Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Thermal conductivity of InN with point defects from first principles

We present ab initio calculations of thermal conductivity of InN with vacancies and substitutional defects using a full solution of the Peierls-Boltzmann transport equation. Our parameter-free calculations are in good agreement with experimental measurements demonstrating the predictive power of this approach. Phonon-defect scattering rates are computed from a Green's function methodology that is nonperturbative and includes interatomic force constant variance induced near the defects. Restricting calculations to first-order perturbation approaches can overestimate optic phonon scattering rates by nearly three orders of magnitude. On the other hand, neglecting the force variance weakens the scattering rates by about an order of magnitude, mostly in the low-frequency region below 2 THz. Here, this work elucidates important properties of phonon-defect scattering in thermal transport and demonstrates the predictive power of the coupling of Peierls-Boltzmann transport, Green's function methods, and density functional theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Fundamental Resolution of Difficulties in the Theory of Charged Point Defects in Semiconductors

A defect’s formation energy is a key theoretical quantity that allows the calculation of equilibrium defect concentrations in solids and aids in the identification of defects that control the properties of materials and device performance, efficiency, and reliability. The theory of formation energies is rigorous only for neutral defects, yet the Coulomb potentials of charged defects require additional ad hoc numerical procedures. In this report, we invoke statistical mechanics to derive a revised theory of charged-defect formation energies, which eliminates the need for ad hoc numerical procedures. Calculations become straightforward and transparent. We introduce calculations demonstrating the significance of the revised theory for defect formation energies and thermodynamic transition levels.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Oxygen point defect accumulation in single-phase U O 2 + x

UO 2.07 was characterized using neutron total scattering in order to elucidate defect morphology in the low oxygen-to-metal regime (x < 0.125 for UO 2+x ). Data were collected at temperatures (600 and 1000 °C) coinciding with the single-phase UO 2+x region of the established phase diagram, and results were compared with data of stoichiometric UO 2 collected at near-identical temperatures. Experimental data were modeled and interpreted using a holistic approach employing a combination of analyses that characterized multiple spatial length scales. Preferential modeling of long-range atomic arrangements with Rietveld refinement suggests the existence of primarily monointerstitials in UO 2.07 , whereas preferential modeling of short-range atomic structures with small-box pair distribution function (PDF) refinement indicates the presence of defect clusters in UO 2.07 . Simultaneous modeling of multiple length scales using complementary reverse Monte Carlo (RMC) and molecular dynamics (MD) methods confirms that excess oxygen atoms in UO 2.07 exist as small defects, such as monointerstitials and di-interstitials. RMC and MD results agree with diffraction analysis but differ significantly from small-box PDF refinements, which may be related to a lack of intermediate- and long-range structural information gained from the small-box PDF refinement procedure. Employing a combination of analysis methods with varying length-scale sensitivities enabled more accurate assessment of the UO 2+x defect structure. Furthermore, our findings provide experimental support for previously predicted di-interstitial defect morphologies in UO 2+x that highly influence the accurate prediction of bulk physiochemical properties of UO 2+x , such as oxygen diffusivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Point defects in CdTe and CdSeTe alloy: a first principles investigation with DFT+U

CdTe and its alloy CdSeTe are widely used in optoelectronic devices, such as radiation detectors and solar cells, due to their superior electrical properties. However, the formation of defects and defect complexes in these materials can significantly affect their performance. As a result, understanding the defect formation and recombination processes in CdTe and CdSeTe alloy is of great importance. In recent years, density functional theory (DFT) calculations have emerged as a powerful tool for investigating the properties of defects in semiconductors. In this paper, we use DFT+U calculations to comprehensively study the properties of intrinsic defects as well as extrinsic defects induced by commonly used dopants, such as Cu and group V elements, in CdTe and CdSeTe alloy. This work provides insights into the effects of these defects on the electrical and optical properties of the material.

14 SOLAR ENERGY↗
DOE OSTI2018

Impact of point defects on electrochromism in WO3

Using hybrid density functional theory, we investigate the influence on electronic structure of common defects and impurities in tungsten oxide (WO3). As an easily reducible perovskite with the A-site atom missing, high concentrations of foreign dopants and oxygen deficiencies are possible. Our calculations show that both oxygen vacancies and alkali dopants are shallow donors, and we explore the physical origins for this behavior. In particular, we examine whether oxygen vacancies can give rise to localized states or small polarons. Our results show that in crystalline material no such charge localization occurs. We discuss how these results impact electrical conductivity and optical properties.

Peelaers, Hartwin↗
DOE OSTI2019

Transformation of Radiation-Induced Molecular Point Defects and Color Centers in LiF Crystals under Influence of Light

The influences of UV light and integral light pulses from lamps on γ-irradiated LiF crystals with impurities of hydroxyl and magnesium ions have been investigated. The optical absorption and luminescence of color centers in different bleaching stages are studied depending on the crystal exposure time under UV light or on the number of light pulses. IR spectra of molecular hydrogen-bonded complexes and hydroxyl ions in different bleaching stages are presented. The transformation of strong hydrogen-bonded complexes under illumination into complexes with weak hydrogen bond (and vice versa) is studied. It is shown how molecular hydrogen-bonded complexes involving hydroxyl affect the transformation of color centers during the crystal bleaching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Differing behaviors of point defects in Fe–36Ni alloy during annealing after low-temperature deformation and irradiation

Fe–36Ni alloy is studied in states in which it is quenched, irradiated with electrons at 70 K, and deformed at 77 K. It is shown that similar structure-phase transformations occur in the investigated alloy during annealing at the temperature range of 70–570 K both after preliminary low-temperature electron irradiation and after preliminary low-temperature deformation. Migration of interstitial atoms (70–140 K) and vacancies (180–570 K), which induce phase transformations and are the results of atomic separation and ordering of zones with increased nickel content, is observed. Mechanisms of structure-phase changes under deformation and annealing are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Thermodynamic Modeling of Point Defects in Triple Conducting Perovskite Ba 0.95 La 0.05 FeO 3- $_δ$ with Incorporation of the Hydride Defect Formation Reaction for Solid Oxide Cells

Distinct from the proton defect, the hydride defect species may be present in certain perovskite materials in reducing environments such as in fuel electrodes of solid oxide cells (SOCs) or on the reducing side of ceramic membranes. A generalized defect thermodynamic model was developed for the triple-conducting perovskites (La,Ba)Fe 1-x M x O 3-δ (M = Y and Zr) to allow inclusion of the hydride defect formation reaction in addition to the other three main defect reactions, namely, the oxygen vacancy formation, hydration, and charge disproportionation reactions. This comprehensive defect model also allows the incorporation of polynomial functional forms of oxygen nonstoichiometry δ to describe the defect reaction energies and entropies and to enable refinements of the defect reaction equilibrium constants in the defect thermodynamic analysis. As a first step, the developed model is applied to the Ba 0.95 La 0.05 FeO 3-δ material as an illustrative system to obtain its Brouwer diagrams with both the proton and hydride defects in relevant SOC conditions, particularly for more reducing environments. In conclusion, the results provide direct guidance on the influence of electronic and ionic defect concentrations upon thermodynamic properties and ultimately on the performance of Ba 0.95 La 0.05 FeO 3-δ and potentially other (La,Ba)Fe 1-x M x O 3-δ perovskite materials involved in SOC applications.

25 ENERGY STORAGE↗
DOE OSTI2015

Review of Calculations on Point Defect Properties in Delta-Pu

The results of theoretical predictions of properties for vacancies and self-interstitial atoms (SIA) in δ-Pu are presented and reviewed. Three methods have been used for these predictions, namely the modified embedded atom method (MEAM), density functional theory (DFT) with and without spin polarization, and continuum mechanics (CM) models adapted to plutonium. The properties considered are formation and migration energies, and relaxation volumes of vacancies and SIA. Predicted values vary considerably. Nevertheless, all three methods predict that the activation energy for self-diffusion by vacancies is of similar magnitude as the SIA formation energy. Furthermore, the absolute magnitudes of relaxation volumes for vacancies and SIA are also similar, indicating that there exist no large bias for radiation-induced void swelling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

First-Principles Study of Tritium Trapping by Point Defects in Fe-Al Aluminide Coating Phases

Density functional theory simulations have been carried out to investigate the potential for tritium trapping by metal vacancies in five different Fe-Al aluminide coating phases. It was found that tritiation of Fe and Ni vacancies is generally less favorable than the tritiation of Al vacancies. However, for the first tritiation, a trend in the defect formation energy can be obtained such that metal defects in the Fe 2 Al x family of materials (i.e., Fe 2 Al 4 , Fe 2 Al 5 , and Fe 2 Al 6 ) trap tritium species more favorably than metal vacancies in Fe 4 Al 13 and FeNiAl 5 . Further investigations using ab initio thermodynamics calculations confirmed that trend for a range of tritium partial pressure at a temperature of 700 K. Especially, it was shown that the energy difference between tritiated and non-tritiated metal vacancies is smaller and more favorable for the Fe 2 Al x family, followed by Fe 4 Al 13 , and FeNiAl 5 . While this study shows that tritium interacts differently in the various Fe-Al aluminide phases, it also suggests that tritium trapping and retention could be more efficient if metal defects are present in some Fe-Al phases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tritium Trapping Thermodynamics by Point Defects at Interfacial Fe-Al Phases of the Aluminide Coating

Density functional theory (DFT) simulations have been carried out to evaluate the potential for tritium trapping by metal vacancies in four phases (i.e., (Fe, Cr, Ni), AlFe 3 , NiAl, and AlFe) identified near the interface between the Al coating and 316 stainless steel (316 SS) cladding. In addition, an ab initio thermodynamics approach has been employed to predict the temperature and T 2 -partial pressure dependence on the thermodynamics of tritiated defects. Key results in this work suggest that metal vacancies in the four phases have the potential to favorably trap tritium species. This thermodynamic trend can be correlated to the high energy cost of having an interstitial tritium in the lattice, which has been calculated to be at least 0.48 eV. By combining the results of this study with previous theoretical works investigating tritium behavior in other Fe-Al phases identified in the aluminide coating, suggest that metal vacancies are generally able to trap tritium in various Fe-Al aluminide phases. Especially, it was found that Al vacancies are the most efficient to trap tritium, followed by Fe vacancies, then Ni and Cr vacancies. Strong interactions between tritium and the metal vacancies are occurring by the formation of Fe—T bonds. The formation of Cr—T, Ni—T, or Al—T bonds are found less energetically favorable than Fe—T bonds.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗