Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Magnetic properties and interlayer coupling of epitaxial Co/Cu films on Si

Thin films of Co and Co/Cu/Co trilayers with wedged Cu interlayers were grown epitaxially on Cu buffer layers on hydrogen passivated Si(001) wafers. We find that single Co layers have a well-defined four-fold anisotropy but with smaller in-plane anisotropies than observed in Co grown on Cu crystals. Ruderman–Kittel–Kasuya–Yosida (RKKY) interlayer coupling is observed in one Co/Cu/Co sample which is the smoothest of the films as measured by atomic force microscopy. Some of the films also form a dot-like structure on the surface. Intermixing at elevated temperatures between the Cu buffer and Si limits the ability to form flat surfaces to promote RKKY coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoscale calibration of n-type ZnO staircase structures by scanning capacitance microscopy

Cross-sectional scanning capacitance microscopy (SCM) was performed on n-type ZnO multi-layer structures homoepitaxially grown by molecular beam epitaxy method. Highly contrasted SCM signals were obtained between the ZnO layers with different Ga densities. Through comparison with dopant depth profiles from secondary ion mass spectroscopy measurement, it is demonstrated that SCM is able to distinguish carrier concentrations at all levels of the samples (from 2 × 10{sup 17 }cm{sup −3} to 3 × 10{sup 20 }cm{sup −3}). The good agreement of the results from the two techniques indicates that SCM can be a useful tool for two dimensional carrier profiling at nanoscale for ZnO nanostructure development. As an example, residual carrier concentration inside the non-intentionally doped buffer layer was estimated to be around 2 × 10{sup 16 }cm{sup −3} through calibration analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-performance strategies for the recent MRSF-TDDFT in GAMESS

Multiple ERI (Electron Repulsion Integral) tensor contractions (METC) with several matrices are ubiquitous in quantum chemistry. In response theories, the contraction operation, rather than ERI computations, can be the major bottleneck, as its computational demands are proportional to the multiplicatively combined contributions of the number of excited states and the kernel pre-factors. Here, this paper presents several high-performance strategies for METC. Optimal approaches involve either the data layout reformations of interim density and Fock matrices, the introduction of intermediate ERI quartet buffer, and loop-reordering optimization for a higher cache hit rate. The combined strategies remarkably improve the performance of the MRSF (mixed reference spin flip)-TDDFT (time-dependent density functional theory) by nearly 300%. The results of this study are not limited to the MRSF-TDDFT method and can be applied to other METC scenarios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of a por-Si Buffer Layer on the Structure and Morphology of Epitaxial In{sub x}Ga{sub 1 – x}N/Si(111) Heterostructures

Integrated heterostructures exhibiting nanocolumnar morphology of the In{sub x}Ga{sub 1 – x}N/Si(111) film are grown on a single-crystal silicon substrate (c-Si(111)) and a substrate with a nanoporous buffer sublayer (por-Si) by molecular-beam epitaxy with the plasma activation of nitrogen. Using a complex of structural and microscopic methods of analysis, it is shown that the growth of In{sub x}Ga{sub 1 – x}N nanocolumns on a nanoporous buffer layer offers a number of advantages over growth on c-Si. The por-Si substrate predetermines the preferential orientation of the growth of In{sub x}Ga{sub 1 – x}N nanocolumns closer to the Si(111) orientation direction and makes it possible to produce In{sub x}Ga{sub 1 – x}N nanocolumns with a higher degree of crystallographic uniformity and with a nanocolumn lateral size of ~40 nm unified over the entire surface. The growth of In{sub x}Ga{sub 1 – x}N nanocolumns on a por-Si layer yields a decrease in the strain components ε{sub xx} and ε{sub zz} and in the density of edge and screw dislocations compared to the corresponding parameters for In{sub x}Ga{sub 1 – x}N nanocolumns grown on c-Si. The In{sub x}Ga{sub 1 – x}N nanocolumnar layer fabricated on por-Si exhibits a 20% higher charge-carrier concentration compared to the layer grown on c-Si as well as a higher intensity of the photoluminescence quantum yield (+25%).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation in short-period polar GaN/AlN superlattices

We have investigated the strain relaxation mechanisms in short-period polar GaN/AlN superlattices deposited by plasma-assisted molecular-beam epitaxy, and designed to display intersubband transitions at 1.55 mum. In a first stage, we have identified the growth conditions to minimize strain relaxation, using a Ga excess to reduce the (0001) surface free energy of both GaN and AlN. Under these growth conditions, crack propagation is not observed, even for the tensile-strained superlattices grown on GaN templates. The initial misfit relaxation in the vicinity of the buffer occurs by the formation of a-type dislocations. The final strain state of the superlattice, reached after 10-20 periods, is independent of the substrate (either GaN or AlN templates). Once the steady-state conditions are reached, we observe a periodic partial relaxation of quantum wells and barriers. High-resolution transmission electron microscopy indicates that the periodic relaxation can be related to the presence of basal and prismatic stacking faults creating clusters with an in-plane length of tens of nanometers. The effect of these defects on the optical performance of the superlattices is discussed by simulation of electronic structure using an 8x8kcentre dotp Schroedinger-Poisson solver. In the presence of basal stacking faults at the quantum well interfaces, the deviation of the e{sub 1}-e{sub 2} intersubband transition with respect to the nominal value is expected to be smaller than the measured absorption line width.

36 MATERIALS SCIENCE↗

Hole-scavenging in photo-driven N 2 reduction catalyzed by a CdS-nitrogenase MoFe protein biohybrid system

The light-driven reduction of dinitrogen (N 2 ) to ammonia (NH 3 ) catalyzed by a cadmium sulfide (CdS) nanocrystal-nitrogenase MoFe protein biohybrid is dependent on a range of different factors, including an appropriate hole-scavenging sacrificial electron donor (SED). Here, the impact of different SEDs on the overall rate of N 2 reduction catalyzed by a CdS quantum dot (QD)-MoFe protein system was determined. The selection of SED was guided by several goals: (i) molecules with standard reduction potentials sufficient to reduce the oxidized CdS QD, (ii) molecules that do not absorb the excitation wavelength of the CdS QD, and (iii) molecules that could be readily reduced by sustainable processes. Earlier studies utilized buffer molecules or ascorbic acid as the SED. The effectiveness of ascorbic acid as SED was compared to dithionite (DT), triethanolamine (TEOA), and hydroquinone (HQ) across a range of concentrations in supporting N 2 reduction to NH 3 in a CdS QD-MoFe protein photocatalytic system. It was found that TEOA supported N 2 reduction rates comparable to those observed for dithionite and ascorbic acid. HQ was found to support significantly higher rates of N 2 reduction compared to the other SEDs at a concentration of 50 mM. A comparison of the rates of N 2 reduction by the biohybrid complex to the standard reduction potential (E o ) of the SEDs reveals that E o is not the only factor impacting the efficiency of hole-scavenging. These findings reveal the importance of the SED properties for improving the efficiency of hole-scavenging in the light-driven N 2 reduction reaction catalyzed by a CdS QD–MoFe protein hybrid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the accuracy of a one-dimensional approach to the solution of kinetic equations with velocity-dependent collision frequencies

The solution of many problems in light-induced gas kinetics can be simplified significantly using quantum kinetic equations in the context of the so-called one-dimensional approximation, in which the initial equations are averaged over transverse (relative to the direction of radiation) velocities. The errors introduced in such an approach are usually assumed to be small; however, this has been confirmed quantitatively only on the basis of the simplest (two- and three-level) particle models. We analyze the accuracy of the one-dimensional approximation for multilevel particles quantitatively for the light-induced drift (LID) effect in cesium atoms in the atmosphere of inert buffer gases. It is shown that in the case of the so-called “normal” LID, one-dimensional kinetic equations can always be used instead of three-dimensional equations without a risk of losing some important fine details in the dependence of the drift velocity on the radiation frequency. In the case of anomalous LID, the error of the one-dimensional approximation is also insignificant, but it can be disregarded only in the case of light buffer particles. For comparable masses of resonant and buffer particles, the one-dimensional approximation may give a noticeable error in determination of drift velocity amplitudes; however, the positions of drift velocity zeros and extrema depending on radiation-frequency detuning can be described successfully. Results show that the error introduced by using the one-dimensional approximation for multilevel particles turns out to be more significant than for the simplest particle models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the geometric corrugation of graphene on SiC(0001) by grazing incidence fast atom diffraction

We present a grazing incidence fast atom diffraction (GIFAD) study of monolayer graphene on 6H-SiC(0001). This system shows a Moiré-like 13 × 13 superlattice above the reconstructed carbon buffer layer. The averaging property of GIFAD results in electronic and geometric corrugations that are well decoupled; the graphene honeycomb corrugation is only observed with the incident beam parallel to the zigzag direction while the geometric corrugation arising from the superlattice is revealed along the armchair direction. Full-quantum calculations of the diffraction patterns show the very high GIFAD sensitivity to the amplitude of the surface corrugation. The best agreement between the calculated and measured diffraction intensities yields a corrugation height of 0.27 ± 0.03 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled Chemical Doping of Semiconductor Nanocrystals Using Redox Buffers

Semiconductor nanocrystal solids are attractive materials for active layers in next-generation optoelectronic devices; however, their efficient implementation has been impeded by the lack of precise control over dopant concentrations. Herein we demonstrate a chemical strategy for the controlled doping of nanocrystal solids under equilibrium conditions. Exposing lead selenide nanocrystal thin films to solutions containing varying proportions of decamethylferrocene and decamethylferrocenium incrementally and reversibly increased the carrier concentration in the solid by 2 orders of magnitude from their native values. This application of redox buffers for controlled doping provides a new method for the precise control of the majority carrier concentration in porous semiconductor thin films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spatially hybrid computations for streamer discharges with generic features of pulled fronts: I. Planar fronts

Streamers are the first stage of sparks and lightning; they grow due to a strongly enhanced electric field at their tips; this field is created by a thin curved space charge layer. These multiple scales are already challenging when the electrons are approximated by densities. However, electron density fluctuations in the leading edge of the front and non-thermal stretched tails of the electron energy distribution (as a cause of X-ray emissions) require a particle model to follow the electron motion. But present computers cannot deal with all electrons in a fully developed streamer. Therefore, super-particle have to be introduced, which leads to wrong statistics and numerical artifacts. The method of choice is a hybrid computation in space where individual electrons are followed in the region of high electric field and low density while the bulk of the electrons is approximated by densities (or fluids). We here develop the hybrid coupling for planar fronts. First, to obtain a consistent flux at the interface between particle and fluid model in the hybrid computation, the widely used classical fluid model is replaced by an extended fluid model. Then the coupling algorithm and the numerical implementation of the spatially hybrid model are presented in detail, in particular, the position of the model interface and the construction of the buffer region. The method carries generic features of pulled fronts that can be applied to similar problems like large deviations in the leading edge of population fronts, etc.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

LWIR detector research in InAsSb/InAs

The InAsSb/InSb strained-layer system forms a type-II superlattice in the Sb-rich region of the phase diagram. The band gap of InAsSb/InSb strained-layer superlattices grown on lattice-matched buffers can be varied continuously to produce semiconducting systems with band gaps ranging from that of InSb (0.23 eV with an absorption edge at 5.5 microns at 77 K) to 0. The semiconductor to semimetal transition occurs at As concentrations of approximately 33 percent, with the precise value dependent upon the strain and quantum well dimensions. At higher As content, the system is a semimetal. The authors fabricated photovoltaic detectors with high D asterisk at 77 K at wavelengths beyond 10 microns, and both photovoltaic and photoconductive detectors have been demonstrated with response to 15 microns. The photoconductive detectors exhibit gain of up to 100. Details of the materials growth, studies of the band structure and properties, device processing and the detector performance observed to date in these systems are discussed.

Peercy, Paul S.↗

Reduced Cu(InGa)Se 2 Thickness in Solar Cells Using a Superstrate Configuration

This project by the Institute of Energy Conversion (IEC) and the Department of Electrical and Computer Engineering at the University of Delaware sought to develop the technology and underlying science to enable reduced cost of Cu(InGa)Se 2 manufacturing by reducing the thickness of the Cu(InGa)Se 2 absorber layer by half compared to typical production. The approach to achieve this was to use the superstrate cell configuration in which light is incident on the cell through the glass. This structure facilitates optical enhancement approaches needed to achieve high efficiency with Cu(InGa)Se 2 thicknesses less than 1 µm. The primary objective was to demonstrate a Cu(InGa)Se 2 cell with absorber thickness 0.5 - 0.7 µm and 17% efficiency, along with a quantitative loss analysis to define a pathway to 20% efficiency. Additional objectives were the development of stable TCO and buffer layers or contact layers to withstand the Cu(InGa)Se 2 deposition temperature and of advanced optical enhancement methods. The underlying fundamental science needed to effectively transition these outcomes to large scale was addressed by extensive materials and device characterization and by development of comprehensive optical models. Two different superstrate configurations have been investigated. A frontwall cell is illuminated through the glass to the primary front junction of the device. This configuration has been used for previous efforts on superstrate Cu(InGa)Se 2 but performance has been limited by interdiffusion or reaction with CdS or other buffer layers. In this project, several approaches to overcome these limitations were explored using CdS, ZnO and ZnSe buffer layers. In each case, mechanisms that limit device performance were identified using detailed characterization of the materials and junctions. Due to the junction formation difficulties, efforts were concentrated on a new backwall configuration in which light is incident through the substrate into the back of the absorber layer. The primary junction is then formed after Cu(InGa)Se 2 deposition. This allows the potential benefits of superstrate cells for optical enhancement while maintaining processing advantages of the substrate configuration and avoiding the harmful effects of high temperature deposition on p-n junction formation. Backwall devices have outperformed substrate cells at absorber thicknesses of 0.1-0.5 µm through enhanced JSC due to easy incorporation of a Ag reflector and, with light incident on the absorber, the elimination of parasitic absorption in the CdS buffer. An efficiency of 9.7% has been achieved for a backwall Cu(InGa)Se 2 device with absorber thickness ~0.4 μm. A critical achievement that enabled implementation of the backwall cell was the development of a transparent back contact using MoO 3 or WO 3 . Processes for controlled deposition of each material by reactive rf sputtering from metal targets were developed. These contacts have wide bandgaps making them well-suited for application as contacts for backwall devices as well as potential use in bifacial cells and as the top cell of tandem CuInSe 2 -based devices. Optical enhancement will be critical for further improvements. Wet chemical texturing of ZnO films has been developed for a simple, low cost light-trapping scheme for backwall superstrate devices to enhance long wavelength quantum efficiency. An aqueous oxalic acid etch was developed and found to strongly texture sputtered ZnO with high haze ≈ 0.9 observed across the whole spectrum. And finally, advanced optical models have been developed to assist the characterization and optimization of Cu(InGa)Se 2 cells with thin absorbers

14 SOLAR ENERGY↗

Selective reflection of laser radiation from submicron layers of Rb and Cs atomic vapors: Applications in atomic spectroscopy

We studied selective reflection (SR) of laser radiation from a window of a nanocell with thickness L ~ λ{sub 1,2}/2 filled with Rb and Cs atoms, where λ{sub 1} = 780 nm and λ{sub 2} = 852 nm are the wavelengths resonant with the D{sub 2} laser lines for Rb and Cs, respectively. It is demonstrated that the negative derivative of the SR signal profile for L > λ/2 changes to the positive one for L < λ/2. It is shown that the real-time formation of the SR signal profile derivative (SRD) with the spectral width 30–40 MHz and located at the atomic transition is, in particular, a convenient frequency marker of D{sub 2} transitions in Rb and Cs. The amplitudes of SRD signals are proportional to the atomic transition probabilities. A comparison with the known saturated absorption (SA) method demonstrated a number of advantages, such as the absence of cross-over resonances in the SRD spectrum, the simplicity of realization, a low required power, etc. An SRD frequency marker also operates in the presence of the Ne buffer gas at a pressure of 6 Torr, which allowed us to determine the Ne–Rb collisional broadening, whereas the SA method is already inapplicable at buffer gas pressures above 0.1 Torr. The realization simplicity makes the SRD method a convenient tool for atomic spectroscopy. Our theoretical model well describes the SRD signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the Anisotropic Elastoplastic Properties of β-Ga{sub 2}O{sub 3} Films Synthesized on SiC/Si Substrates

The structural and mechanical properties of gallium oxide films grown on silicon crystallographic planes (001), (011), and (111) with a buffer layer of silicon carbide are investigated. Nanoindentation was used to study the elastoplastic properties of gallium oxide and also to determine the elastic recovery parameter of the films under study. The tensile strength, hardness, elasticity tensor, compliance tensor, Young’s modulus, Poisson’s ratio, and other characteristics of gallium oxide were calculated using quantum chemistry methods. It was found that the gallium oxide crystal is auxetic because, for some stretching directions, the Poisson’s ratio takes on negative values. The calculated values correspond quantitatively to the experimental data. It is concluded that the elastoplastic properties of gallium oxide films approximately correspond to the properties of bulk crystals and that a change in the orientation of the silicon surface leads to a significant change in the orientation of gallium oxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comprehensive study of the electronic and optical behavior of highly degenerate p-type Mg-doped GaN and AlGaN

The bulk and 2-dimensional (2D) electrical transport properties of heavily Mg-doped p-type GaN films grown on AlN buffer layers by Metal Modulated Epitaxy are explored. Distinctions are made between three primary p-type conduction mechanisms: traditional valence band conduction, impurity band conduction, and 2D conduction within a 2D hole gas at a hetero-interface. The bulk and 2D contributions to the overall carrier transport are identified and the relative contributions are found to vary strongly with growth conditions. Films grown with III/V ratio less than 1.5 exhibit high hole concentrations exceeding 2 × 10{sup 19} cm{sup −3} with effective acceptor activation energies of 51 meV. Films with III/V ratios greater than 1.5 exhibit lower overall hole concentrations and significant contributions from 2D transport at the hetero-interface. Films grown with III/V ratio of 1.2 and Mg concentrations exceeding 2 × 10{sup 20} cm{sup −3} show no detectable inversion domains or Mg precipitation. Highly Mg-doped p-GaN and p-AlGaN with Al fractions up to 27% similarly exhibit hole concentrations exceeding 2 × 10{sup 19} cm{sup −3}. The p-GaN and p-Al{sub 0.11}Ga{sub 0.89}N films show broad ultraviolet (UV) photoluminescence peaks, which intercept the valence band, supporting the presence of a Mg acceptor band. Finally, a multi-quantum-well light-emitting diode (LED) and p-i-n diode are grown, both of which demonstrate rectifying behavior with turn-on voltages of 3–3.5 V and series resistances of 6–10 Ω without the need for any post-metallization annealing. The LED exhibits violet-blue luminescence at 425 nm, while the p-i-n diode shows UV luminescence at 381 nm, and both devices still show substantial light emission even when submerged in liquid nitrogen at 77 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CMOS-Compatible Ultrathin Superconducting NbN Thin Films Deposited by Reactive Ion Sputtering on 300 mm Si Wafer

We report a milestone in achieving large-scale, ultrathin (~5 nm) superconducting NbN thin films on 300 mm Si wafers using a high-volume manufacturing (HVM) industrial physical vapor deposition (PVD) system. The NbN thin films possess remarkable structural uniformity and consistently high superconducting quality across the entire 300 mm Si wafer, by incorporating an AlN buffer layer. High-resolution X-ray diffraction and transmission electron microscopy analyses unveiled enhanced crystallinity of (111)-oriented δ-phase NbN with the AlN buffer layer. Notably, NbN films deposited on AlN-buffered Si substrates exhibited a significantly elevated superconducting critical temperature (~2 K higher for the 10 nm NbN) and a higher upper critical magnetic field or H c2 (34.06 T boost in H c2 for the 50 nm NbN) in comparison with those without AlN. These findings present a promising pathway for the integration of quantum-grade superconducting NbN films with the existing 300 mm CMOS Si platform for quantum information applications.

36 MATERIALS SCIENCE↗

Growth and stability of Pb intercalated phases under graphene on SiC

Graphene intercalation is a novel way to control graphene's band structure and generate two-dimensional quantum materials with unusual spintronic and electronic properties. In spite of its importance, information about the intercalation mechanism is lacking, especially the role of low density domain boundaries between regions of graphene of different thickness. With high resolution surface diffraction we have systematically studied Pb intercalation on epi-graphene grown on SiC, with domain boundaries between buffer and single layer graphene. By examining the evolution of different diffraction spots as a function of tempertature, the location of Pb and stability of the intercalated phases underneath were determined.

36 MATERIALS SCIENCE↗