Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “precipitation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Global Precipitation Means and Variations with the New Version of GPCP

Knowledge of global precipitation means, patterns and variations is essential for understanding the global water cycle. The observation-based global analysis of the Global Precipitation Climatology Project (GPCP) has been a key input to many such studies, including those related to means of the global (and regional) water and energy cycles. A new version (Version 3.1) of the GPCP monthly analysis is now available (1983-2019), with finer spatial resolution (0.5º latitude/longitude), updated satellite algorithms, latest gauge analysis over land from the Global Precipitation Climatology Center (GPCC), and with ocean climatologies adjusted using information from the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM) mission and CloudSat. The presentation will give key findings from the new analysis, compare with the previous version, link to studies of the water cycle and compare to CMIP6 climate model results. The GPCP Monthly V3.1 analysis uses a Tropical Composite Climatology (TCC) using 22 years (1998-2019) of TRMM and GPM-based surface precipitation estimates from passive microwave, radar and combined passive microwave and radar observations to adjust the long-term mean values in the tropics over ocean. At higher latitudes over ocean climatological values of merged CloudSat and GPM combined passive microwave and radar surface precipitation estimates are used. The result of the new algorithms and procedures is an ocean mean value 60º N to 60º S of 3.2 mm/d, an increase of 7% from the older V2.3. Over land the gauge analysis (from GPCC in Germany), combined with satellite estimates results in a small decrease (~ 0.5%) from the previous version, giving a total global precipitation mean of 2.81 mm/d for V3.1, an increase of 4.5%. Variations from inter-annual to trend scales over most of the ocean are driven by the Colorado State University (CSU) Goddard Profiling (GPROF) algorithm applied to SSMI/SSMIS satellite data. The new GPCP version retains a near zero trend of global precipitation, with significant positive trends in the deep tropics along the Pacific ITCZ and elsewhere, countered by middle latitude decreases, very similar to the previous version of the GPCP Monthly analysis. The pattern of trends is similar to that of AMIP climate model results, driven by observed SSTs for the period in question, but very different from results for “free-running” CMIP historical ensembles, likely due in part to the relatively short comparison period and effects of inter-decadal variations in the GPCP and AMIP results that are not in the “history” models. Interannual variations are also nearly the same in the new version, but with finer detail, although ENSO variations over the ocean have slightly larger amplitude than before, an effect likely related to the change in ocean satellite algorithm used in Version 3. For precipitation intensity (percentiles) at the monthly scale, especially in the tropics, GPCP shows a positive trend for the upper one third of the percentiles (Pct ≥ 70th) and a much weaker positive trend for the lowest percentiles (Pct ≤ 10th), while negative trends appear for the middle one-half percentiles (20th-65th). AMIP results agree with those from the GPCP in terms of the sign of the changes/trends for high and intermediate percentiles. The CMIP historical results also agree in the sign of the trends, but the trends are weaker. Comparisons with other types of CMIP historical simulations including the GHG-only, aerosol-only, and nature-only runs suggest that the observed changes/trends in precipitation amount and intensity during the GPCP period are dominated by a combination of the effects of the Pacific Decadal Oscillation (PDO) and anthropogenic GHG-related surface warming.

Robert Adler↗
NASA NTRS2021

Improving Cross-track Scanning Radiometers’ Precipitation Retrieval over Ocean by Morphing

Previous studies showed that conical scanning radiometers greatly outperform cross-track scanning radiometers for precipitation retrieval over ocean. This study demonstrates a novel approach to improve precipitation rates at the cross-track scanning radiometers’ observation time by propagating the conical scanning radiometers’ retrievals to the cross-track scanning radiometers’ observation time. The improved precipitation rate is a weighted average of original cross-track radiometers’ retrievals and retrievals propagated from a conical scanning radiometer. The cross-track scanning radiometers include the Advanced Technology Microwave Sounder (ATMS) on board the SNPP satellite and four Microwave Humidity Sounders (MHSs). The conical scanning radiometers include the Advanced Microwave Scanning Radiometer 2 (AMSR2) and three Special Sensor Microwave Imager/Sounders (SSMISs), while the precipitation retrievals from the Global Precipitation Measurement (GPM) Microwave Imager (GMI) are taken as the reference. Results show that the morphed precipitation rates agree much better with the reference. The degree of improvement depends on several factors, including the propagated precipitation source, the time interval between the cross-track scanning radiometer and the conical scanning radiometer, the precipitation type (convective versus stratiform), the precipitation events’ size, and the geolocation. The study has potential to greatly improve high-impact weather systems monitoring (e.g., hurricanes) and multisatellite precipitation products. It may also enhance the usefulness of future satellite missions with cross-track scanning radiometers on board.

Yalei You↗
NASA NTRS2023

NASA’s Atmosphere Observing System (AOS), From A Precipitation Perspective

NASA is developing the Atmosphere Observing System (AOS) mission as part of its Earth System Observatory (ESO) in response to priorities identified in the 2017 Earth Science Decadal Survey. AOS addresses the Decadal Survey’s call for missions measuring the targeted observables “clouds, convection, and precipitation”; “aerosol and cloud radiative properties”, and “aerosol vertical profiles”. AOS is currently in Phase A, the concept and technology development phase, with plans for satellite launches in the late 2020’s and early 2030’s, and suborbital measurements to include field campaigns after those satellite launches. Key precipitation-related instrumentation includes Doppler radars capable of measuring clouds and precipitation, and passive microwave radiometers with channels between 89-700 GHz. Other instrumentation includes dual-wavelength backscatter lidars, a multi-wavelength and multi-angle polarimeter, a far infrared imaging radiometer, and aerosol and moisture limb sounders that will contribute to studies of coupled aerosol-cloud-precipitation processes. From the perspective of precipitation science, a Ku-band Doppler radar in a 55° inclined orbit provided by JAXA will continue the heritage of precipitation radar measurements made by the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Mission (GPM), while adding information about Doppler-derived particle vertical motions. With assumptions about particle terminal velocities, the Doppler measurements will enable estimates of the vertical air motion in storms. A higher frequency (W and/or Ka band) radar on a satellite in a polar sun-synchronous orbit will add similar information with greater sensitivity to clouds and to light precipitation. Passive microwave radiometers for AOS will be less capable than those from TRMM and GPM from a precipitation-measurement perspective, but more capable of adding information about cloud processes. Synergies among these and other instruments are expected to advance process-level understanding of aerosols, clouds, and precipitation.

Daniel J Cecil↗
DOE OSTI2022

Microstructural Characterization of A709 Commercial Heats with Precipitation Treatment

This report discusses work conducted at Idaho National Laboratory in fiscal year 2022 associated with the precipitates in Alloy 709 (A709). The purpose of this work is to support the development of the A709 Code Cases to qualify A709 in Section III, Division 5 of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code. This would permit the use of A709 for elevated-temperature nuclear construction. This work encompassed two broad goals. The first goal was to understand the microstructure of the second commercial heat of plate A709 purchased through the Advanced Reactors Technologies Program in both the solution-annealed and precipitation-treated conditions. Transmission electron microscopy was utilized to characterize these microstructures. Direct comparisons were then made between the solution-annealed and precipitation-treated conditions as well as between the first and second commercial heats of plate A709. The second goal was to understand the impact of variations in the time and temperature of the precipitation treatment on the properties of A709. The precipitation treatment temperature was varied from 750°C to 800°C for times ranging from 3 hours to 30 hours. The hardness of each precipitation treatment variation was measured. All of the precipitation treatment variations investigated besides a specimen from the second commercial heat of plate A709 precipitation treated at 800? for 9 hours met the room-temperature hardness requirement specified in ASTM A213 and SA-213 for UNS S31025. The hardness measured for the specimen from the second commercial heat of plate A709 that was precipitation treated at 800? for 9 hours is considered an outlier. The next step is to look at the extremes of the precipitation treatment variations investigated and conduct elevated-temperature mechanical testing. The purpose of this testing would be to assess if these time and temperature variations have any impact on the mechanical performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Parametric study and speciation analysis of rare earth precipitation using oxalic acid in a chloride solution system

Oxalic acid precipitation is a common step in the purification of rare earth elements (REE) from a concentrated pregnant leach solution (PLS). However, the presence of contaminants such as Al, Fe, and Ca in given amounts decreases the REE precipitation efficiency and product purity while also increasing the amount of oxalic acid needed to maximize recovery. As such, a statistically designed test program was performed to identify the optimal conditions necessary for a relatively low REE content PLS containing elevated concentrations of contaminant ions. The performance objective was maximization of REE precipitation efficiency while minimizing the oxalic acid dosage. A central composite design was utilized to quantify performance impacts and identify the ultimate set of parameter values for oxalic acid dosage, Fe(III) contamination concentration, solution pH, and reaction temperature. The resultant model suggested that oxalic acid dosage and reaction pH are the most significant factors for the REE precipitation efficiency, followed by the interaction of oxalic dosage and Fe concentration. Test results indicate that increasing the oxalic acid concentration from 0 g/L to 80 g/L improved the REE precipitation efficiency from approximately 4.2% to 95.0%. Furthermore, raising the solution pH from 0.5 to 2.5 considerably enhanced the precipitation efficiency from 0.0% to 98.9%. A solution temperature elevation decreased REE recovery, which indicated an exothermic reaction between REEs and oxalate anions. Finally, a high level of Fe contamination adversely impacted REE precipitation efficiency. Here, to further the understanding of the REE-oxalate system, a fundamental solution chemistry study was performed using the equilibrium constants of the reactions. The study resulted in the development of oxalate speciation diagrams and provided an analysis of the REE precipitation characteristics at various oxalate anion concentrations and Fe(III) contamination levels using MINTEQ software. The dominant Fe(III) species in the solution system were found to be Fe-(C 2 O 4 ) 3 3- , Fe-(C 2 O 4 ) 2- , and Fe-(C 2 O 4 ) + , which consume the majority of the oxalate anions. The simulated model was found to be in agreement with the experimental findings and helped to explain the adverse impact of increased iron concentrations on REE precipitation efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exploratory Precipitation Metrics: Spatiotemporal Characteristics, Process-Oriented, and Phenomena-Based

Abstract Precipitation sustains life and supports human activities, making its prediction one of the most societally relevant challenges in weather and climate modeling. Limitations in modeling precipitation underscore the need for diagnostics and metrics to evaluate precipitation in simulations and predictions. While routine use of basic metrics is important for documenting model skill, more sophisticated diagnostics and metrics aimed at connecting model biases to their sources and revealing precipitation characteristics relevant to how model precipitation is used are critical for improving models and their uses. This paper illustrates examples of exploratory diagnostics and metrics including 1) spatiotemporal characteristics metrics such as diurnal variability, probability of extremes, duration of dry spells, spectral characteristics, and spatiotemporal coherence of precipitation; 2) process-oriented metrics based on the rainfall–moisture coupling and temperature–water vapor environments of precipitation; and 3) phenomena-based metrics focusing on precipitation associated with weather phenomena including low pressure systems, mesoscale convective systems, frontal systems, and atmospheric rivers. Together, these diagnostics and metrics delineate the multifaceted and multiscale nature of precipitation, its relations with the environments, and its generation mechanisms. The metrics are applied to historical simulations from phases 5 and 6 of the Coupled Model Intercomparison Project. Models exhibit diverse skill as measured by the suite of metrics, with very few models consistently ranked as top or bottom performers compared to other models in multiple metrics. Analysis of model skill across metrics and models suggests possible relationships among subsets of metrics, motivating the need for more systematic analysis to understand model biases for informing model development.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2023

Changing Characteristics of Tropical Extreme Precipitation-Cloud Regimes in Warmer Climates

In this paper, we have investigated the changing characteristics of climatic scale (monthly) tropical extreme precipitation in warming climates using the Energy Exascale Earth System Model (E3SM). Results are from Atmospheric Model Intercomparison Project (AMIP)-type simulations driven by a) control experiment with present-day sea surface temperature (SST) and CO 2 concentration, b) P4K, same as in a) but with uniform increase by 4K in SST globally, and c) same as in a), but with imposed SST and CO 2 concentration from outputs of coupled E3SM forced by 4xCO 2 concentration. We find that as the surface warms under P4K and 4xCO 2 , both convective and stratiform rain increase. Importantly, there is increasing fractional contribution of stratiform rain as a function of precipitation intensity, with the most extreme but rare events occurring preferentially over land more than ocean, more so under 4xCO 2 than P4K. Extreme precipitation is facilitated by increased precipitation efficiency, reflecting accelerated rates of recycling of precipitation-cloud water (both liquid and ice phases) in regions with colder anvil cloud tops. Changes in vertical profiles of clouds, condensation heating and vertical motions indicate increasing precipitation-cloud-circulation organization from control, P4K to 4xCO 2 . Results suggest that large-scale ocean warming, i.e., P4K, is the primary cause contributing to organization structure resembling the well-known Mesoscale Convective System (MCS) for increased extreme precipitation on shorter (hourly to daily) time scales. Additional 4xCO 2 atmospheric radiative heating, and dynamically consistent anomalous SST further amplifies the MCS organization under P4K. Analyses of the surface moist static energy distribution show that increase in surface moisture (temperature) under P4K and 4xCO 2 is the key driver leading to enhanced convective instability over tropical ocean (land). However, the fast and large increase in land surface temperature and lack of available local moisture result in strong reduction in land surface relative humidity, reflecting severe drying and enhanced convective inhibition (CIN). It is argued that very extreme and rare “record-breaking” precipitation events found over land under P4K, more so under 4xCO 2 , are likely due to the delayed onset of deep convection, i.e., the longer the suppression of deep convection by CIN, the more severe the extreme precipitation when eventually occur, due to the release of large amount of stored surplus convective available potential energy in the lower troposphere during prolonged CIN.

climate-scale extreme tropical precipitation↗
DOE OSTI2025

Stimulating β -Series Precipitation in Mg–Nd Alloys Via Microalloying: A Comparison of Electron Microscopy and Small-Angle Scattering Techniques

The Mg–Nd alloy system is of particular interest in the development of high-strength, lightweight structural alloys due to the formation of strengthening metastable Mg–Nd β-series precipitates during heat treatment. The strengthening is primarily provided by a combination of the β''' and β 1 precipitation. It is therefore important to understand how the precipitation behavior can be enhanced by other common alloying elements. In this work, the effects of 0.2 wt pct Zn and Ca on β-series precipitation were studied. Small-angle/ultra-small-angle X-ray scattering (SAXS/USAXS) techniques in combination with scanning transmission electron microscopy (STEM) were used to study the evolution of precipitation microstructure. Here, it is found that the Zn additions refine the precipitates, leading to an increase in hardness with aging at 200 °C. On the other hand, the Ca additions result in an acceleration in the formation of larger β 1 precipitates and chains which provides less strengthening. The β 1 chains are surrounded by precipitate-free zones (PFZs) that further contribute to the decreases in hardness observed in the over-aged condition. This paper demonstrated that SAXS/USAXS provides a powerful tool for an in situ study of the early stages of precipitation in the Mg–Nd-based alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Co-precipitation induces changes to iron and carbon chemistry and spatial distribution at the nanometer scale

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this work, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe 2 O 3 •0.5H 2 O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unraveling the dislocation–precipitate interactions in high-entropy alloys

The precipitates play a significant role in not only enhancing the strength, but also maintaining the high toughness in alloys. However, the interactions of the nanoscale precipitates with dislocations in the high entropy alloys (HEAs) are difficult to observe directly by in-situ TEM experiments due to the limits of the resolution and time. Here, using atomic simulations we report the synergistic strengthening of the coherent precipitate and atomic-scale lattice distortion in the HEAs at cryogenic/elevated temperatures. The effects of temperature, chemical disorder, precipitate spacing, precipitate size, elemental segregation, and dislocation-cutting number on the critical stress for the dislocation to overcome a row of precipitates are studied. A random stacking fault energy landscape along the slip plane, the lattice distortion at different temperatures, and the interface/surface energy at various crystallographic orientations are obtained. Compared with the traditional metals and alloys, HEAs have the severe atomic-scale lattice distortions to generate the local high tensile/compressive stress fields. This complex stress causes the dislocation line to bend, and thus improves the dislocation slip resistance, resulting in the strong solid-solution strengthening. The stacking fault strengthening induced by the obvious difference of the stacking fault energies between the HEA matrix and precipitate (within the inner of the HEA matrix), and the formation of the antiphase domain boundary contribute to the high strength. The precipitate embedded by the solute atoms produces the strong lattice distortion to enhance the dislocation slip resistance at high temperatures. Hence, the current results provide the mechanistic insight into the phenomenon that the coherent precipitate combined with the severe atomic-scale lattice distortion can enhance the strength at cryogenic/elevated temperatures to further broaden the scope of applications of advanced HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A stress-sensitive precipitate nucleation model beyond classical nucleation theory

The dynamic evolution of precipitates and second phases dictates the strength and stability of most engineering alloys. By design, or as a consequence of thermo-mechanical aging, engineering metals and alloys often form precipitates of second phases when subjecting to diverse thermal and mechanical loads. Precipitation is governed by several factors, including the alloy’s composition, processing/operating temperature, and stresses — either as a result of external loads or from residual stresses. However, state-of-the-art models for precipitate nucleation (i.e., classical nucleation theory) typically lacks consistent method to capture the effects of externally applied and/or internal stresses on nucleation; thereby severely limiting the applicability of these models to complex materials systems and to representative loading scenarios. Here, in this work, we extend upon classical nucleation theory to account for the effect of stresses on precipitation kinetics and thermodynamics. This is achieved via the use of an Eshelbian micromechanics framework keeping track of (i) the stress build up resulting from second phase formation as a function of mechanical load and, (ii) the effects of dislocations on precipitate formation. This new model is applied to σ precipitate in Fe–Cr binary alloys and M 23 C 6 precipitate in 316H stainless steel (SS). Simulations demonstrate the important role of both the remotely applied loads and dislocation pile ups on precipitate nucleation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiscale Simulation of Precipitation Over East Asia by Variable Resolution CAM-MPAS

This study evaluates the precipitation over East Asia simulated by the variable resolution CAM-MPAS featuring the Model for Prediction Across Scales (MPAS) atmospheric dynamical core coupled with the physics parameterizations of the Community Atmosphere Model (CAM) version 5.4. Two CAM-MPAS experiments, one with a global quasi-uniform resolution mesh of 120 km (MPAS-UR) and the other with a variable resolution mesh of 30 to 120 km refined over East Asia (MPAS-VR), are conducted from 1989 to 2005 following the Atmospheric Model Intercomparison Project protocol. Two regional climate model simulations at ~25 km resolution from the Coordinated Regional Downscaling Experiment East Asia second plan are also analyzed for comparison. Results show that CAM-MPAS performs better than the selected regional models in simulating the precipitation climatology over East Asia. Compared with MPAS-UR, MPAS-VR with refinement over East Asia better simulates the precipitation over and around the Tibetan Plateau (TP), the frequency distribution of light, moderate, and heavy precipitation in various regions of China, and the interannual precipitation pattern associated with the East Asian summer monsoon. The improvements in MPAS-VR relative to MPAS-UR largely come from the decreased grid spacing rather than the use of finer-scale terrain information. Particularly, decreased grid spacing is more essential for simulating the precipitation magnitude over TP and the location of peak precipitation south of TP, likely due to the better resolved physical and dynamical processes associated with orographic precipitation. The 30-120 km CAM-MPAS model is shown to be a promising tool for precipitation simulation over East Asia.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Changes in precipitation and air temperature contribute comparably to permafrost degradation in a warmer climate

Abstract Surface energy budgets of high-latitude permafrost systems are poorly represented in Earth system models (ESMs), yet permafrost is rapidly degrading and these dynamics are critical to future carbon-climate feedback predictions. A potentially important factor in permafrost degradation neglected so far by ESMs is heat transfer from precipitation, although increases in soil temperature and thaw depth have been observed following increases in precipitation. Using observations and a mechanistic ecosystem model, we show here that increases in precipitation hasten active layer development beyond that caused by surface air warming across the North Slope of Alaska (NSA) under recent and 21st century climate (RCP8.5). Modeled active layer depth (ALD) in simulations that allow precipitation heat transfer agreed very well with observations from 28 Circumpolar Active Layer Monitoring sites (R 2 = 0.63; RMSE = 10 cm). Simulations that ignored precipitation heat transfer resulted in lower spatially-averaged soil temperatures and a 39 cm shallower ALD by 2100 across the NSA. The results from our sensitivity analysis show that projected increases in 21st century precipitation deepen the active layer by enhancing precipitation heat transfer and ground thermal conductivity, suggesting that precipitation is as important an environmental control on permafrost degradation as surface air temperature. We conclude that ESMs that do not account for precipitation heat transfer likely underestimate ALD rates of change, and thus likely predict biased ecosystem responses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

An Extreme-Preserving Long-Term Gridded Daily Precipitation Data Set for the Conterminous United States

Extreme daily precipitation contributes to flooding that can cause significant economic damages, and so is important to properly capture in gridded meteorological data sets. This work examines precipitation extremes, the mean precipitation on wet days, and fraction of wet days in two widely used gridded data sets over the conterminous U.S. (CONUS). When compared to the underlying station observations, the gridded data show a 27% reduction in annual 1-day maximum precipitation, 25% increase in wet day fraction, 1.5 to 2.5 day increase in mean wet spell length, 30% low bias in 20-year return values of daily precipitation, and 25% decrease in mean precipitation on wet days. It is shown these changes arise primarily from the time-adjustment applied to put the precipitation gauge observations into a uniform time frame, with the gridding process playing a lesser role. A new daily precipitation data set is developed that omits the time-adjustment (as well as extending the gridded data by 7 years) and is shown to perform significantly better in reproducing extreme precipitation metrics. When the new data set is used to force a land surface model, annually averaged 1-day maximum runoff increases 38% compared to the original data, annual mean runoff increases 17%, evapotranspiration drops 2.3%, and fewer wet days leads to a 3.3% increase in estimated solar insolation. Consequently, these changes are large enough to affect portrayals of flood risk and water balance components important for ecological and climate-change applications across the CONUS.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1996

Were kinetics of Archean calcium carbonate precipitation related to oxygen concentration?

Archean carbonates commonly contain decimetre- to metre-thick beds consisting entirely of fibrous calcite and neomorphosed fibrous aragonite that precipitated in situ on the sea floor. The fact that such thick accumulations of precipitated carbonate are rare in younger marine carbonates suggests an important change in the modes of calcium carbonate precipitation through time. Kinetics of carbonate precipitation depend on the concentration of inhibitors to precipitation that reduce crystallization rates and crystal nuclei formation, leading to kinetic maintenance of supersaturated solutions. Inhibitors also affect carbonate textures by limiting micrite precipitation and promoting growth of older carbonate crystals on the sea floor. Fe2+, a strong calcite-precipitation inhibitor, is thought to have been present at relatively high concentrations in Archean seawater because oxygen concentrations were low. The rise in oxygen concentration at 2.2-1.9 Ga led to the removal of Fe2+ from seawater and resulted in a shift from Archean facies, which commonly include precipitated beds, to Proterozoic facies, which contain more micritic sediment and only rare precipitated beds.

Non-NASA Center↗
NASA NTRS2014

Observation-Corrected Precipitation Estimates in GEOS-5

Several GEOS-5 applications, including the GEOS-5 seasonal forecasting system and the MERRA-Land data product, rely on global precipitation data that have been corrected with satellite and or gauge-based precipitation observations. This document describes the methodology used to generate the corrected precipitation estimates and their use in GEOS-5 applications. The corrected precipitation estimates are derived by disaggregating publicly available, observationally based, global precipitation products from daily or pentad totals to hourly accumulations using background precipitation estimates from the GEOS-5 atmospheric data assimilation system. Depending on the specific combination of the observational precipitation product and the GEOS-5 background estimates, the observational product may also be downscaled in space. The resulting corrected precipitation data product is at the finer temporal and spatial resolution of the GEOS-5 background and matches the observed precipitation at the coarser scale of the observational product, separately for each day (or pentad) and each grid cell.

Data Assimilation↗
NASA NTRS2016

Supporting Hydrometeorological Research and Applications with Global Precipitation Measurement (GPM) Products and Services

Precipitation is an important dataset in hydrometeorological research and applications such as flood modeling, drought monitoring, etc. On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data. The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). GPM products currently available include the following:1. Level-1 GPM Microwave Imager (GMI) and partner radiometer products2. Goddard Profiling Algorithm (GPROF) GMI and partner products (Level-2 and Level-3)3. GPM dual-frequency precipitation radar and their combined products (Level-2 and Level-3)4. Integrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final run)GPM data can be accessed through a number of data services (e.g., Simple Subset Wizard, OPeNDAP, WMS, WCS, ftp, etc.). A newly released Unified User Interface or UUI is a single interface to provide users seamless access to data, information and services. For example, a search for precipitation products will not only return TRMM and GPM products, but also other global precipitation products such as MERRA (Modern Era Retrospective-Analysis for Research and Applications), GLDAS (Global Land Data Assimilation Systems), etc.New features and capabilities have been recently added in GIOVANNI to allow exploring and inter-comparing GPM IMERG (Integrated Multi-satelliE Retrievals for GPM) half-hourly and monthly precipitation products as well as other precipitation products such as TRMM, MERRA, NLDAS, GLDAS, etc. GIOVANNI is a web-based tool developed by the GES DISC, to visualize and analyze Earth science data without having to download data and software. During the GPM era, the GES DISC will continue to develop and provide data services for supporting applications. We will update and enhance existing TRMM applications (Current Conditions, the USDA Crop Explorer, etc.) with higher spatial resolution IMERG products. In this presentation, we will present GPM data products and services with examples.

GPM↗
NASA NTRS2018

Extratropical Cyclone Precipitation Life Cycles: A Satellite-Based Analysis

Although extratropical cyclones are the most common midlatitude storms, the relationship between their precipitation life cycle and dynamical strength life cycle has not been thoroughly analyzed. Given that thermodynamic heat exchanges associated with precipitation impact cyclone circulation, there is a need to understand the precipitation/dynamics relationship. Based on Integrated MultisatellitE Retrievals for Global Precipitation MeasurementGPM precipitation and Lagrangian cyclone tracks, the precipitation maximum occurs prior to the dynamical strength maximum 70% of the time. The lag in timing is consistent with the difference in cyclone precipitable water vapor at the two peaks. Conditional subsetting of the cyclone composites shows that if the precipitable water vapor distribution is constrained to be equal throughout the composite life cycle, the precipitation peak occurs very near the time of the peak in cyclone dynamical strength. Thus, the boost in dynamical strength caused by latent heat associated with precipitation manifest itself with little to no time lag.

Extratropical cyclone↗