA Langley Visual Motion Simulator and Cockpit Motion Facility to evaluate the effect of the turbulence channel and aeroelastic model on pilot control input. Results indicate that the pilot is better correlated with the aircraft response, when the augmented channel is in place.

Ercole, Anthony V.↗
NASA NTRS2013

Resolution of Forces and Strain Measurements from an Acoustic Ground Test

The Conservatism in Typical Vibration Tests was Demonstrated: Vibration test at component level produced conservative force reactions by approximately a factor of 4 (approx.12 dB) as compared to the integrated acoustic test in 2 out of 3 axes. Reaction Forces Estimated at the Base of Equipment Using a Finite Element Based Method were Validated: FEM based estimate of interface forces may be adequate to guide development of vibration test criteria with less conservatism. Element Forces Estimated in Secondary Structure Struts were Validated: Finite element approach provided best estimate of axial strut forces in frequency range below 200 Hz where a rigid lumped mass assumption for the entire electronics box was valid. Models with enough fidelity to represent diminishing apparent mass of equipment are better suited for estimating force reactions across the frequency range. Forward Work: Demonstrate the reduction in conservatism provided by; Current force limited approach and an FEM guided approach. Validate proposed CMS approach to estimate coupled response from uncoupled system characteristics for vibroacoustics.

Smith, Andrew M.↗
NASA NTRS2015

Integrated Physics-based Modeling and Experiments for Improved Prediction of Combustion Dynamics in Low-Emission Systems

Concurrent simulation and experiment was undertaken to assess the ability of a hybrid RANS-LES model to predict combustion dynamics in a single-element lean direct-inject (LDI) combustor showing self-excited instabilities. High frequency pressure modes produced by Fourier and modal decomposition analysis were compared quantitatively, and trends with equivalence ratio and inlet temperature were compared qualitatively. High frequency OH PLIF and PIV measurements were also taken. Submodels for chemical kinetics and primary and secondary atomization were also tested against the measured behavior. For a point-wise comparison, the amplitudes matched within a factor of two. The dependence on equivalence ratio was matched. Preliminary results from simulation using an 18-reaction kinetics model indicated instability amplitudes closer to measurement. Analysis of the simulations suggested a band of modes around 1400 Hz were due to a vortex bubble breakdown and a band of modes around 6 kHz were due to a precessing vortex core hydrodynamic instability. The primary needs are directly coupled and validated ab initio models of the atomizer free surface flow and the primary atomization processes, and more detailed study of the coupling between the 3D swirling flow and the local thermoacoustics in the diverging venturi section.

combustion↗
NASA NTRS2023

A New View of the Lunar South Pole from the Lunar Orbiter Laser Altimeter (LOLA)

Upcoming missions to the lunar south pole require detailed maps over large areas to fully characterize landing sites locally and regionally and to place their data into proper geologic context. To that end, we enhanced the Lunar Orbiter Laser Altimeter (LOLA) altimetry dataset for the south polar region, from which we produced new maps of topography, topographic roughness, and permanently shadowed regions (PSRs). The roughness maps reveal a diversity of terrains characterized by hectometer-scale roughness which is controlled in this region primarily by cratering and downslope mass transport. The south polar region is littered with linear roughness features of order ~1 – 10 km wide and ~10s – 100s of km long hypothesized to be secondary impacts within extended ejecta rays. Non uniformities in these features could reflect variations in secondary impactor properties and/or target terrain properties. Poleward of 80° S, the PSR cumulative size-frequency distribution (CSFD) shows an approximately power-law behavior whose exponent has a spatial variation of ~10%. PSRs with areas < 1 km2 contain 15 ± 5% of the total PSR area. Finally, we studied the effect of false positives and false negatives on the accuracy of the measured PSR cumulative size-frequency distribution (CSFD) and on the area for any individual PSR. The new maps presented here have many applications in the science and exploration of the lunar south polar region, such as geologic mapping and traverse planning.

Michael K. Barker↗
NASA NTRS1993

SSF loads and controllability during assembly

The Orbiter Primary Reaction Control System (PRCS) pulse width and firing frequency is restricted to prevent excessive loads in the Space Station Freedom (SSF). The feasibility of using the SSF Control Moment Gyros (CMG) as a secondary controller for load relief is evaluated. The studies revealed the CMG not only reduced loads but were useful for other SSF functions: vibration suppression and modal excitation. Vibration suppression lowers the g level for the SSF micro-g experiments and damps the low frequency oscillations that cause crew sickness. Modal excitation could be used for the modal identification experiment and health monitoring. The CMG's reduced the peak loads and damped the vibrations. They were found to be an effective multi-purpose ancillary device for SSF operation.

Larson, Charles R.↗
DOE OSTI2022

Meteorological Influences on Anthropogenic PM 2.5 in Future Climates: Species Level Analysis in the Community Earth System Model v2

Abstract Biomass and fossil fuel burning impact air quality by injecting fine particulate matter (PM 2.5 ) and its precursors into the atmosphere, which poses serious threats to human health. However, the surface concentration of PM 2.5 depends not only on the magnitude of emissions, but also secondary production, transport, and removal. For example, in response to greenhouse gas driven warming, meteorological conditions that govern aerosol removal, primarily through rainfall and wet deposition, could shift in pattern, frequency, and intensity. This climate change driven process can impact air quality even without changes in aerosol emissions. In this experiment, we conduct new simulations by fixing aerosol emissions at present‐day levels in the Community Earth System Model Version 2, but increasing greenhouse gases through the 21st century. In our results, the changes in patterns and intensity of PM 2.5 are found to be associated with precipitation (via aerosol removal), temperature (via secondary organic aerosol (SOA) formation), and moisture and clouds (via sulfate production). A decrease in wet day frequency (∼1.2% global mean) contributes to increases in the surface concentrations of black carbon, primary organic matter, and sulfate in many regions. This is offset in some regions by an upward vertical shift in the level where SOA forms, which contributes to higher column burden but lower surface concentration. These results highlight a need, using a variety of modeling tools, to continually reassess aerosol emissions regulations in response to anticipated climate changes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2012

Design and Performance of a Wideband Radio Telescope

The Goldstone Apple Valley Radio Telescope (GAVRT) is an outreach project, a partnership involving NASA's Jet Propulsion Laboratory (JPL), the Lewis Center for Educational Research (LCER), and the Apple Valley Unified School District near the NASA Goldstone deep space communication complex. This educational program currently uses a 34-meter antenna, DSS12, at Goldstone for classroom radio astronomy observations via the Internet. The current program utilizes DSS12 in two narrow frequency bands around S-band (2.3 GHz) and X-band (8.45 GHz), and is used by a training program involving a large number of secondary school teachers and their classrooms. To expand the program, a joint JPL/LCER project was started in mid-2006 to retrofit an additional existing 34-meter beam-waveguide antenna, DSS28, with wideband feeds and receivers to cover the 0.5-to- 14-GHz frequency bands. The DSS28 antenna has a 34-meter diameter main reflector, a 2.54-meter subreflector, and a set of beam waveguide mirrors surrounded by a 2.43-meter tube. The antenna was designed for high power and a narrow frequency band around 7.2 GHz. The performance at the low end of the frequency band desired for the educational program would be extremely poor if the beam waveguide system was used as part of the feed system. Consequently, the 34-meter antenna was retrofitted with a tertiary offset mirror placed at the vertex of the main reflector. The tertiary mirror can be rotated to use two wideband feeds that cover the 0.5-to-14-GHz band. The earlier designs for both GAVRT and the DSN only used narrow band feeds and consequently, only covered a small part of the S- and X-band frequencies. By using both a wideband feed and wideband amplifiers, the entire band from 0.5 to 14 GHz is covered, expanding significantly the science activities that can be studied using this system.

Weinreb, Sander↗
NASA NTRS2000

Model for radial dependence of frequency distributions for energy imparted in nanometer volumes from HZE particles

This paper develops a deterministic model of frequency distributions for energy imparted (total energy deposition) in small volumes similar to DNA molecules from high-energy ions of interest for space radiation protection and cancer therapy. Frequency distributions for energy imparted are useful for considering radiation quality and for modeling biological damage produced by ionizing radiation. For high-energy ions, secondary electron (delta-ray) tracks originating from a primary ion track make dominant contributions to energy deposition events in small volumes. Our method uses the distribution of electrons produced about an ion's path and incorporates results from Monte Carlo simulation of electron tracks to predict frequency distributions for ions, including their dependence on radial distance. The contribution from primary ion events is treated using an impact parameter formalism of spatially restricted linear energy transfer (LET) and energy-transfer straggling. We validate our model by comparing it directly to results from Monte Carlo simulations for proton and alpha-particle tracks. We show for the first time frequency distributions of energy imparted in DNA structures by several high-energy ions such as cosmic-ray iron ions. Our comparison with results from Monte Carlo simulations at low energies indicates the accuracy of the method.

Non-NASA Center↗