Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phosphate process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comparison of microprecipitation methods for polonium source preparation for alpha spectrometry

Detection of radioactive isotopes of polonium is important for understanding natural processes, management and assessment of radioactive waste, and nuclear forensics applications. Further, the most common methods for preparation of polonium samples for alpha spectrometry are electrodeposition and spontaneous deposition which are time consuming. Here, we compare three approaches utilizing rapid microprecipitation from bismuth phosphate, copper sulfide, or tellurium alongside traditional spontaneous deposition methods. From these experiments, results show that copper sulfide microprecipitation recoveries are similar to spontaneous deposition on silver and less time consuming with an approximate five-fold decrease in preparation time, including in the presence of complex matrices like seawater.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1977

The relationship between lunar metal particles and phosphate minerals

Phosphorus is often present in lunar rocks and soils in bulk concentrations in excess of 0.5 wt % P205. The minerals apatite and whitlockite account for most of the phosphorus. However, it may also be present in metal grains. The relations between metal particles and the phosphates commonly found adjacent to these particles are investigated, taking into account studies involving three Apollo 17 rocks. It appears that phosphorus in lunar metal particles is related to the phosphate minerals by a redox reaction. The independent phosphates probably formed over much of the cooling period of the rock. While the rock was at high temperature, however, phosphorus was free to diffuse and dissolve in the metal droplets providing conditions were sufficiently reducing. If the rock was partially molten, this process would take less than 1 hr. If cooling occurred slowly under less reducing conditions, some of the phosphorus in the metal particles would be oxidized to form whitlockite.

Friel, J. J.↗
DOE OSTI2022

Impact of f-element complexation on the radiolytic robustness of separations ligands

Impact of f-element complexation on the radiolytic robustness of separations ligands Gregory P. Horne, Makayla R. Baxter, Corey D. Pilgrim, Travis S. Grimes, Center for Radiation Chemistry Research, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID, 83415, USA Cristian Celis Barros, Department of Chemistry and Biochemistry, Florida State University, Tallahassee, FL 32306, USA. E-mail: ccelisbarros@fsu.edu Andrew R. Cook, Department of Chemistry, Brookhaven National Laboratory, Upton, New York, 11973, USA Stephen P. Mezyk, Department of Chemistry and Biochemistry, California State University Long Beach, 1250 Bellflower Boulevard, Long Beach, California, 90840-9507, USA The effects of ionizing radiation are ubiquitous throughout all aspects of a nuclear fuel cycle. However, the complexity and intensity of these effects are greatest during the management of used nuclear fuel, owing to the presence of a wide spectrum of radionuclides from neutron capture and fission processes. With regards to used nuclear fuel (UNF) reprocessing, radiation-induced processes typically promote the destruction of active compounds (e.g., complexants and additives) with the concomitant formation of potentially detrimental degradation products and corresponding changes in physical and chemical properties, which ultimately impact the effectiveness and longevity of a given reprocessing system. Concerning UNF complexants, radiation chemistry studies have historically focused on their radiation robustness in the absence of the metal ions they were designed to selectively complex. This knowledge gap is worrisome as previous studies on aqueous phase complexants have demonstrated significant changes in radiolytic behavior upon metal ion complexation.1-4 More recently, the rate of reaction of the n-dodecane radical cation—believed to be the major organic phase radiation-induced transient species responsible for complexant radiolysis in n-dodecane based solvent systems—with hexa-n-octylnitrilo-triacetamide (HONTA) was shown to increase by an order-of-magnitude upon complexation of europium or americium.5 These findings have significant implications on the projected longevity of complexants in UNF reprocessing solvent systems. Consequently, a thorough understanding of metal ion complexation effects on the radiolytic integrity of UNF complexants is essential to evaluate their potential for process application. Presented here are two recent studies from the Idaho National Laboratory Center for Radiation Chemistry Research group that demonstrate the various impacts of f-element complexation (uranium, americium, and lanthanides) on the radiolytic integrity (gamma and electron pulse) of tributyl phosphate (TBP), N,N-di-(2-ethylhexyl)butyramide (DEHBA), N,N-di-2-ethylhexylisobutryamide (DEHiBA), and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) under UNF reprocessing conditions. References 1) Bhattacharyya and Kundu, Int. J. Radiat. Phys. Chem., 1971, 3, 1. 2) Kundu and Matuura, Int. J. Radiat. Phys. Chem., 1975, 7, 565. 3) Ilan and Czapski, Biochimica et Biophysica Acta, 1977, 498, 386. 4) Buettner, Doherty, and Patterson, Fed. Euro. Biochem. Soc., 1983, 158 (1), 143. 5) Toigawa, Peterman, Meeker, Grimes, Zalupski, Mezyk, Cook, Yamashita, Kumagai, Matsumura, Horne, PCCP, 2021, 23, 1343.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Evaluating the contribution of plant metabolic pathways in the light to the ATP:NADPH demand using a meta-analysis of isotopically non-stationary metabolic flux analyses

Abstract Balancing the ATP: NADPH demand from plant metabolism with supply from photosynthesis is essential for preventing photodamage and operating efficiently, so understanding its drivers is important for integrating metabolism with the light reactions of photosynthesis and for bioengineering efforts that may radically change this demand. It is often assumed that the C3 cycle and photorespiration consume the largest amount of ATP and reductant in illuminated leaves and as a result mostly determine the ATP: NADPH demand. However, the quantitative extent to which other energy consuming metabolic processes contribute in large ways to overall ATP: NADPH demand remains unknown. Here, we used the metabolic flux networks of numerous recently published isotopically non-stationary metabolic flux analyses (INST-MFA) to evaluate flux through the C3 cycle, photorespiration, the oxidative pentose phosphate pathway, the tricarboxylic acid cycle, and starch/sucrose synthesis and characterize broad trends in the demand of energy across different pathways and compartments as well as in the overall ATP:NADPH demand. These data sets include a variety of species including Arabidopsis thaliana , Nicotiana tabacum , and Camelina sativa as well as varying environmental factors including high/low light, day length, and photorespiratory levels. Examining these datasets in aggregate reveals that ultimately the bulk of the energy flux occurred in the C3 cycle and photorespiration, however, the energy demand from these pathways did not determine the ATP: NADPH demand alone. Instead, a notable contribution was revealed from starch and sucrose synthesis which might counterbalance photorespiratory demand and result in fewer adjustments in mechanisms which balance the ATP deficit.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Electron Redistributed S-Doped Nickel Iron Phosphides Derived from One-Step Phosphatization of MOFs for Significantly Boosting Electrochemical Water Splitting

Nonprecious transition metal-organic frameworks (MOFs) are one of the most promising precursors for developing electrocatalysts with high porosity and structural rigidity. This study reports the synthesis of high efficiency electrocatalysts based on S-doped NiFeP. MOF-derived S-doped NiFeP structure is synthesized by a one-step phosphorization process with using S-doped MOFs as the precursor, which is more convenient and environment friendly, and also helps retain the samples’ framework. The oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance of the NiFeP catalysts can be improved after partially replacing P by S due to the tunable electronic structure. The optimized CCS-NiFeP-10 reaches a current density of 10 mA cm –2 for OER with an overpotential of 201 mV and outperforms most NiFe-based catalysts. The S doping plays an important role in tuning the ΔG values for intermediates formation in Ni atoms to a suitable value and exhibits a pronouncedly improved the OER performance. CCS-NiFeP-20 sample presents excellent HER performance due to the d-band center downshifting from the Fermi level. When the voltage of the electrolytic cell is 1.50 V, a current density of 10 mA cm –2 can be obtained. This strategy paves the way for designing highly active none-noble metal catalysts.

36 MATERIALS SCIENCE↗
NASA NTRS2018

Freeze Casting of LAGP for 3D Textured Solid-State Structural Electrolytes

In this study, all-solid-state structural lithium-ion batteries, a type of load bearing electrochemical energy storage that provides systems-level weight savings is being pursued for the realization of inherently safe next generation hybrid-electric and all-electric green aerospace propulsion systems. Currently investigated all-solid-state batteries do not meet the requirements for specific power and mechanical stability. To address these issues, freeze casting of lithium aluminum germanium phosphate (LAGP) electrolyte material has been explored for the creation of a textured 3D electrolyte scaffold with large interfacial surface area for high power discharge and hierarchical porosity for accommodation of active material volume changes during electrochemical cycling. We report the effects of freeze casting processing parameters on the microstructural development and mechanical performance of the scaffolds, characterized through scanning electron microscopy and ring-on-ring mechanical testing. Slurry composition and casting parameters such as solids loading, casting speed, tape angle, and temperature gradients have been modified to determine the impact on density, lamellar morphology, and final load-bearing performance.

ceramics↗
DOE OSTI2020

Scalable, two–stage, autoinduction of recombinant protein expression in E. coli utilizing phosphate depletion

We report the scalable production of recombinant proteins in Escherichia coli, reliant on tightly controlled autoinduction, triggered by phosphate depletion in the stationary phase. The method, reliant on engineered strains and plasmids, enables improved protein expression across scales. Expression levels using this approach have reached as high as 55% of the total cellular protein. The initial use of the method in instrumented fed–batch fermentations enables cell densities of ~30 gCDW/L and protein titers up to 8.1 ± 0.7 g/L (~270 mg/gCDW). The process has also been adapted to an optimized autoinduction media, enabling routine batch production at culture volumes of 20 μl (384–well plates), 100 μl (96–well plates), 20 ml, and 100 ml. In batch cultures, cell densities routinely reach ~5–7 gCDW/L, offering protein titers above 2 g/L. Here, the methodology has been validated with a set of diverse heterologous proteins and is of general use for the facile optimization of routine protein expression from high throughput screens to fed–batch fermentation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Solvent effects on extractant conformational energetics in liquid–liquid extraction: a simulation study of molecular solvents and ionic liquids

Extractant design in liquid–liquid extraction (LLE) is a research frontier of metal ion separations that typically focuses on the direct extractant–metal interactions. However, a more detailed understanding of energetic drivers of separations beyond primary metal coordination is often lacking, including the role of solvent in the extractant phase. In this work, we propose a new mechanism for enhancing metal-complexant energetics with nanostructured solvents. Using molecular dynamics simulations with umbrella sampling, we find that the organic solvent can reshape the energetics of the extractant's intramolecular conformational landscape. Here, we calculate free energy profiles of different conformations of a representative bidentate extractant, n-octyl(phenyl)-N,N-diisobutyl carbamoyl methyl phosphinoxide (CMPO), in four different solvents: dodecane, tributyl phosphate (TBP), and dry and wet ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf 2 N]). By promoting reorganization of the extractant molecule into its binding conformation, our findings reveal how particular solvents can ameliorate this unfavorable step of the metal separation process. In particular, the charge alternating nanodomains formed in ILs substantially reduce the free energy penalty associated with extractant reorganization. Importantly, using alchemical free energy calculations, we find that this stabilization persists even when we explicitly include the extracted cation. These findings provide insight into the energetic drivers of metal ion separations and potentially suggest a new approach to designing effective separations using a molecular-level understanding of solvent effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Biomining Critical Elements and Metals

The US government has identified 17 critical elements, including most rare earth elements (REEs), and metals, which are used extensively in consumer electronics as well as military and national security hardware. We are developing techniques for biomining these elements, the process of using microorganisms to extract critical elements from water, ores, and mine waste to fill these needs. Bioextraction is focusing on: 1) building on our first-year successes of identifying microbes that generate exudates that enhance the extraction of multivalent cations, 2) evaluating available phosphate solubilizing microbes to dissolve apatite and monazite, and 3) and biosurfactant producing microbes. Bioaccumulation efforts involves testing microbes that: 1) naturally release complex exudates that contain organic chelating agents, and 2) naturally accumulate or hyperaccumulate (wt-% levels) metals. Results from year one includes proof of concept that biosurfactant producing microorganisms can release REEs from select ores and that release of REEs is increased by the addition of glucose. Molecular results for microorganism profiling proved a population shift after addition of microorganisms. The study will culminate in a proof-of-concept demonstration, manuscripts, and the data needed for scaledup biomining of REEs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Controlled-Environment Agriculture and the Geography of Food, Energy and Water Resilience in the United States

USDA guidelines call for an increase in fruit and vegetable consumption in U.S. households to promote healthier diets. Access to fresh fruits and vegetables are especially lacking in food deserts and food swamps (characterized by a prevalence of food that is highly processed and lacking in nutritional value). Adoption of the recommended healthy diet, which more than doubles the consumption of fruits and vegetables, would have a wide variety of health benefits and would reduce the land footprint of U.S diets. However, adopting a healthy diet would increase phosphate and nitrogen impacts associated with fertilizers and pesticides and would significantly increase freshwater consumption and energy use because of the resource intensity of field cultivation of fruits and vegetables. The majority of these crops are grown in just a few states, including California and Arizona, which are increasingly impacted by climate change. In addition, rural communities are rapidly becoming food deserts, while food produced in these areas is transported long distances to market. In recent years, highly intensified controlled environment (CE) agricultural systems, (i.e., vertical farming) have been developed to provide fresh food closer to consumers. Fruits and vegetables, many of which are amenable to CE culture, occupy a uniquely impactful segment of the food supply-chain, including their value in improving nutrition for vulnerable communities. The objective of this work is to elucidate the location dependency of the energy and water impacts of adoption of distributed CE farming for an important portion of the food system.

controlled environment agriculture↗
DOE OSTI2025

In Situ Synthesis of Phosphate-Based CelloMOF as a Promising Separator for Li–Ion Batteries

Nowadays, battery separators play a critical role in determining the sustainability, electrochemical efficiency, and safety of lithium-ion batteries (LIBs). In this contribution, we developed fire-resistant composite membranes called CelloMOF by in situ grafting of metal-organic framework, ZIF-67, onto phosphorylated cellulose nanofibers (P-CNFs) followed by a vacuum filtration process akin to papermaking. The hybrid ZIF-67@P-CNF membrane exhibits superior properties than a polyolefin-based commercial separator (CS) in terms of enhanced thermal and dimensional stability, flame-retardant properties, better surface wettability, and improved electrolyte uptake. Thermal dimensional stability tests revealed that the ZIF-67@P-CNF separator maintained its structure even at 200 °C, whereas CS suffered severe shrinkage, potentially leading to internal short circuits. Combustion tests showed a peak heat release rate (PHRR) of 34.5 W/g and a total heat release (THR) of 1.61 kJ/g for ZIF-67@P-CNF, significantly lower than the PHRR (1111.82 W/g) and THR (40.89 kJ/g) of CS. The composite separator also demonstrated significantly improved wettability, with a contact angle of 32 ± 1.04°, compared to 92 ± 1.07° for CS, highlighting its hydrophilic nature. Electrochemical evaluations in LiFePO 4 /Li half-cells indicated a higher discharge capacity of 149 mA h g -1 at 0.2 C and superior capacity retention of 86% after 50 cycles, outperforming CS (145 mA h g -1 and 84%, respectively). In conclusion, these results underscore the potential of the ZIF-67@P-CNF membrane to advance safe, high-performance LIBs by addressing critical challenges in thermal stability, flame retardancy, and electrolyte compatibility.

ZIF-67↗
DOE OSTI2025

A Unique Case of the “Goldilocks Rule” in Solid-State Electrolytes: Two Are Good, Four Are Too Many

We report the syntheses of two new series of methacrylate monomers with different backbones: ureidopyrimidinone (PU) and boron-substituted urea pyrimidine (U), which enhance both the mechanical and electrochemical properties of the solid-state electrolyte (SSE) while improving the cycle life of lithium iron phosphate (LiFePO 4 , LFP) cathodes. The PU backbone is characterized by four hydrogen bonds (H-bonds), while the U backbone bears only two. Importantly, our research reveals that two H-bonds in these monomers are optimal; in contrast, four are excessive. The exceptional mechanical properties and processability of the SSE with the U series additives, resulting from the optimal H-bonds, were unexpectedly achieved. This leads to the establishment of a “Goldilocks rule” for additive design. The key strategies include: 1) reducing hydrogen-bonding (H-bonding) sites by changing pyrimidinone to pyrimidine and 2) shifting from intermolecular to intramolecular H-bonding and π−π bonding. Furthermore, this reduction in H-bonding also offers significant advantages in processability. The advancement can be extended to electrode fabrication, making the manufacturing of all-solid-state batteries more practical and efficient.

hydrogen bonding↗
DOE OSTI2022

Revealing a Hidden Intermediate of Rotatory Catalysis with X-ray Crystallography and Molecular Simulations

The mechanism of rotatory catalysis in ATPhydrolyzing molecular motors remains an unresolved puzzle in biological energy transfer. Notwithstanding the wealth of available biochemical and structural information inferred from years of experiments, knowledge on how the coupling between the chemical and mechanical steps within motors enforces directional rotatory movements remains fragmentary. Even more contentious is to pinpoint the rate-limiting step of a multistep rotation process. Here, using vacuolar or V 1 -type hexameric ATPase as an exemplary rotational motor, we present a model of the complete 4-step conformational cycle involved in rotatory catalysis. First, using Xray crystallography, a new intermediate or “dwell” is identified, which enables the release of an inorganic phosphate (or P i ) after ATP hydrolysis. Using molecular dynamics simulations, this new dwell is placed in a sequence with three other crystal structures to derive a putative cyclic rotation path. Free-energy simulations are employed to estimate the rate of the hexameric protein transformations and delineate allosteric effects that allow new reactant ATP entry only after hydrolysis product exit. An analysis of transfer entropy brings to light how the side-chain-level interactions transcend into larger-scale reorganizations, highlighting the role of the ubiquitous arginine-finger residues in coupling chemical and mechanical information. An inspection of all known rates encompassing the 4-step rotation mechanism implicates the overcoming of the ADP interactions with V 1 -ATPase to be the rate-limiting step of motor action.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Glass-Bonded Monazite Waste Forms for Lanthanide and Actinide Immobilization: From Theoretical Design to Scale-Up Production and Characterization

The development of nuclear waste forms for both existing and future nuclear wastes is critical to ensuring global environmental safety. This study focuses on waste management from molten salt reactors, where fuel exists in a salt form and could be processed in real time for the removal of neutron poisons such as xenon isotopes (e.g., 135 Xe) and rare earth elements (REEs, e.g., 149 Sm). To ensure safe, stable, and long-term disposal in geological repositories, REEs must be incorporated into a durable waste form. Iron-phosphate glasses are a promising candidate due to their low melting points, high chemical durability, and their ability to incorporate high concentrations of REEs. In this study, we successfully prepared iron-phosphate glass waste forms with high Nd loadings (up to 37 mass %) in batch sizes ranging from small (23 g) to large (1600 g). The resulting materials contained up to 75 mass % NdPO 4 , contributing to their mechanical resilience and exceptional chemical durability. These findings highlight the potential of iron-phosphate glasses as high-efficiency, chemically durable waste forms and demonstrate the successful transition from theoretical design to scaled-up production.

amorphous materials↗
NASA NTRSDate not supplied

Does Collection Time Bias the Ecology of Cleanroom Air Samples?

Microbial monitoring of astromaterials collections has taken on increased importance with the return of biologically sensitive samples from the asteroids Ryugu and Bennu and the initiation of the Mars Sample Return Program. Terrestrial bacteria and fungi can alter the mineralogy and organic composition of our collections causing irreversible contamination of pristine samples and increasing the risk of false positives for life detection measurements. NASA has conducted routine microbial monitoring of its existing collections since 20181. Initial monitoring focused on surface samples collected with foam swabs. Although, airborne microbiology is often decoupled from surface microbiology in the built environment2 culture-based air sampling techniques like impactors were not compliant with existing contamination control requirements. Bringing organic rich media, gelatin or liquids into curation cleanrooms presents an unacceptable risk to pristine samples. In 2022 NASA purchased a materials complaint air sampler and began collecting air samples from the cleanrooms in addition to surface samples3. The new instrument uses an electret filter to collect samples that are suitable for cultivating organisms or for direct DNA sequencing. Preliminary DNA sequencing results appeared to indicate that longer sampling times biased the microbial community in favor of hearty, spore-forming bacteria3. We present the results of a study comparing overnight sampling (17 hours) to short (1 hour) sampling of unoccupied curation cleanrooms. The results will help us optimize our monitoring protocols and develop a more detailed inventory of the ecology of astromaterials curation cleanrooms. Methods: We analyzed 72 paired air samples from six different cleanrooms including the meteorite processing lab (ISO 7 equivalent, 16 samples), the lunar lab (ISO 6 equivalent, 10 samples), the stardust lab (ISO 5 equivalent 14 samples), the OSIRIS-REx lab (ISO 5 equivalent, 12 samples), the Hayabusa2 lab (ISO 5 equivalent, 14 samples), and the Genesis lab (ISO 4 equivalent, 6 samples). All the samples were collected with an InnovaPrep Bobcat air sampler operating at a sampling rate of 200 L/min. The sampler operates for 5 minutes out of every 20 minute period. Half of the samples were collected by filtering 3,000L (15 min. of active sampling) of air across an electret filter for one hour. The rest of the samples were collected by filtering approximately 51,000 L air across the filter overnight (~17 hours, 255 min. of active sampling). Cells were eluted from the filter using 6-7 ml of pressurized 0.15% tween 20 in PBS (phosphate buffered saline). This liquid was used to cultivate bacteria according to previously published methods1,4,5 and for DNA extraction and next generation sequencing. DNA was extracted with a Qiagen MagAttract PowerMicrobiome kit6. To identify bacteria and archaea, the 16S rRNA gene was amplified using Earth Microbiome primers for the V4 region 7. The amplified DNA was sequenced on an Illumina MiSeq using a V3 reagent kit. The resulting sequences were processed using DADA2 and QIIME2 as implemented on the EDGE bioinformatics platform8–10. Results: Only two of the 72 samples had no amplifiable DNA. Amplified DNA concentrations ranged from 2.67 – 0.272 ng/µl. The median concentration of amplified DNA for the 1 hour samples was 0.770 ± 0.368 ng/µl. The median concentration of amplified DNA for the overnight samples was 0.877 ± 0.434 ng/µl. On average the overnight samples had slightly more sequences (58,960 vs. 59,456) and ASV’s (amplicon sequence variants) (60 vs 64.5) than the one hour samples, but these differences are not statistically significant. The most abundant ASV in every sample mapped to the genus Cupravidus. ASV’s mapping to the genuses Bacillus, Schlegelella, Thermus, and Staphylococcus were also common. Discussion and Future Work: Alpha diversity statistics like Shannon Entropy and Faith Phylogenetic Diversity are used to describe the diversity of organisms in a single sample. If a longer sampling time was biasing the data, we would expect to see a change in these diversity statistics vs. sample time. However, we did not observe this in our data. The median Shannon entropy was slightly higher for the overnight samples (3.773 vs 3.611) as was the Faith Phylogenetic Diversity (4.042 vs 3.596), but both values were within a standard deviation of each other for the two sampling times (Fig. 1). It is unlikely, that the longer sampling time is introducing bias into our data. We do observe a significant decrease in diversity when comparing the air samples by lab. The Genesis lab (ISO 4 equivalent) has a lower median number of ASV’s (45.5) than the other labs (62). Median values for Shannon Entropy (3.717 vs. 3.430) and Faith Phylogenetic Diversity (3.796 vs. 3.548) are also lower for Genesis, but those values are with one standard deviation of each other for the different sampling times. This is consistent with previous culture-based results suggesting that the environment in cleanrooms tends to select for a core group of organisms capable of surviving under dry, low nutrient, conditions. The presence of the ASV’s mapping to Cupravidus and Thermus in our sequencing blanks and controls suggests that several of the most common organisms in our samples represent contaminants from the reagents used to perform the DNA extractions and sequencing. Further work is needed to identify these contaminants, remove them from our data and recalculate the diversity statistics. This is a systematic error. Therefore, we do not expect removing the sequencing contaminants to change our conclusions. Longer air sample collection times appear to result in slightly higher diversity and do not bias the results towards “hardy” bacteria like spore-formers. Based on these preliminary results we conclude that sampling at least 3,000 liters of air is sufficient to capture the microbial diversity of cleanrooms, and that air samples can also be collected overnight without negatively impacting diversity. These results allow us to be flexible when designing microbial monitoring plans so that they do not interfere with routine lab activity. References: 1. Regberg, A. B. et al. 49th Lunar and Planetary Science Conference (2018). 2. The United States Pharmacopeial Convention. USP General Chapter <1116> (2013). 3. Regberg, A. B., et al. 54th Lunar and Planetary Science Conference (2023). 4. Regberg, A. B. et al. 53rd Lunar and Planetary Science Conference ( 2022). 5. Davis, R. E.,et al. 50th Lunar and Planetary Science Conference (2019). 6. Qiagen. MagAttract® PowerMicrobiome® DNA/RNA EP Kit Handbook. (2018). 7. Walters, W. et al. mSystems 1, (2015). 8. Callahan, B. J. et al. Nat. Methods 13, 581–583 (2016). 9. Hall, M. & Beiko, R. G. Microbiome Analysis: Methods and Protocols113–129 (Springer, 2018). 10. Philipson, C. et al. Bio-Protoc. 7, e2622 (2017).

A. B. Regberg↗
DOE OSTI2026

Statistical generic design of glass and optimization: Selective review on oxide glasses

Designing a single glass composition for a multidimensional property space is challenging, and the difficulty increases with the number of design criteria. Traditionally, the task is accomplished using multiple statistical models that describe the relationships between composition (C) and property (P) values, i.e., C-P models. Recently, the structure (S)-property (P) statistical modeling has emerged as a complementary approach. The S-P modeling approach has also been shown to be a preferred method for modeling glass properties, particularly when a small data set is available, such as in single-component studies, or when strong nonlinearities exist between composition and properties. The combined model package, C-S-P, implements the concept of generic glass design, i.e., designing glass for performance by first selecting a specific or optimized set of glass network structural groups using S-P models and then transferring the designed structures (genes) to a particular composition using C-S models. This article reviews a set of supporting cases from the previous C-S-P modeling studies of phosphate, silicate, and borosilicate glasses, which are relevant for many critical commercial applications. The methodology for developing the statistical C-S-P database is presented, enabling the application of P?S?C to achieve a generic glass design and optimization, targeting multiple design criteria for both performance and processing properties simultaneously.

Network structure↗
DOE OSTI2021

Binding mechanism and binding free energy of amino acids and citrate to hydroxyapatite surfaces as a function of crystallographic facet, pH, and electrolytes

Hydroxyapatite (HAP) is the major mineral phase in bone and teeth. The interaction of individual amino acids and citrate ions with different crystallographic HAP surfaces has remained uncertain for decades, creating a knowledge gap to rationally design interactions with peptides, proteins, and drugs. In this contribution, we quantify the binding mechanisms and binding free energies of the 20 end-capped natural amino acids and citrate ions on the basal (001) and prismatic (010)/(020) planes of hydroxyapatite at pH values of 7 and 5 for the first time at the molecular scale. We utilized over 1500 steered molecular dynamics simulations with highly accurate potentials that reproduce surface and hydration energies of (hkl) hydroxyapatite surfaces at different pH values. Charged residues demonstrate a much higher affinity to HAP than charge-neutral species due to the formation of superficial ion pairs and ease of penetration into layers of water molecules on the mineral surface. Binding free energies range from 0 to -60 kJ/mol and were determined with ~10% uncertainty. The highest affinity was found for citrate, followed by Asp(-) and Glu(-), and followed after a gap by Arg(+), Lys(+), as well as by His(+) at pH 5. The (hkl)-specific area density of calcium ions, the protonation state of phosphate ions, and subsurface directional order of the ions in HAP lead to surface-specific binding patterns. Amino acids without ionic side groups exhibit weak binding, between -3 and 0 kJ/mol, due to difficulties to penetrate the first layer of water molecules on the apatite surfaces. We explain recognition processes that remained elusive in experiments, in prior simulations, discuss agreement with available data, and reconcile conflicting interpretations. In conclusion, the findings can serve as useful input for the design of peptides, proteins, and drug molecules for the modification of bone and teeth-related materials, as well as control of apatite mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In-situ synchrotron X-ray diffraction of hydroxyapatite-zirconia composite during conventional and flash sintering

Here, we conducted in-situ X-ray diffraction to study the crystalline phase evolution in hydroxyapatite-zirconia composites during both conventional and flash sintering processes. Additionally, we examined the thermal history and microstructure of the composite under these sintering conditions. Despite both sintering methods reaching similar average temperatures, they yielded distinct results in terms of crystalline phase composition and microstructure. In the flash sintered samples, we observed a complete transformation of hydroxyapatite into α- tricalcium phosphate and a complete tetragonal to cubic phase transition in zirconia. Conversely, the conventionally sintered samples remained practically stable. Notably, the flash sintered samples exhibited needle-like microstructures, which were absent in their conventionally sintered counterparts. This divergence suggests that the application of an electric field plays a role in generating athermal effects during the sintering of hydroxyapatite-zirconia composites.

36 MATERIALS SCIENCE↗