Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Fatigue damage mechanisms in boron-aluminium composite laminates

The relationship between fatigue and shakedown in metal matrix composites is investigated theoretically and experimentally for unidirectional and laminated 6061 Al-B materials. It is shown that no fatigue damage takes place if the applied stress range is such that the material remains elastic, or shakes down, i.e., resumes elastic cyclic straining after a small number of plastic strain cycles. Fatigue damage occurs only in specimens subjected to stress ranges which cause sustained cyclic plastic straining in the aluminum matrix. If the applied stress range is smaller than that required for fatigue failure, after about 10 to the 6th cycles a saturation damage state is reached which remains essentially unchanged with increasing number of cycles.

Dvorak, G. J.↗

Development of advanced Czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness

The process development continued, with a total of nine crystal growth runs. One of these was a 150 kg run of 5 crystals of approximately 30 kg each. Several machine and process problems were corrected and the 150 kg run was as successful as previous long runs on CG2000 RC's. The accelerated recharge and growth will be attempted when the development program resumes at full capacity in FY '82. The automation controls (Automatic Grower Light Computer System) were integrated to the seed dip temperature, shoulder, and diameter sensors on the CG2000 RC development grower. Test growths included four crystals, which were grown by the computer/sensor system from seed dip through tail off. This system will be integrated on the Mod CG2000 grower during the next quarter. The analytical task included the completion and preliminary testing of the gas chromatograph portion of the Furnace Atmosphere Analysis System. The system can detect CO concentrations and will be expanded to oxygen and water analysis in FY '82.

Source record↗

Genetic engineering possibilities for CELSS: A bibliography and summary of techniques

A bibliography of the most useful techniques employed in genetic engineering of higher plants, bacteria associated with plants, and plant cell cultures is provided. A resume of state-of-the-art genetic engineering of plants and bacteria is presented. The potential application of plant bacterial genetic engineering to CELSS (Controlled Ecological Life Support System) program and future research needs are discussed.

Johnson, E. J.↗

Reusable captive blind fastener

A one piece reusable fastener capable of joining materials together from one side (blind backside) comprises a screw driven pin ending in a wedge-shaped expander cone. The cone cooperates within a slotted collar end which has a number of tangs on a cylindrical body. The fastener is set by inserting it through aligned holes in the workpieces to be joined. Turning the pin in one direction draws the cone into the collar, deforming the tangs radially outward to mate with tapered back-tapered hold in the workpiece, thus fastening the two pieces together. Reversing the direction of the pin withdraws the cone from the collar, and allows the tangs to resume their contracted configuration without withdrawing the fastener from the insertion hole. The fastener is capable of joining materials together from only one side with substantial strength in tension and shear over many resue attachment cycles, with no special operations on the main assembly parts other than the tapering of the back end of the insertion hole.

Peterson, S. A.↗

The in-flight performance of the Solar Maximum Mission Electrical Power System

Circuitry, power handling, and operational characteristics and anomalies of the Electrical Power System (EPS) of the Solar Maximum Mission are discussed. The EPS is designed as a standard unit to be a candidate for use on future space missions. Blown, improperly derated fuses in the Attitude Control System and the Signal Conditioning Assembly have led to switching to magnetrons for solar angle, with a loss of accuracy, and a loss of one-half of telemetry data, respectively. In addition, reasons for an 11-14% degradation of solar array output are uncertain due to the loss of precise attitude control. Current surges to peak at 76.5 A (down from 94.5 A) at sunrise, stays for four to five minutes, then resumes nominal output for the remainder of the 61-68 daytime period. Eclipse varies between 28 and 35 minutes, with corresponding depth of discharge of 14%. The batteries charge at 20 A, and although an overcharge mode has been continuously sensed, operation has been normal and temperature sensors have not indicated overcharge; cell failure has also not been sensed. The system has a two year design life and a desired life of four years.

Broderick, R. J.↗

Flat-plate collector research area: Silicon material task

Silane decomposition in a fluidized-bed reactor (FBR) process development unit (PDU) to make semiconductor-grade Si is reviewed. The PDU was modified by installation of a new heating system to provide the required temperature profile and better control, and testing was resumed. A process for making trichlorosilane by the hydrochlorination of metallurgical-grade Si and silicon tetrachloride is reported. Fabrication and installation of the test system employing a new 2-in.-dia reactor was completed. A process that converts trichlorosilane to dichlorosilane (DCS), which is reduced by hydrogen to make Si by a chemical vapor deposition step in a Siemens-type reactor is described. Testing of the DCS PDU integraled with Si deposition reactors continued. Experiments in a 2-in.-dia reactor to define the operating window and to investigate the Si deposition kinetics were completed.

Lutwack, R.↗

Design and evaluation of a fault-tolerant multiprocessor using hardware recovery blocks

A fault-tolerant multiprocessor with a rollback recovery mechanism is discussed. The rollback mechanism is based on the hardware recovery block which is a hardware equivalent to the software recovery block. The hardware recovery block is constructed by consecutive state-save operations and several state-save units in every processor and memory module. When a fault is detected, the multiprocessor reconfigures itself to replace the faulty component and then the process originally assigned to the faulty component retreats to one of the previously saved states in order to resume fault-free execution. A mathematical model is proposed to calculate both the coverage of multi-step rollback recovery and the risk of restart. A performance evaluation in terms of task execution time is also presented.

Lee, Y. H.↗

Some results from studies on the effects of weightlessness on the growth of epiphytic orchids

Epidendrum orchids were placed in a Malakhit-2 micro-greenhouse aboard the Soyuz-36-Salyut-6 space station to test their growth under weightless conditions. Growth occurred but was less than in control plants left on Earth; cells were smaller and parenchymal development slowed in all tissues. Stems, roots, and leaves were smaller. The number of stomas on the leaves was about the same as in the controls, but, because of the smaller leaf size, there were more per unit area. A modeling experiment using a clinostat revealed a large decrease in gibberellin activity and auxin activity. It was assumed that weightlessness primarily affects gibberellin biosynthesis, inhibiting cell growth. Reestablishment of growth compound activity upon return of the plants to Earth was indicated by the fact that the orchids resumed growth thereafter.

Cherevchenko, T. M.↗

A large-amplitude photometric periodicity on a T Tauri star

B, V, and R light curvea are presented for the years 1970-1972, during whith the T Tauri star SY Chamaeleontis was observed to undergo precisely periodic brightness oscillations with a 1.6 mag B amplitude and a 6.129-day period. While SY Cha has shown small amplitude irregular variability since 1901, and in 1971 exhibited a sinusoidal light curve in the 13.4-14.2 mag range, this range was found to increase during 1971-1972 to 12.76-14.34 mag. Between 1973 and 1978, the odd behavior pattern was resumed. It is suggested that a localized bright spot formed on, or near, the surface of SY Cha, and that stellar rotation has caused the spot to appear and disapear from the vantage point of the earth.

Schaefer, B. E.↗

Density of liquid Hg(1-x)Cd(x)Te

Negative thermal expansion has been established in liquid Hg(1-x)Cd(x)Te for x less than 0.2 employing a pycnometric method. Pure HgTe increases in density from its melting point at 670 C to a maximum value at 750 C, where normal thermal expansion progressively resumes. The dependence of density on temperature for liquid Hg(1-x)Cd(x)Te arises almost exclusively from the HgTe portion of the melt, while CdTe acts as a diluent. The temperature corresponding to the maximum density changes slightly with composition, increasing by about 5 C for x = 0.1.

Chandra, D.↗

Spinoff, 1984

A pictorial resume that underlines the challenging nature of NASA programs and their extraordinary demands for technological input, is presented. Also, NASA's current mainline programs, which require development of new technology, are given. A representative sampling of spinoff products and processes resulting from technology utiliization, or secondary application, and the mechanisms NASA employs to stimulate technology utilization are provided. Contact sources for further information are presented.

Haggerty, J. J.↗

Design and evaluation of a fault-tolerant multiprocessor using hardware recovery blocks

Attention is given to the design and evaluation of a fault-tolerant multiprocessor whose rollback recovery mechanism is based on hardware recovery blocks constructed by consecutive state-save operations and several state-save units in every processor and memory module. Upon detection of failure, the multiprocessor reconfigures itself to replace the faulty module and the process originally assigned to the faulty module retreats to one of the previously saved states, in order to resume fault-free execution. A mathematical model is proposed for the calculation of multistep rollback recovery coverage and the risk of restart when all available saved states are exhausted. The mean and the variance of task execution time with the occurrence of rollbacks and/or restarts are evaluated.

Lee, Y.-H.↗

Progress in space nuclear reactor power systems technology development - The SP-100 program

Activities related to the development of high-temperature compact nuclear reactors for space applications had reached a comparatively high level in the U.S. during the mid-1950s and 1960s, although only one U.S. nuclear reactor-powered spacecraft was actually launched. After 1973, very little effort was devoted to space nuclear reactor and propulsion systems. In February 1983, significant activities toward the development of the technology for space nuclear reactor power systems were resumed with the SP-100 Program. Specific SP-100 Program objectives are partly related to the determination of the potential performance limits for space nuclear power systems in 100-kWe and 1- to 100-MW electrical classes. Attention is given to potential missions and applications, regimes of possible space power applicability, safety considerations, conceptual system designs, the establishment of technical feasibility, nuclear technology, materials technology, and prospects for the future.

Davis, H. S.↗

Spill-Detector-and-Shutoff Device

Overflow in liquid chromatography systems rapidly detected and stopped. Spill-detector-and-shutoff device incorporated into liquid-chromatography system. When liquid from output nozzle spills on liquid sensor, device automatically shuts off pump and releases solenoid to pinch off flow in tube. Device uses common type of alarm circuit reset manually before normal operation resumes.

Jarvis, M. R.↗

Study on spectral/radiometric characteristics of the Thematic Mapper for land use applications

Progress under the LANDSAT-4 and 5 Image Data Quality Assessment program for the Thematic Mapper is described. An initial screening of LANDSAT-5 data is performed. Tools are developed to allow access to TIPS-format data. Analysis of scan direction related signal droop is resumed with detailed analysis of nighttime data. A new mathematical model is developed to describe the effect. Coherent noise of a lower frequency than previously reported is discovered and analyzed. Coincident LANDSAT-4 TM and MSS data are analyzed to improve understanding of radiometric relationships between similar wavebands in the two sensors.

Malila, W. A.↗

Government review of the Mod-2 wind turbine (as-built)

The findings and recommendations of the Government committee formed to conduct an as-built review of the three Mod-2 wind turbine units at Goldendale, Washington are given. The purpose of the review was to identify any critical deficiencies in machine components that could result in failure, and to recommend any necessary corrective action before resuming safe machine operation. The review concluded that one of the deficiencies identified would preclude planned attended or unattended operation, provided that certain corrective actions were implemented.

Johnson, W. R.↗

An inert marker study for palladium silicide formation - Si moves in polycrystalline Pd2Si

A novel use of Ti marker is introduced to investigate the moving species during Pd2Si formation on 111 and 100 line-type Si substrates. Silicide formed from amorphous Si is also studied using a W marker. Although these markers are observed to alter the silicide formation in the initial stage, the moving species can be identified once a normal growth rate is resumed. It is found that Si is the dominant moving species for all three types of Si crystallinity. However, Pd will participate in mass transport when Si motion becomes obstructed.

Ho, K. T.↗

Outline of the Active Magnetospheric Particle Tracer Explorers (AMPTE) mission

This paper is intended as an introduction to a series of papers describing the three satellites of the AMPTE mission and their instrumentation. The aims and scientific context of the program are given together with a comparison of the general characteristics of the three spacecraft and their orbits. There is a brief resume of the studies performed so far, and a statement of future plans, together with a calendar of completed and planned experiments and measurements.

Bryant, D. A.↗