Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plastic deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Modeling Pore Closure in the Hot Isostatic Pressing of Additively Manufactured Inconel 718 Samples

Additive manufacturing provides opportunity for a new world of possibilities for metallic component design and fabrication; however, as-built part quality is notoriously variable, anisotropic, and degraded by porous defects. To improve quality, parts are commonly post processed using a variety of techniques including hot isostatic pressing (HIP). During HIP, high temperature and pressure is employed to improve microstructure and reduce pore volume by inducing visco-plastic deformation in the metallic substrate. Validated computational capabilities can provide predictions to guide the selection of processing condition, expected pore reduction, and the effects of varying entrapped gas in the pores. This discussion describes a micro-scale finite element structural model developed to predict pore closure due to HIP in as-built additively manufactured Inconel 718 samples produced by the laser powder bed fusion process. The model accounts for plastic deformation, creep, and internal pressure for a single pore. Pores are characterized in physical samples before and after HIP, and model predictions are compared to this measured data.

defect model prediction↗
NASA NTRS2006

Properties of a Ni(sub 19.5)Pd(sub 30)Ti(sub 50.5) high-temperature shape memory alloy in tension and compression

Potential applications involving high-temperature shape memory alloys have been growing in recent years. Even in those cases where promising new alloys have been identified, the knowledge base for such materials contains gaps crucial to their maturation and implementation in actuator and other applications. We begin to address this issue by characterizing the mechanical behavior of a Ni19.5Pd30Ti50.5 high-temperature shape memory alloy in both uniaxial tension and compression at various temperatures. Differences in the isothermal uniaxial deformation behavior were most notable at test temperatures below the martensite finish temperature. The elastic modulus of the material was very dependent on strain level; therefore, dynamic Young#s Modulus was determined as a function of temperature by an impulse excitation technique. More importantly, the performance of a thermally activated actuator material is dependent on the work output of the alloy. Consequently, the strain-temperature response of the Ni19.5Pd30Ti50.5 alloy under various loads was determined in both tension and compression and the specific work output calculated and compared in both loading conditions. It was found that the transformation strain and thus, the specific work output were similar regardless of the loading condition. Also, in both tension and compression, the strain-temperature loops determined under constant load conditions did not close due to the fact that the transformation strain during cooling was always larger than the transformation strain during heating. This was apparently the result of permanent plastic deformation of the martensite phase with each cycle. Consequently, before this alloy can be used under cyclic actuation conditions, modification of the microstructure or composition would be required to increase the resistance of the alloy to plastic deformation by slip.

Noebe, Ronald↗
DOE OSTI2023

Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys

Creep mechanisms are studied in θ'-Al 2 Cu-strengthened Al-Cu-Mn-Zr alloys at 300 and 350°C for (i) ACMZ, a base alloy without further alloying elements and (ii) RR350, a commercial alloy with additions of Ni and Co forming distinct grain-boundary precipitates. At high stresses, creep is dominated by dislocations bypassing θ' precipitates within grains via the Orowan mechanism, as evidenced by (i) very high stress exponent (n~20-25) and (ii) α-Al and θ' lattice strains (measured via in-situ neutron diffraction) evolving during creep in a manner consistent with load transfer from the plastically-deforming α-Al matrix to elastically-deforming θ' precipitates. At intermediate stresses, both alloys exhibit a n~3 regime, where α-Al and θ' lattice strains scale near-linearly with applied stress while remaining largely unaffected by strain accumulation, indicating that Orowan looping or dislocation pile-up around θ' is now inactive within the grains. Rather, dislocation motion occurs solely in θ'-precipitate-free zones (θ'-PFZ) where high dislocation densities are observed via TEM after creep deformation. Plastic flow at θ'-PFZ and/or localized pipe diffusion are expected to enable grain-boundary sliding (GBS), which is proposed as the rate-limiting mechanism in the n~3 regime. Ni/Co-rich precipitates at RR350 grain-boundaries, with negligible θ'-PFZ around them, share load (as determined via neutron diffraction) with the α-Al matrix more effectively than θ-Al 2 Cu precipitates at ACMZ grain-boundaries, with wide surrounding θ'-PFZ. So, high creep resistance in the n~3 GBS regime of RR350 is enabled by coarsening-resistant grain-boundary precipitates, forming without concomitant development of weak θ'-PFZ, which effectively share load with the grains.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Discovery of multimechanisms of screw dislocation interaction in bcc iron from open-ended saddle point searches

Dislocation motion and interactions determine mechanical properties in body-centered cubic (bcc) metallic materials. However, studying mechanisms for the screw dislocation interaction is fundamentally challenging since many underlying processes involve mesotimescales and atomistic resolution, currently inaccessible by either experimental techniques or continuum theoretical methods. Here, in this paper, we develop a computational capability based on self-evolving atomistic kinetic Monte Carlo (SEAKMC) to sample the critical events and saddle point energies related to screw dislocations and their junctions. The method is first validated by calculating the stress dependence of Peierls barriers and formation energies of kink pairs and cross-slip kink pairs on a single screw dislocation in bcc iron. Then the method is applied to a binary junction of a pair of intersecting screw dislocations, the structure of which is crucial for low-temperature plastic deformation. We identify three important mechanisms: coplanar cross-slipping, jog-pinning, and a previously unknown unzipping mechanism during the evolution of the binary junction. The mechanisms are then further validated using classical molecular dynamics simulations. The computational capability developed in this paper provides an effective tool to evaluate screw dislocation related thermally activated events in complex stress conditions. The mechanisms discovered in this paper provide critical insights into temperature dependence of the anomalous slip, a breakdown of the Schmidt law, during the plastic deformation in bcc iron and can be generalized to other bcc metals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Pervasive symmetry-lowering nanoscale structural fluctuations in the cuprate La 2−𝑥 ⁢Sr 𝑥 ⁢Cu⁢O 4

The cuprate superconductors are among the most widely studied quantum materials, yet there remain fundamental open questions regarding their electronic properties and the role of structural degrees of freedom. Recent neutron and x-ray scattering measurements uncovered exponential scaling with temperature of the strength of orthorhombic fluctuations in the tetragonal phase of La 2−𝑥⁢ Sr 𝑥 ⁢Cu⁢O 4 and Tl 2 ⁢Ba 2 ⁢Cu⁢O 6+𝛿 , unusual behavior that closely resembles prior results for the emergence of superconducting fluctuations, and that points to a common origin rooted in inherent correlated structural inhomogeneity. Here, in this study, we use neutron and x-ray diffuse scattering to provide further insight into structural fluctuations in La 2−𝑥 ⁢Sr 𝑥 ⁢Cu⁢O 4 . We perform measurements up to temperatures that approach the melting point of the undoped parent compound, and we investigate the effects of in situ in-plane uniaxial elastic stress and plastic deformation. Our neutron scattering results for the parent compound La 2 ⁢Cu⁢O 4 reveal that short-range orthorhombic fluctuations persist to the maximum experimental temperature of nearly 1000 K, i.e., to a significant fraction of the crystallization temperature. At this temperature, the spatial characteristic length extracted from the momentum-space data is still about three lattice constants. The neutron scattering experiment enables quasistatic discrimination and reveals that the response is increasingly dynamic at higher temperatures. We also find that neither compressive elastic stress along the tetragonal [110] direction nor irreversible plastic deformation activating the ⟨100⟩⁢[001] slip system significantly alter the robust orthorhombic fluctuations. Overall, these results support the notion that these fluctuations couple to subtle, underlying inhomogeneity that underpins the cuprate phase diagram. Finally, in La 1.8⁢ Sr 0.2⁢ Cu⁢O 4 , we uncover low-energy structural fluctuations at a nominally forbidden reflection that are distinct from the orthorhombic distortions. While the origin of these fluctuations is not clear, they might be related to the presence of extended defects such as dislocations or stacking faults.

Spieker, R. J. [Univ. of Minnesota, Minneapolis, M↗
NASA NTRS1945

Micromechanical Study of Metals

The Institut Scientifique Experimental des Transports at Moscow established toward the end of 1925 had since its inception included in its program the study of the mechanism of plastic deformation and the problems associated with it with reference to the materials of the means of transport. Before the program thus determined upon could be carried out, it was necessary to adopt a method of research, or, more exactly, a system of such methods. Because of the modest equipment of the laboratory of the recently established institute, the choice of any particular method was determined not only by the advantages it offered but also by the resources available. As a result of a series of studies and investigations, a method was determined upon which in this paper will be denoted as the micromechanical method. The underlying basis of this method is already known. As will be seen from the description that follows, the micromechanical method is merely a combination of the micrographic study of plastic deformations with mechanical tests on small specimens. It is a well-known fact that a number of investigators have largely employed and still are employing these two procedures and have thereby obtained good results. The authors of the present paper have found it useful to combine the two methods, by making the two studies simultaneously on the sane specimen.

Velikov, P. A.↗
DOE OSTI2020

Microstructure, hardness and cavitation erosion resistance of different cold spray coatings on stainless steel 316 for hydropower applications

There is an urgent need for repair of hydropower components that have undergone damage due to cavitation. Conventional repair methods involve melting of materials and can deteriorate material properties and cause distortion. This study investigated the relevant properties of different materials using solid phase processing—cold spray technology. Stainless steel (SS) 316, Inconel 625 and CrC-NiCr materials were cold spray deposited onto base metal SS 316, respectively. Cold spray achieved dense uniform deposits with low level porosity, and intimate contact between the deposit and the base metal was observed. Severe plastic deformation imparted during the cold spray process resulted in significant grain size refinement, nanostructured regions were observed in the deposits across the interfacial area. Cold sprayed deposits exhibited elevated hardness in contrast to that of the base metal SS 316. The cavitation erosion resistance of the deposits was evaluated with a cavitation erosion jet adhering to ASTM G134. Both SS 316 and Inconel 625 achieved better cavitation erosion resistance when compared to that of the SS 316 base metal, with the former exhibiting close to a 4 times improvement.

Jiang, Xiujuan↗
DOE OSTI2025

Methods to Observe Tribological Failures in Self-Mated Steel Contacts

Scuffing, a type of wear found in highly stressed or poorly lubricated contacts, is characterized by a rapid increase in friction and severe plastic deformation of the near-surface material. Scuffing has proven difficult to study because it initiates unpredictably, progresses rapidly, and typically develops within an inaccessible contact interface. Although there have been successful in-situ studies of scuffing in real-time, the transparent counter body needed for these studies changes the interactions between the surfaces and the lubricant, which affects the scuffing process in unknown ways. This paper describes the development of X-ray-compatible tribometry to study the scuffing of self-mated steels in-situ and in real-time. The method uses a crossed cylinders configuration with a thin (500 μm thick) stationary component and a small (≈200 μm) contact width to maximize X-ray interactions with atoms within the stress field generated by the contact. The resulting instrument and method are used to benchmark the scuffing response of self-mated 52,100 steel under tribologically challenging ‘oil-off’ lubrication conditions. The results demonstrate reliable scuffing in this configuration despite the relatively small contact areas and loads used. Following scuffing, gross plastic deformation was observed on both surfaces along with significant subsurface grain refinement and flow only on the stationary surface, which experienced constant contact. Interestingly, high friction initiated at specific locations of the migratory surface, which experienced intermittent contact, and then propagated across the track over time, suggesting that local conditions of the migratory surface dominated friction leading into the failure event.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Physics-informed neural networks for identification of material properties using standing waves

A metallic structure in its initial stage of failure involves plastic deformation or environmental degradation that changes the elastic modulus and density. This work presents the detection of change in wave velocity (a function of elastic modulus and density) as a system identification problem. A physics-informed neural network (PINN) is proposed to solve the system identification problem. The PINN takes the spatial coordinates of scanning locations and time as inputs and provides the displacement and wave velocity as outputs. The governing partial differential equation of standing waves in a rod is incorporated into the neural network as physics in the form of a loss function. The wave velocity vector is randomly initiated. During the training of the network, physics is used to determine and update the wave velocity target vector from the network’s displacement predictions. The measured data, comprising sparse displacement response on the rod structure, are used to train the PINN. The wave velocity at the sparse locations on the rod is learned from the predicted displacements during the training. Using the predictions of the trained network, the response of free vibration or material property variation can be reconstructed at unscanned locations on the structure to obtain high-resolution maps for full-field imaging to detect and localize the changes caused by plastic deformation. The PINN’s sparse scanning and simultaneous prediction capability during training can lead to high scanning and data-processing speeds. This capability yields a nondestructive evaluation system that can predict the presence of degraded material locations as the structural vibrations are scanned and processed in real time.

Rathod, Vivek↗
DOE OSTI2023

Microscale drivers and mechanisms of fracture in post-processed additively manufactured Ti–6Al– 4 V

Herein, we focus on understanding the microstructure-fracture correlations in a Ti–6Al– 4 V alloy additively manufactured via electron beam melting (EBM) and subjected to various post-process heat-treatments. Specifically, the as fabricated material is subjected to a sub-transus heat-treatment followed by air-cooling and a super-transus heat-treatment followed by either air- or furnace-cooling. Next, a series of in-situ single edge notch tension (SENT) tests are carried out under a high-resolution digital optical microscope. The panoramic high-resolution images captured during the in-situ tests are then used to characterize the planar deformation on the specimen surface using microstructure-based digital image correlation (DIC). Additionally, the results of the in-situ SENT tests together with DIC and post-mortem fractographic analyses provided us with a better understanding of the microstructure-fracture correlations in these materials. Our results show that the fracture mechanism of the as fabricated and sub-transus heat-treated materials is essentially the same, while the changes in the microstructure following the super-transus heat-treatments significantly affects the fracture mechanism. In this case, several microcracks of hundreds of microns in length first nucleate away from the deformed notch following extreme plastic deformation at discrete locations. Furthermore, the location of these microcracks in the super-transus heat-treated materials is extremely sensitive to the details of the underlying microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Virtual texture analysis to understand microstructure effects on deformation twinning and detwinning behavior in BCC metals

Understanding and predicting deformation twinning contributions to plastic deformation in BCC metals has been a long-standing challenge due to the interplay with dislocation slip and non-Schmid effects that render an asymmetry under tension and compression. This paper uses molecular dynamics simulations to understand the effect of unloading and grain orientation on deformation twinning in a nanocrystalline Fe (nc-Fe) system as a model BCC metal. The nc-Fe system is loaded under uniaxial stress tension and compression to understand the effect of grain orientation (Schmid effects) on deformation twinning behavior and the tension/compression asymmetry (non-Schmid effects). A new virtual texture analysis “VirTex” tool is used to understand the role of grain orientation on the nucleation of twins and their contributions to the observed stress–strain response. For certain grain orientations, the twinnability is observed to be different in tension and compression. In addition, the flow stress accommodation from twins in certain grains is observed to be different in tension and compression and different from that for the grains. Subsequent unloading leads to detwinning in the deformed microstructures, where the extent of detwinning depends on the strain from which the system is unloaded and on the morphology of the twin. Lastly, the simulations are carried out to analyze the role of the Schmid factor on the twinnability and asymmetry in tension and compression.

Kannan, Aadhithyan [University of Connecticut, Sto↗
DOE OSTI2020

High-Energy X-Ray Diffraction Microscopy in Materials Science

High-energy diffraction microscopy (HEDM) is an implementation of three-dimensional X-ray diffraction microscopy. HEDM yields maps of internal crystal orientation fields, strain states, grain shapes and locations as well as intragranular orientation distributions, and grain boundary character. Because it is nondestructive in hard materials, notably metals and ceramics, HEDM has been used to study responses of these materials to external fields including high temperature and mechanical loading. Currently available sources and detectors lead to a spatial resolution of ~1 μm and an orientation resolution of <0.1°. With the penetration characteristic of high energies ( E ≥ 50 keV), sample cross-section dimensions of ~1 mm can be studied in materials containing elements across much of the Periodic Table. This review describes hardware and software associated with HEDM as well as examples of applications. Overall, these applications include studies of grain growth, recrystallization, texture development, orientation gradients, deformation twinning, annealing twinning, plastic deformation, and additive manufacturing. We also describe relationships to other X-ray-based methods as well as prospects for further development.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Constraint and size effects in confined layer plasticity

Plane strain finite element analyses are used to model the experiments for a thin metal layer confined between elastic solids. Here, the thin metal layer undergoes elastic-plastic deformations, here modelled by strain gradient plasticity, while the rest of the solid deforms only elastically. Plane strain is assumed and finite strains are accounted for. The microscopic boundary condition at the band interface is initially taken to be zero plastic strain increment, but plastic straining at the interface is allowed when the plastic strain gradient at the interface has exceeded a critical value. When the narrow metal band is inclined 45° relative to the direction of compression of the solid simple shear develops in the band and predictions are rather similar to those of a one-dimensional analysis for an infinite band. For a band at 90° the elastic parts give significant constraint on plastic flow, the stress fields are non-uniform along the band and the average nominal compressive stress shows strong sensitivity to the layer thickness and to the width of the specimen. Remarkably good qualitative, and in some cases quantitative, agreement is found with the experimental observations. Considering also other band angles, both the average nominal shear and compressive stress show variations with the angle.

36 MATERIALS SCIENCE↗
NASA NTRS1965

Analysis of peeling

Elastic stresses in adhesives and plastic deformation in metal strips during peeling

PLASTIC DEFORMATION↗