Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scientific discovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Smooth, homogeneous, high-purity Nb 3 Sn superconducting RF resonant cavity by seed-free electrochemical synthesis

Abstract Workbench-size particle accelerators, enabled by Nb 3 Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and x-rays. Thin-film Nb 3 Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb 3 Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb 3 Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb 3 Sn by five times compared to typical vapor-diffused Nb 3 Sn. Quantitative mappings using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb 3 Sn. We have successfully applied this Nb 3 Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb 3 Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations.

Physics↗
DOE OSTI2024

Technological developments and accelerator improvements for the FRIB beam power ramp-up

The Facility for Rare Isotope Beams (FRIB) began operation with 1 kW beam power for scientific users in May 2022 upon completion of 8 years of project construction. The ramp-up to the ultimate beam power of 400 kW, planned over a 6-year period, will enable the facility to reach its full potential for scientific discovery in isotope science and applications. In December 2023, a record-high beam power of 10.4 kW uranium was delivered to the target. Technological developments and accelerator improvements are being made over the entire facility and are key to completion of the power ramp-up. Major technological developments entail the phased deployment of high-power beam-intercepting systems, including the charge strippers, the charge selection systems, the production target, and the beam dump, along with support systems, including non-conventional utilities (NCU) and remote handling facilities. Major accelerator improvements include renovations to aging legacy systems associated with experimental beam lines and system automation for improved operational efficiency and better machine availability. Experience must be gained to safely handle the increased radiological impacts associated with high beam power; extensive machine studies and advanced beam tuning procedures are needed to minimize uncontrolled beam losses for the desired operating conditions. This paper discusses the technological developments and accelerator improvements with emphasis on major R&D efforts.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Roadmap on methods and software for electronic structure based simulations in chemistry and materials

This Roadmap article provides a succinct, comprehensive overview of the state of electronic structure methods and software for molecular and materials simulations. Seventeen distinct sections collect insights by 51 leading scientists in the field. Each contribution addresses the status of a particular area, as well as current challenges and anticipated future advances, with a particular eye towards software related aspects and providing key references for further reading. Foundational sections cover density functional theory and its implementation in real-world simulation frameworks, Green's function based many-body perturbation theory, wave-function based and stochastic electronic structure approaches, relativistic effects and semiempirical electronic structure theory approaches. Subsequent sections cover nuclear quantum effects, real-time propagation of the electronic structure, challenges for computational spectroscopy simulations, and exploration of complex potential energy surfaces. The final sections summarize practical aspects, including computational workflows for complex simulation tasks, the impact of current and future high-performance computing architectures, software engineering practices, education and training to maintain and broaden the community, as well as the status of and needs for electronic structure based modeling from the vantage point of industry environments. Overall, the field of electronic structure software and method development continues to unlock immense opportunities for future scientific discovery, based on the growing ability of computations to reveal complex phenomena, processes and properties that are determined by the make-up of matter at the atomic scale, with high precision.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Bayesian experimental design and parameter estimation for ultrafast spin dynamics

Abstract Advanced experimental measurements are crucial for driving theoretical developments and unveiling novel phenomena in condensed matter and materials physics, which often suffer from the scarcity of large-scale facility resources, such as x-ray or neutron scattering centers. To address these limitations, we introduce a methodology that leverages the Bayesian optimal experimental design paradigm to efficiently uncover key quantum spin fluctuation parameters from x-ray photon fluctuation spectroscopy (XPFS) data. Our method is compatible with existing theoretical simulation pipelines and can also be used in combination with fast machine learning surrogate models in the event that real-time simulations are unfeasible. Our numerical benchmarks demonstrate the superior performance in predicting model parameters and in delivering more informative measurements within limited experimental time. Our method can be adapted to many different types of experiments beyond XPFS and spin fluctuation studies, facilitating more efficient data collection and accelerating scientific discoveries.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Electric field control of magnetism

Electric field control of magnetism is an extremely exciting area of research, from both a fundamental science and an applications perspective and has the potential to revolutionize the world of computing. To realize this will require numerous further innovations, both in the fundamental science arena as well as translating these scientific discoveries into real applications. Thus, this article will attempt to bridge the gap between condensed matter physics and the actual manifestations of the physical concepts into applications. We have attempted to paint a broad-stroke picture of the field, from the macroscale all the way down to the fundamentals of spin–orbit coupling that is a key enabler of the physics discussed. Here, we hope it will help spur more translational research within the broad materials physics community. Needless to say, this article is written on behalf of a large number of colleagues, collaborators and researchers in the field of complex oxides as well as current and former students and postdocs who continue to pursue cutting-edge research in this field.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exascale applications: skin in the game

As noted in Wikipedia, skin in the game refers to having ‘incurred risk by being involved in achieving a goal’, where ‘ skin is a synecdoche for the person involved, and game is the metaphor for actions on the field of play under discussion’. For exascale applications under development in the US Department of Energy Exascale Computing Project, nothing could be more apt, with the skin being exascale applications and the game being delivering comprehensive science-based computational applications that effectively exploit exascale high-performance computing technologies to provide breakthrough modelling and simulation and data science solutions. These solutions will yield high-confidence insights and answers to the most critical problems and challenges for the USA in scientific discovery, national security, energy assurance, economic competitiveness and advanced healthcare. This article is part of a discussion meeting issue ‘Numerical algorithms for high-performance computational science’.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Designing and Utilizing Material Acceleration Platforms: Need for Workforce Development

In the quest to accelerate scientific discovery, the materials science field is rapidly moving toward the implementation of robotics and artificial intelligence driven workflows. Our recent summer school “Future Labs: Robotic Synthesis Coupled with Machine Learning for Energy Materials” provided learning opportunities for students, researchers, and educators in the materials science community. We describe this experience and provide our perspective on which new directions could be pursued to enable the future workforce to acquire cross-disciplinary skills.

Educational policy↗
DOE OSTI2021

Modern and Future Colliders

Since the initial development of charged particle colliders in the middle of the 20th century, these advanced scientific instruments have been at the forefront of scientific discoveries in high energy physics over the past 60 years. Collider accelerator technology and beam physics have progressed immensely and modern facilities now operate at energies and luminosities many orders of magnitude greater than the pioneering colliders of the early 1960s. In addition, the field of colliders remains extremely dynamic and continues to develop many innovative approaches. Indeed, several novel concepts are currently being considered for designing and constructing even more powerful future colliders. In this paper, we first review the colliding beam method and the history of colliders, and then present, in detail, the major achievements of operational machines and the key features of near-term collider projects that are currently under development. We conclude with an analysis of numerous proposals and studies for far-future colliders. The evaluation of their respective potentials reveals tantalizing prospects for further significant breakthroughs in the collider field.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Colloquium : Machine learning in nuclear physics

We report advances in machine learning methods provide tools that have broad applicability in scientific research. These techniques are being applied across the diversity of nuclear physics research topics, leading to advances that will facilitate scientific discoveries and societal applications. This Review gives a snapshot of nuclear physics research which has been transformed by machine learning techniques.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Privacy-Preserving Federated Learning for Science: Challenges and Research Directions

This paper discusses the key challenges and future research directions for privacy-preserving federated learning (PPFL), with a focus on its application to large-scale scientific AI models, in particular, foundation models~(FMs). PPFL enables collaborative model training across distributed datasets while preserving privacy-- an important collaborative approach for science. We discuss the need for efficient and scalable algorithms to address the increasing complexity of FMs, particularly when dealing with heterogeneous clients. In addition, we underscore the need for developing advance privacy-preserving techniques, such as differential privacy, to balance privacy and utility in large FMs emphasizing fairness and incentive mechanisms to ensure equitable participation among heterogeneous clients. Finally, we emphasize the need for a robust software stack supporting scalable and secure PPFL deployments across multiple high-performance computing facilities. We envision that PPFL would play a crucial role to advance scientific discovery and enable large-scale, privacy-aware collaborations across science domains.

Kim, Kibaek [Argonne National Laboratory (ANL)]↗
DOE OSTI2024

Transient Optimization of the Cryogenic Moderator System Controller at the Spallation Neutron Source for Improved Performance

The high-energy neutron beam generated at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is moderated to use cold (slow) neutrons for scientific discoveries. The Cryogenic Moderator System (CMS) removes heat from the neutron beam using cryogenic hydrogen (H 2 ) moderators connected via heat exchangers to a helium (He) refrigeration loop that dissipates heat using a compressor-brake system. However, the CMS is affected by sporadic losses in beam power, referred to as "beam trips," as these events generate significant disturbances in cooling requirements. To accommodate the heat load transients during beam trips, the CMS uses a decentralized control strategy consisting of four flow valves and one electric heater adjusted by independent proportional-integral (PI) controllers. During the CMS’s initial commissioning, the PI gains were calibrated based only on tracking performance, overlooking their effectiveness in disturbance rejection. A data-driven, control-oriented closed-loop model was developed to recalibrate the PI gains and minimize the transient disturbances caused by beam trips. The model consists of three main components: (1) a physics-based model of the He refrigeration loop, (2) a machine-learning model of the cryogenic H 2 cooling trains, and (3) the control logic used for feedback set-point tracking. Experimental results showed that the recalibrated gains obtained in this study improved the CMS’s transient response during beam trips.

Maldonado Puente, Bryan↗
DOE OSTI2022

Hybrid Analysis of Fusion Data for Online Understanding of Complex Science on Extreme Scale Computers

The current practice for fusion scientists running first principle simulations on high performance computing plat-forms is to either run their simulations and output their data for post-hoc analysis, or to place in situ analytics into their code. In this paper we examine a complex workflow using XGC fusions simulation run on the Oak Ridge Leadership Computing Facility's supercomputer Summit, which also involve three anal-yses as part of the results necessary for scientific discovery. We discuss the challenges faced when implementing these algorithms and present an original hybrid staging technique to help enable the physicists to make discoveries during the execution of the simulation. By creating this infrastructure, we can examine complicated physics results, which may not have been possible without the infrastructure. For example, our work enables the online visualization of turbulent homoclinic tangle around the magnetic X-point, breaking the last confinement surface. This visualization could help fusion scientists to better understand and improve the turbulence spread of plasma exhaust heat, which is crucial toward realizing plasmas beyond the currently accessible physics regimes of present-day tokamak reactors. The physics of turbulent homoclinic tangle will be reported in a future physics publication, by utilizing the original online analysis/visualization framework presented in this paper.

Suchyta, Eric↗
DOE OSTI2022

Hvac: Removing I/O Bottleneck for Large-Scale Deep Learning Applications

Scientific communities are increasingly adopting deep learning (DL) models in their applications to accelerate scientific discovery processes. However, with rapid growth in the computing capabilities of HPC supercomputers, large-scale DL applications have to spend a significant portion of training time performing I/O to a parallel storage system. Previous research works have investigated optimization techniques such as prefetching and caching. Unfortunately, there exist non-trivial challenges to adopting the existing solutions on HPC supercomputers for large-scale DL training applications, which include non-performance and/or failures at extreme scale, lack of portability and generality in design, complex deployment methodology, and being limited to a specific application or dataset. To address these challenges, we propose High-Velocity AI Cache (HVAC), a distributed read-cache layer that targets and fully exploits the node-local storage or near node-local storage technology. HVAC seamlessly accelerates read I/O by aggregating node-local or near node-local storage, avoiding metadata lookups and file locking while preserving portability in the application code. We deploy and evaluate HVAC on 1,024 nodes (with over 6000 NVIDIA V100 GPUS) of the Summit supercomputer. In particular, we evaluate the scalability, efficiency, accuracy, and load distribution of HVAC compared to GPFS and XFS-on-NVMe. With four different DL applications, we observe an average 25 % performance improvement atop GPFS and 9% drop against XFS-on-NVMe, which scale linearly and are considered the performance upper bound. We envision HVAC as an important caching library for upcoming HPC supercomputers such as Frontier.

Khan, Awais↗
DOE OSTI2023

Spatiotemporally Adaptive Compression for Scientific Dataset with Feature Preservation – A Case Study on Simulation Data with Extreme Climate Events Analysis

Scientific discoveries are increasingly constrained by limited storage space and I/O capacities. For time-series simulations and experiments, their data often need to be decimated over timesteps to accommodate storage and I/O limitations. In this paper, we propose a technique that addresses storage costs while improving post-analysis accuracy through spatiotemporal adaptive, error-controlled lossy compression. We investigate the trade-off between data precision and temporal output rates, revealing that reducing data precision and increasing timestep frequency lead to more accurate analysis outcomes. Additionally, we integrate spatiotemporal feature detection with data compression and demonstrate that performing adaptive error-bounded compression in higher dimensional space enables greater compression ratios, leveraging the error propagation theory of a transformation-based compressor. To evaluate our approach, we conduct experiments using the well-known E3SM climate simulation code and apply our method to compress variables used for cyclone tracking. Our results show a significant reduction in storage size while enhancing the quality of cyclone tracking analysis, both quantitatively and qualitatively, in comparison to the prevalent timestep decimation approach. Compared to three state-of-the-art lossy compressors lacking feature preservation capabilities, our adaptive compression framework improves perfectly matched cases in TC tracking by 26.4-51.3% at medium compression ratios and by 77.3-571.1% at large compression ratios, with a merely 5–11% computational overhead.

Gong, Qian↗
DOE OSTI2023

Efficient Asynchronous I/O with Request Merging

With the advancement of exascale computing, the amount of scientific data is increasing day by day. Efficient data access is necessary for scientific discoveries. Unfortunately, the I/O performance is not improved, like the CPU and network speed. So, I/O operations take longer time than data generation or analysis. Asynchronous I/O has been proposed to extenuate the I/O bottleneck by overlapping I/O and computation time. However, multiple small write operations can diminish the benefits of asynchronous I/O, as the I/O time becomes significantly longer than the compute time, with little time to overlap with. To overcome these issues, we present an optimization technique to merge small contiguous write operations. We integrated our solution into the HDF5 asynchronous I/O VOL connector and demonstrated the effectiveness of merging HDF5 write operations automatically and transparently without requiring any code change from the application.

Chowdhury, Kamal Hossain↗
DOE OSTI2024

Toward a Holistic Performance Evaluation of Large Language Models Across Diverse AI Accelerators

Artificial intelligence (AI) methods have become critical in scientific applications to help accelerate scientific discovery. Large language models (LLMs) are being considered a promising approach to address some challenging problems because of their superior generalization capabilities across domains. The effectiveness of the models and the accuracy of the applications are contingent upon their efficient execution on the underlying hardware infrastructure. Specialized Al accelerator hardware systems have recently become available for accelerating Al applications. However, the comparative performance of these AI accelerators on large language models has not been previously studied. In this paper, we systematically study LLMs on multiple AI accelerators and GPUs and evaluate their performance characteristics for these models. We evaluate these systems with (i) a micro-benchmark using a core transformer block, (ii) a GPT-2 model, and (iii) an 1,I,M-driven science use case, GenSLM. We present our findings and analyses of the models' performance to better understand the intrinsic capabilities of AI accelerators. Furthermore, our analysis takes into account key factors such as sequence lengths, scaling behavior, and sensitivity to gradient accumulation steps.

Emani, Murali↗
DOE OSTI2024

A Science Gateway for the Repeatable Analysis of Machine Learning Predicted Gravity Anomalies

In recent years, deep learning has become an increasingly popular alternative for modeling in geoscience applications due to its scalability and efficiency. However, the interpretability, compute, data volume, and hyperparameter tuning requirements of deep learning models make development and monitoring difficult. Furthermore, model explainability and communicating results obtained by these models to users or domain experts is a challenge, as domain experts in geoscience also need to have a deep understanding of how those models function in order to support their scientific works. Here, we describe a science gateway and machine learning pipeline for predicting gravity anomalies from geophysical data. The gateway, built on open-source technologies, provides a holistic view of the pipeline through interactive visualizations aimed at enabling efficient exploratory data analysis. The repeatability, reproducibility, and monitoring capabilities of this overall system allow us to iterate and analyze at scale. Using this pipeline and gateway, we can repeatedly produce accurate high-resolution gravity anomaly datasets. By describing the underlying technologies, implementation, and results, here we provide a foundation for the broader adoption of science gateways into cross-cutting geoscience and machine learning research projects as a means to improve the scientific discovery and collaboration in the geophysics and computational sciences community.

58 GEOSCIENCES↗
DOE OSTI2021

Characterizing Machine Learning I/O Workloads on Leadership Scale HPC Systems

High performance computing (HPC) is no longer solely limited to traditional workloads such as simulation and modeling. With the increase in the popularity of machine learning (ML) and deep learning (DL) technologies, we are observing that an increasing number of HPC users are incorporating ML methods into their workflow and scientific discovery processes, across a wide spectrum of science domains such as biology, earth science, and physics. This gives rise to a diverse set of I/O patterns than the traditional checkpoint/restart-based HPC I/O behavior. The details of the I/O characteristics of such ML I/O workloads have not been studied extensively for large-scale leadership HPC systems. This paper aims to fill that gap by providing an in-depth analysis to gain an understanding of the I/O behavior of ML I/O workloads using darshan - an I/O characterization tool designed for lightweight tracing and profiling. We study the darshan logs of more than 23, 000 HPC ML I/O jobs over a time period of one year running on Summit - the second-fastest supercomputer in the world. This paper provides a systematic I/O characterization of ML I/O jobs running on a leadership scale supercomputer to understand how the I/O behavior differs across science domains and the scale of workloads, and analyze the usage of parallel file system and burst buffer by ML I/O workloads.

Paul, Arnab↗