Search complexity and resource scaling for the quantum optimal control of unitary transformations
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
A methodology is proposed for designing a low-energy consuming ternary-valued full adder based on a quantum dot (QD) electrostatically coupled with a single electron transistor operating as a charge sensor. The methodology is based on design optimization: the values of the physical parameters of the system required for implementing the logic operations are optimized using a multiobjective genetic algorithm. The searching space is determined by elements of the capacitance matrix describing the electrostatic couplings in the entire device. The objective functions are defined as the maximal absolute error over actual device logic outputs relative to the ideal truth tables for the sum and the carry-out in base 3. The logic units are implemented on the same device: a single dual-gate quantum dot and a charge sensor. Their physical parameters are optimized to compute either the sum or the carry out outputs and are compatible with current experimental capabilities. The outputs are encoded in the value of the electric current passing through the charge sensor, while the logic inputs are supplied by the voltage levels on the two gate electrodes attached to the QD. The complex logic ternary operations are directly implemented on an extremely simple device, characterized by small sizes and low-energy consumption compared to devices based on switching single-electron transistors. The design methodology is general and provides a rational approach for realizing non-switching logic operations on QD devices.
The results of theoretical calculations of the multiatom laser excitation spectra of Rydberg atoms under conditions of a dipole blockade are presented, and the effect of the laser radiation line width and the interaction energy of Rydberg atoms on the dipole blockade completeness degree is discussed. It is shown that in order to increase the fidelity of performing quantum gates based on a dipole blockade, it is necessary to use resonance dipole − dipole interaction and exciting laser radiation with a line width smaller than 10 kHz. (paper)
We propose a quantum algorithm for the purification of a generic mixed state {rho} of a n-qudit system by using an ancillary n-qudit system. The algorithm is optimal in that (i) the number of ancillary qudits cannot be reduced, (ii) the number of parameters which determine the purification state |{psi}> exactly equals the number of degrees of freedom of {rho}, and (iii) |{psi}> is easily determined from the density matrix {rho}. Moreover, we introduce a quantum circuit in which the quantum gates are unitary transformations acting on a 2n-qudit system. These transformations are determined by parameters that can be tuned to generate, once the ancillary qudits are disregarded, any given mixed n-qudit state.
This poster includes sections on: Quantum annealers for classification, Quantum gate models for classification, Software and Workflows, and Quanutm optimization for LHC physics.
We provide description of different techniques to assess performance of quantum gates. In particular we focus on newly introduced metric called augmented fidelity, which provides extension to standard average fidelity by taking the average over von Mises-Fisher and polar cap distributions. We show the differences between standard average and augmented fidelities.
Recent work has argued that the concepts of entanglement and nonlocality must be taken seriously even in systems consisting of only a single particle. These treatments, however, are nonrelativistic, and, if single-particle entanglement is fundamental, it should also persist in a relativistic description. Here, we consider a spin-1/2 particle in a superposition of two different velocities as viewed by an observer in a relativistically boosted inertial frame and show that the entanglement between the two velocity modes survives right up to the speed of light. We also discuss how quantum gates could be implemented in this way and apply our results to the case of a superconductor. In particular, we show that an s-wave superconductor would have p-wave components for a boosted observer.
We develop a constructive approach to generate quantum neural networks capable of representing the exact thermal states of all many-body qubit Hamiltonians. The Trotter expansion of the imaginary time propagator is implemented through an exact block encoding by means of a unitary, restricted Boltzmann machine architecture. Marginalization over the hidden-layer neurons (auxiliary qubits) creates the nonunitary action on the visible layer. Then, we introduce a unitary deep Boltzmann machine architecture in which the hidden-layer qubits are allowed to couple laterally to other hidden qubits. We prove that this wave-function is closed under the action of the imaginary time propagator and, more generally, can represent the action of a universal set of quantum gate operations. We provide analytic expressions for the coefficients for both architectures, thus enabling exact network representations of thermal states without stochastic optimization of the network parameters. In the limit of large imaginary time, the yields the ground state of the system. The number of qubits grows linearly with the number of interactions and total imaginary time for a fixed interaction order. Both networks can be readily implemented on quantum hardware via midcircuit measurements of auxiliary qubits. If only one auxiliary qubit is measured and reset, the circuit depth scales linearly with imaginary time and number of interactions, while the width is constant. Alternatively, one can employ a number of auxiliary qubits linearly proportional to the number of interactions, and circuit depth grows linearly with imaginary time only. Every midcircuit measurement has a postselection success probability, and the overall success probability is equal to the product of the probabilities of the midcircuit measurements.
Recent experiments [K. R. Brown et al., Nature (London) 471, 196 (2011); M. Harlander et al., Nature (London) 471, 200 (2011)] have demonstrated the coherent manipulations on the external vibrations of two ions, confined individually in the separated traps. Using these recently developed techniques, we propose here an approach to realize the coherent operations, e.g., the universal quantum gates, between the separated ion-trap qubits encoded by two internal atomic states of the ions. Our proposal operates beyond the usual Lamb-Dicke limits and could be applied to the scalable ion traps coupled by their vibrations.
Over the last decade and a half, superconducting circuits have advanced to the point where we can generate and detect highly-entangled states, and perform universal quantum gates. Meanwhile, the coherence properties of these systems have improved more than 10,000-fold. I will describe recent experiments, such as the latest advance in coherence using a three-dimensional implementation of qubits interacting with microwave cavities, called “3D circuit QED.” The control and strong interactions possible in superconducting circuits make it possible to generate non-classical states of light, including large superpositions known as “Schrodinger cat” states. This field has many interesting prospects both for applications in quantum information processing, and fundamental investigations of the boundary between the macroscopic classical world and the microscopic world of the quantum.
Following a recent proposal of L. Wang and D. Babikov [J. Chem. Phys. 137, 064301 (2012)], we theoretically illustrate the possibility of using the motional states of a Cd{sup +} ion trapped in a slightly anharmonic potential to simulate the single-particle time-dependent Schrödinger equation. The simulated wave packet is discretized on a spatial grid and the grid points are mapped on the ion motional states which define the qubit network. The localization probability at each grid point is obtained from the population in the corresponding motional state. The quantum gate is the elementary evolution operator corresponding to the time-dependent Schrödinger equation of the simulated system. The corresponding matrix can be estimated by any numerical algorithm. The radio-frequency field which is able to drive this unitary transformation among the qubit states of the ion is obtained by multi-target optimal control theory. The ion is assumed to be cooled in the ground motional state, and the preliminary step consists in initializing the qubits with the amplitudes of the initial simulated wave packet. The time evolution of the localization probability at the grids points is then obtained by successive applications of the gate and reading out the motional state population. The gate field is always identical for a given simulated potential, only the field preparing the initial wave packet has to be optimized for different simulations. We check the stability of the simulation against decoherence due to fluctuating electric fields in the trap electrodes by applying dissipative Lindblad dynamics.
We apply quantum control techniques to a long spin chain by acting only on two qubits at one of its ends, thereby implementing universal quantum computation by a combination of quantum gates on these qubits and indirect swap operations across the chain. It is shown that the control sequences can be computed and implemented efficiently. We discuss the application of these ideas to physical systems such as superconducting qubits in which full control of long chains is challenging.
We study a cavity-photon-switched coherent electron transport in a symmetric double quantum waveguide. The waveguide system is weakly connected to two electron reservoirs, but strongly coupled to a single quantized photon cavity mode. A coupling window is placed between the waveguides to allow electron interference or inter-waveguide transport. The transient electron transport in the system is investigated using a quantum master equation. We present a cavity-photon tunable semiconductor quantum waveguide implementation of an inverter quantum gate, in which the output of the waveguide system may be selected via the selection of an appropriate photon number or “photon frequency” of the cavity. In addition, the importance of the photon polarization in the cavity, that is, either parallel or perpendicular to the direction of electron propagation in the waveguide system is demonstrated.
We study the error threshold of topological color codes on Union Jack lattices that allow for the full implementation of the whole Clifford group of quantum gates. After mapping the error-correction process onto a statistical mechanical random three-body Ising model on a Union Jack lattice, we compute its phase diagram in the temperature-disorder plane using Monte Carlo simulations. Surprisingly, topological color codes on Union Jack lattices have a similar error stability to color codes on triangular lattices, as well as to the Kitaev toric code. The enhanced computational capabilities of the topological color codes on Union Jack lattices with respect to triangular lattices and the toric code combined with the inherent robustness of this implementation show good prospects for future stable quantum computer implementations.
We show that the coherent coupling of atomic qubits at distant nodes of a quantum network, composed of several cavities linked by optical fibers, can be arbitrarily controlled via the selective pairing of Raman transitions. The adiabatic elimination of the atomic excited states and photonic states leads to selective qubit-qubit interactions, which would have important applications in quantum-information processing. Quantum gates between any pair of distant qubits and parallel two-qubit operations on selected qubit pairs can be implemented through suitable choices of the parameters of the external fields. Selective pairing of Raman transitions also allows the generation of spin chains and cluster states without the requirement that the cavity-fiber coupling be smaller than the detunings of the Raman transitions.
Denef and Douglas have observed that in certain landscape models the problem of finding small values of the cosmological constant is a large instance of a problem that is hard for the complexity class NP (Nondeterministic Polynomial-time). The number of elementary operations (quantum gates) needed to solve this problem by brute force search exceeds the estimated computational capacity of the observable Universe. Here in this paper, we describe a way out of this puzzling circumstance: despite being NP-hard, the problem of finding a small cosmological constant can be attacked by more sophisticated algorithms whose performance vastly exceeds brute force search. In fact, in some parameter regimes the average-case complexity is polynomial. We demonstrate this by explicitly finding a cosmological constant of order 10 -120 in a randomly generated 10 9 -dimensional Arkani-Hamed–Dimopoulos–Kachru landscape.
Quantum measurements are a fundamental component of quantum computing. However, on present-day quantum computers, measurements can be more error prone than quantum gates and are susceptible to nonunital errors as well as nonlocal correlations due to measurement crosstalk. While readout errors can be mitigated in postprocessing, this is inefficient in the number of qubits due to a combinatorially large number of possible states that need to be characterized. In this work, we show that measurement errors can be tailored into a simple stochastic error model using randomized compiling, enabling the efficient mitigation of readout errors via quasiprobability distributions reconstructed from the measurement of a single preparation state in an exponentially large confusion matrix. We demonstrate the scalability and power of this approach by correcting readout errors without matrix inversion on a large number of different preparation states applied to a register of eight superconducting transmon qubits. Moreover, we show that this method can be extended to midcircuit measurements used for active feedback via quasiprobabilistic error cancellation, and we demonstrate the correction of measurement errors on an ancilla qubit used to detect and actively correct bit-flip errors on an entangled memory qubit. Our approach enables the correction of readout errors on large numbers of qubits and offers a strategy for correcting readout errors in adaptive circuits in which the results of midcircuit measurements are used to perform conditional operations on nonlocal qubits in real time.
The present work evaluates the feasibility of quantum computing with exciton qubits in coupled colloidal semiconductor nanocrystals (NCs). A strategy for manipulating two-qubit states of colloidal NC hetero-dimers is described. We show that a sequence of laser pulses with the same photon energy can bring excitonic states of a nanocrystal hetero-dimer into entanglement and perform arbitrary qubit rotations (quantum gates). Our simulations of a realistic two-particle assembly of CdSe/CdS core/shell NCs demonstrate that such two-qubit gate operations can be driven by optical parametric oscillators with a theoretical error of 0.1%. Furthermore, a strategy for upscaling two-qubit hetero-dimers to N-qubit exciton gates in semiconductor NC assemblies is discussed.