Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resistivity measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Phase holograms in PMMA with proximity effect correction

Complex computer generated phase holograms (CGPH's) have been fabricated in PMMA by partial e-beam exposure and subsequent partial development. The CGPH was encoded as a sequence of phase delay pixels and written by the JEOL JBX-5D2 E-beam lithography system, a different dose being assigned to each value of phase delay. Following carefully controlled partial development, the pattern appeared rendered in relief in the PMMA, which then acts as the phase-delay medium. The exposure dose was in the range 20-200 micro-C/sq cm, and very aggressive development in pure acetone led to low contrast. This enabled etch depth control to better than plus or minus lambda(sub vis)/60. That result was obtained by exposing isolated 50 micron square patches and measuring resist removal over the central area where the proximity effect dose was uniform and related only to the local exposure. For complex CGPH's with pixel size of the order of the e-beam proximity effect radius, the patterns must be corrected for the extra exposure caused by electrons scattered back up out of the substrate. This has been accomplished by deconvolving the two-dimensional dose deposition function with the desired dose pattern. The deposition function, which plays much the same role as an instrument response function, was carefully measured under the exact conditions used to expose the samples. The devices fabricated were designed with 16 equal phase steps per retardation cycle, were up to 1 cm square, and consisted of up to 100 million 0.3-2.0 micron square pixels. Data files were up to 500 MB long and exposure times ranged to tens of hours. A Fresnel phase lens was fabricated that had diffraction limited optical performance with better than 85 percent efficiency.

Maker, Paul D.↗
DOE OSTI2023

Hidden anomalies in topological t – PtBi 2 – x probed by second harmonic generation

The noncentrosymmetric Weyl semimetal PtBi 2–x (t-PtBi 2–x ) exhibits various interesting technologically important physical properties. We report the experimental investigation of PtBi 1.6 via second harmonic generation (SHG), single-crystal x-ray diffraction, magnetic susceptibility, and electrical resistivity measurements. While bulk structural, magnetic, and electrical properties show no phase transitions below room temperature, the temperature dependence of the SHG intensity reveals two anomalies: one at T* ~ 60 K and another at T x ~ 200 K. Quantitative analysis indicates that the SHG signal results from both the buckled Bi1 surface termination with the 3m symmetry and flat Bi2 surface termination with the m symmetry. However, the anomalies are mainly driven by Bi1 on the surface: (1) T* marks the onset of surface states which is also manifested in the c-axis resistivity drop and (2) T x corresponds to the lowest thermal contraction of the structure and enhanced magnetic susceptibility. Furthermore, this study demonstrates that SHG is a powerful technique for probing surface properties even for noncentrosymmetric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Interwoven atypical quantum states in CeLiBi 2

Here we report the discovery of CeLiBi 2 , the first example of a material in the tetragonal CeTX 2 ( T = transition metal; X = pnictogen) family wherein an alkali cation replaces the typical transition metal. Magnetic susceptibility and neutron powder diffraction measurements are consistent with a crystal-field Γ 6 ground-state Kramers doublet that orders antiferromagnetically below T N = 3.4 K with an incommensurate propagation wave vector k = ( 0, 0.0724(4), 0.5) that generates a nanometric modulation of the magnetic structure. The best model of the ordered state is an elliptical cycloid with Ce moments primarily residing in the ab plane. This is highly unusual, as all other Γ 6 CeTX 2 members order ferromagnetically. Further, we observe an atypical hard-axis metamagnetic transition at 2 T in magnetostriction, magnetization, and resistivity measurements. CeLiBi 2 is a rare example of a highly conductive material with dominant skew scattering leading to a large anomalous Hall effect. Quantum oscillations with five frequencies arise in magnetostriction and magnetic susceptibility data to T = 30 K and μ 0 H = 55 T, which indicate small Fermi pockets of light carriers with effective masses as low as 0.07 m e . Density functional theory calculations indicate that square-net Dirac-like Bi-p bands are responsible for these ultralight carriers. Together, our results show that CeLiBi 2 enables multiple atypical magnetic and electronic properties in a single clean material.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Measurement of Temperature Fluctuations and Microscopic Growth Rates in a Silicon Floating Zone and Microgravity

A silicon crystal growth experiment has been accomplished using the floating-zone technique under microgravity on a sounding rocket (TEXUS 36). Measurements of temperature fluctuations in the silicon melt zone due to time dependent thermocapillary convection (Marangoni convection) and an observation of the microscopic growth rate were simultaneously performed during the experiment. Temperature fluctuations of about 0.5 - 0.7 C with a frequency range < 0.5Hz were detectable. The microscopic growth rate fluctuates considerably around the average growth rate of 1 mm/min: Growth rates up to 3 to 4mm/min, close to zero mm/min, as well as negative values (backmelting) were observed. Dopant striations are clearly visible in the Sb-doped crystal. They were characterized by Spreading Resistance measurements and Differential Interference Contrast microscopy. The frequencies of temperature fluctuations, microscopic growth rates, and the dopant inhomogeneities correspond quite well, with main frequencies between 0.1 and 0.3 Hz. 3D numerical simulations were performed to predict the optimum position of the temperature sensor, and the characteristic temperature amplitudes and frequencies. At a position 3.4mm above the interface and 1.4mm inside the melt, equivalent to the sensor tip position in the experiment, temperature fluctuations up to 1.8 C and frequencies ? 0.25Hz were found in the simulations.

Schweizer, Markus↗
DOE OSTI2023

Performance of low-loss demountable joints between CORC ® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets

Abstract High-temperature superconductors (HTS) are promising candidates for use in the high-field magnets needed in particle accelerators and fusion reactors. HTS conductor on round core (CORC ® ) cables and wires wound from ReBa 2 Cu 3 O 7- x (REBCO) coated tapes are being developed for use in high-field magnet applications including fusion magnets operating at currents beyond 80 kA, requiring them to be bundled into cable-in-conduit conductor (CICC) configurations. The use of HTS cables enable demountable superconducting fusion magnets that would allow easier access to the fusion machine for maintenance and parts replacement. Such demountable magnets require practical, low-resistance joints, capable of injecting current uniformly into the many REBCO tapes that make up different cable designs. Optimization steps on CORC ® cables have resulted in high-current terminations and joints with a joint resistance measured between a pair of 30-tape CORC ® cables of 51 nΩ at 76 K and 1.9 nΩ at 4 K. Demountable joints between CICCs consisting of six CORC ® cables arranged in flat and round configurations were also tested and compared to joints between low-temperature superconducting (LTS) CICCs consisting of NbTi Rutherford cables. Samples were paired into two configurations (LTS-to-LTS and HTS-to-HTS) with a demountable joint between them that were each tested in series with currents up to 10 000 A in an applied background magnetic field of up to 8 T. The total loop resistance of the HTS-to-HTS sample, including their terminations and joint, was about 4 nΩ at 4 K in self-field with the resistance of the copper pressed joint being less than 1 nΩ. At 8 T, the total loop resistance increased to 6.9 nΩ with the pressed joint contributing 1.4 nΩ. These initial tests prove the feasibility of producing remountable (dry) joints with low resistance between superconducting magnet windings in future compact fusion machines.

Physics↗
DOE OSTI2022

Cobalt as a promising dopant for producing semi-insulating β-Ga 2 O 3 crystals: Charge state transition levels from experiment and theory

Optical absorption and photoconductivity measurements of Co-doped β-Ga 2 O 3 crystals reveal the photon energies of optically excited charge transfer between the Co related deep levels and the conduction or valence band. The corresponding photoionization cross sections are fitted by a phenomenological model considering electron–phonon coupling. The obtained fitting parameters: thermal ionization (zero-phonon transition) energy, Franck–Condon shift, and effective phonon energy are compared with corresponding values predicted by first principle calculations based on density functional theory. A (+/0) donor level ~0.85 eV above the valence band maximum and a (0/-) acceptor level ~2.1 eV below the conduction band minimum are consistently derived. Temperature-dependent electrical resistivity measurement at elevated temperatures (up to 1000 K) yields a thermal activation energy of 2.1 ± 0.1 eV, consistent with the position of the Co acceptor level. Furthermore, the results show that Co doping is promising for producing semi-insulating β-Ga 2 O 3 crystals.

Materials science↗
NASA NTRS2000

Bioelectrical impedance analysis. What does it measure?

Bioelectrical impedance analysis (BIA) has been proposed for measuring fat-free mass, total body water, percent fat, body cell mass, intracellular water, and extracellular water: a veritable laboratory in a box. Although it is unlikely that BIA is quite this versatile, correlations have been demonstrated between BIA and all of these body compartments. At the same time, it is known that all of the compartments are correlated among themselves. Because of this, it is difficult to determine whether BIA is specific for any or all of these compartments. To investigate this question, we induced acute changes in total body water and its compartments over a 3-h period. Using this approach, we demonstrated that multifrequency BIA, using the Cole-Cole model to calculate the zero frequency and infinite frequency resistance, measures extracellular and intracellular water.

NASA Discipline Regulatory Physiology↗
NASA NTRS2012

Lessons Learned during Thermal Hardware Integration on the Global Precipitation Measurement Satellite

The Global Precipitation Measurement mission is a joint NASA/JAXA mission scheduled for launch in late 2013. The integration of thermal hardware onto the satellite began in the Fall of 2010 and will continue through the Summer of 2012. The thermal hardware on the mission included several constant conductance heat pipes, heaters, thermostats, thermocouples radiator coatings and blankets. During integration several problems arose and insights were gained that would help future satellite integrations. Also lessons learned from previous missions were implemented with varying degrees of success. These insights can be arranged into three categories. 1) the specification of flight hardware using analysis results and the available mechanical resources. 2) The integration of thermal flight hardware onto the spacecraft, 3) The preparation and implementation of testing the thermal flight via touch tests, resistance measurements and thermal vacuum testing.

Cottingham, Christine↗
DOE OSTI2020

U 3 Si 2 and UO 2 composites densified by spark plasma sintering for accident-tolerant fuels

This work reports the synthesis and characterization of the U 3 Si 2 and UO 2 composites sintered by spark plasma sintering (SPS) with controlled microstructures for accident-tolerant fuel application. The U 3 Si 2 and UO 2 composites with different silicide and oxide ratios were synthesized by SPS at temperatures from 1000 to 1300 °C for 5 minutes. The microstructure and phase composition of the SPS densified composite fuels were characterized with scanning electron microscopy, X-ray diffraction (XRD), and energy dispersed spectroscopy (EDS). A systematic study of the thermal and mechanical properties was conducted using microhardness testing and laser flash apparatus, along with oxidation resistance measurements using thermogravimetric analysis (TGA). The results show that the synthesis of composite fuels can be achieved with a 90% theoretical density (TD) at 1000 °C and over 95% TD when sintered at 1300 °C. XRD and EDS results confirmed that the dominant phases in the composites are U 3 Si 2 and UO 2 . Improved physical density generally leads to improved hardness, fracture toughness, thermal diffusivity, and onset temperature during the oxidation process. U 3 Si 2 was found to play a dominant role in determining the mechanical and oxidation properties of the composite fuels, whereas UO 2 had a more important impact on controlling the thermal diffusivity of the composites. The composite with 50 wt% UO 2 sintered at 1300 °C displayed the onset oxidation temperature of 500 °C by dynamic oxidation testing using TGA at a ramp degree of 10 °C/min. The composite also achieved a high fracture toughness of ~3.5 MPa m ½ . Finally, these results highlight the potential of composite fuel forms densified by SPS with simultaneously enhanced fissile element density, fracture toughness, thermal transport properties, and oxidation resistance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Postirradiation Examination of WIRE-21 Experiment Irradiated in the High Flux Isotope Reactor

Westinghouse Electric Company is developing wireless sensors to monitor the centerline temperature and internal pressure of commercial light-water reactor fuel rods during irradiation. Oak Ridge National Laboratory and Westinghouse Electric Company developed the Wireless Instrumented RB Experiment 2021 (WIRE-21) to test wireless temperature and pressure sensor technologies in a removable beryllium position in the High Flux Isotope Reactor. The experiment was irradiated for a total of 75 days, at temperatures ranging from approximately 150°C to 400°C, resulting in a peak fast (energy > 0.1 MeV) neutron fluence of about 3 × 10 21 n/cm 2 . The temperature was intentionally cycled multiple times to compare the response of the wireless temperature sensor to collocated thermocouples. Similarly, the pressure sensor was actuated in multiple steps to compare the response of the wireless measurement to excore pressure transducers (Petrie et al., 2023). After irradiation, the experiment was disassembled in the Irradiated Fuels Examination Laboratory (IFEL) hot cell at Oak Ridge National Laboratory with the intent to recover sensor and dosimetry components, document the as-irradiated condition of the hardware, and investigate possible causes of the sensor behavior observed during irradiation. The postirradiation examination successfully recovered and preserved key WIRE-21 components. After the housing was removed using a milling machine, the internal experiment sections were examined. All eight fiber-optic sensors were recovered, cut, and stored. The silicon carbide thermometry, temperature sensor, pressure sensor, lower spacer, and selected pressure and temperature cable sections were also removed and stored. The metal bellows of the pressure sensor was found to be plastically deformed, indicating that it had been properly pressurized during irradiation and generally behaved as expected. X-ray diffraction analysis of a section of one of the irradiated inductor cores within the pressure sensor was performed and confirmed the presence of phase-pure alpha ferrite (i.e., no unexpected phase transformations). Inductance testing was performed on the irradiated pressure sensor cores using an unirradiated test coil, and DC resistance measurements of the transceiver coils were also performed. The measurements with irradiated inductor cores assembled inside unirradiated coils showed slightly reduced inductance compared to measurements made with unirradiated cores, but the difference was not sufficient to explain the more significant reductions in inductance that were observed in-pile. Therefore, it is suspected that degradation of the inductor coils (specifically the wire wrapping) is responsible for the reduced inductance observed in-pile.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Spontaneous Supercrystal Formation During a Strain‐Engineered Metal–Insulator Transition

Abstract Mott metal–insulator transitions possess electronic, magnetic, and structural degrees of freedom promising next‐generation energy‐efficient electronics. A previously unknown, hierarchically ordered, and anisotropic supercrystal state is reported and its intrinsic formation characterized in‐situ during a Mott transition in a Ca 2 RuO 4 thin film. Machine learning‐assisted X‐ray nanodiffraction together with cryogenic electron microscopy reveal multi‐scale periodic domain formation at and below the film transition temperature ( T Film ≈ 200–250 K) and a separate anisotropic spatial structure at and above T Film . Local resistivity measurements imply an intrinsic coupling of the supercrystal orientation to the material's anisotropic conductivity. These findings add a new degree of complexity to the physical understanding of Mott transitions, opening opportunities for designing materials with tunable electronic properties.

Gorobtsov, Oleg Yu.↗
DOE OSTI2023

Revealing the Chemical State of Palladium in Operating In 2 O 3 Gas Sensors: Metallic Pd Enhances Sensing Response and Intermetallic In x Pd y Compound Blocks It

The sensing response of metal oxides activated with noble metal nanoparticles is significantly influenced by changes to the chemical state of corresponding elements under operating conditions. Here, a PdO/rh-In 2 O3 consisting of PdO nanoparticles loaded onto rhombohedral In 2 O 3 was studied as a gas sensor for H 2 gas (100–40000 ppm in an oxygen-free atmosphere) in the temperature range of 25–450 °C. The phase composition and chemical state of elements were examined by resistance measurements combined with synchrotron-based in situ X-ray diffraction and ex situ X-ray photoelectron spectroscopy. As found, PdO/rh-In 2 O 3 undergoes a series of structural and chemical transformations during operation: from PdO to Pd/PdH x and finally to the intermetallic In x Pd y phase. The maximal sensing response (R N2 /R H2 ) of ~5 · 10 7 towards 40000 ppm (4 vol %) H 2 at 70 °C is correlated with the formation of PdH 0.706 /Pd. The In x Pd y intermetallic compounds formed around 250 °C significantly decrease the sensing response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sm 2 Ru 3 Sn 5 : A Noncentrosymmetric Cubic Member of the Ln 2 M 3 X 5 Family

An optimized synthetic method is presented for Sm 2 Ru 3 Sn 5 and investigate its physical properties and electronic structure. Sm 2 Ru 3 Sn 5 is prepared by arc-melting stoichiometric ratios of the elements and is confirmed by single crystal and powder X-ray diffraction. An antiferromagnetic transition is observed at T N = 3.8 K. A modified Curie-Weiss fit to the data in the range 50–150 K yields a Curie-Weiss temperature: θ CW = −36.6 K and an effective magnetic moment: μ eff = 0.83 μ B , in agreement with a Sm 3+ oxidation state. Field-dependent magnetization up to H = 7 T at 2 K shows a maximum response of 0.06 μ B , which is significantly lower than the expected Sm 3+ saturation moment (0.71 μ B ). Resistivity measurements indicate metallic behavior, and analysis of the magnetic entropy from the heat capacity reveals a doublet ground state due to crystal electric field splitting. The electronic structure and density of states are calculated with density function theory and further supported by the local density approximation with dynamical mean-field theory. Finally, the experimental and computational results highlight localized Sm 3+ moments and suggest a possible interplay between Ruddelman–Kitel–Kasuya–Yosida and Kondo interactions, positioning Sm 2 Ru 3 Sn 5 as a promising material for studying topology and complex physical phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Interstitial Atoms and the Frustrated and Allowed Structural Transitions Principle: Tunability in the Electronic Structure of AuCu 3 ‐type Frameworks in Dy 4 T 1− x Ga 12 (T = Ag, Ir)

In this Article, we explore how the chemical pressure (CP) features of an intermetallic phase may provide opportunities to couple perturbations in electron count with the stabilization of the underlying geometrical structure. AuCu 3 ‐type LnGa 3 (Ln = lanthanide or group 3 metal) phases contain octahedral cavities of negative CP held open by overly compressed Ln–Ga interactions, leading to a series of transition metal‐stuffed derivatives. We present new additions to this family with the synthesis and crystal structures of Dy 4 T 1−x Ga 12 with (T, x) = (Ag, 0.29) and (Ir, 0.15), adopting Y 4 PdGa 12 ‐type superstructures of the AuCu 3 ‐type. density functional Ttheory (DFT)‐CP calculations, when adjusted to avoid dipolar CP features, affirm that T atom incorporation provides a mechanism for the relief of packing tensions, while electronic density of states distributions illustrate that the T atoms serve largely as electron or hole donors to the band structure, as needed for them to attain d 10 configurations. The maximum obtainable value for x may be limited by a mismatch between the Fermi energy and pseudogap, in line with the balance of factors envisioned by the frustrated and allowed structural transitions principle. Furthermore, trends in resistivity measurements on T = Ir, Pd, and Ag compounds are interpretable in terms of the varying degrees of disorder arising from x < 1.0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Combinatorial Synthesis and High-Throughput Characterization of Microstructure and Phase Transformation in Ni–Ti–Cu–V Quaternary Thin-Film Library

Ni–Ti–based shape memory alloys (SMAs) have found widespread use in the last 70 years, but improving their functional stability remains a key quest for more robust and advanced applications. Named for their ability to retain their processed shape as a result of a reversible martensitic transformation, SMAs are highly sensitive to compositional variations. Alloying with ternary and quaternary elements to fine-tune the lattice parameters and the thermal hysteresis of an SMA, therefore, becomes a challenge in materials exploration. Combinatorial materials science allows streamlining of the synthesis process and data management from multiple characterization techniques. In this study, a composition spread of Ni–Ti–Cu–V thin-film library was synthesized by magnetron co-sputtering on a thermally oxidized Si wafer. Composition-dependent phase transformation temperature and microstructure were investigated and determined using high-throughput wavelength dispersive spectroscopy, synchrotron X-ray diffraction, and temperature-dependent resistance measurements. Of the 177 compositions in the materials library, 32 were observed to have shape memory effect, of which five had zero or near-zero thermal hysteresis. These compositions provide flexibility in the operating temperature regimes that they can be used in. A phase map for the quaternary system and correlations of functional properties are discussed with respect to the local microstructure and composition of the thin-film library.

42 ENGINEERING↗
DOE OSTI2022

Magnetic ordering in GdAuAl 4 Ge 2 and TbAuAl 4 Ge 2 : Layered compounds with triangular lanthanide nets

In this work, we report the synthesis and magnetic properties of GdAuAl 4 Ge 2 and TbAuAl 4 Ge 2 , where temperature and magnetic field dependent magnetization, heat capacity, and electrical resistivity measurements reveal that both compounds exhibit several magnetically ordered states at low temperatures, with evidence for magnetic fluctuations extending into the paramagnetic temperature region. For magnetic fields applied in the ab-plane there is particularly rich behavior, with several ordered state regions that are separated by metamagnetic phase transitions. Despite Gd being an isotropic S-state ion and Tb having an anisotropic J-state, there are similarities in the phase diagrams for the two compounds, suggesting that factors such as the symmetry of the crystalline lattice, which features well separated triangular planes of lanthanide ions, or the Ruderman–Kittel–Kasuya– Yosida interaction control the magnetism. We also point out similarities to other centrosymmetric compounds that host skyrmion lattices such as Gd 2 PdSi 3 , and propose that the LnAuAl 4 Ge 2 family of compounds are of interest as reservoirs for complex magnetism and electronic behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Growth, discovery and characterization of single crystalline Eu 0.8 Pt 6 Al 16.4

Here, we report the discovery of a ternary compound, Eu 0.8 Pt 6 Al1 6.4 . We determine its chemical and structural characteristics based on energy-dispersive X-ray spectroscopy as well as both powder and single-crystal X-ray diffraction, demonstrating that it crystallizes in a hexagonal structure type EuPt 6 Al 17 with no reported structural analog. The temperature- and field-dependent magnetization, and temperature-dependent resistance measurements, reveal that the Eu 2+ magnetic moments order antiferromagnetically below 2.8 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗