Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Impact damage resistance of composite fuselage structure, part 1

The impact damage resistance of laminated composite transport aircraft fuselage structures was studied experimentally. A statistically based designed experiment was used to examine numerous material, laminate, structural, and extrinsic (e.g., impactor type) variables. The relative importance and quantitative measure of the effect of each variable and variable interactions on responses including impactor dynamic response, visibility, and internal damage state were determined. The study utilized 32 three-stiffener panels, each with a unique combination of material type, material forms, and structural geometry. Two manufacturing techniques, tow placement and tape lamination, were used to build panels representative of potential fuselage crown, keel, and lower side-panel designs. Various combinations of impactor variables representing various foreign-object-impact threats to the aircraft were examined. Impacts performed at different structural locations within each panel (e.g., skin midbay, stiffener attaching flange, etc.) were considered separate parallel experiments. The relationship between input variables, measured damage states, and structural response to this damage are presented including recommendations for materials and impact test methods for fuselage structure.

Dost, E. F.↗

Operational design factors for NASP derived vehicles

The factors that significantly affect the operability of aerospace planes are identified and considered in terms of the development of the National Aerospace Plane (NASP). The aircraftlike vehicle can be affected by variables related to the structure, propulsion, and mechanical elements of the design. The requirements to control the factors are listed including robustness, fuels and propellants, maintainability, autonomy, and development testing. The details of the requirements indicate critical factors such as the strength-to-weight ratios of the materials, propellant-system components that can withstand 5000 consecutive cycles, and low vehicle-failure probabilities. The NASP program is concluded to require: (1) models for quantitative operational assessments; (2) a modular design for the NASP structure; (3) computer-technology integration; and (4) technologies to support and normalize cryogenic operations.

Hickman, R. A.↗

Measurements of the streamwise vortical structures in a plane mixing layer

The 3D structure of a plane two-stream mixing layer of velocity ratio 0.6 and originating from laminar initial boundary layers was investigated through direct measurements made in a specially constructed mixing-layer wind tunnel. The main objective of the study was to establish quantitatively the presence and the role of the secondary streamwise vortex structure (of the kind that has been shown in past flow visualization investigations to ride among the primary spanwise vortices) in the development of a plane turbulent mixing layer at relatively high Reynolds numbers. Results indicate that the instability leading to the formation of streamwise vortices is initially amplified just downstream of the first spanwise roll-up. The streamwise vortices, which first appear in clusters containing vorticity of both signs, realign further downstream to form counterrotating pairs. Due to the amalgamation of like-sign vortices, the streamwise vortex spacing increases in a stepwise fashion.

Bell, James H.↗

A model of the excitation of orderly structures in a shear layer

The artificial excitation of shear layers is investigated theoretically and experimentally. The present paper describes quantitatively the coupling between exciting sound field and shear layer fluctuations. The mathematical model is restricted to low Strouhal numbers at which large scale structures are occurring. The theory does not contain any empirical constants and it is confirmed by the experiments in the expected validity range.

Bechert, D. W.↗

Promising quantitative nondestructive evaluation techniques for composite materials

Some recent results in the area of the ultrasonic, acoustic emission, thermographic, and acousto-ultrasonic NDE of composites are reviewed. In particular, attention is given to the progress in the use of ultrasonic attenuation, acoustic emission (parameter) delay, liquid-crystal thermography, and the stress wave factor in structural integrity monitoring of composite materials. The importance of NDE flaw significance characterizations is emphasized since such characterizations can directly indicate the appropriate NDE technique sensitivity requirements. The role of the NDE of flawed composites with and without overt defects in establishing quantitative accept/reject criteria for structural integrity assessment is discussed.

Williams, J. H., Jr.↗

Eutectic Experiment Development for Space Processing

A ground base test plan and a specimen evaluation scheme have been developed for the aluminum-copper eutectic solidification experiment to be run in the M518 multipurpose electric furnace during the Skylab mission. Besides thermal and solidification studies a detailed description is given of the quantitative metallographic technique which is appropriate for characterizing eutectic structures. This method should prove a key tool for evaluating specimen microstructure which is the most sensitive indicator of changes produced during solidification. It has been recommended that single grain pre-frozen eutectic specimens be used to simplify microstructural evaluation and to eliminate any porosity in the as-cast eutectic specimens. High purity (99.999%) materials from one supplier should be employed for all experiments. Laboratory studies indicate that porosity occurs in the MRC as-cast eutectic ingots but that this porosity can be eliminated by directional freezing. Chemical analysis shows that the MRC ingots are slightly Al rich and contain about .03% impurity. Because of the impurity content the lower cooldown rate (1.2 C/min) should be used for eutectic freezing if MRC material is used in the M518 furnace.

Hopkins, R. H.↗

The galloping chromosphere

Oscillating velocity fields can be observed on H-alpha filtergrams as a shifting pattern of intensity fluctuations known as 'the galloping chromosphere'. The characteristics of this activity are those of horizontal running waves of typical period of about 300 sec and long wavelength (about 20,000 km) that can be interpreted as acoustic-gravity waves propagating in the acoustic domain. Periods are longer in dark, structured regions, and in fibrils, and the change is quantitatively consistent with the reduction of resonance frequency in a magnetic field of 1 to 10 gauss. These easily observed fluctuations thus offer a means of estimating magnetic-field strength at specific locations in the chromosphere. Phase velocities are high, ranging upward from typical values between 50 and 100 km per sec, and tending to be lower in active regions and toward the limb.

Sawyer, C.↗

The application of digital computers to near-real-time processing of flutter test data

Procedures used in monitoring, analyzing, and displaying flight and ground flutter test data are presented. These procedures include three digital computer programs developed to process structural response data in near real time. Qualitative and quantitative modal stability data are derived from time history response data resulting from rapid sinusoidal frequency sweep forcing functions, tuned-mode quick stops, and pilot induced control pulses. The techniques have been applied to both fixed and rotary wing aircraft, during flight, whirl tower rotor systems tests, and wind tunnel flutter model tests. An hydraulically driven oscillatory aerodynamic vane excitation system utilized during the flight flutter test programs accomplished during Lockheed L-1011 and S-3A development is described.

Hurley, S. R.↗

Quantitative thermal characterization of thin plates

The principles of quantitative thermal testing of the mechanical integrity of platelike structures are discussed. In this technique, a scanned laser pulse is used to inject a thermal pattern in a sample, and a thermal IR imager is used to document the evolution of the pattern subsequent to injection. The measurements are remote, noncontacting, and one-sided, and the algorithms used to obtain diffusivity are all emissivity-independent. The results yielded by application of the three analytical techniques, used to obtain diffusivity values from the image data on stainless steel, a graphite-epoxy composite, brass, and aluminum 2024 samples, are presented.

Welch, C. S.↗

Electric and magnetic observations of the structure of standing waves in the magnetosphere

Electric and magnetic field instruments on the DE 1 spacecraft provided observations of toroidal standing wave oscillations of magnetic shells in 1981 and 1982. The amplitude and nodal structure of these waves, as a function of increasing magnetic latitude, was studied and compared with model calculations of these waves. Eight pulsation events were selected for study. The pulsations in these events ranged in period from 20 to 300 s. They were observed at L values between 2.8 and 9.7 and at magnetic latitudes from the equator to 48 deg. The duration of these pulsation events was 20 to 30 min, and they usually consisted of a 5- to 10-min growth in amplitude, a 5- to 10-min interval of fluctuating amplitude, and a 5- to 20-min interval of decreasing amplitude. The relative E and B amplitudes and the phase relations between the E and B waves could be qualitatively explained by the nodal structure of the waves predicted by model calculations. Detailed quantitative comparisons of E and B amplitudes were in agreement with more recent model calculations. In a few cases, electron densities were also available as derived from plasma frequency observations; in these cases the standing wave periods calculated were reasonably close to, but somewhat less than, the observed periods.

Cahill, L. J., Jr.↗

Anharmonicity and the interstellar polycyclic aromatic hydrocarbon infrared emission spectrum

The hypothesis that interstellar infrared emission originates from vibrationally excited polycyclic aromatic hydrocarbons (PAHs) requires that emission can arise from all vibrational levels that are energetically accessible. Due to anharmonicity, the emission from the upper vibrational levels is shifted to longer wavelengths from that of the v = 1-0 transition. It is shown that structure in the 3-micron region is readily and quantitatively explained by emission from upper vibrational levels of excited PAHs that contain a maximum of 20-30 carbon atoms. The asymmetrical broadening of the 11.3-micron emission band may also be due to anharmonicity.

Barker, John R.↗

Probing Composites With Integrated Polar Backscatter

Integrated polar backscatter (IPB) is technique wherein ultrasonic probe signal incident upon part at non-normal angle of incidence and resulting scattered ultrasonic signal measured and integrated to produce single NDE quantity. Method used to detect and evaluate quantitatively internal conditions of composite materials. One evaluates internal structure of fiber composite and detects such structural defects as those caused by broken fibers, porosity, and inclusions.

Madaras, Eric I.↗

A study of the time variability of Jupiter's atmospheric structure

Aspects of the time-variable nature of the Jovian atmosphere are addressed using high-resolution photometrically calibrated multicolored imaging data obtained over two Jovian apparitions. During the period of observations, Jupiter's South Equatorial Belts (SEB) underwent a drastic brightening and its Equatorial Zone gradually darkened throughout the period. Based on the data, vertically inhomogeneous atmospheric structure models are constructed and used to make direct quantitative comparisons between different latitudinal regions and different epochs. The drastic brightening of the SEB is explained by an increase in both the optical thickness and the single-scattering albedo of the upper tropospheric cloud.

Kuehn, D. M.↗

The Theories of Turbulence

The theory of turbulence reached its full growth at the end of the 19th century as a result of the work by Boussinesq and Reynolds. It then underwent a long period of stagnation which ended under the impulse given to it by the development of wind tunnels caused by the needs of aviation. Numerous researchers, attempted to put Reynolds' elementary statistical theory into a more precise form. During the war, some isolated scientists - von Weizsacker and Heisenberg in Germany, Kolmogoroff in Russia, Onsager in the U.S.A. - started a program of research. By a system of assumptions which make it possible to approach the structure of turbulence in well-defined limiting conditions quantitatively, they obtained a certain number of laws on the correlations and the spectrum. Since the late reports have improved the mathematical language of turbulence, it was deemed advisable to start with a detailed account of the mathematical methods applicable to turbulence, inspired at first by the work of the French school, above all for the basic principles, then the work of the foreigners, above all for the theory of the spectrum.

MECHANICS, STATISTICAL↗

The effect of sensor spacing on wind measurements at the Shuttle Landing Facility

This document presents results of a field study of the effect of sensor spacing on the validity of wind measurements at the Space Shuttle landing Facility (SLF). Standard measurements are made at one second intervals from 30 foot (9.1m) towers located 500 feet (152m) from the SLF centerline. The centerline winds are not exactly the same as those measured by the towers. This study quantifies the differences as a function of statistics of the observed winds and distance between the measurements and points of interest. The field program used logarithmically spaced portable wind towers to measure wind speed and direction over a range of conditions. Correlations, spectra, moments, and structure functions were computed. A universal normalization for structure functions was devised. The normalized structure functions increase as the 2/3 power of separation distance until an asymptotic value is approached. This occurs at spacings of several hundred feet (about 100m). At larger spacings, the structure functions are bounded by the asymptote. This enables quantitative estimates of the expected differences between the winds at the measurement point and the points of interest to be made from the measured wind statistics. A procedure is provided for making these estimates.

Merceret, Francis J.↗

The application of decision analysis to life support research and technology development

Applied research and technology development is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Decision making regarding which technologies to advance and what resources to devote to them is a challenging but essential task. In the application of life support technology to future manned space flight, new technology concepts typically are characterized by nonexistent data and rough approximations of technology performance, uncertain future flight program needs, and a complex, time-intensive process to develop technology to a flight-ready status. Decision analysis is a quantitative, logic-based discipline that imposes formalism and structure to complex problems. It also accounts for the limits of knowledge that may be available at the time a decision is needed. The utility of decision analysis to life support technology R & D was evaluated by applying it to two case studies. The methodology was found to provide insight that is not possible from more traditional analysis approaches.

Ballin, Mark G.↗

Study of Fluid Flow Control in Protein Crystallization using Strong Magnetic Fields

An important component in biotechnology, particularly in the area of protein engineering and rational drug design is the knowledge of the precise three-dimensional molecular structure of proteins. The quality of structural information obtained from X-ray diffraction methods is directly dependent on the degree of perfection of the protein crystals. As a consequence, the growth of high quality macromolecular crystals for diffraction analyses has been the central focus for biochemists, biologists, and bioengineers. Macromolecular crystals are obtained from solutions that contain the crystallizing species in equilibrium with higher aggregates, ions, precipitants, other possible phases of the protein, foreign particles, the walls of the container, and a likely host of other impurities. By changing transport modes in general, i.e., reduction of convection and sedimentation, as is achieved in "microgravity", researchers have been able to dramatically affect the movement and distribution of macromolecules in the fluid, and thus their transport, formation of crystal nuclei, and adsorption to the crystal surface. While a limited number of high quality crystals from space flights have been obtained, as the recent National Research Council (NRC) review of the NASA microgravity crystallization program pointed out, the scientific approach and research in crystallization of proteins has been mainly empirical yielding inconclusive results. We postulate that we can reduce convection in ground-based experiments and we can understand the different aspects of convection control through the use of strong magnetic fields and field gradients. Whether this limited convection in a magnetic field will provide the environment for the growth of high quality crystals is still a matter of conjecture that our research will address. The approach exploits the variation of fluid magnetic susceptibility with concentration for this purpose and the convective damping is realized by appropriately positioning the crystal growth cell so that the magnetic susceptibility force counteracts terrestrial gravity. The general objective is to test the hypothesis of convective control using a strong magnetic field and magnetic field gradient and to understand the nature of the various forces that come into play. Specifically we aim to delineate causative factors and to quantify them through experiments, analysis and numerical modeling. Once the basic understanding is obtained, the study will focus on testing the hypothesis on proteins of pyruvate dehydrogenase complex (PDC), proteins E1 and E3. Obtaining high crystal quality of these proteins is of great importance to structural biologists since their structures need to be determined. Specific goals for the investigation are: 1. To develop an understanding of convection control in diamagnetic fluids with concentration gradients through experimentation and numerical modeling. Specifically solutal buoyancy driven convection due to crystal growth will be considered. 2. To develop predictive measures for successful crystallization in a magnetic field using analyses and numerical modeling for use in future protein crystal growth experiments. This will establish criteria that can be used to estimate the efficacy of magnetic field flow damping on crystallization of candidate proteins. 3. To demonstrate the understanding of convection damping by high magnetic fields to a class of proteins that is of interest and whose structure is as yet not determined. 4. To compare quantitatively, the quality of the grown crystals with and without a magnetic field. X-ray diffraction techniques will be used for the comparative studies. In a preliminary set of experiments, we studied crystal dissolution effects in a 5 Tesla magnet available at NASA Marshall Space Flight Center (MSFC). Using a Schlieren setup, a 1mm crystal of Alum (Aluminum-Potassium Sulfate) was introduced in a 75% saturated solution and the resulting dissolution plume was observed. The experiment was conducted both in the presence and absence of a magnetic field gradient. The magnet produces a gradient field of approx. 1 Tesla2/cm. Image analysis of the recorded images indicated an enhanced plume velocity that was of the order of the measurement limit. For this experiment, both the gradient and gravity fields are in the same direction resulting in an enhanced effective gravity that tends to accelerate the observed plume velocity. While the results are not conclusive, pending further tests, it clearly points out the inadequacy of the MSFC magnet for conducting protein crystallization experiments and the need for a stronger magnet. In spacebased experiments, however, where the gravitational effects are small, only a weak magnetic field will be required to control or mitigate the effects of convective contamination.

Ramachandran, Narayanan↗

Modeling the Information Age Combat Model: An Agent-Based Simulation of Network Centric Operations

The Information Age Combat Model (IACM) was introduced by Cares in 2005 to contribute to the development of an understanding of the influence of connectivity on force effectiveness that can eventually lead to quantitative prediction and guidelines for design and employment. The structure of the IACM makes it clear that the Perron-Frobenius Eigenvalue is a quantifiable metric with which to measure the organization of a networked force. The results of recent experiments presented in Deller, et aI., (2009) indicate that the value of the Perron-Frobenius Eigenvalue is a significant measurement of the performance of an Information Age combat force. This was accomplished through the innovative use of an agent-based simulation to model the IACM and represents an initial contribution towards a new generation of combat models that are net-centric instead of using the current platform-centric approach. This paper describes the intent, challenges, design, and initial results of this agent-based simulation model.

Deller, Sean↗