Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “recyclable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Crashworthiness of recycled carbon fiber composite sinusoidal structures at dynamic rates

Fiber reinforced polymer composites are finding applications in the automotive space for structurally critical applications including crash management. The use of recycled carbon fiber reinforcement can greatly reduce carbon emissions. In this study, recycled carbon fiber composites were manufactured into a self-supporting geometry using three matrices: polyphenylene sulfide (PPS), acrylonitrile butadiene styrene (ABS), and a structural epoxy, and subsequently crushed between flat platens at dynamic rates ranging from 4.6 to 9.1 ms -1 at temperatures in a range of -40°C to 80°C. Load-displacement data was used to evaluate their specific energy absorption, crush efficiency, and steady-state crush stress. Further, the energy absorption of the ABS composites was strongly sensitive to temperature, while the PPS composites exhibited strong crush efficiency dependence with both rate and temperature. The epoxy composites exhibited stable crush behavior at dynamic crush rates but exhibited a dramatic reduction in crush efficiency relative to quasi-static tests. The results of this study indicate that recycled fiber composites can achieve very high energy absorption levels (50–80kJkg -1 at room temperature) that make them an excellent alternative to more expensive and less environmentally friendly continuous virgin fiber laminates.

42 ENGINEERING↗
DOE OSTI2026

Upcycling Polycrystalline LiNi1/3Mn1/3Co1/3O2 to High-Performance Large-Grained LiNi0.6Mn0.2Co0.2O2 via Simplified Polyol-Mediated Recycling

The escalating demand for lithium-ion batteries (LIBs) necessitates advanced recycling strategies that can address both resource scarcity and environmental impact. While conventional hydrometallurgy shows promise, it is challenged by complexity, impurity management, and environmental footprint. Here, we report a strategic polyol-metallurgy recycling process that efficiently transforms spent polycrystalline LiNi1/3Mn1/3Co1/3O2 (NMC111) into high-performance large-grained LiNi0.6Mn0.2Co0.2O2 (NMC622), offering dual benefits of compositional upcycling and morphology upgradation. Our approach leverages a polyol system with meticulous control over nickel salt addition and the precipitation process. This yields upcycled cathode materials possessing excellent structural integrity, well-defined large-grained particles (5-10?..mu..m), and robust electrochemical performance, including a specific capacity of ~182 mAh g-1 at C/10 and 88.0% capacity retention after 100 cycles. This facile and multifunctional process provides an environmental-friendly pathway for advanced cathode recycling, significantly contributing to a circular economy for LIBs through precise control over critical material attributes.

25 ENERGY STORAGE↗
DOE OSTI2023

Eco-friendly passive radiative cooling using recycled packaging plastics

Passive daytime radiative cooling, requiring zero external energy consumption, is a promising cooling strategy achieved by simultaneously reflecting solar irradiance and thermally radiating heat into the cold outer space (~3 K) through the atmospheric transparency window. However, current materials for passive radiative cooling face huge challenges, such as complicated fabrication approaches, expensive raw materials, and environmental requirements for practical applications. In line with the urgent need for plastic recycling to curb global environmental pollution, the recycled plastics are used to fabricate a passive radiative cooling material. Herein, the foam-paper composite (FPC) with excellent self-cooling capability is fabricated by a simple crushing-and-mixing procedure using recycled polystyrene (PS) foam and printer paper. The superhydrophobic PS foam particles not only protect the FPC from water damage for field applications but also reinforce its solar reflectivity via their porous structure. The cellulose fibers in printer paper can efficiently emit infrared thermal radiation into the cold outer space and bond dispersed PS foam particles together, further increasing its mechanical strength. The combination of highly diffusely reflective PS foam particles and fiber-based printer paper results in a reflectivity of 96% in the solar spectrum, a sub-ambient cooling performance of 8.4 degrees C, and a maximum radiative cooling power of 90 W/m2 during a 24-h cycle. Meanwhile, the FPC with high humidity can maintain its high solar reflectivity, which promotes its application in humid subtropical areas. Further, the low material cost and ease of fabrication will provide a path for effective daytime radiative cooling, especially in less developed areas.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Mixed polyester recycling can enable a circular plastic economy with environmental benefits

The mixed and varied nature of fossil-based and bio-based plastic waste requires complex and costly separations to enable compatibility with recycling technologies. A circular plastic economy based on mixed polyesters through cleaving ester bonds to produce monomers, while re-utilizing bio-based monomers to produce high-quality sustainable plastics, charts an exciting solution. However, the feasibility of such a circular economy solution remains underexplored. Here, in this study, we conducted a techno-economic analysis and life-cycle assessment of three polyester depolymerization recycling processes-methanolysis, glycolysis, and acid hydrolysis-for a mixed feedstock (polyethylene terephthalate [PET], polylactic acid [PLA], and polybutylene adipate terephthalate [PBAT]). Methanolysis outperforms glycolysis and hydrolysis economically and environmentally due to more efficient downstream separations, generating products with a 31% decrease in selling price and 21%-46% reduction in acidification, carcinogenic toxicity, fossil-fuel depletion, global warming potential, particulate formation, and smog formation compared to conventional polyester manufacturing. This study highlights the viability of a circular plastic economy for mixed polyesters via a single chemical recycling process.

09 BIOMASS FUELS↗
DOE OSTI2022

Direct recycling and remanufacturing of anode scraps

With the rapid expansion of Li-ion battery production, significant amounts of electrode scraps that need to be recycled are being produced during cell manufacturing. Anode scrap that comprises critical materials such as graphite and valuable Cu should be recycled and reintegrated into the battery supply chain. This study reports a simple yet efficient water-based recovery process for delaminating anode films from Cu foils through the intercalation of water between the hydrophilic Cu foil and hydrophobic anode coating. Because of the absence of harsh chemicals, the recovered anode films and Cu foils are battery grade and free of damage in terms of physical and chemical properties. This study also demonstrates the reprocessing of those anode films into a new anode that exhibits electrochemical performance similar to that of the pristine anode. We report this environmentally friendly and cost-effective separation technique allows battery manufacturers to directly recycle and reuse their electrode scraps safely and effectively on-site.

25 ENERGY STORAGE↗
DOE OSTI2023

Recycling Silicon Bottom Cells from End-of-Life Perovskite–Silicon Tandem Solar Cells

Perovskite-silicon tandem cells have shown much higher efficiencies than the single junction cells, which promises further reduction of energy cost from photovoltaics. Due to the protection by perovskites, silicon subcells in perovskite-silicon tandem cells may last much longer than they are designed for single junction devices. Here we report recycling silicon bottom cells from end-of-life perovskite-silicon tandem solar cells which further reduce their cost and enhance the sustainability. We demonstrate that silicon bottom cells can be recycled from end-oflife tandem cells by thermal delamination and chemical cleaning processes. The optoelectronic properties of silicon bottom cells were shown largely unchanged at the end-of-life tandem cells. The tandem cells refurbished from recycled silicon bottom cells show comparable efficiencies with those fabricated from fresh ones.

14 SOLAR ENERGY↗
DOE OSTI2026

Improved 140 Nd Production for the 140 Nd/ 140 Pr In Vivo Generator through Target Recycling and Radiochemical Optimization

Theranostic strategies that utilize f-block therapeutic radionuclides, including 161 Tb, 177 Lu, 225 Ac, and 227 Th, suffer from a shortage of positron emission tomography (PET) imaging counterparts in the same chemical space and often rely on 68 Ga as a surrogate. The 140 Nd/ 140 Pr in vivo PET generator, which belongs to the f-block, may address this issue and can be produced via the 141 Pr(p,2n) 140 Nd production route by using medium-energy cyclotrons. However, impurities in the target material, including stable Nd, and the inherent difficulty of adjacent lanthanide separations limit the achievable radionuclidic and chemical purity of 140 Nd. In this work, we address these challenges through the purification and recycling of praseodymium target material and optimization of Nd/Pr separation. The resulting purified 140Nd was evaluated using DOTA and Macropa chelators via radiolabeling and in vitro stability studies. A target material purification and recycling method was developed for the monoisotopic 141 Pr starting material to remove stable Nd impurities, yielding 90.3 ± 4.7% (n = 3) recovery. The purified 141 Pr was isolated as Pr 6 O 11 and irradiated with 24 MeV protons (20.07 MeV at the target surface) at 20 μA for 4 h, which produced 1417.0 ± 83.4 MBq (38.3 ± 2.2 mCi) of 140 Nd at the end of bombardment (EOB). The produced 140 Nd was purified through an optimized DGA normal method to recover 71.6 ± 6.3% pure 140 Nd. The amount of stable Nd reduced progressively in each target purification cycle from >340 ppm without purification to <250 ppb after three cycles, while other measured metallic impurities were below 30 ppb. This improvement in target purity was reflected in the direct increase of apparent molar activity (AMA), when purified 140 Nd was evaluated with DOTA and Macropa chelators. AMA of [ 140 Nd]Nd-DOTA and [ 140 Nd]Nd-Macropa increased from 70.3 MBq/μmol (1.9 mCi/μmol) and 74 MBq/μmol (2.0 mCi/μmol) to 8025.3 MBq/μmol (216.9 mCi/μmol) and 8473.0 MBq/μmol (229.0 mCi/μmol), respectively, after the third target purification cycle. Further evaluation of chelator-labeled 140 Nd showed that [ 140 Nd]Nd-DOTA was stable in phosphate-buffered saline (PBS), saline, human serum, and mouse serum, whereas [140Nd]Nd-Macropa was stable in all except human serum. This work established a practical methodological advance for the production of 140 Nd/ 140 Pr in vivo PET generators, combining optimized target recycling and radiochemical separation to enable scaled-up and high-molar activity 140 Nd suitable for preclinical imaging. These advances support broader development of 140 Nd/ 140 Pr as a robust PET analogue, especially for f-block therapeutics.

Irradiation↗
DOE OSTI2020

Recycling Epoxy by Vitrimerization: Influence of an Initial Thermoset Chemical Structure

Epoxy/anhydride cured thermosets are widely used in aerospace and wind energy structures. Recycling the enormous amounts of epoxy thermoset waste remains a global challenge. Vitrimerization, a practical, low-cost, eco-friendly and scalable method was developed for closed-loop recycling of the crosslinked epoxy by converting the permanent network into a vitrimer type dynamic network. Here we study the effect of virgin epoxy network properties on network reforming efficiency and the activation energy of the dynamic network by varying the epoxy/anhydride ratio. The results point out that the permanent network crosslink density and glass transition temperature have a more pronounced effect on vitrimerization efficiency by comparison with the concentration of free hydroxyl groups in the system. Furthermore, the result can be potentially used to better control vitrimerization efficiency in recycling epoxy thermoset polymers and tailor the vitrimerized products properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Design and Optimization of the Direct Recycling of Spent Li-Ion Battery Cathode Materials

Direct regeneration of spent Li-ion batteries based on the hydrothermal relithiation of cathode materials is a promising next-generation recycling technology. In order to demonstrate the feasibility of this approach at a large scale, we systematically design and optimize the process parameters to minimize both energy and raw material costs. Specifically, the effects of regenerative processing parameters on the composition, structure, and electrochemical performance of the regenerated cathode materials are investigated via systematic characterization and testing. From this analysis, it was found that the raw material costs can be substantially reduced by either replacing the typically employed 4 M LiOH solution by a cost-effective mixture of 0.1 M LiOH and 3.9 M KOH or recycling of the concentrated 4 M LiOH for continuous relithiation processes. Finally, life cycle analysis suggests that this strategy results in reduced energy consumption and greenhouse gas emissions, leading to an increased potential revenue, particularly when compared with hydro- and pyrometallurgical recycling methods.

25 ENERGY STORAGE↗
DOE OSTI2022

Direct Recycling of Lithium-Ion Battery Cathodes: A Multi-Stage Annealing Process to Recover the Pristine Structure and Performance

Direct recycling is an alternative low-cost process that retains the structure of the lithium-ion battery cathode rather than going through materials dissolution and repurification. While the process shows promise, various steps need to be better understood and studied to identify possible roadblocks, cost intensive steps, and needed variations in protocol that may be necessary based on the feedstock of recycled cathodes available. In this study, we have evaluated the process of thermal relithiation as it applies to end-of-life cathode materials. For recovered end-of-life cathodes, approximately 20% of the useable lithium has been lost due to solid electrolyte interface formation, parasitic reactions, and particle isolation; this lost lithium contributes to higher cell impedance and a gradual shift in electrode potentials. As a first step in the direct recycling process, this lithium needs to be restored not only to recover capacity but also to eliminate surface vacancies and hinder surface reconstruction that may increase impedance and impact performance. Here, we have optimized a coating method followed by a two-stage annealing process that restores a model delithiated NMC333 material to pristine performance. Comparisons to single-stage processes are made, and new characterization tools have been used to better understand the processes.

25 ENERGY STORAGE↗
DOE OSTI2025

Lithium Recovery and Conversion from Wastewater Produced by Recycling of Li-Ion Batteries via Two-Stage Electrodialysis

Electrodialysis (ED) is a membrane separation technique that has been well-established in various applications such as desalination, drinking water production, wastewater treatment, and lithium salt production. A limited number of studies have explored its application in lithium salt production, especially from secondary resources like wastewater. This study investigated a route to recover lithium from wastewater generated from the recycling of end-of-life Li-ion batteries. Two electrodialysis methods, namely standard electrodialysis (ED) and bipolar-membrane electrodialysis (BPED), were combined to concentrate lithium ions and convert them to lithium hydroxide (LiOH), a valuable product that can be fed back into the supply chain for manufacturing Li-ion batteries. Lithium (Li⁺) concentration in recycling wastewater was successfully increased by 58% using ED and converted to LiOH (>96% purity) with a further increase in Li⁺ concentration by 67% using BPED. The Coulombic efficiency of the experiments was 91.0 and 92.2%, with specific energy consumption of 1 and 2.5 kWh/kg, and a production rate of 1.01 and 0.14 kg/h/m 2 for the ED and BPED processes, respectively. In addition, preliminary techno-economic and environmental impact analyses show a significant improvement (GHG emission reduction by 77% and total energy reduction by 53%) by producing LiOH via electrodialysis compared to conventional lithium production via brine extraction. The process was assessed to be beneficial for lithium extraction from secondary resources and to enhance overall battery recycling efforts.

25 ENERGY STORAGE↗
DOE OSTI2026

Counterintuitive Compatibilization of Poly(-Valerolactone) and Poly(L-Lactic Acid) by Statistical Copolymers toward Compostable and Recyclable Packaging

Poly(δ-valerolactone) (PVL) and poly(l-lactic acid) (PLLA) are bioderivable, compostable, and chemically recyclable plastics with synergistic properties for addressing plastic waste accumulation in receiving environments. Though recyclable-by-design polymers often fall short of competing with incumbent materials, blending affords a means to leverage individual component strengths toward ideal tunable properties. Polymer blends are often immiscible, but a range of methodologies are available to promote mixing. Here, we report on the compatibilization of 9 immiscible PVL and PLLA blends with three different compatibilization agents: thermoplastic starch, synthesized PVL-co-PLLA statistical copolymers (SCPs), and synthesized PVL-b-PLLA block-type copolymers. Resulting degrees of compatibilization are observed through scanning electron microscopy, corroborated by thermal and mechanical analyses monitoring performance as a function of microdomain size. Small-angle and wide-angle X-ray scattering experiments are conducted to observe the influence of compatibilizers on individual crystalline phases to further elucidate material behavior. Molecular dynamics simulations provide key insights into the interfacial interactions between homopolymers and compatibilizers. Finally, a suite of end-of-life avenues is established by biodegradation in industrial composting conditions, chemical recycling by deconstruction to hydroxymethyl esters, and direct chemical depolymerization to lactone precursors in mixed feed. Overall, we highlight several promising blends and the counterintuitive SCP compatibilization phenomenon toward high-performance, sustainable materials.

Compatibilization, copolymer compatibilizer, bio-b↗
DOE OSTI2022

Redesigned Hybrid Nylons with Optical Clarity and Chemical Recyclability

Aliphatic polyamides, or nylons, are typically highly crystalline and thermally robust polymers used in high-performance applications. Nylon 6, a high-ceiling-temperature (HCT) polyamide from e-caprolactam, lacks expedient chemical recyclability, while low-ceiling temperature (LCT) nylon 4 from pyrrolidone exhibits complete chemical recyclability, but it is thermally unstable and not melt-processable. Here, we introduce a hybrid nylon, nylon 4/6, based on a bicyclic lactam composed of both HCT ..epsilon..-caprolactam and LCT pyrrolidone motifs in a hybridized offspring structure. Hybrid nylon 4/6 overcomes trade-offs in (de)polymerizability and performance properties of the parent nylons, exhibiting both excellent polymerization and facile depolymerization characteristics. This stereoregular polyamide forms nanocrystalline domains, allowing optical clarity and high thermal stability, however, without displaying a melting transition before decomposition. Of a series of statistical copolymers comprising nylon 4/6 and nylon 4, a 50/50 copolymer achieves the greatest synergy in both reactivity and polymer properties of each homopolymer, offering an amorphous nylon with favorable properties, including optical clarity, a high glass transition temperature, melt processability, and full chemical recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spiroborate-Linked Ionic Covalent Adaptable Networks with Rapid Reprocessability and Closed-Loop Recyclability

Covalent adaptable networks (CANs) represent a novel class of polymeric materials crosslinked by dynamic covalent bonds. Since their first discovery, CANs have attracted great attention due to their high mechanical strength and stability like conventional thermosets under service conditions and easy reprocessability like thermoplastics under certain external stimuli. Here, we report the first example of ionic covalent adaptable networks (ICANs), a type of crosslinked ionomers, consisting of negatively charged backbone structures. More specifically, two ICANs with different backbone compositions were prepared through spiroborate chemistry. Given the dynamic nature of the spiroborate linkages, the resulting ionomer thermosets display rapid reprocessability and closed-loop recyclability under mild conditions. The materials mechanically broken into smaller pieces can be reprocessed into coherent solids at 120 °C within only 1 min with nearly 100% recovery of the mechanical properties. Upon treating the ICANs with dilute hydrochloric acid at room temperature, the valuable monomers can be easily chemically recycled in almost quantitative yield. Furthermore, this work demonstrates the great potential of spiroborate bonds as a novel dynamic ionic linkage for development of new reprocessable and recyclable ionomer thermosets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sorting rare earth magnets motors for recycling without opening the motors

Abstract A novel approach for sorting electric motors without dismantling them is reported in this article. This approach increases the likelihood that a motor selected from a mixture for recycling would contain rare earth elements (REEs), which are pivotal for numerous advanced green technologies. The challenge of inadvertently dismantling motors without REEs during recycling is addressed by this proposed innovative method. It relies on cogging interactions and power density for sorting motors with REEs. The process uses an algorithm introduced in this work to sort motors in two steps by (a) distinguishing induction motors from permanent magnet motors, and (b) distinguishing motors with critical REEs (e.g., Nd, Pr, Dy, Tb) from ferrite-based motors, all without opening the motors. The former was accomplished with 100% accuracy while the latter was accomplished with ~ 78% accuracy. Such high accuracy improves the recycling efficiency of critical REEs from motors, alleviating concern about supply disruption and supporting resource conservation and sustainability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Biobased chemical recycling: aminolysis of PET using renewable reagents and monomers to synthesize new semi-aromatic polyamides

Chemical recycling of PET is a method of depolymerizing polymer chains to monomeric components enabling the synthesis of second-generation materials with virgin-like quality. Commercial chemical recycling techniques rely upon high pressure methanolysis to create precursors capable of synthesizing a second-generation PET resin. However, despite the circular approach of methanolysis, a product with a very short lifespan and similar value is created. The approach of the current study is to utilize aminolysis as an ambient pressure technique to create precursors for higher value materials with longer lifespans to address the current crisis in plastic waste. Semi-aromatic polyamides (SAP) are desired in this circumstance because of their high melting point and heat resistance combined with good melt-processability similar to aliphatic polyamides. In this study SAPs were synthesized using precursors recovered from the aminolysis of PET employing biobased diamines and dicarboxylic acids. While aminolysis has been explored in previous studies, this work investigated the use of biobased components from castor oil: decamethylene diamine during recycling and sebacic acid during polymerization. Polymer synthesis resulted in the formation of SAPs similar to polyphthalamides (PPA) with novel structures given the aromatic portion from terephthalic acid (TPA) and aliphatic portion from the diamines and diacids. The synthesized materials exhibited excellent thermal stability with high glass transition temperatures. Novel polymers were created with varying aliphatic chain length to understand fundamental parameters needed to produce a valuable polymer from post-consumer waste.

High performance Applications↗
DOE OSTI2020

Impact of divertor material on neutral recycling and discharge fueling in DIII-D

We report that experiments with the lower divertor of DIII-D during the Metal Rings Campaign (MRC) show that the fraction F of atomic D in the total recycling flux is material-dependent and varies through the ELM cycle, which may affect divertor fueling. Between ELMs, F C ~ 10% and FW ~ 40%, consistent with expectations if all atomic recycling is due to reflections. During ELMs, F C increases to 50% and F W to 60%. In contrast, the total D recycling coefficient including atoms and molecules R stays close to unity near the strike point where the surface is saturated with D. During ELMs, R can deviate from unity, increasing during high energy ELM-ion deposition (net D release) and decreasing at the end of the ELM which leads to ability of the target to trap the ELM-deposited D. The increase of R > 1 in response to an increase in ion impact energy Ei has been studied with small divertor target samples using Divertor Materials Evaluation System (DiMES). An electrostatic bias was applied to DiMES to change E i by 90 eV. On all studied materials including C, Mo, uncoated and W-coated TZM (>99% Mo, Ti, and Zr alloy), W, and W fuzz, an increase of E i transiently increased the D yield (and R) by ~10%. On C there was also an increase in the molecular D 2 yield, probably due to ion-induced D 2 desorption. Despite the measured increase in F on W compared to C, attached H-mode shots with OSP on W during MRC did not demonstrate a higher pedestal density. About 8% increase in the edge density could be seen only in attached L-mode scenarios. The difference can be explained by higher D trapping in the divertor and lower divertor fueling efficiency in H- versus L-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Novel Module Architecture for Lower CapEx and Improved Recyclability for c-Si PV Modules

Photovoltaic (PV) energy production is currently increasing at a rate at which recycling is becoming necessary. A novel module architecture has been demonstrated that has potential for high value recycling for c-Si PV. This architecture eliminates the vacuum lamination process and cross-linked en capsulants. Functioning prototypes of c-Si have been fabricated for stress testing in collaboration with NREL. These modules are being tested against traditionally manufactured modules. Based on preliminary results, this module architecture is a potentially viable solution for improving the manufacturing cost and recyclability of PV modules while retaining module performance.

computer architecture↗